Intro to Network Final

Match each description with an appropriate IP address. (Not all options are used.) -a link-local address -a public address -an experimental address -a loopback address

-a link-local address 169.254.1.5 -a public address 198.133.219.2 -an experimental address 240.2.6.255 -a loopback address 127.0.0.1

Which two commands can be used on a Windows host to display the routing table? (Choose two.) route print show ip route netstat -r netstat -s

route print netstat -r

What are three characteristics of the CSMA/CD process? (Choose three.) After detecting a collision, hosts can attempt to resume transmission after a random time delay has expired. A jam signal indicates that the collision has cleared and the media is not busy. All of the devices on a segment see data that passes on the network medium. The device with the electronic token is the only one that can transmit after a collision. Devices can be configured with a higher transmission priority. A device listens and waits until the media is not busy before transmitting

1. After detecting a collision, hosts can attempt to resume transmission after a random time delay has expired. 2. All of the devices on a segment see data that passes on the network medium. 3. A device listens and waits until the media is not busy before transmitting.

Data is being sent from a source PC to a destination server. Which three statements correctly describe the function of TCP or UDP in this situation? (Choose three.) TCP is the preferred protocol when a function requires lower network overhead. The source port field identifies the running application or service that will handle data returning to the PC. The TCP source port number identifies the sending host on the network. UDP segments are encapsulated within IP packets for transport across the network. The UDP destination port number identifies the application or service on the server which will handle the data. The TCP process running on the PC randomly selects the destination port when establishing a session with the server.

1. The source port field identifies the running application or service that will handle data returning to the PC. 2. UDP segments are encapsulated within IP packets for transport across the network. 3. The UDP destination port number identifies the application or service on the server which will handle the data.

Refer to the exhibit. Which two network addresses can be assigned to the network containing 10 hosts? Your answers should waste the fewest addresses, not reuse addresses that are already assigned, and stay within the 10.18.10.0/24 range of addresses. (Choose two.) 10.18.10.224/27 10.18.10.208/28 10.18.10.200/27 10.18.10.200/28 10.18.10.224/28

10.18.10.208/28 10.18.10.224/28 Addresses 10.18.10.0 through 10.18.10.63 are taken for the leftmost network. Addresses 192 through 199 are used by the center network. Because 4 host bits are needed to accommodate 10 hosts, a /28 mask is needed. 10.18.10.200/28 is not a valid network number. Two subnets that can be used are 10.18.10.208/28 and 10.18.10.224/28.

Which subnet would include the address 192.168.1.96 as a usable host address? 192.168.1.32/27 192.168.1.32/28 192.168.1.64/29 192.168.1.64/26

192.168.1.64/26

What would be the interface ID of an IPv6 enabled interface with a MAC address of 1C-6F-65-C2-BD-F8 when the interface ID is generated by using the EUI-64 process? 1E6F:65FF:FEC2:BDF8 C16F:65FF:FEC2:BDF8 0C6F:65FF:FEC2:BDF8 106F:65FF:FEC2:BDF8

1E6F:65FF:FEC2:BDF8

Refer to the exhibit. A network engineer has been given the network address of 192.168.99.0 and a subnet mask of 255.255.255.192 to subnet across the four networks shown. How many total host addresses are unused across all four subnets? 158 200 224 88 72

200 The network IP address 192.168.99.0 and a subnet mask of 255.255.255.192 provides 62 usable IP addresses for each subnet. Subnet A needs 30 host addresses. There are 32 addresses wasted. Subnet B uses 2 of the 62 available IP addresses, because it is a serial link. Consequently, it wastes 60 addresses. Likewise, subnet C wastes 60 addresses. Subnet D needs 14 addresses, so it wastes 48 addresses. The total wasted addresses are 32+60+60+48=200 addresses.

What is the subnet ID associated with the IPv6 address 2001:DA48:FC5:A4:3D1B::1/64? 2001:DA48::/64​ 2001::/64 2001:DA48:FC5:A4::/64​ 2001:DA48:FC5::A4:/64

2001:DA48:FC5:A4::/64​ The /64 represents the network and subnet IPv6 fields. The fourth field of hexadecimal digits is referred to as the subnet ID.

A network administrator is adding a new LAN to a branch office. The new LAN must support 200 connected devices. What is the smallest network mask that the network administrator can use for the new network? 255.255.255.224 255.255.255.240 255.255.255.192 255.255.255.0

255.255.255.0

Refer to the exhibit. A company uses the address block of 128.107.0.0/16 for its network. What subnet mask would provide the maximum number of equal size subnets while providing enough host addresses for each subnet in the exhibit? 255.255.255.128 255.255.255.224 255.255.255.192 255.255.255.0 255.255.255.240

255.255.255.128

What subnet mask is needed if an IPv4 network has 40 devices that need IP addresses and address space is not to be wasted? 255.255.255.224 255.255.255.128 255.255.255.240 255.255.255.192 255.255.255.0

255.255.255.192

Refer to the exhibit. If host A sends an IP packet to host B, what will the destination address be in the frame when it leaves host A? 172.168.10.65 172.168.10.99 AA:AA:AA:AA:AA:AA CC:CC:CC:CC:CC:CC BB:BB:BB:BB:BB:BB DD:DD:DD:DD:DD:DD

BB:BB:BB:BB:BB:BB

What method is used to manage contention-based access on a wireless network? CSMA/CD priority ordering CSMA/CA token passing

CSMA/CA

An administrator defined a local user account with a secret password on router R1 for use with SSH. Which three additional steps are required to configure R1 to accept only encrypted SSH connections? (Choose three.) Configure the IP domain name on the router. Enable inbound vty Telnet sessions . Configure DNS on the router. Generate the SSH keys. Generate two-way pre-shared keys. Enable inbound vty SSH sessions.

Configure the IP domain name on the router. Generate the SSH keys. Enable inbound vty SSH sessions.

Which range of link-local addresses can be assigned to an IPv6-enabled interface?​ FE80::/10 FDEE::/7​ FF00::/8​ FEC0::/10

FE80::/10

A network technician is researching the use of fiber optic cabling in a new technology center. Which two issues should be considered before implementing fiber optic media? (Choose two.) Fiber optic cabling requires different termination and splicing expertise from what copper cabling requires Fiber optic cabling requires specific grounding to be immune to EMI. Fiber optic cabling is susceptible to loss of signal due to RFI. Fiber optic provides higher data capacity but is more expensive than copper cabling. Fiber optic cable is able to withstand rough handling.

Fiber optic cabling requires different termination and splicing expertise from what copper cabling requires. Fiber optic provides higher data capacity but is more expensive than copper cabling.

What attribute of a NIC would place it at the data link layer of the OSI model? attached Ethernet cable TCP/IP protocol stack IP address RJ-45 port MAC address

MAC address

Refer to the exhibit. PC1 issues an ARP request because it needs to send a packet to PC2. In this scenario, what will happen next?​ RT1 will send an ARP reply with its Fa0/0 MAC address.​ SW1 will send an ARP reply with the PC2 MAC address.​ RT1 will send an ARP reply with the PC2 MAC address. ​ SW1 will send an ARP reply with its Fa0/1 MAC address.​ PC2 will send an ARP reply with its MAC address.

PC2 will send an ARP reply with its MAC address.

Which two protocols operate at the top layer of the TCP/IP protocol suite? (Choose two.) POP DNS IP TCP Ethernet UDP

POP DNS

What service is provided by POP3? Uses encryption to provide secure remote access to network devices and servers. Retrieves email from the server by downloading the email to the local mail application of the client. Allows remote access to network devices and servers. An application that allows real-time chatting among remote users.

Retrieves email from the server by downloading the email to the local mail application of the client.

What are two ICMPv6 messages that are not present in ICMP for IPv4? (Choose two.) Router Advertisement Destination Unreachable Neighbor Solicitation Route Redirection Host Confirmation Time Exceeded

Router Advertisement Neighbor Solicitation

Match the application protocols to the correct Transport protocol DHCP FTP HTTP SMTP TFTP

TCP -FTP -HTTP -SMTP UDP -DHCP -TFTP

A technician with a PC is using multiple applications while connected to the Internet. How is the PC able to keep track of the data flow between multiple application sessions and have each application receive the correct packet flows? The data flow is being tracked based on the source port number that is used by each application. The data flow is being tracked based on the destination IP address that is used by the PC of the technician. The data flow is being tracked based on the source IP address that is used by the PC of the technician. The data flow is being tracked based on the destination MAC address of the technician PC.

The data flow is being tracked based on the source port number that is used by each application.

What will happen if the default gateway address is incorrectly configured on a host? The host cannot communicate with hosts in other networks. The host cannot communicate with other hosts in the local network. A ping from the host to 127.0.0.1 would not be successful. The switch will not forward packets initiated by the host. The host will have to use ARP to determine the correct address of the default gateway.

The host cannot communicate with hosts in other networks.

Which type of security threat would be responsible if a spreadsheet add-on disables the local software firewall? Trojan horse brute-force attack DoS buffer overflow

Trojan horse

What are the two most effective ways to defend against malware? (Choose two.) Implement strong passwords. Update the operating system and other application software. Install and update antivirus software. Implement RAID. Implement a VPN. Implement network firewalls

Update the operating system and other application software. Install and update antivirus software.

Which wireless technology has low-power and data rate requirements making it popular in home automation applications? ZigBee 5G Wi-Fi LoRaWAN

ZigBee

Which three layers of the OSI model map to the application layer of the TCP/IP model? (Choose three.)Which three layers of the OSI model map to the application layer of the TCP/IP model? (Choose three.) transport application network session data link presentation

application session presentation

What are two functions that are provided by the network layer? (Choose two.) carrying data between processes that are running on source and destination hosts directing data packets to destination hosts on other networks providing dedicated end-to-end connections placing data on the network medium providing end devices with a unique network identifier

directing data packets to destination hosts on other networks providing end devices with a unique network identifier

What are two characteristics of IP? (Choose two.) retransmits packets if errors occur guarantees delivery of packets does not require a dedicated end-to-end connection operates independently of the network media re-assembles out of order packets into the correct order at the receiver end

does not require a dedicated end-to-end connection operates independently of the network media

Which frame field is created by a source node and used by a destination node to ensure that a transmitted data signal has not been altered by interference, distortion, or signal loss? transport layer error check field error correction process field flow control field User Datagram Protocol field frame check sequence field

frame check sequence field

Match the description to the IPv6 addressing component. (Not all options are used.) -This part of the address is used by an organization to identify subnets -This network portion of the address is assigned by the provider -This part of the address is the equivalent to the host portion of an ipv4 address

global routing prefix --This network portion of the address is assigned by the provider subnet ID --This part of the address is used by an organization to identify subnets interface ID --This part of the address is the equivalent to the host portion of an ipv4 address

Which layer of the TCP/IP model provides a route to forward messages through an internetwork? transport application network access internet

internet

What command can be used on a Windows PC to see the IP configuration of that computer? ipconfig show interfaces ping show ip interface brief

ipconfig

What are two common causes of signal degradation when using UTP cabling? (Choose two.) loss of light over long distances low-quality cable or connectors low-quality shielding in cable installing cables in conduit improper termination

low-quality cable or connectors improper termination

Refer to the exhibit. The switches are in their default configuration. Host A needs to communicate with host D, but host A does not have the MAC address for its default gateway. Which network hosts will receive the ARP request sent by host A? only hosts A, B, C, and D only router R1 only hosts A, B, and C only hosts B and C only hosts B, C, and router R1 only host D

only hosts B, C, and router R1

What are three commonly followed standards for constructing and installing cabling? (Choose three.) pinouts tensile strength of plastic insulator cable lengths connector types cost per meter (foot) connector color

pinouts cable lengths connector types

An employee of a large corporation remotely logs into the company using the appropriate username and password. The employee is attending an important video conference with a customer concerning a large sale. It is important for the video quality to be excellent during the meeting. The employee is unaware that after a successful login, the connection to the company ISP failed. The secondary connection, however, activated within seconds. The disruption was not noticed by the employee or other employees.What three network characteristics are described in this scenario? (Choose three.) integrity scalability quality of service fault tolerance powerline networking security

quality of service fault tolerance security

What characteristic describes adware? a network device that filters access and traffic coming into a network an attack that slows or crashes a device or network service the use of stolen credentials to access private data software that is installed on a user device and collects information about the user

software that is installed on a user device and collects information about the user

What characteristic describes identity theft? a tunneling protocol that provides remote users with secure access into the network of an organization the use of stolen credentials to access private data software that identifies fast-spreading threats software on a router that filters traffic based on IP addresses or applications

the use of stolen credentials to access private data

Why would a Layer 2 switch need an IP address? to enable the switch to be managed remotely to enable the switch to receive frames from attached PCs to enable the switch to send broadcast frames to attached PCs to enable the switch to function as a default gateway

to enable the switch to be managed remotely

What is the purpose of the TCP sliding window? to ensure that segments arrive in order at the destination to request that a source decrease the rate at which it transmits data to inform a source to retransmit data from a specific point forward to end communication when data transmission is complete

to request that a source decrease the rate at which it transmits data

A user is complaining that an external web page is taking longer than normal to load.The web page does eventually load on the user machine. Which tool should the technician use with administrator privileges in order to locate where the issue is in the network? ipconfig /displaydns nslookup tracert ping

tracert

Which two traffic types use the Real-Time Transport Protocol (RTP)? (Choose two.) web peer to peer file transfer video voice

video voice

A user is executing a tracert to a remote device. At what point would a router, which is in the path to the destination device, stop forwarding the packet? when the values of both the Echo Request and Echo Reply messages reach zero when the value in the TTL field reaches zero when the router receives an ICMP Time Exceeded message when the host responds with an ICMP Echo Reply message when the RTT value reaches zero

when the value in the TTL field reaches zero

Users report that the network access is slow. After questioning the employees, the network administrator learned that one employee downloaded a third-party scanning program for the printer. What type of malware might be introduced that causes slow performance of the network? spam virus worm phishing

worm

Match each description with an appropriate IP address. (Not all options are used.) -a private address -a loopback address -an experimental address -a TEST-NET address -a link-local address 172.19.20.5 127.0.0.1 240.2.6.255 192.0.2.123 169.254.1.5

-a private address 172.19.20.5 -a loopback address 127.0.0.1 -an experimental address 240.2.6.255 -a TEST-NET address 192.0.2.123 -a link-local address 169.254.1.5

A network administrator is adding a new LAN to a branch office. The new LAN must support 61 connected devices. What is the smallest network mask that the network administrator can use for the new network? 255.255.255.224 255.255.255.240 255.255.255.192 255.255.255.128

255.255.255.192

A network administrator is adding a new LAN to a branch office. The new LAN must support 25 connected devices. What is the smallest network mask that the network administrator can use for the new network? 255.255.255.224 255.255.255.192 255.255.255.240 255.255.255.128

255.255.255.224

A network administrator wants to have the same network mask for all networks at a particular small site. The site has the following networks and number of devices: IP phones - 22 addressesPCs - 20 addresses neededPrinters - 2 addresses neededScanners - 2 addresses needed The network administrator has deemed that 192.168.10.0/24 is to be the network used at this site. Which single subnet mask would make the most efficient use of the available addresses to use for the four subnetworks? 255.255.255.240 255.255.255.0 255.255.255.192 255.255.255.224 255.255.255.248 255.255.255.252

255.255.255.224

A network administrator wants to have the same subnet mask for three subnetworks at a small site. The site has the following networks and numbers of devices: Subnetwork A: IP phones - 10 addressesSubnetwork B: PCs - 8 addressesSubnetwork C: Printers - 2 addressesWhat single subnet mask would be appropriate to use for the three subnetworks? 255.255.255.240 255.255.255.0 255.255.255.248 255.255.255.252

255.255.255.240 The largest subnet in the topology has 100 hosts in it so the subnet mask must have at least 7 host bits in it (27-2=126). 255.255.255.0 has 8 hosts bits, but this does not meet the requirement of providing the maximum number of subnets.

An organization is assigned an IPv6 address block of 2001:db8:0:ca00::/56. How many subnets can be created without using bits in the interface ID space? 4096 256 512 1024

256

What service is provided by HTTP? An application that allows real-time chatting among remote users. Uses encryption to secure the exchange of text, graphic images, sound, and video on the web. Allows for data transfers between a client and a file server. A basic set of rules for exchanging text, graphic images, sound, video, and other multimedia files on the web.

A basic set of rules for exchanging text, graphic images, sound, video, and other multimedia files on the web.

What are two problems that can be caused by a large number of ARP request and reply messages? (Choose two.) A large number of ARP request and reply messages may slow down the switching process, leading the switch to make many changes in its MAC table. The ARP request is sent as a broadcast, and will flood the entire subnet. Switches become overloaded because they concentrate all the traffic from the attached subnets. All ARP request messages must be processed by all nodes on the local network. The network may become overloaded because ARP reply messages have a very large payload due to the 48-bit MAC address and 32-bit IP address that they contain.

A large number of ARP request and reply messages may slow down the switching process, leading the switch to make many changes in its MAC table. The ARP request is sent as a broadcast, and will flood the entire subnet.

Which scenario describes a function provided by the transport layer? A student has two web browser windows open in order to access two web sites. The transport layer ensures the correct web page is delivered to the correct browser window. A student is using a classroom VoIP phone to call home. The unique identifier burned into the phone is a transport layer address used to contact another network device on the same network. A corporate worker is accessing a web server located on a corporate network. The transport layer formats the screen so the web page appears properly no matter what device is being used to view the web site . A student is playing a short web-based movie with sound. The movie and sound are encoded within the transport layer header.

A student has two web browser windows open in order to access two web sites. The transport layer ensures the correct web page is delivered to the correct browser window.

What service is provided by Internet Messenger? An application that allows real-time chatting among remote users. Resolves domain names, such as cisco.com, into IP addresses. Uses encryption to provide secure remote access to network devices and servers. Allows remote access to network devices and servers.

An application that allows real-time chatting among remote users.

Which two statements describe how to assess traffic flow patterns and network traffic types using a protocol analyzer? (Choose two.) Capture traffic during peak utilization times to get a good representation of the different traffic types. Perform the capture on different network segments. Only capture WAN traffic because traffic to the web is responsible for the largest amount of traffic on a network. Only capture traffic in the areas of the network that receive most of the traffic such as the data center. Capture traffic on the weekends when most employees are off work

Capture traffic during peak utilization times to get a good representation of the different traffic types. Perform the capture on different network segments.

What happens when the transport input ssh command is entered on the switch vty lines?

Communication between the switch and remote users is encrypted.

What happens when the transport input ssh command is entered on the switch vty lines? The switch requires a username/password combination for remote access. The SSH client on the switch is enabled. Communication between the switch and remote users is encrypted. The switch requires remote connections via a proprietary client software.

Communication between the switch and remote users is encrypted.

Match the characteristic to the forwarding method. (Not all options are used.) -always store the entire frame -check the CRC before forwarding -checks the frame length before forwarding -does not forward broadcast -has low latency -may forward runt frames -begins forwarding when the destination address is recieved.

Cut-Through -has low latency -may forward runt frames -begins forwarding when the destination address is received. Store-and-Forward -always store the entire frame -check the CRC before forwarding -checks the frame length before forwarding

A client packet is received by a server. The packet has a destination port number of 67. What service is the client requesting? Telnet FTP SSH DHCP

DHCP

A client packet is received by a server. The packet has a destination port number of 53. What service is the client requesting? SSH FTP Telnet DNS

DNS

Which type of server relies on record types such as A, NS, AAAA, and MX in order to provide services? email file web DNS

DNS

A user is attempting to access http://www.cisco.com/ without success. Which two configuration values must be set on the host to allow this access? (Choose two.) source port number HTTP server source MAC address DNS server default gateway

DNS server default gateway

Which two statements are correct about MAC and IP addresses during data transmission if NAT is not involved? (Choose two.) Destination MAC addresses will never change in a frame that goes across seven routers. A packet that has crossed four routers has changed the destination IP address four times. Every time a frame is encapsulated with a new destination MAC address, a new destination IP address is needed. Destination and source MAC addresses have local significance and change every time a frame goes from one LAN to another. Destination IP addresses in a packet header remain constant along the entire path to a target host.

Destination and source MAC addresses have local significance and change every time a frame goes from one LAN to another. Destination IP addresses in a packet header remain constant along the entire path to a target host.

Which two statements describe features of an IPv4 routing table on a router? (Choose two.)​ Directly connected interfaces will have two route source codes in the routing table: C and S . The netstat -r command can be used to display the routing table of a router.​ If there are two or more possible routes to the same destination, the route associated with the higher metric value is included in the routing table. The routing table lists the MAC addresses of each active interface. If a default static route is configured in the router, an entry will be included in the routing table with source code S . It stores information about routes derived from the active router interfaces.

Directly connected interfaces will have two route source codes in the routing table: C and S . If a default static route is configured in the router, an entry will be included in the routing table with source code S .

A network administrator notices that some newly installed Ethernet cabling is carrying corrupt and distorted data signals. The new cabling was installed in the ceiling close to fluorescent lights and electrical equipment. Which two factors may interfere with the copper cabling and result in signal distortion and data corruption? (Choose two.) EMI signal attenuation crosstalk RFI​ extended length of cabling

EMI RFI

A new network administrator has been asked to enter a banner message on a Cisco device. What is the fastest way a network administrator could test whether the banner is properly configured? Enter CTRL-Z at the privileged mode prompt. Power cycle the device. Exit privileged EXEC mode and press Enter. Exit global configuration mode. Reboot the device

Exit privileged EXEC mode and press Enter.

A client packet is received by a server. The packet has a destination port number of 80. What service is the client requesting? DNS HTTP DHCP SMTP

HTTP

Match the characteristic to the category. (Not all options are used.) -Contained in layer 3 header -Contained in the layer 2 header -separated into OUI and a unique identifier -separated into a network portion and a unique identifier -32 or 128 bits -48 bits -64 bits

IP ADDRESS -Contained in layer 3 header -separated into a network portion and a unique identifier -32 or 128 bits MAC Address -Contained in the layer 2 header -separated into OUI and a unique identifier -48 bits

Refer to the exhibit. The network administrator has assigned the LAN of LBMISS an address range of 192.168.10.0. This address range has been subnetted using a /29 prefix. In order to accommodate a new building, the technician has decided to use the fifth subnet for configuring the new network (subnet zero is the first subnet). By company policies, the router interface is always assigned the first usable host address and the workgroup server is given the last usable host address. Which configuration should be entered into the properties of the workgroup server to allow connectivity to the Internet? IP address: 192.168.10.38 subnet mask: 255.255.255.248, default gateway: 192.168.10.33 IP address: 192.168.10.38 subnet mask: 255.255.255.240, default gateway: 192.168.10.33 IP address: 192.168.10.254 subnet mask: 255.255.255.0, default gateway: 192.168.10.1 IP address: 192.168.10.41 subnet mask: 255.255.255.248, default gateway: 192.168.10.46 IP address: 192.168.10.65 subnet mask: 255.255.255.240, default gateway: 192.168.10.76

IP address: 192.168.10.38 subnet mask: 255.255.255.248, default gateway: 192.168.10.33

What two pieces of information are displayed in the output of the show ip interface brief command? (Choose two.) speed and duplex settings MAC addresses next-hop addresses interface descriptions IP addresses Layer 1 statuses

IP addresses Layer 1 statuses

What are two features of ARP? (Choose two.) If a device receiving an ARP request has the destination IPv4 address, it responds with an ARP reply. When a host is encapsulating a packet into a frame, it refers to the MAC address table to determine the mapping of IP addresses to MAC addresses. If no device responds to the ARP request, then the originating node will broadcast the data packet to all devices on the network segment. An ARP request is sent to all devices on the Ethernet LAN and contains the IP address of the destination host and its multicast MAC address. If a host is ready to send a packet to a local destination device and it has the IP address but not the MAC address of the destination, it generates an ARP broadcast.

If a device receiving an ARP request has the destination IPv4 address, it responds with an ARP reply. If a host is ready to send a packet to a local destination device and it has the IP address but not the MAC address of the destination, it generates an ARP broadcast.

What mechanism is used by a router to prevent a received IPv4 packet from traveling endlessly on a network? It checks the value of the TTL field and if it is 100, it discards the packet and sends a Destination Unreachable message to the source host. It increments the value of the TTL field by 1 and if the result is 100, it discards the packet and sends a Parameter Problem message to the source host. It checks the value of the TTL field and if it is 0, it discards the packet and sends a Destination Unreachable message to the source host. It decrements the value of the TTL field by 1 and if the result is 0, it discards the packet and sends a Time Exceeded message to the source host.

It decrements the value of the TTL field by 1 and if the result is 0, it discards the packet and sends a Time Exceeded message to the source host.

What is an advantage to using a protocol that is defined by an open standard? An open standard protocol is not controlled or regulated by standards organizations. A company can monopolize the market. It encourages competition and promotes choices. The protocol can only be run on equipment from a specific vendor.

It encourages competition and promotes choices.

How does the service password-encryption command enhance password security on Cisco routers and switches? It requires encrypted passwords to be used when connecting remotely to a router or switch with Telnet. It encrypts passwords that are stored in router or switch configuration files. It requires that a user type encrypted passwords to gain console access to a router or switch. It encrypts passwords as they are sent across the network

It encrypts passwords that are stored in router or switch configuration files.

A client is using SLAAC to obtain an IPv6 address for its interface. After an address has been generated and applied to the interface, what must the client do before it can begin to use this IPv6 address? It must send an ICMPv6 Router Solicitation message to determine what default gateway it should use. It must send a DHCPv6 INFORMATION-REQUEST message to request the address of the DNS server. It must send a DHCPv6 REQUEST message to the DHCPv6 server to request permission to use this address. It must send an ICMPv6 Neighbor Solicitation message to ensure that the address is not already in use on the network.

It must send an ICMPv6 Neighbor Solicitation message to ensure that the address is not already in use on the network.

What is one main characteristic of the data link layer? It generates the electrical or optical signals that represent the 1 and 0 on the media. It converts a stream of data bits into a predefined code. It shields the upper layer protocol from being aware of the physical medium to be used in the communication. It accepts Layer 3 packets and decides the path by which to forward the packet to a remote network.

It shields the upper layer protocol from being aware of the physical medium to be used in the communication.

A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in its ARP cache. How will the device obtain a destination MAC address? It will send the frame and use its own MAC address as the destination. It will send the frame with a broadcast MAC address. It will send an ARP request for the MAC address of the destination device. It will send a request to the DNS server for the destination MAC address. It will send an ARP request for the MAC address of the default gateway.

It will send an ARP request for the MAC address of the default gateway.

A host is trying to send a packet to a device on a remote LAN segment, but there are currently no mappings in the ARP cache. How will the device obtain a destination MAC address? It will send an ARP request for the MAC address of the destination device. It will send the frame with a broadcast MAC address. It will send the frame and use the device MAC address as the destination. It will send an ARP request for the MAC address of the default gateway. It will send an ARP request to the DNS server for the destination MAC address.

It will send an ARP request for the MAC address of the default gateway.

Match the header field with the appropriate layer of the OSI model. (Not all options are used.) LAYER 2 LAYER 3 LAYER 4 -source IP address -Destination port number -destination options -FCS (Frame check sequence) -802.2 header -TTL (Time to LIVE) -Acknowledge number -Destination MAC address

LAYER 2 -802.2 header -FCS (Frame Check Sequence) -Destination MAC address LAYER 3 -TTL -Source IP address LAYER 4 -Acknowledgement Number -Destination Port Number

Refer to the exhibit. Host B on subnet Teachers transmits a packet to host D on subnet Students. Which Layer 2 and Layer 3 addresses are contained in the PDUs that are transmitted from host B to the router? Layer 2 destination address = 00-00-0c-94-36-ddLayer 2 source address = 00-00-0c-94-36-bbLayer 3 destination address = 172.16.20.200Layer 3 source address = 172.16.10.200 Layer 2 destination address = 00-00-0c-94-36-abLayer 2 source address = 00-00-0c-94-36-bbLayer 3 destination address = 172.16.20.200Layer 3 source address = 172.16.100.200 Layer 2 destination address = 00-00-0c-94-36-abLayer 2 source address = 00-00-0c-94-36-bbLayer 3 destination address = 172.16.20.200Layer 3 source address = 172.16.10.200 Layer 2 destination address = 00-00-0c-94-36-cdLayer 2 source address = 00-00-0c-94-36-bbLayer 3 destination address = 172.16.20.99Layer 3 source address = 172.16.10.200

Layer 2 destination address = 00-00-0c-94-36-abLayer 2 source address = 00-00-0c-94-36-bbLayer 3 destination address = 172.16.20.200Layer 3 source address = 172.16.10.200

What is an advantage for small organizations of adopting IMAP instead of POP? IMAP sends and retrieves email, but POP only retrieves email. POP only allows the client to store messages in a centralized way, while IMAP allows distributed storage. Messages are kept in the mail servers until they are manually deleted from the email client. When the user connects to a POP server, copies of the messages are kept in the mail server for a short time, but IMAP keeps them for a long time.

Messages are kept in the mail servers until they are manually deleted from the email client.

Which two statements accurately describe an advantage or a disadvantage when deploying NAT for IPv4 in a network? (Choose two.) NAT will impact negatively on switch performance. NAT causes routing tables to include more information. NAT improves packet handling. NAT adds authentication capability to IPv4. NAT provides a solution to slow down the IPv4 address depletion. NAT introduces problems for some applications that require end-to-end connectivity.

NAT provides a solution to slow down the IPv4 address depletion. NAT introduces problems for some applications that require end-to-end connectivity.

Match a statement to the related network model. (Not all options are used.) PEER-TO-PEER NETWORK PEER-TO-PEER APPLICATION -Requires a specific user interface -No dedicated server is required -a background service is required -client and server roles are set on a per request basis -devices can only function in one role at a time

PEER-TO-PEER NETWORK -No dedicated server is required -client and server roles are set on a per request basis PEER-TO-PEER APPLICATION -Requires a specific user interface -a background service is required

Match each item to the type of topology diagram on which it is typically identified. (Not all options are used.) -IP address of a server -location of a desktop PC in a classroom -USB port on a desktop PC in a classroom -path of cables that connect rooms to wiring closets

PHYSICAL TOPOLOGY DIAGRAM -location of a desktop PC in a classroom -path of cables that connect rooms to wiring closets LOGICAL TOPOLOGY DIAGRAM -USB port on a desktop PC in a classroom -IP address of a server

A client packet is received by a server. The packet has a destination port number of 110. What service is the client requesting? DNS DHCP POP3 SMTP

POP3

Match the type of threat with the cause. (Not all options are used.) -hardware threats -environmental threats -electrical threats -maintenance threats

Poor handling of key electrical components (Electrical static Discharge) lack of critical spare parts, poor cabling, and poor labeling. -maintenance threats temperature extremes (too hot or too cold) or humidity extremes (too wet or too dry) -environmental threats. physical damage to servers, routers, switches, cabling plant and workstations. -hardware threats. voltage spikes, insufficient supply voltage (brownouts), unconditioned power (noise), and total power loss -electrical threats.

Refer to the exhibit. The IP address of which device interface should be used as the default gateway setting of host H1? R2: S0/0/1 R1: G0/0 R2: S0/0/0 R1: S0/0/0

R1: G0/0

Which connector is used with twisted-pair cabling in an Ethernet LAN?

RJ45

A network administrator needs to keep the user ID, password, and session contents private when establishing remote CLI connectivity with a switch to manage it. Which access method should be chosen? AUX Telnet SSH Console

SSH

A client packet is received by a server. The packet has a destination port number of 69. What service is the client requesting? DHCP SMTP TFTP DNS

TFTP

What is the consequence of configuring a router with the ipv6 unicast-routing global configuration command? Each router interface will generate an IPv6 link-local address.​ The IPv6 enabled router interfaces begin sending ICMPv6 Router Advertisement messages. It statically creates a global unicast address on this router.​ All router interfaces will be automatically activated.

The IPv6 enabled router interfaces begin sending ICMPv6 Router Advertisement messages.

What is the consequence of configuring a router with the ipv6 unicast-routing global configuration command?​ All router interfaces will be automatically activated. Each router interface will generate an IPv6 link-local address.​ The IPv6 enabled router interfaces begin sending ICMPv6 Router Advertisement messages. It statically creates a global unicast address on this router.​

The IPv6 enabled router interfaces begin sending ICMPv6 Router Advertisement messages.

Which two statements are correct in a comparison of IPv4 and IPv6 packet headers? (Choose two.) The Destination Address field is new in IPv6. The Source Address field name from IPv4 is kept in IPv6. The Version field from IPv4 is not kept in IPv6. The Time-to-Live field from IPv4 has been replaced by the Hop Limit field in IPv6. The Header Checksum field name from IPv4 is kept in IPv6.

The Source Address field name from IPv4 is kept in IPv6. The Time-to-Live field from IPv4 has been replaced by the Hop Limit field in IPv6.

Refer to the exhibit. An administrator is trying to configure the switch but receives the error message that is displayed in the exhibit. What is the problem? Switch1> config t %invalid input detected marker.% The entire command, configure terminal , must be used. The administrator must connect via the console port to access global configuration mode. The administrator is already in global configuration mode. The administrator must first enter privileged EXEC mode before issuing the command.

The administrator must first enter privileged EXEC mode before issuing the command.

Refer to the exhibit. What three facts can be determined from the viewable output of the show ip interface brief command? (Choose three.) Two devices are attached to the switch. The default SVI has been configured. The switch can be remotely managed. Two physical interfaces have been configured. Passwords have been configured on the switch. One device is attached to a physical interface.

The default SVI has been configured. The switch can be remotely managed. One device is attached to a physical interface.

The global configuration command ip default-gateway 172.16.100.1 is applied to a switch. What is the effect of this command? The switch can communicate with other hosts on the 172.16.100.0 network. The switch can be remotely managed from a host on another network. The switch will have a management interface with the address 172.16.100.1. The switch is limited to sending and receiving frames to and from the gateway 172.16.100.1.

The switch can be remotely managed from a host on another network.

Refer to the exhibit. On the basis of the output, which two statements about network connectivity are correct? (Choose two.) This host does not have a default gateway configured . There are 4 hops between this device and the device at 192.168.100.1. The average transmission time between the two hosts is 2 milliseconds. There is connectivity between this device and the device at 192.168.100.1. The connectivity between these two hosts allows for videoconferencing calls

There are 4 hops between this device and the device at 192.168.100.1. There is connectivity between this device and the device at 192.168.100.1.

Match each type of frame field to its function. (Not all options are used.) -addressing -error detection -type -frame start

This field checks if the frame has been damaged during the transfer. -error detection This field helps to direct the frame toward its destination -addressing This field identifies the beginning of a frame -frame start This field is used by the LLC to identify the Layer 3 protocol -type

Which value, that is contained in an IPv4 header field, is decremented by each router that receives a packet? Differentiated Services Fragment Offset Header Length Time-to-Live

Time-to-Live

What service is provided by HTTPS? Allows remote access to network devices and servers. Resolves domain names, such as cisco.com, into IP addresses. Uses encryption to provide secure remote access to network devices and servers. Uses encryption to secure the exchange of text, graphic images, sound, and video on the web.

Uses encryption to secure the exchange of text, graphic images, sound, and video on the web.

What are two primary responsibilities of the Ethernet MAC sublayer? (Choose two.) accessing the media data encapsulation logical addressing error detection frame delimiting

accessing the media data encapsulation

Match each description with the corresponding TCP mechanism. (Not all options are used.) -number of bytes a destination device can accept and process at one time -used to identify missing segments of data -method of managing segments of data loss -received by a sender before transmitting more segments in a session.

acknowledgement -received by a sender before transmitting more segments in a session. retransmission -method of managing segments of data loss Sequence numbers --used to identify missing segments of data Window size -number of bytes a destination device can accept and process at one time

An IPv6 enabled device sends a data packet with the destination address of FF02::2. What is the target of this packet?​ all IPv6 enabled devices on the local link​ all IPv6 DHCP servers​ all IPv6 enabled devices across the network​ all IPv6 configured routers on the local link​

all IPv6 configured routers on the local link​

Refer to the exhibit. If Host1 were to transfer a file to the server, what layers of the TCP/IP model would be used? only application, Internet, and network access layers only application, transport, network, data link, and physical layers application, session, transport, network, data link, and physical layers only application and Internet layers application, transport, Internet, and network access layers only Internet and network access layers

application, transport, Internet, and network access layers

What characteristic describes antispyware? a tunneling protocol that provides remote users with secure access into the network of an organization a network device that filters access and traffic coming into a network applications that protect end devices from becoming infected with malicious software software on a router that filters traffic based on IP addresses or applications

applications that protect end devices from becoming infected with malicious software

Three bank employees are using the corporate network. The first employee uses a web browser to view a company web page in order to read some announcements. The second employee accesses the corporate database to perform some financial transactions. The third employee participates in an important live audio conference with other corporate managers in branch offices. If QoS is implemented on this network, what will be the priorities from highest to lowest of the different data types? financial transactions, web page, audio conference financial transactions, audio conference, web page audio conference, financial transactions, web page audio conference, web page, financial transactions

audio conference, financial transactions, web page

A company has a file server that shares a folder named Public. The network security policy specifies that the Public folder is assigned Read-Only rights to anyone who can log into the server while the Edit rights are assigned only to the network admin group. Which component is addressed in the AAA network service framework? automation authorization accounting authentication

authorization

Which two functions are performed at the MAC sublayer of the OSI Data Link Layer to facilitate Ethernet communication? (Choose two.) adds Ethernet control information to network protocol data integrates Layer 2 flows between 10 Gigabit Ethernet over fiber and 1 Gigabit Ethernet over copper handles communication between upper layer networking software and Ethernet NIC hardware implements CSMA/CD over legacy shared half-duplex media enables IPv4 and IPv6 to utilize the same physical medium

integrates Layer 2 flows between 10 Gigabit Ethernet over fiber and 1 Gigabit Ethernet over copper implements CSMA/CD over legacy shared half-duplex media

What does the term "attenuation" mean in data communication? strengthening of a signal by a networking device leakage of signals from one cable pair to another loss of signal strength as distance increases time for a signal to reach its destination

loss of signal strength as distance increases

What characteristic describes a Trojan horse? an attack that slows or crashes a device or network service malicious software or code running on an end device a network device that filters access and traffic coming into a network the use of stolen credentials to access private data

malicious software or code running on an end device

What characteristic describes a virus? the use of stolen credentials to access private data a network device that filters access and traffic coming into a network malicious software or code running on an end device an attack that slows or crashes a device or network service

malicious software or code running on an end device

What three requirements are defined by the protocols used in network communcations to allow message transmission across a network? (Choose three.) end-device installation media selection message encoding delivery options connector specifications message size

message encoding delivery options message size

A wired laser printer is attached to a home computer. That printer has been shared so that other computers on the home network can also use the printer. What networking model is in use? point-to-point client-based peer-to-peer (P2P) master-slave

peer-to-peer (P2P)

A group of Windows PCs in a new subnet has been added to an Ethernet network. When testing the connectivity, a technician finds that these PCs can access local network resources but not the Internet resources. To troubleshoot the problem, the technician wants to initially confirm the IP address and DNS configurations on the PCs, and also verify connectivity to the local router. Which three Windows CLI commands and utilities will provide the necessary information? (Choose three.) netsh interface ipv6 show neighbor arp -a tracert ping ipconfig nslookup telnet

ping ipconfig nslookup

What are two characteristics shared by TCP and UDP? (Choose two.) ability to to carry digitized voice 3-way handshake default window size connectionless communication port numbering use of checksum

port numbering use of checksum

What are proprietary protocols? protocols that can be freely used by any organization or vendor protocols developed by private organizations to operate on any vendor hardware a collection of protocols known as the TCP/IP protocol suite protocols developed by organizations who have control over their definition and operation

protocols developed by organizations who have control over their definition and operation

What is a function of the data link layer? provides delivery of data between two applications provides for the exchange of frames over a common local media provides end-to-end delivery of data between hosts provides the formatting of data

provides for the exchange of frames over a common local media

A disgruntled employee is using some free wireless networking tools to determine information about the enterprise wireless networks. This person is planning on using this information to hack the wireless network. What type of attack is this? access DoS Trojan horse reconnaissance

reconnaissance

Refer to the exhibit. If PC1 is sending a packet to PC2 and routing has been configured between the two routers, what will R1 do with the Ethernet frame header attached by PC1? open the header and use it to determine whether the data is to be sent out S0/0/0 open the header and replace the destination MAC address with a new one nothing, because the router has a route to the destination network remove the Ethernet header and configure a new Layer 2 header before sending it out S0/0/0

remove the Ethernet header and configure a new Layer 2 header before sending it out S0/0/0

A network administrator is designing the layout of a new wireless network. Which three areas of concern should be accounted for when building a wireless network? (Choose three.) mobility options security interference coverage area packet collision extensive cabling

security interference coverage area

What characteristic describes spyware? a network device that filters access and traffic coming into a network software that is installed on a user device and collects information about the user an attack that slows or crashes a device or network service the use of stolen credentials to access private data

software that is installed on a user device and collects information about the user

When a switch configuration includes a user-defined error threshold on a per-port basis, to which switching method will the switch revert when the error threshold is reached? fast-forward cut-through store-and-forward fragment-free

store-and-forward

Which switching method drops frames that fail the FCS check? store-and-forward switching ingress port buffering cut-through switching borderless switching

store-and-forward switching

What are the three parts of an IPv6 global unicast address? (Choose three.) subnet ID global routing prefix interface ID subnet mask broadcast address

subnet ID global routing prefix interface ID

A user sends an HTTP request to a web server on a remote network. During encapsulation for this request, what information is added to the address field of a frame to indicate the destination? the network domain of the destination host the MAC address of the default gateway the IP address of the default gateway the MAC address of the destination host

the MAC address of the default gateway

Which information does the show startup-config command display?​ the IOS image copied into RAM the bootstrap program in the ROM the contents of the saved configuration file in the NVRAM the contents of the current running configuration file in the RAM

the contents of the saved configuration file in the NVRAM

Users are reporting longer delays in authentication and in accessing network resources during certain time periods of the week. What kind of information should network engineers check to find out if this situation is part of a normal network behavior? syslog records and messages debug output and packet captures network configuration files the network performance baseline

the network performance baseline

What technique is used with UTP cable to help protect against signal interference from crosstalk? terminating the cable with special grounded connectors twisting the wires together into pairs wrapping a foil shield around the wire pairs encasing the cables within a flexible plastic sheath

twisting the wires together into pairs