IET 154 NX Questions

¡Supera tus tareas y exámenes ahora con Quizwiz!

The _____ rollout in the shell dialog box is used to specify the faces of a model that should not be displayed in the resultant model.

Face to pierce

After creating a coordinate system, you cannot modify its location. (T/F)

False

In NX, you can create only realistic threads. (T/F)

False

In NX, you can extrude a sketch to perform only the Unite operation.

False

In NX, you cannot draw a rectangle from its center. (T/F)

False

In mechanical designs, all features are created on a single plane. (T/F)

False

The Fit constraint is used to bring together two cylindrical faces of different diameters (T/F).

False

Most of the designs created in NX consist of sketch-based features and placed features. (T/F)

True

NX allows you to make the projected sketched entities associative with the original entities. (T/F)

True

The Drafting Preferences dialog box is used to set the dimension parameters (T/F).

True

The Finish Sketch tool in the Home tab is used to exit the Sketch Environment. (T/F)

True

The Quick Trim tool is used to remove a portion of the sketch by chopping it off. (T/F)

True

The Rapid Dimension tool in the Direct Sketch group is used to add all possible dimension types. (T/F)

True

The Sketch tool in the Home tab is chosen to switch to the Sketch in Task environment. (T/F)

True

The files in NX are saved with .prt extension. (T/F)

True

While creating counterbore holes, the counterbore diameter must be greater than the hole diameter. (T/F)

True

You can chamfer circular edges. (T/F)

True

You can rotate a model in 3D space by using the Rotate tool. (T/F)

True

You can select entities by dragging a box around them. (T/F)

True

You can set the selection mode to select only the sketched entities. (T/F)

True

You can set the transparency of a component in the assembly application for simplifying the assembly (T/F).

True

You can turn off the display of additional datum planes. (T/F)

True

You can use the dynamic input boxes to specify the exact values of the sketched entities. (T/F)

True

You can use the linear option from the Pattern Feature dialog box to create a linear pattern of features. (T/F)

True

You need to choose the Sketch in Task environment tool to invoke the Sketch environment. (T/F)

True

The _____ option is used to create a revolved feature that terminates at a specified face.

Until selected

In which of the following groups can you set the display modes for solid models?

View

You can restore standard views by using buttons from the _____ group in the Top Border Bar.

View

Hole features can be placed on surfaces (sheet bodies). (T/F)

True

If you enter 0 in the Inner Diameter edit box, the resulting tube feature will be solid filled. (T/F)

True

You can exit the Sketch environment by choosing the ______ tool from the Direct Sketch group.

finish sketch

The _______ constraint is used to fix a selected entity in terms of its position with respect to the coordinate system of the current sketch.

fixed

Slots are used as a _____ for sliding a member in practical models.

guide way

Slots are _____ features.

placed

Fixed datum planes are also termed as _____ datum planes.

principle

In the Shell dialog box, which of the following rollouts is used to select a face of a model to specify different wall thickness?

Alternate thickness

The ______ option is used to create a plane at an angle to another plane passing through an edge, linear sketched segment, or axis.

At angle

Which of the following tools is used to create the automatic exploded view of the components?

Auto-explode components

Which of the following tools is used to make the endpoints of selected objects coincident?

Coincident

Which mode is automatically invoked from the Profile dialog box when you specify the start point of a line?

Coordinate Mode

Which of the following rollouts in the Edge Blend dialog box is used to create a corner blend feature?

Corner setback

Which of the following tools is used to apply the constant length constraint between sketch members?

Equal length

A counterbore hole has a uniform diameter throughout its length. (T/F)

False

A detail view can be generated directly from a model (T/F).

False

If you create an associative datum plane, its name will be displayed as Fixed Datum Plane in the Part Navigator. (T/F)

False

One assembly can only have one exploded view (T/F).

False

When you mirror various entities using the Mirror Curve tool, by default, a mirrored copy of the selected entities is created and the original entities are deleted. (T/F)

False

When you start a new part file, the fixed datum planes are provided by default. (T/F)

False

You cannot edit the assembly constraints (T/F).

False

Which of the following tools is used to automatically retrieve the dimensions created in a model in the drawing view?

Feature parameters

Which of the following tools is used to insert an image into a drawing sheet?

Image

Which of the following options is used to align the central axis of two cylindrical components?

Infer center/axis

The ______ boolean operation is used to create an extruded feature by retaining the material common to the existing feature and the sketch.

Intersect

Which of the following tools is used to invoke the Mirror Assemblies Wizard dialog box?

Mirror Assembly

Which of the following tools in NX allows you to dynamically move, rotate, or copy the solid objects and sketched entities?

Move object

Which of the following tools is used for replacing a component in an assembly?

Replace component

Which of the following threads allows the screw to get tightened when rotated in the clockwise direction?

Right hand

Which one of the following is not a hole type in NX?

Sectional

Which of the following tools is used for performing an interference check on an assembly?

Simple Clearance Check

The _____ check box is selected to create a fill pattern.

Simplified boundary fill

Which of the following projection output types project external elements as a single continuous spline?

Single spline

The _____ option is used to extrude the sketch symmetrically on both sides of the plane on which the sketch is created.

Symmetric value

Which of the following options is available in the Studio Spline dialog box along with the By Poles option to draw splines?

Through points

Which of the following options is used to make the two faces of a component coplanar?

Touch align

Assembly constraints have no relation with the exploded views (T/F).

True

Before creating part balloons, it is mandatory to create the Parts List of the assembly (T/F).

True

By default, the Resource Bar is located on the left side of the NX window. (T/F)

True

If you choose the Finish Sketch tool from the Direct Sketch group to exit the sketching environment, the Modeling environment will be invoked. (T/F)

True

If you clear the Associative check box in the settings rollout of the Assembly Constraint dialog box and choose the OK button, the constraint will not be applied (T/F).

True

In the Results rollout of the Move Object dialog box, you can specify whether you want to move the original entity or its copy by using the Move Original or Copy Original radio button. (T/F)

True

Part balloons can be modified dynamically (T/F).

True

The Stop Short of Corner rollout of the Edge Blend dialog box is used to restrict the distance of the blend in the selected edge. (T/F)

True

The Until Selected option is used to extrude a sketch up to a specified face, a datum plane, or a body. (T/F)

True

The generative drafting technique is used to automatically generate the drawing views of parts and assemblies. (T/F)

True

While creating parallel planes, you can select only a planar surface or a surface as a reference object. (T/F)

True

You can apply the touch align constraint to constrain the components tangentially (T/F).

True

You can invoke the Hole tool by choosing Menu>Insert>Design Feature>Hole from the Top Border Bar. (T/F)

True

You can modify an existing design quickly using the Synchronous Modeling tools. (T/F)

True

You can modify the dimensions of a component in the Assembly environment (T/F).

True

You can set display modes for solid models using buttons in the View group in the Top Border Bar.

True

The ______ option is used to extrude the sketch up to a specified face which does not intersect the sketch in its current shape and size.

Until extended

Which of the following options allows you to extrude a sketch from the sketching plane to the next surface that intersects a feature in the specified direction?

Until next

Slot features cannot be placed on a ____ face.

conical

The ______ tool is used to show all the constraints applied to a sketch.

display sketch constraints

The ______ keeps a track of all of the operations that are carried out on the part.

part navigator

In NX, how many methods are used to start a new file?

2

In NX, you can create _____ types of grooves.

3

Which of the following tools is used to apply an angular dimension to a sketch member?

Angular

The _____ pattern is created by placing the instances of the selected features along the circumference of an imaginary circle.

Circular

Which of the following tools is used to create a chamfer feature?

Chamfer

The ______ constraint is used to force two curves to share the same center point.

Concentric

Which of the following tools in NX is used to create conics?

Conic

Which of the following tools is used to convert a sketch member into a reference element?

Convert to/from reference

Which of the following tools allows you to create additional datum planes?

Datum plane

Which of the following tools is used to create a blend (fillet) feature?

Edge blend

Which of the following groups contains the tools for creating the exploded views?

Exploded views

The Quick Extend tool is used to extend or lengthen an open sketched entity up to infinity. (T/F)

False

The Replace Component tool is used to replace the component that is already placed in an assembly with the new component (T/F).

False

The Shell dialog box allows you to hollow models by using three methods. (T/F)

False

The Thread dialog box does not allow you to select the start and the end of threads. (T/F)

False

The Tube tool is used to create a tube of rectangular cross-section. (T/F)

False

When you invoke the Sketch environment from the Direct Sketch group, the Profile tool is invoked by default. (T/F)

False

The ______ option is used to add the draft that is aligned with the profile.

From section

Which of the following check boxes in the Thread dialog box is selected to create threads through the length of a selected face?

Full thread

Which of the following tools is used to apply geometric constraints to a sketch?

Geometric constraints

After invoking the Quick Trim tool, you can drag the cursor to trim ______ entities.

Multiple

Which of the following dialog boxes is displayed when you choose the New button from the File tab to start a new file?

New

Which of the following rollouts is used to create a thin extruded feature by offsetting the sketch in two directions?

Offset

You can create thin features using the _____ or _____ sketches.

Open, close

Which of the following options in the Insert menu allows you to project existing entities on the current sketching plane?

Project curve

The ______ tool is used to dimension the radius of an arc.

Radial

Which of the following tools is used to add a radial dimension to a sketch?

Radial

NX uses the ______ rule to determine the direction of revolution.

Right-hand thumb

Which of the following rules is used to determine the direction of revolution?

Right-hand thumb rule

The _____ tool is used to scoop out material from a model and make it hollow from inside.

Shell

The ______ boolean operation is used to create an extruded feature by removing material from an existing feature.

Subtract

The _____ features are created by sweeping one or more section along one or more guide curves such that all sections are blended together.

Swept

Which of the following types of threads displays thread convention in the form of dashed lines?

Symbolic

Which of the following tools is used to create a title block in a drawing sheet?

Tabular note

Which of the following views is the default view in NX?

Trimetric

After generating different drawing views, you can align them using the View Alignment tool (T/F).

True

After invoking the drafting environment, you can change the sheet specifications (T/F).

True

In NX, the Radial Dimension tool is used to add the diameter dimension to the sketch members. (T/F)

True

In NX, the degree of freedom arrows are displayed on the points that are free to move. (T/F)

True

In NX, while extruding a sketch, you can add a draft to it. (T/F)

True

In NX, you can add all types of geometric constraints by choosing the Geometric Constraints tool from the Direct Sketch group of the Home tab. (T/F)

True

In NX, you can create a number of holes at a time using the Hole tool. (T/F)

True

In NX, you can create an aligned series of holes in multiple bodies. (T/F)

True

In NX, you can create fillets by simply dragging the cursor across the entities that you want to fillet. (T/F)

True

In NX, you can sweep an open section along a guide curve. (T/F)

True

In T-slots, the bottom width value must be greater than the top width value. (T/F)

True

The Angle constraint is used to specify an angle between two selected reference objects of the components (T/F).

True

The Auto Constrain tool allows you to apply all possible geometric constraints automatically to an entire sketch. (T/F)

True

The Bond constraint is used to fix the position of the selected components with respect to each other (T/F).

True

The Check Clearance tool is used to check the interference between the components in the assembly (T/F).

True

The Delete Explosion tool is used to delete an exploded view (T/F).

True

The Direct Sketch group contains all tools required to draw a sketch. (T/F)

True

The modeling environment of NX is a parametric and feature-based environment. (T/F)

True

The placement face selected for holes cannot be a nonuniform surface. (T/F)

True

Which of the following tools does not need a section to create a feature?

Tube

Which of the following operations allows you to join a new feature within an existing feature?

Unite

Which of the following rollouts in the Edge Blend dialog box is used to create the variable radii blend feature?

Variable radius points

The _____ method is used to pattern features with details such as rounds and chamfers.

Variational

Which of the following options is used to create a pattern of features with details such as rounds and chamfers?

Variational

You can fillet corners in a sketch by using the ______ tool.

fillet

The ______ tool is used to animate a fully constrained sketch.

animate dimension

The _______ group is used to generate the GDT parameters, annotations, and symbols.

annotation

You can invoke the arc mode within the Profile tool by choosing the _______ button from the Profile dialog box.

arc

The _______ that exists between the environments of NX ensures that any modification made in the model in one environment is automatically reflected in other environments immediately.

bidirectional associativity

Grooves can be created on both ___ and ___ faces.

cylindrical, conical

The _____ radio button is selected from the Thread dialog box to create realistic threads.

detailed

You can draw an elliptical arc by using the ______ tool.

ellipse

If you choose the _______ button from the Rectangle dialog box, it will enable you to draw a centerpoint rectangle.

from center

The ______ tool is used to measure the distance between two objects.

measure distance

Which of the following paths is used to invoke the Move Object tool?

menu>edit

You can restore the original orientation of the sketching plane by using the _______ tool.

orient view to sketch

The _______ is a file extension associated with all the files that are created in different environments of NX.

prt

You can invoke the _______ tool by pressing and holding the middle mouse button.

rotate

The ______ option in the Measure Distance dialog box is used to measure the distance between the objects with respect to a view point.

screen distance

Which of the following options should be selected from the Model View to Use drop-down list in the model view area for generating an exploded drawing view?

trimetric


Conjuntos de estudio relacionados

CHAP 10 SOCI- Racial & Ethnic Minorities

View Set

JLH ATI: Client Education Posttest

View Set

Viruses that can cause cancer in Humans

View Set