PB1 Chapter 3 Hand Tools Review

Ace your homework & exams now with Quizwiz!

True

A chisel is used for cutting, trimming, fitting, and shaping wood

Hand screw clamp

A clamp consisting of two wooden jaws that are connected by a pair of threaded steel bars with handles is called a

Pipe clamp

A clamp that consists of pipe with plates or jaws that press againist a material and that are tightened by a screw shaft handle is called a.

Gain

A recess cut that is made with a chisel in order to receive a hinge is called a(n)

True

Before making a cut with a handsaw, the material being cut should be secured to a bench or to a pair of sawhorses

False

Block planes are designed for use with two hands

False

Chisels are manufactured in one size only

True

Clamps are often used to position and secure materials so the materials can be safely cut or shaped.

Fastening tools

Clamps, screwdrivers, and wrenches fall into what tool type category?

True

Ear protection should always be worn when dring nails with a hammer, as the soud of steel striking steel can cause damage to hearing.

True

Eye protection should always be worn when using a hammer.

True

Hand tools require safe and proper handling to avoid injury.

Cutting tools

Handsaws, chisels, and knives fall into what tool type category?

True

Materials must be placed to allow the free hand to secure the mateial without haning to be dangerously close to the saw blade.

True

Nails must be driven straight and true without wasting time and energy, and without damaging valuable materilas

False

Planes are cutting tools used to smooth the surface of wood or to remove material from componeents to allow them to fit together properly.

Sharping tools

Rasps and planes fall into what tool categor?

True

Side cutting pliers are used to grip small objects and to cut or bend wire, cable, or nails.

False

Striking other hardened steel surfaces with a claw hammer is okay

20*-25*

The blade of the block plane is at an angle of

True

The blade of the utility knife is razor-sharp and can cause severe cuts

25*-30*

The blade, or iron, of the chisel is a flat steel bar tht is beveled on the end at a ___ angle.

False

The fewer teeth a handsaw has the smoother the cut will be.

False

The more the plane iron extends below the base of the plane, the less material it removes

True

To avoid cuts, keep hands and other parts of the body well away form the sharp blades and edges of hand tools

True

To prevent dents and avoid damage to finish work, a wood block or putty knife can be placed under the head of the hammer before gripping the nail with the claw.

Striking tools

Trim hammers, mallets, and roofing hatchets fall into what tool type category?

False

Using a plane against the grain is easier and prduces a smoother edge than using a plane with the grain.

False

Using hand tools or any tool safely and efficiently requires little skill or training

Face

When driving a nail, which part of the hammer strikes the nail?

True

When swinging the hammer, the path of the swing should be clear of obstructions.

True

When using a hammer, a firm grip should be kept on the handle at all times

True

When working with a chisel, the work piece should be secured so that it does not move.

Bar clamp

Which of the following clamps consists of a long metal bar with plates or jaws that press against a material and are then tightened by either a powerful spring or a screw shaft handle

C-clamps

Which of the following clamps has a C-shape and a threaded metal shaft fitted with a show tht is designed to swivel?

Nail set

Which of the following tools consists of a roud, tapered metal shaft that has a cupped tip designed to fit on top of a brad of finish nail


Related study sets

Educational Psychology Practice Quizzes

View Set

Reproductive System --Structure & Function

View Set