CITN 220 Chapter 4
is the measure of usable data transferred over a given period of time.
Goodput
Unit of Bandwidth
Bits per sec (bps) 1 Kilobits per sec (Kbps) 1000 Megabits per sec (Mbps) 1,000,000 Gigabits per sec (Gbps) 1,000,000,000 Terabits per sec (Tbps) 1,000,000,000,000
Which standards organization oversees development of wireless LAN standards?
IEEE
refers to the amount of time, including delays, for data to travel from one given point to another.
Latency
Which of the following counters EMI and RFI by using shielding techniques and special connectors?
STP
What is the definition of bandwidth?
The amount of data that can flow from one place to another in a given amount of time
is the measure of the transfer of bits across the media over a given period of time
Throughput
True or false? The physical layer is only concerned with wired network connections.
True
Which procedure is used to reduce the effect of crosstalk in copper cables?
Twisting opposing circuit wire pairs together
Which of the following is the most common network media?
UTP
Which of the following wireless standards is best suited for industrial and IoT environments?
Zigbee
is the name for the capacity of a medium to carry data?
bandwidth
Which of the following wireless standards is used for Personal Area Networks (PANs) and allows devices to communicate over distances of 1 to 100 meters?
bluetooth
What is a characteristic of UTP cabling?
cancellation
Which of the following attaches antennas to wireless devices? It can also be bundled with fiber-optic cabling for two-way data transmission.
coaxial
Which of the following terminates with BNC, N type and F type connectors?
coaxial
The physical layer of the receiving device passes bits up to which higher level layer?
data link
True or false. Wireless LANs operate in full-duplex allowing all devices to send or receive data at the same time so the number of users does not impact performance.
false
True or false. Wireless is not well suited for enterprise networks.
false
True or false? When a frame is encoded by the physical layer, all bits are sent over the media at the same time.
false
Which media uses patterns of light to represent bits?
fiber-optic
What PDU is received by the physical layer for encoding and transmission?
frame
correctly describes frame encoding
it converts bits into a predefined code in order to provide a predictable pattern to help distinguish dat bit from control bits
What is one advantage of using fiber optic cabling rather than copper cabling?
it is able to carry signals much farther than copper cabling
Which of the following fiber-optic cable types can help data travel approximately 500 meters?
multimode
Which of the following fiber-optic cable types is used within a campus network?
multimode
Which of the following fiber-optic cable types use light emitting diodes (LEDs) as a data light source transmitter?
multimode
A network administrator is troubleshooting connectivity issues on a server. Using a tester, the administrator notices that the signals generated by the server NIC are distorted and not usable. In which layer of the OSI model is the error categorized?
physical layer
What type of cable is used to connect a workstation serial port to a Cisco router console port?
rollover
Which of the following fiber-optic cable types can travel approximately 100 km?
single mode
Which of the following fiber-optic cable types is used to connect long-distance telephony and cable TV applications?
single-mode
Which of the following fiber-optic cable types use lasers in a single stream as a data light source transmitter?
single-mode
Which type of UTP cable is used to connect a PC to a switch port?
straight through
characteristic describes crosstalk?
the distortion of the transmitted messages from signals carried in adjacent wires
A network administrator is designing a new network infrastructure that includes both wired and wireless connectivity. Under which situation would a wireless connection be recommended?
the end user device needs mobility when connecting to the network
What is indicated by the term throughput?
the measure of bits transferred across the media over a given period of time
A wireless LAN is being deployed inside the new one room office that is occupied by the park ranger. The office is located at the highest part of the national park. After network testing is complete, the technicians report that the wireless LAN signal is occasionally affected by some type of interference. What is a possible cause of the signal distortion?
the microwave oven
Why are two strands of fiber used for a single fiber optic connection?
they allow for full-duplex connectivity
is a measure of the transfer of bits across the media?
throughput
What is the purpose of the OSI physical layer?
transmitting bit across the local media
Which media uses patterns of microwaves to represent bits?
wireless