IET 154 NX Questions
The _____ rollout in the shell dialog box is used to specify the faces of a model that should not be displayed in the resultant model.
Face to pierce
After creating a coordinate system, you cannot modify its location. (T/F)
False
In NX, you can create only realistic threads. (T/F)
False
In NX, you can extrude a sketch to perform only the Unite operation.
False
In NX, you cannot draw a rectangle from its center. (T/F)
False
In mechanical designs, all features are created on a single plane. (T/F)
False
The Fit constraint is used to bring together two cylindrical faces of different diameters (T/F).
False
Most of the designs created in NX consist of sketch-based features and placed features. (T/F)
True
NX allows you to make the projected sketched entities associative with the original entities. (T/F)
True
The Drafting Preferences dialog box is used to set the dimension parameters (T/F).
True
The Finish Sketch tool in the Home tab is used to exit the Sketch Environment. (T/F)
True
The Quick Trim tool is used to remove a portion of the sketch by chopping it off. (T/F)
True
The Rapid Dimension tool in the Direct Sketch group is used to add all possible dimension types. (T/F)
True
The Sketch tool in the Home tab is chosen to switch to the Sketch in Task environment. (T/F)
True
The files in NX are saved with .prt extension. (T/F)
True
While creating counterbore holes, the counterbore diameter must be greater than the hole diameter. (T/F)
True
You can chamfer circular edges. (T/F)
True
You can rotate a model in 3D space by using the Rotate tool. (T/F)
True
You can select entities by dragging a box around them. (T/F)
True
You can set the selection mode to select only the sketched entities. (T/F)
True
You can set the transparency of a component in the assembly application for simplifying the assembly (T/F).
True
You can turn off the display of additional datum planes. (T/F)
True
You can use the dynamic input boxes to specify the exact values of the sketched entities. (T/F)
True
You can use the linear option from the Pattern Feature dialog box to create a linear pattern of features. (T/F)
True
You need to choose the Sketch in Task environment tool to invoke the Sketch environment. (T/F)
True
The _____ option is used to create a revolved feature that terminates at a specified face.
Until selected
In which of the following groups can you set the display modes for solid models?
View
You can restore standard views by using buttons from the _____ group in the Top Border Bar.
View
Hole features can be placed on surfaces (sheet bodies). (T/F)
True
If you enter 0 in the Inner Diameter edit box, the resulting tube feature will be solid filled. (T/F)
True
You can exit the Sketch environment by choosing the ______ tool from the Direct Sketch group.
finish sketch
The _______ constraint is used to fix a selected entity in terms of its position with respect to the coordinate system of the current sketch.
fixed
Slots are used as a _____ for sliding a member in practical models.
guide way
Slots are _____ features.
placed
Fixed datum planes are also termed as _____ datum planes.
principle
In the Shell dialog box, which of the following rollouts is used to select a face of a model to specify different wall thickness?
Alternate thickness
The ______ option is used to create a plane at an angle to another plane passing through an edge, linear sketched segment, or axis.
At angle
Which of the following tools is used to create the automatic exploded view of the components?
Auto-explode components
Which of the following tools is used to make the endpoints of selected objects coincident?
Coincident
Which mode is automatically invoked from the Profile dialog box when you specify the start point of a line?
Coordinate Mode
Which of the following rollouts in the Edge Blend dialog box is used to create a corner blend feature?
Corner setback
Which of the following tools is used to apply the constant length constraint between sketch members?
Equal length
A counterbore hole has a uniform diameter throughout its length. (T/F)
False
A detail view can be generated directly from a model (T/F).
False
If you create an associative datum plane, its name will be displayed as Fixed Datum Plane in the Part Navigator. (T/F)
False
One assembly can only have one exploded view (T/F).
False
When you mirror various entities using the Mirror Curve tool, by default, a mirrored copy of the selected entities is created and the original entities are deleted. (T/F)
False
When you start a new part file, the fixed datum planes are provided by default. (T/F)
False
You cannot edit the assembly constraints (T/F).
False
Which of the following tools is used to automatically retrieve the dimensions created in a model in the drawing view?
Feature parameters
Which of the following tools is used to insert an image into a drawing sheet?
Image
Which of the following options is used to align the central axis of two cylindrical components?
Infer center/axis
The ______ boolean operation is used to create an extruded feature by retaining the material common to the existing feature and the sketch.
Intersect
Which of the following tools is used to invoke the Mirror Assemblies Wizard dialog box?
Mirror Assembly
Which of the following tools in NX allows you to dynamically move, rotate, or copy the solid objects and sketched entities?
Move object
Which of the following tools is used for replacing a component in an assembly?
Replace component
Which of the following threads allows the screw to get tightened when rotated in the clockwise direction?
Right hand
Which one of the following is not a hole type in NX?
Sectional
Which of the following tools is used for performing an interference check on an assembly?
Simple Clearance Check
The _____ check box is selected to create a fill pattern.
Simplified boundary fill
Which of the following projection output types project external elements as a single continuous spline?
Single spline
The _____ option is used to extrude the sketch symmetrically on both sides of the plane on which the sketch is created.
Symmetric value
Which of the following options is available in the Studio Spline dialog box along with the By Poles option to draw splines?
Through points
Which of the following options is used to make the two faces of a component coplanar?
Touch align
Assembly constraints have no relation with the exploded views (T/F).
True
Before creating part balloons, it is mandatory to create the Parts List of the assembly (T/F).
True
By default, the Resource Bar is located on the left side of the NX window. (T/F)
True
If you choose the Finish Sketch tool from the Direct Sketch group to exit the sketching environment, the Modeling environment will be invoked. (T/F)
True
If you clear the Associative check box in the settings rollout of the Assembly Constraint dialog box and choose the OK button, the constraint will not be applied (T/F).
True
In the Results rollout of the Move Object dialog box, you can specify whether you want to move the original entity or its copy by using the Move Original or Copy Original radio button. (T/F)
True
Part balloons can be modified dynamically (T/F).
True
The Stop Short of Corner rollout of the Edge Blend dialog box is used to restrict the distance of the blend in the selected edge. (T/F)
True
The Until Selected option is used to extrude a sketch up to a specified face, a datum plane, or a body. (T/F)
True
The generative drafting technique is used to automatically generate the drawing views of parts and assemblies. (T/F)
True
While creating parallel planes, you can select only a planar surface or a surface as a reference object. (T/F)
True
You can apply the touch align constraint to constrain the components tangentially (T/F).
True
You can invoke the Hole tool by choosing Menu>Insert>Design Feature>Hole from the Top Border Bar. (T/F)
True
You can modify an existing design quickly using the Synchronous Modeling tools. (T/F)
True
You can modify the dimensions of a component in the Assembly environment (T/F).
True
You can set display modes for solid models using buttons in the View group in the Top Border Bar.
True
The ______ option is used to extrude the sketch up to a specified face which does not intersect the sketch in its current shape and size.
Until extended
Which of the following options allows you to extrude a sketch from the sketching plane to the next surface that intersects a feature in the specified direction?
Until next
Slot features cannot be placed on a ____ face.
conical
The ______ tool is used to show all the constraints applied to a sketch.
display sketch constraints
The ______ keeps a track of all of the operations that are carried out on the part.
part navigator
In NX, how many methods are used to start a new file?
2
In NX, you can create _____ types of grooves.
3
Which of the following tools is used to apply an angular dimension to a sketch member?
Angular
The _____ pattern is created by placing the instances of the selected features along the circumference of an imaginary circle.
Circular
Which of the following tools is used to create a chamfer feature?
Chamfer
The ______ constraint is used to force two curves to share the same center point.
Concentric
Which of the following tools in NX is used to create conics?
Conic
Which of the following tools is used to convert a sketch member into a reference element?
Convert to/from reference
Which of the following tools allows you to create additional datum planes?
Datum plane
Which of the following tools is used to create a blend (fillet) feature?
Edge blend
Which of the following groups contains the tools for creating the exploded views?
Exploded views
The Quick Extend tool is used to extend or lengthen an open sketched entity up to infinity. (T/F)
False
The Replace Component tool is used to replace the component that is already placed in an assembly with the new component (T/F).
False
The Shell dialog box allows you to hollow models by using three methods. (T/F)
False
The Thread dialog box does not allow you to select the start and the end of threads. (T/F)
False
The Tube tool is used to create a tube of rectangular cross-section. (T/F)
False
When you invoke the Sketch environment from the Direct Sketch group, the Profile tool is invoked by default. (T/F)
False
The ______ option is used to add the draft that is aligned with the profile.
From section
Which of the following check boxes in the Thread dialog box is selected to create threads through the length of a selected face?
Full thread
Which of the following tools is used to apply geometric constraints to a sketch?
Geometric constraints
After invoking the Quick Trim tool, you can drag the cursor to trim ______ entities.
Multiple
Which of the following dialog boxes is displayed when you choose the New button from the File tab to start a new file?
New
Which of the following rollouts is used to create a thin extruded feature by offsetting the sketch in two directions?
Offset
You can create thin features using the _____ or _____ sketches.
Open, close
Which of the following options in the Insert menu allows you to project existing entities on the current sketching plane?
Project curve
The ______ tool is used to dimension the radius of an arc.
Radial
Which of the following tools is used to add a radial dimension to a sketch?
Radial
NX uses the ______ rule to determine the direction of revolution.
Right-hand thumb
Which of the following rules is used to determine the direction of revolution?
Right-hand thumb rule
The _____ tool is used to scoop out material from a model and make it hollow from inside.
Shell
The ______ boolean operation is used to create an extruded feature by removing material from an existing feature.
Subtract
The _____ features are created by sweeping one or more section along one or more guide curves such that all sections are blended together.
Swept
Which of the following types of threads displays thread convention in the form of dashed lines?
Symbolic
Which of the following tools is used to create a title block in a drawing sheet?
Tabular note
Which of the following views is the default view in NX?
Trimetric
After generating different drawing views, you can align them using the View Alignment tool (T/F).
True
After invoking the drafting environment, you can change the sheet specifications (T/F).
True
In NX, the Radial Dimension tool is used to add the diameter dimension to the sketch members. (T/F)
True
In NX, the degree of freedom arrows are displayed on the points that are free to move. (T/F)
True
In NX, while extruding a sketch, you can add a draft to it. (T/F)
True
In NX, you can add all types of geometric constraints by choosing the Geometric Constraints tool from the Direct Sketch group of the Home tab. (T/F)
True
In NX, you can create a number of holes at a time using the Hole tool. (T/F)
True
In NX, you can create an aligned series of holes in multiple bodies. (T/F)
True
In NX, you can create fillets by simply dragging the cursor across the entities that you want to fillet. (T/F)
True
In NX, you can sweep an open section along a guide curve. (T/F)
True
In T-slots, the bottom width value must be greater than the top width value. (T/F)
True
The Angle constraint is used to specify an angle between two selected reference objects of the components (T/F).
True
The Auto Constrain tool allows you to apply all possible geometric constraints automatically to an entire sketch. (T/F)
True
The Bond constraint is used to fix the position of the selected components with respect to each other (T/F).
True
The Check Clearance tool is used to check the interference between the components in the assembly (T/F).
True
The Delete Explosion tool is used to delete an exploded view (T/F).
True
The Direct Sketch group contains all tools required to draw a sketch. (T/F)
True
The modeling environment of NX is a parametric and feature-based environment. (T/F)
True
The placement face selected for holes cannot be a nonuniform surface. (T/F)
True
Which of the following tools does not need a section to create a feature?
Tube
Which of the following operations allows you to join a new feature within an existing feature?
Unite
Which of the following rollouts in the Edge Blend dialog box is used to create the variable radii blend feature?
Variable radius points
The _____ method is used to pattern features with details such as rounds and chamfers.
Variational
Which of the following options is used to create a pattern of features with details such as rounds and chamfers?
Variational
You can fillet corners in a sketch by using the ______ tool.
fillet
The ______ tool is used to animate a fully constrained sketch.
animate dimension
The _______ group is used to generate the GDT parameters, annotations, and symbols.
annotation
You can invoke the arc mode within the Profile tool by choosing the _______ button from the Profile dialog box.
arc
The _______ that exists between the environments of NX ensures that any modification made in the model in one environment is automatically reflected in other environments immediately.
bidirectional associativity
Grooves can be created on both ___ and ___ faces.
cylindrical, conical
The _____ radio button is selected from the Thread dialog box to create realistic threads.
detailed
You can draw an elliptical arc by using the ______ tool.
ellipse
If you choose the _______ button from the Rectangle dialog box, it will enable you to draw a centerpoint rectangle.
from center
The ______ tool is used to measure the distance between two objects.
measure distance
Which of the following paths is used to invoke the Move Object tool?
menu>edit
You can restore the original orientation of the sketching plane by using the _______ tool.
orient view to sketch
The _______ is a file extension associated with all the files that are created in different environments of NX.
prt
You can invoke the _______ tool by pressing and holding the middle mouse button.
rotate
The ______ option in the Measure Distance dialog box is used to measure the distance between the objects with respect to a view point.
screen distance
Which of the following options should be selected from the Model View to Use drop-down list in the model view area for generating an exploded drawing view?
trimetric