PB1 Chapter 3 Hand Tools Review
True
A chisel is used for cutting, trimming, fitting, and shaping wood
Hand screw clamp
A clamp consisting of two wooden jaws that are connected by a pair of threaded steel bars with handles is called a
Pipe clamp
A clamp that consists of pipe with plates or jaws that press againist a material and that are tightened by a screw shaft handle is called a.
Gain
A recess cut that is made with a chisel in order to receive a hinge is called a(n)
True
Before making a cut with a handsaw, the material being cut should be secured to a bench or to a pair of sawhorses
False
Block planes are designed for use with two hands
False
Chisels are manufactured in one size only
True
Clamps are often used to position and secure materials so the materials can be safely cut or shaped.
Fastening tools
Clamps, screwdrivers, and wrenches fall into what tool type category?
True
Ear protection should always be worn when dring nails with a hammer, as the soud of steel striking steel can cause damage to hearing.
True
Eye protection should always be worn when using a hammer.
True
Hand tools require safe and proper handling to avoid injury.
Cutting tools
Handsaws, chisels, and knives fall into what tool type category?
True
Materials must be placed to allow the free hand to secure the mateial without haning to be dangerously close to the saw blade.
True
Nails must be driven straight and true without wasting time and energy, and without damaging valuable materilas
False
Planes are cutting tools used to smooth the surface of wood or to remove material from componeents to allow them to fit together properly.
Sharping tools
Rasps and planes fall into what tool categor?
True
Side cutting pliers are used to grip small objects and to cut or bend wire, cable, or nails.
False
Striking other hardened steel surfaces with a claw hammer is okay
20*-25*
The blade of the block plane is at an angle of
True
The blade of the utility knife is razor-sharp and can cause severe cuts
25*-30*
The blade, or iron, of the chisel is a flat steel bar tht is beveled on the end at a ___ angle.
False
The fewer teeth a handsaw has the smoother the cut will be.
False
The more the plane iron extends below the base of the plane, the less material it removes
True
To avoid cuts, keep hands and other parts of the body well away form the sharp blades and edges of hand tools
True
To prevent dents and avoid damage to finish work, a wood block or putty knife can be placed under the head of the hammer before gripping the nail with the claw.
Striking tools
Trim hammers, mallets, and roofing hatchets fall into what tool type category?
False
Using a plane against the grain is easier and prduces a smoother edge than using a plane with the grain.
False
Using hand tools or any tool safely and efficiently requires little skill or training
Face
When driving a nail, which part of the hammer strikes the nail?
True
When swinging the hammer, the path of the swing should be clear of obstructions.
True
When using a hammer, a firm grip should be kept on the handle at all times
True
When working with a chisel, the work piece should be secured so that it does not move.
Bar clamp
Which of the following clamps consists of a long metal bar with plates or jaws that press against a material and are then tightened by either a powerful spring or a screw shaft handle
C-clamps
Which of the following clamps has a C-shape and a threaded metal shaft fitted with a show tht is designed to swivel?
Nail set
Which of the following tools consists of a roud, tapered metal shaft that has a cupped tip designed to fit on top of a brad of finish nail
