Fuels CDC (All URE)

(202) Which of these acts as the United States Air Force's service control point? .a Air Force Petroleum Office. b. Defense Logistics Agency Energy. c. Defense Logistics Agency Energy regions. d. Air Force Installation & Mission Support Center.

.a Air Force Petroleum Office.

11. (004) The technical order (TO) that explains the procedures for reporting improvements in TOs is A. TO OO-5-1, AF TECHNICAL ORDER SYSTEM B. TO OO-5-15 AF TIME COMPLIANCE C. TO OO-5-18 METHODS AND PROCEDURES AF TECHNICAL ORDER NUMBERING SYSTEM D. TO OO-5-3, METHODS AND PROCEDURES AF TECHNICAL ORDER LIFE CYCLE MANAGEMENT

A. TO OO-5-1, AF TECHNICAL ORDER SYSTEM

Unit type codes have how many alphanumeric characters designating a manpower, equipment or both manpower and equipment force that is tasked with completing a specific mission A. 6 B. 5. C. 4 D. 3

B. 5.

The FORCE system is not capable of A. A/C REFUELING B. A/C DEFUELING C. TANK TRUCK OFF-LOADING D. STORAGE BLADDER TRANSFERRING

B. A/C DEFUELING

Who forms a team to maintain command and control of the flight and is referred to as the Fuels Management Team? A. FUELS MANAGER AND FUELS SUPERVISOR B. FLIGHT COMMANDER AND FUELS MANAGER C. FUELS SUPERINTENDENT AND FUELS MANAGER D. FLIGHT COMMANDER AND FUELS SUPERVISOR

B. FLIGHT COMMANDER AND FUELS MANAGER

A three digit code that identifies personnel with special training or experience to meet contingency and base-level requirements is called a.. A. SPECIAL EXPERIENCE INDICATOR B. SPECIAL EXPERIENCE IDENTIFIER C. SPECIFIC EXPERIENCE INDICATIOR D. SPECIFIC EXPERIENCE IDENTIFIER

B. SPECIAL EXPERIENCE IDENTIFIER

What character in AFSC is used to identify the Fuels career field? A. 0 B. 2 C. F D. X

C. F

Technical orders that cover installing, operating, troubleshooting, repairing, calibrating, servicing or handling AF military systems are called A. INDEX TO B. TIME COMPLICANCE TO (TCTO) C. OPERATIONS AND MAINTENANCE TO'S D. METHODS AND PROCEDURES TO'S (MPTO)

C. OPERATIONS AND MAINTENANCE TO'S

What technical order is issued to prevent use od equipment or procedures due to hazardous safety conditions that could cause a serious injury or death? A. SAFETY B. ABBREVIATED C. TIME COMPLIANCE D. METHODS AND PROCEDURES

C. Time compliance

The General AF specialty code (AFSC) used when you enter basic training is ? A. 2FO11 B. 2FO31 C. 2FO51 D. 9T000

D. 9T000

What system was developed to complement and eventually replace the Fuels support equipment components.. A. AERRIAL BULK FUEL DELIVERY B. FORWARD AREA REFUELING POINT EQUIPMENT C. CRYOTAINER MAINTENANCE AND SUPPORT EQUIP D. FUELS OPERATIONAL READINESS CAPABILITY EQUIP

D. FUELS OPERATIONAL READINESS CAPABILITY EQUIP

35. (008) Which vehicles do not have to yield the right of way to moving aircraft? a. "Follow Me" trucks. b. Refueling units. c. Fire trucks. d. Tugs.

a. "Follow Me" trucks.

28. (007) At what temperature in degrees Fahrenheit (°F) will liquid oxygen (LOX) vaporize into a gaseous state? a. -297 °F. b. -321 °F. c. -379 °F. d. -395 °F.

a. -297 °F.

26. (006) What is the freeze point for Jet-A jet fuel? a. -40 degrees Fahrenheit (F). b. -58 degrees Celsius (C). c. -51 °F. d. -40 °C.

a. -40 degrees Fahrenheit (F).

16. (206) Which radio transmission 10 code means request fire truck at location? a. 10-18. b. 10-19. c. 10-87. d. 10-97.

a. 10-18.

7. (206) Within how many feet of an aircraft fuel vent outlet can only approved intrinsically safe commercial mobile devices be operated? a. 10. b. 25. c. 50. d. 75.

a. 10.

23. (006) What is the minimum temperature in degrees Fahrenheit (°F) at which combustible liquids have a flash point? a. 100 °F. b. 120 °F. c. 140 °F. d. 150 °F.

a. 100 °F.

54. (008) The water pressure fire extinguishers are effective on which class of fire? a. A. b. B. c. C. d. D.

a. A.

32. (008) What is the process of connecting two or more metallic objects together using a conductor? a. Bonding. b. Strapping. c. Equalizing. d. Grounding.

a. Bonding.

40. (008) A fuel spill less than two feet in any plane direction is classified in this spill category a. Class I. b. Class II. c. Class III. d. Class IV.

a. Class I.

36. (008) What does a flashing red and green light signal from the air traffic control tower mean to a moving vehicle on the flight line? a. General warning, use extreme caution. b. Return to starting point. c. Safe to cross. d. Stop.

a. General warning, use extreme caution

7. (210) What type of cylinder is used to perform the American Petroleum Institute (API) gravity test? a. Graduated. b. Wide-mouth. c. Precalibrated. d. Pharmaceutical

a. Graduated.

(211) When conducting a field analysis for solids using the color and particle assessment method, what device is used to remove residual fuel from a single filter monitor? a. Metal syringe. b. Vacuum flask. c. Roto-vap flask. d. Industrial syringe.

a. Metal syringe.

. (210) What action must be taken if the sample flashes upon first application of the flame during a flashpoint analysis? a. Perform a new flash point test. b. Raise the room temperature. c. Increase fuel temperature. d. Record the temperature.

a. Perform a new flash point test.

(205) All items must be contained in each servicing clipboard except a. Standard Form (SF) 91, Motor Vehicle Accident Report. b. Department of Defense (DD) Form 1898, Energy Sale Slip. c. Air Force Technical Order (AFTO) Form 422, Differential Pressure Log. d. Air Force (AF) Form 4427, Operator's Inspection Guide and Trouble Report.

a. Standard Form (SF) 91, Motor Vehicle Accident Report.

17. (005) Which type of Air Force publication includes instructions and manuals? a. Standard. b. Technical. c. Recurring. d. Specialized.

a. Standard.

15. (004) What type of recommendation must the technical content manager take action on within 40 days? a. Urgent. b. Routine. c. Emergency. d. Critical hazard.

a. Urgent.

. (207) A sample taken 6 inches below the surface of the contents of a JP-8 jet fuel bulk storage tank is called .. a. a top sample. b. an upper sample. c. an all-level sample. d. a composite sample.

a. a top sample

(206) Maintaining radio transmission discipline over the radio net is the responsibility of the fuels? a. controllers. b. management team. c. information service center superintendent. d. service center noncommissioned officer in charge (NCOIC)

a. controllers.

25. (006) The lowest temperature at which a flammable liquid gives off sufficient vapors, when mixed with air to support combustion, is known as a product's? a. fire point. b. flash point. c. lower flammable limit. d. auto ignition temperature.

a. fire point.

9. (203) An unacknowledged alarm condition that has returned to normal is indicated by a a. flashing green color. b. flashing blue color. c. steady green color. d. steady blue color.

a. flashing green color.

(211) The most accurate testing method to determine total solid content in a fuel sample is.. a. the bottle method. b. a correlation sample. c. the single weight monitor. d. the matched weight monitor.

a. the bottle method.

. (210) When conducting a flashpoint analysis, how long should the flame be applied to the vapor cup when in the lowered position? a. 0.5 second. b. 1 second. c. 1.5 seconds. d. 2 seconds.

b. 1 second.

34. (008) What is the maximum allowable speed in miles per hour (mph) when driving a specialpurpose vehicle on the flight line? a. 5 mph. b. 10 mph. c. 15 mph. d. 20 mph.

b. 10 mph.

(206) Which radio transmission 10 code means return to the fuels service center? a. 10-4. b. 10-10 . c. 10-14. d. 10-15.

b. 10-10

37. (008) When positioning a refueling vehicle for servicing, under most circumstances, you will not position it any closer than what minimum distance (feet) from any portion of an aircraft? a. 5. b. 10. c. 25. d. 50.

b. 10.

52. (008) What is the maximum amount of gallons of fuel permitted in a fuel laboratory? a. 5. b. 10. c. 20. d. 25

b. 10.

(210) What is the American Petroleum Institute (API) gravity range for Jet A fuel? a. 38-47. b. 37-51. c. 36-48. d. 35-47

b. 37-51.

39. (008) You should discontinue fuel operations when electrical storms are within how many nautical miles of a fuel servicing area a. 3. b. 5. c. 10. d. 25.

b. 5.

. (207) After you obtain a sample with an in-line sampler, how many seconds should elapse before disassembling the sampler? a. 30. b. 60. c. 90. d. 120.

b. 60.

201) Which organization provides detailed schematic charts and coordinates with the fuels management team for operating checklists on each permanently installed fuel system? a. Aircraft maintenance. b. Base civil engineering. c. Fuels information service center. d. Wing safety office and bioenvironmental engineering.

b. Base civil engineering.

41. (008) Which fuel spill classification involves an area not more than 10 feet in any plane direction a. Class I. b. Class II. c. Class III. d. Class IV

b. Class II.

27. (006) The ability of a material to transmit or conduct electricity is known as a. Resistivity. b. Conductivity. c. Flammability. d. Current density.

b. Conductivity.

(202) Comprehensive energy support for the Department of Defense (DOD) is the responsibility of which organization? a. Air Force Petroleum Office. b. Defense Logistics Agency Energy. c. Defense Logistics Agency Energy regions. d. HQ USAF Directorate of Logistics, Logistics Readiness Division, Fuels Management Branch.

b. Defense Logistics Agency Energy.

57. (008) What heat related injuries may occur when you have muscle cramps in the abdominal wall or limbs? a. Heat exhaustion. b. Heat cramps. c. Heatstroke. d. Sunstroke.

b. Heat cramps.

1. (207) Which sampling device is used for sampling pressurized systems under flow conditions? a. Drum thief. b. In-line sampler. c. Bacon bomb sampler. d. Weighted bottle sampler

b. In-line sampler.

16. (004) Which technical order (TO) improvement recommendation requires a reply within 45 days? a. Urgent. b. Routine. c. Emergency. d. Critical hazard.

b. Routine.

(204) Which variances term refers to fuels gains and losses at Defense Fuel Support Points during routine operating conditions? a. Intransit. b. Storage. c. Transfer. d. Receipt

b. Storage.

(203) Which Fuels Manager window displays a dynamically updating image of the fuel tank contents? a. Real-time reports. b. Tank group. c. Tank detail. d. Graphics.

b. Tank group.

20. (006) What characteristic refers to how easy a liquid changes into a vapor state? a. Viscosity. b. Volatility. c. Boiling point. d. Vapor pressure.

b. Volatility.

56. (008) What is the proper treatment for someone who has been splashed with cryogenic liquid, such as liquid oxygen (LOX) or liquid nitrogen (LIN)? a. Rewarm the body part as soon as possible. b. Wrap the exposed area in a cotton blanket. c. Give the victim plenty of liquids. d. Watch closely and treat for shock

b. Wrap the exposed area in a cotton blanket.

. (207) The information that is carried over to the new Air Force Technical Order (AFTO) Form 422, Differential Pressure Log, when the old AFTO Form 422 is full, is the last.. a. two readings. b. four readings. c. two readings and the initials of the technician initiating the new form. d. four readings and the initials of the technician initiating the new form

b. four readings.

31. (008) Much time and expense are involved in investigating and a. solving accidents. b. reporting accidents. c. validating accidents. d. discovering accidents

b. reporting accidents.

47. (008) Fuels laboratories must have certain features, such as a. a deluge shower in the corner of the laboratory. b. windows made of reinforced wire safety glass. c. at least 210 square feet of working space. d. doors that are fireproof and open inward.

b. windows made of reinforced wire safety glass.

49. (008) Self-closing metal containers used for combustible waste disposal in fuels laboratories are identified by being painted a. red with yellow letters desi? a. red with yellow letters designating COMBUSTIBLE SOLID WASTE. b. yellow with red letters designating COMBUSTIBLE SOLID WASTE. c. red with yellow band and COMBUSTIBLE SOLID WASTE stenciled in 2-inch letters inside the band. d. yellow with red band and COMBUSTIBLE SOLID WASTE stenciled in 2-inch letters inside the band.

b. yellow with red letters designating COMBUSTIBLE SOLID WASTE.

43. (008) Normally, what minimum safe distance (in feet) should be maintained from the front and sides of jet engine intakes? a. 10. b. 15. c. 25. d. 50.

c. 25.

58. (009) What size torque wrench is recommended to have in the preventive maintenance tool kit? a. 3/4" drive (0-600 foot-pounds). b. 1/2" drive (0-600 foot-pounds). c. 3/4" drive (100-600 foot-pounds). d. 1/2" drive (100-600 foot-pounds).

c. 3/4" drive (100-600 foot-pounds).

33. (008) How many minutes must pass after filling a tank before inserting any object, even to determine the level of the fuel? a. 15. b. 20. c. 30. d. 35.

c. 30.

(209) Turbine engine oil is included in which recoverable and waste petroleum product category? a. 1—Fuels. b. 2—Oils. c. 4—Synthetic oils. d. 5—Mixed liquids

c. 4—Synthetic oils.

46. (008) Unlike most other fueling operations, cryogenic production does not stop when electrical storms are within a. 1 nautical mile. b. 3 nautical miles. c. 5 nautical miles. d. 7 nautical miles.

c. 5 nautical miles.

50. (008) At least how many feet from the fuels laboratory building must a 55-gallon waste drum be positioned? a. 10. b. 20. c. 50. d. 100.

c. 50

(210) The American Petroleum Institute (API) gravity test is most accurate when the fuel temperature is near a. 30 °F. b. 50 °F. c. 60 °F. d. 90 °F

c. 60 °F.

45. (008) What is the minimum capacity for aboveground storage tanks that would require a dike area? a. 661 barrels. b. 561 barrels. c. 661 gallons. d. 561 gallons.

c. 661 gallons.

(210) During a flashpoint analysis, apply heat to the sample so that the temperature increases at a rate of a. 7°F-9°F per minute. b. 8°F-10°F per minute. c. 9°F-11°F per minute. d. 10°F-12°F per minute

c. 9°F-11°F per minute.

Which specialized publications are primarily used to organize and simplify instructions. a. Time compliance technical orders. b. Technical manual supplements . c. Abbreviated technical orders. d. Commercial technical orders.

c. Abbreviated technical orders.

(207) Which sampling device has a projecting stem on a valve rod that opens automatically when the sampler strikes the bottom of a tank? a. Tube thief. b. Drum thief. c. Bacon bomb sampler. d. Weighted bottle sampler.

c. Bacon bomb sampler.

30. (007) Which is not a hazard of liquid nitrogen? a. Reduces the concentration of oxygen. b. Freezes or badly damages human tissue upon contact. c. Burns or explodes upon contact with oil, grease, and jet fuel. d. Builds up to tremendous pressure if it evaporates in a confined area.

c. Burns or explodes upon contact with oil, grease, and jet fuel.

13. (004) Which improvement recommendation should be submitted for a technical order (TO) deficiency that would result in a fatal or serious injury to personnel, or destruction of equipment? a. Urgent. b. Routine. c. Emergency. d. Time compliance.

c. Emergency.

(201) Along with the unit training manager, which fuels section coordinates upgrade training programs and requirements for fuels personnel? a. Fuels information service center. b. Fuels management team. c. Fuels training. d. Fuels mobility

c. Fuels training.

. (211) How often must electrical continuity tests be performed on lab filtration equipment? a. Daily. b. Weekly. c. Monthly. d. Semiannually

c. Monthly.

(205) What are the clipboard color-coding requirements for unleaded automotive gasoline vehicles? a. Red clipboard with blue stripes. b. Brown clipboard with green stripes. c. Red clipboard with green stripes. d. Brown clipboard with blue stripes.

c. Red clipboard with green stripes.

. (211) What type of dye is used for the Aeronautical Engine Laboratory (AEL) detector pad? a. Zinc chloride. b. Phthalic anhydride. c. Sodium fluorescein. d. Lysergic acid diethylamide

c. Sodium fluorescein.

(209) Disposal of tank bottom water should be coordinated with a. bioenvironmental services. b. fuel maintenance team. c. base environmental manager. d. fuels environmental safety office

c. base environmental manager.

(211) Prior to use, new sample containers for solids testing are rinsed with a. petroleum ether. b. isopropyl alcohol. c. filtered turbine fuel. d. demineralized water.

c. filtered turbine fuel.

19. (005) Publications that set up the standard of management and control the official business of the Air Force are called a. manuals. b. pamphlets. c. instructions. d. operating instructions.

c. instructions.

(203) The movement of fuel from one or more tanks to a ship, barge, truck, or a pipeline is called A a. receipt. b. transfer. c. shipment. d. return to bulk.

c. shipment.

51. (008) What is the minimum number of minutes that must pass to eliminate static charges before disassembling an in-line sampler? a. 4. b. 3. c. 2. d. 1.

d. 1.

42. (008) Operating aircraft can commonly produce noise levels in decibel ranges of? a. 40 to 90. b. 80 to 100. c. 90 to 110. d. 110 to 130.

d. 110 to 130.

24. (006) What temperature in degrees Fahrenheit (°F) is the minimum flash point of JP-5 jet fuel a. -20 F. b. -40 F. c. 100 F. d. 140 F.

d. 140 F.

37. (211) Before being used for a bottle method, test membrane filters are dried at a. 97 °C. b. 97 °F. c. 194 °C. d. 194 °F.

d. 194 °F.

44. (008) At a minimum, how many feet behind an aircraft's operating jet engine is considered safe? .a. 50. b. 100. c. 150. d. 200.

d. 200.

. (211) When obtaining a sample for the Aeronautical Engine Laboratory (AEL) water analysis method, how much fuel should pass through the test pad? a. One gallon. b. One quart. c. 600 milliliters. d. 300 milliliters.

d. 300 milliliters.

38. (008) Fuel servicing operations should not be conducted within how many feet of operating aircraft radar a. 100. b. 150. c. 200. d. 300.

d. 300.

14. (004) Within how many hours is the responsible technical content manager required to take action on a technical order (TO) emergency improvement recommendation report? a. 6. b. 12. c. 24. d. 48.

d. 48.

48. (008) What is the minimum fire rating for all interior walls separating the laboratory from other portions of the building? a. 15 minutes. b. 30 minutes. c. 45 minutes. d. 60 minutes.

d. 60 minutes.

29. (007) How many cubic feet of gaseous oxygen at atmospheric pressure will one cubic foot (7.5 gallons) of liquid oxygen (LOX) expand to? a. 500. ' b. 760. c. 800. d. 860.

d. 860.

12. (004) Which form would you most likely use to report technical order (TO) deficiencies? a. AF Form 457, USAF Hazard Report. b. AFTO Form 422, Differential Pressure Log. c. AF Form 847, Recommendation for Change of Publication. d. AFTO Form 22, Technical Manual (TM) Change Recommendation and Reply.

d. AFTO Form 22, Technical Manual (TM) Change Recommendation and Reply.

21. (006) Which term is used to describe the temperature at which a liquid actively starts to vaporize? a. Volatility. b. Fire point. c. Flash point. d. Boiling point.

d. Boiling point.

(204) Product loss caused by a hostile activity in a deployed location is categorized as what type of determinable variance? a. Peacetime loss. b. Major disaster. c. Wartime loss. d. Combat loss.

d. Combat loss.

22. (006) What term is used to describe the ability of a substance to support combustion? a. Volatility. b. Fire point. c. Flash point. d. Flammability.

d. Flammability.

(208) During a visual sample what kind of dye is used to aid in distinguishing water from fuel? a. Acid dye. b. Fluorescent. c. Reactive dye. d. Food coloring.

d. Food coloring.

(202) Who is responsible for establishing and updating Air Force policy for managing petroleum resources? a. Air Force Petroleum Office. b. Defense Logistics Agency Energy . c. Defense Logistics Agency Energy regions. d. HQ USAF Directorate of Logistics, Logistics Readiness Division, Fuels Management Branch

d. HQ USAF Directorate of Logistics, Logistics Readiness Division, Fuels Management Branch

(201) Who appoints a primary and alternate fuels responsible officer to oversee the care and safeguarding of petroleum stocks and accountable records? a. Fuels management team. b. Fuels information service center. c. Defense logistics agency energy. d. Logistics readiness squadron commander

d. Logistics readiness squadron commander

53. (008) What should you do first when fighting an electrical fire? a. Aim the fire extinguisher at the base of the fire. b. Contact the base interior electric shop. c. Locate a water-type fire extinguisher. d. Remove the power source.

d. Remove the power source.

(211) Printed standards for the Aeronautical Engine Laboratory (AEL) test should be replaced a. monthly. b. quarterly. c. semiannually. d. annually

d. annually

(210) When performing a flashpoint analysis, ensure the sample and the test cup temperature is a. at room temperature. b. between 60°F and 75°F. c. between 60°C and 75°C. d. at least 32°F below the expected flashpoint

d. at least 32°F below the expected flashpoint

(211) The Gammon Aqua Glo water detector should be calibrated a. weekly. b. monthly. c. semiannually. d. daily prior to the first use

d. daily prior to the first use

(210) The correct place to take the reading for the American Petroleum Institute (API) gravity test is at the a. top of the hydrometer. b. bottom of the cylinder. c. point at which the principal surface of the liquid cuts the thermometer scale. d. point at which the principal surface of the liquid cuts the hydrometer scale

d. point at which the principal surface of the liquid cuts the hydrometer scale

18. (005) An example of a directive standard publication is a a. bulletin. b. pamphlet. c. staff digest. d. supplement.

d. supplement.

55. (008) The best way to reduce the dangers of asphyxiation when performing work in areas suspected of fuel vapors is to use? a. safety precautions at all times. b. only qualified technicians. c. safe working time limits. d. the two-person concept.

d. the two-person concept.