Supply Chain Ch 11 and 11S
7) Transferring to external vendors a firm's activities that have traditionally been internal is known as ________.
Answer: outsourcing
12) Of the four stages of supplier selection, the stage at which the factor weighting approach would be used is ________.
Answer: supplier evaluation
1) Even though a firm may have a low cost strategy, supply-chain strategy can select suppliers primarily on response or differentiation.
Answer: FALSE
1) With the "many suppliers" sourcing strategy, the order usually goes to the supplier that offers the highest quality.
Answer: FALSE
2) Designing distribution networks to meet customer expectations suggests three criteria: (1) rapid response, (2) cost, and (3) service.
Answer: FALSE
2) The new model of a tight, fast, low-inventory supply chain, operating across political and cultural boundaries, has reduced the overall level of supply chain risk.
Answer: FALSE
2) The supply chain for a brewery would include raw ingredients such as hops and barley but not the manufactured goods such as bottles and cans.
Answer: FALSE
2) Vertical integration, whether forward or backward, requires the firm to become more specialized.
Answer: FALSE
2) Waterways are an attractive distribution system when speed is more important than shipping cost.
Answer: FALSE
3) Cross-sourcing describes the practice of having two suppliers provide every component.
Answer: FALSE
3) The supply chain management opportunity called postponement involves delaying deliveries to avoid accumulation of inventory at the customer's site.
Answer: FALSE
3) When using the low-cost strategy for supply chain management, a firm should use buffer stocks to ensure speedy supply.
Answer: FALSE
4) Improvements in security, especially regarding the millions of shipping containers that enter the U.S. each year, are being held back by the lack of technological advances.
Answer: FALSE
4) Keiretsu refers to a company coalition that is part collaboration, part purchasing from many suppliers, and part vertical integration.
Answer: FALSE
5) A firm that employs a response strategy should minimize inventory throughout the supply chain.
Answer: FALSE
6) Supply chain decisions are not generally strategic in nature, because purchasing is not a large expense for most firms.
Answer: FALSE
7) Because service firms do not acquire goods and services externally, their supply chain management issues are insignificant.
Answer: FALSE
1) Outsourcing refers to transferring a firm's activities that have traditionally been internal to external suppliers.
Answer: TRUE
1) The bullwhip effect refers to the increasing fluctuations in orders that often occur as orders move through the supply chain.
Answer: TRUE
1) Use of a diversified supply base represents one of the most common supply chain risk reduction tactics for several different supply chain risk categories.
Answer: TRUE
2) Drop shipping results in time and shipping cost savings.
Answer: TRUE
2) One classic type of negotiation strategy is the market-based price model.
Answer: TRUE
2) Outsourcing is a form of specialization that allows the outsourcing firm to focus on its key success factors.
Answer: TRUE
3) A fast-food retailer that acquired a spice manufacturer would be practicing backward integration.
Answer: TRUE
3) Logistics management can provide a competitive advantage through improved customer service.
Answer: TRUE
3) The objective of the make-or-buy decision is to help identify the products and services that can be obtained externally.
Answer: TRUE
3) While the prices that consumers pay are often inflexible, a significant number of final prices paid in business-to-business transactions are negotiated.
Answer: TRUE
4) A blanket order is a long-term purchase commitment to a supplier for items that are to be delivered against short-term releases to ship.
Answer: TRUE
4) Savings in the supply chain exert more leverage as the firm's net profit margin decreases.
Answer: TRUE
19) ________ is developing the ability to produce goods or services previously purchased or actually buying a supplier or a distributor.
Answer: Vertical integration
21) ________ rely on a variety of supplier relationships to provide services on demand.
Answer: Virtual companies
17) Local optimization, incentives, and large lots all contribute to ________ about what is really occurring in the supply chain.
Answer: distortions of information
22) Virtual companies are also known as ________ .
Answer: hollow corporations or network companies
6) The ________ decision involves choosing between producing a component or a service internally and purchasing it externally.
Answer: make-or-buy
13) Suppliers are also known as ________.
Answer: vendors
17) Identify three common features of contracts between buyers and suppliers.
Answer: (1) quantity discounts; (2) buybacks; (3) revenue sharing
20) ________ is a Japanese term that describes suppliers who become part of a company coalition.
Answer: Keiretsu
10) ________ is an approach that seeks efficiency of operations through the integration of all material acquisition, movement, and storage activities.
Answer: Logistics management
18) ________ involves delaying any modifications or customization to the product as long as possible in the production process.
Answer: Postponement
14) What is e-procurement?
Answer: Purchasing facilitated through the Internet.
19) ________ involves reducing the number of variations in materials and components as an aid to cost management.
Answer: Standardization
15) ________ describes the coordination of all supply chain activities, starting with raw materials and ending with a satisfied customer.
Answer: Supply chain management
1) Channel assembly, which sends components and modules to be assembled by a distributor, treats these distributors as manufacturing partners.
Answer: TRUE
1) Operations managers are finding online auctions a fertile area for disposing of discontinued inventory.
Answer: TRUE
16) Identify the four stages of supplier selection.
Answer: (1) supplier evaluation; (2) supplier development; (3) negotiations; (4) contracting
12) Which of the following is a primary supplier selection criterion for a firm pursuing a differentiation strategy? A) product development skills B) cost C) capacity D) speed E) flexibility
Answer: A
4) What type of negotiating strategy requires the supplier to open its books to the purchasers? A) cost-based price model B) market-based price model C) competitive bidding D) price-based model E) transparent negotiations
Answer: A
5) What is the practice of keeping a product generic as long as possible before customizing? A) postponement B) keiretsu C) vendor-managed inventory D) forward integration E) backward integration
Answer: A
6) By which distribution system is more than 90 percent of U.S. coal shipped? A) railroads B) trucks C) waterways D) pipelines E) none of the above
Answer: A
6) Local optimization is a supply-chain complication best described as: A) optimizing one's local area without full knowledge of supply chain needs. B) obtaining very high production efficiency in a decentralized supply chain. C) the prerequisite of global optimization. D) the result of supply chains built on suppliers with compatible corporate cultures. E) the opposite of the bullwhip effect.
Answer: A
6) With cross-sourcing, how many suppliers provide each component on a regular basis (i.e., excluding backup suppliers)? A) 1 B) 2 C) 3 D) equal to the total number of components E) equal to the number of countries to which the final product is sold
Answer: A
7) What are the four stages of supplier selection? A) supplier evaluation, supplier development, negotiations, and contracting B) supplier evaluation, negotiations, supplier acquisition, and supplier development C) introduction, growth, maturity, and decline D) supplier evaluation, supplier development, negotiations, and centralized purchasing E) negotiations, contracting, centralized purchasing, and E-procurement
Answer: A
8) Warehouses sometimes perform certain other functions besides storing goods. Which of the following is NOT typically one of those functions? A) purchasing B) postponement C) break-bulk activities D) consolidation point E) cross-docking
Answer: A
10) In most manufacturing industries, which of the following would likely represent the largest cost to the firm? A) transportation B) purchasing C) insurance D) financing E) advertising
Answer: B
12) Vertical integration appears particularly advantageous when the organization has: A) a very specialized product. B) a large market share. C) a very common, undifferentiated product. D) little experience operating an acquired vendor. E) purchases that are a relatively small percent of sales.
Answer: B
13) A rice mill in south Louisiana purchases the trucking firm that transports packaged rice to distributors. This is an example of which of the following? A) horizontal integration B) forward integration C) backward integration D) current transformation E) keiretsu
Answer: B
14) Japanese manufacturers often pursue a strategy that is part collaboration, part purchasing from a few suppliers, and part vertical integration. What is this approach called? A) kanban B) keiretsu C) samurai D) poka-yoke E) kaizen
Answer: B
15) A furniture maker has delivered a dining set directly to the end consumer rather than to the furniture store. The furniture maker is practicing which of the following? A) postponement B) drop shipping C) channel assembly D) passing the buck E) float reduction
Answer: B
16) Which of the following is NOT an advantage of a virtual company? A) speed B) total control over every aspect of the organization C) specialized management expertise D) low capital investment E) flexibility
Answer: B
5) E-procurement: A) works best in long-term contract situations but is not suited for auctions. B) is the same thing as Internet purchasing. C) has many benefits but requires a lot of paperwork. D) is illegal in all states except Nevada and New Jersey. E) All of the above are true of e-procurement.
Answer: B
7) Which sourcing strategy is particularly common when the products being sourced are commodities? A) few suppliers B) many suppliers C) keiretsu D) vertical integration E) virtual companies
Answer: B
8) A restaurant runs a special promotion on lobster and plans to sell twice as many lobsters as usual. When this large order is sent to the distributor, the distributor assumes the large size is a trend, not a one-time event. The distributor therefore places an even larger order with the lobsterman. This behavior is the result of which of the following? A) double marginalization B) the bullwhip effect C) CPFR D) postponement E) vendor-managed inventory
Answer: B
10) Drop shipping: A) is equivalent to cross-docking. B) is the opposite of a blanket order. C) means the supplier will ship directly to the end consumer, rather than to the seller. D) is the same thing as keiretsu. E) is a good reason to find a new firm to ship your products.
Answer: C
10) In what type of auction does a buyer initiate the process by submitting a description of the desired product or service? A) traditional B) buyer C) Dutch D) French E) Mexican
Answer: C
10) Which of the following best describes vertical integration? A) sell products to a supplier or a distributor B) develop the ability to produce products that complement the original product C) produce goods or services previously purchased D) develop the ability to produce the specified good more efficiently than before E) build long-term partnerships with a few suppliers
Answer: C
11) A fried chicken fast-food chain that acquired feed mills and poultry farms has performed which of the following? A) horizontal integration B) forward integration C) backward integration D) current transformation E) job expansion
Answer: C
11) Among which of the following industries are purchasing costs the LOWEST percentage of sales? A) automobiles B) petroleum C) restaurants D) lumber E) chemicals
Answer: C
14) Which of the following statements is true regarding the leverage of supply chain savings? A) Supply chain leverage is about the same for all industries. B) Supply chain savings exert more leverage as the firm's purchases are a smaller percent of sales. C) Supply chain savings exert more leverage as the firm's net profit margin decreases. D) Supply chain leverage depends only upon the percent of sales spent in the supply chain. E) None of the above is true.
Answer: C
15) The Japanese concept of a company coalition of suppliers is: A) poka-yoke. B) kaizen. C) keiretsu. D) dim sum. E) illegal.
Answer: C
17) When Daimler and BMW pooled resources to develop standardized auto components, the sourcing strategy could best be described by which of the following? A) keiretsu B) virtual companies C) joint venture D) vertical integration E) few suppliers
Answer: C
5) Which of the following describes using one supplier for a component and a second supplier for another component, where each supplier acts as a backup for the other? A) outsourcing B) dual-sourcing C) cross-sourcing D) backup-sourcing E) parallel-sourcing
Answer: C
5) Which one of the following distribution systems offers speed and reliability when emergency supplies are needed overseas? A) trucking B) railroads C) airfreight D) waterways E) pipelines
Answer: C
8) Which of the following is NOT an advantage of the "few suppliers" sourcing strategy? A) suppliers have a learning curve that yields lower transaction and production costs B) suppliers are more likely to understand the broad objectives of the end customer C) less vulnerable trade secrets D) creation of value by allowing suppliers to have economies of scale E) suppliers' willingness to provide technological expertise
Answer: C
9) ________ postpones final assembly of a product so the distribution channel can assemble it.
Answer: Channel assembly
9) ________ describes using one supplier for a component and a second supplier for another component, where each supplier acts as a backup for the other.
Answer: Cross-sourcing
11) A carpet manufacturer has delivered carpet directly to the end consumer rather than to the carpet dealer. The carpet manufacturer is practicing which of the following? A) postponement B) cross-docking C) channel assembly D) drop shipping E) float reduction
Answer: D
12) Hewlett-Packard withholds customization of its laser printers as long as possible. This is an example of which of the following? A) vendor-managed inventory B) standardization C) backward integration D) postponement E) timely customization
Answer: D
4) Outsourcing: A) transfers traditional internal activities to outside vendors. B) utilizes the efficiency that comes with specialization. C) allows the outsourcing firm to focus on its key success factors. D) All of the above are true of outsourcing. E) None of the above is true of outsourcing.
Answer: D
5) The transfer of some of what are traditional internal activities and resources of a firm to outside vendors is: A) a standard use of the make-or-buy decision. B) not allowed by the ethics code of the Supply Management Institute. C) offshoring. D) outsourcing. E) keiretsu.
Answer: D
5) Which one of the following is NOT one of the six sourcing strategies? A) negotiation with many suppliers B) vertical integration C) keiretsu D) short-term relationships with few suppliers E) virtual companies
Answer: D
6) A disadvantage of the "few suppliers" sourcing strategy is: A) the risk of not being ready for technological change. B) the lack of cost savings for customers and suppliers. C) possible violations of the Sherman Antitrust Act. D) the high cost of changing partners. E) the suppliers are less likely to understand the broad objectives of the procuring firm and the end customer.
Answer: D
6) What are the three classic types of negotiation strategies? A) supplier evaluation, supplier development, and supplier selection B) Theory X, Theory Y, and Theory Z C) many suppliers, few suppliers, and keiretsu D) cost-based price model, market-based price model, and competitive bidding E) traditional auctions, reverse auctions, and online exchanges
Answer: D
7) Which of the following is NOT one of the risk mitigation tactics for the supply chain risk category of suppliers failing to deliver? A) use multiple suppliers B) effective contracts with penalties C) subcontractors on retainer D) require overnight delivery E) pre-planning
Answer: D
7) While freight rates are often based on very complicated pricing systems, in general, the primary freight price factor is based on which of the following attributes? A) damage record B) on-time delivery C) door-to-door service D) speed of shipment E) consolidation capabilities
Answer: D
8) Which of the following characteristics is NOT common to all four of Darden Restaurants' supply channels? A) supplier qualification B) product tracking C) independent audits D) refrigeration E) just-in-time delivery
Answer: D
9) Which of the following is NOT a condition that favors the success of vertical integration? A) availability of capital B) availability of managerial talent C) sufficiently high demand D) small market share E) All of the above favor the success of vertical integration.
Answer: D
9) Which of the following is NOT a typical benefit of centralized purchasing? A) leverage purchase volume for better pricing B) develop specialized staff expertise C) reduce the duplication of tasks D) reduce lead times E) promote standardization
Answer: D
9) Which of the following is NOT an opportunity for effective management in the supply chain? A) accurate "pull" data B) vendor-managed inventory C) postponement D) local optimization E) CPFR
Answer: D
13) All EXCEPT which of the following are "opportunities" in managing the integrated supply chain? A) postponement B) drop shipping C) blanket orders D) standardization E) line balancing
Answer: E
13) For which corporate strategy(ies) should supply chain inventory be minimized? A) low cost B) response C) differentiation D) low cost and response E) low cost and differentiation
Answer: E
14) Which of the following is an advantage of the postponement technique? A) reduction in automation B) early customization of the product C) better quality of the product D) reduction in training costs E) reduction in inventory investment
Answer: E
16) TAL Apparel's management of its supply chain for Stafford shirts sold in JCPenney in an example of which of the following? A) blanket orders B) standardization C) postponement D) lot size reduction E) single-stage control of replenishment
Answer: E
18) Which of the following best describes Vizio's sourcing strategy? A) few suppliers B) keiretsu C) joint venture D) vertical integration E) virtual company
Answer: E
4) What term is used to describe the outsourcing of logistics? A) e-logistics B) shipper-managed inventory (SMI) C) hollow logistics D) sub-logistics E) third-party logistics (3PL)
Answer: E
7) The bullwhip effect: A) occurs as orders are relayed from retailers to distributors to wholesalers to manufacturers. B) results in increasing fluctuations at each step of the sequence. C) increases the costs associated with inventory in the supply chain. D) occurs because of distortions in information in the supply chain. E) All of the above are true.
Answer: E
8) Which of the following devices represents an opportunity for technology to improve security of container shipments? A) devices that identify truck and container location B) devices that sense motion C) devices that measure radiation or temperature D) devices that can communicate the breaking of a container lock or seal E) all of the above
Answer: E
8) Which of the following would NOT be subject to negotiation between a buyer and supplier? A) price B) credit and delivery terms C) quality standards D) cooperative advertising agreements E) All of the above could be negotiated.
Answer: E
9) Which of the following would NOT typically be considered as part of a manufacturing firm's supply chain? A) suppliers B) distributors C) wholesalers D) retailers E) landscaping contractors
Answer: E
11) ________ is the term describing purchasing facilitated through the Internet.
Answer: E-Procurement
1) As the number of facilities increases, total logistics costs tend to follow a curve that first rises, then declines.
Answer: FALSE