Copilot Duties

Specific 1

Notify pilot when 1000 feet prior to assigned altitude.

Specific 7

Complete landing checklist with pilot/flight engineer and review at 500' AGL

Specific 12

Make all necessary entries into the CDU 7000. Flight modifications shall be verified by the pilot prior to the copilot executing the flight plan.

Specific 2

Record approach/landing speeds when given in the Approach checklist

General 4

Record the following information when received from the controlling authority: A. Headings, altitudes assigned. B. Communications frequencies assigned. C. Clearances. D. Applicable airport information (runway, altimeter, wind, etc.)

Specific 3

When pilot calls for landing gear extension, repeat approach/landing speeds. Repeat decision height/minimum descent altitude as applicable.

General 2

Ensure applicable navigation and communications receivers are tuned to correct frequencies during the approach.

General 1

Back up the pilot during all phases of the approach, provicing assistance as required. Ensure checklists are completed.

Specific 8

Be prepared to assist the pilot as directed in the event a missed approach procedure must be executed.

Specific 6

Call contact and runway location (left/right) when runway or approach lights are in sight. Repeat approach/landing speeds.

Specific 10

Call out "Approach mode active" during FMS approaches (FMS 1 or 2 selected as course search) when RNP value sequences to RNP 0.3 (typically 2NM from the final approach fix) and APPROACH is displayed on the CDU-7000

Specific 5

Call out "Approaching MDA/DH" when 100 feet above minimums.

Specific9

Call out any rate of descent in excess of 1000 fpm when on final approach

Specific 4

Call out any time airspeed is slower than specified

General 3

Handle all communications during terminal procedures.

Specific 11

Set the desired altitude in the ADDU and call out the altitude. The pilot shall repeat the desired altitude after verifying the altitude is properly set.