NSE4 6.0 Practice Exam

¡Supera tus tareas y exámenes ahora con Quizwiz!

A DHCP server is connected to the VLAN10 interface. A DHCP client is connected to the VLAN5 interface. However, the DHCP client cannot get a dynamic IP address from the DHCP server. What is the cause of the problem? A. Both interfaces must belong to the same forward domain. B. The role of the VLAN10 interface must be set to server. C. Both interfaces must have the same VLAN ID. D. Both interfaces must be in different VDOMs.

A

A company needs to provide SSL VPN access to two user groups. The company also needs to display different welcome messages on the SSL VPN login screen for both user groups. What is required in the SSL VPN configuration to meet these requirements? A. Different SSL VPN realms for each group. B. Two separate SSL VPNs in different interfaces mapping the same ssl.root. C. Two firewall policies with different captive portals. D. Different virtual SSL VPN IP addresses for each group.

A

A team manager has decided that while some members of the team need access to particular website, the majority of the team does not. Which configuration option is the most effective option to support this request? A. Implement a web filter category override for the specified website. B. Implement web filter authentication for the specified website C. Implement web filter quotas for the specified website. D. Implement DNS filter for the specified website.

A

An administration wants to throttle the total volume of SMTP sessions to their email server. Which of the following DoS sensors can be used to achieve this? A. tcp_port_scan B. ip_dst_session C. udp_flood D. ip_src_session

A

An administrator is investigating a report of users having intermittent issues with browsing the web. The administrator ran diagnostics and received the output shown in the exhibit: # diagnose sys session stat misc info: session_count=16 setup_rate=0 exp_count=0 clash=889 memory_tension drop=0 Examine the diagnostic output shown exhibit. Which of the following options is the most likely cause of this issue? A. NAT port exhaustion B. High CPU usage C. High memory usage D. High session timeout value

A

An administrator wants to configure a FortiGate as a DNS server. FotiGate must use a DNS database first, and then relay all irresolvable queries to an external DNS server. Which of the following DNS methods must you use? A. Recursive B. Non-recursive C. Forward to primary and secondary DNS D. Forward to system DNS

A

How can you block or allow to Twitter using a firewall policy? A. Configure the Destination field as Internet Service objects for Twitter. B. Configure the Action field as Learn and select Twitter. C. Configure the Service field as Internet Service objects for Twitter. D. Configure the Source field as Internet Service objects for Twitter.

A

If the Services field is configured in a Virtual IP (VIP), which of the following statements is true when central NAT is used? A. The Services field removes the requirement of creating multiple VIPs for different services. B. The Services field is used when several VIPs need to be bundled into VIP groups. C. The Services field does not allow source NAT and destination NAT to be combined in the same policy. D. The Services field does not allow multiple sources of traffic, to use multiple services, to connect to a single computer.

A

NGFW mode allows policy-based configured for most inspection rules. Which security profile's configuration does not change when you enable policy-based inspection? A. Antivirus B. Web proxy C. Web filtering D. Application control

A

The FSSO Collector Agent set to advanced access mode for the Windows Active Directory uses which of the following? A. LDAP convention B. NTLM convention C. Windows convention - NetBios\Username D. RSSO convention

A

What information is flushed when the chunk-size value is changed in the config dlp settings? A. The database for DLP document fingerprinting B. The supported file types in the DLP filters C. The archived files and messages D. The file name patterns in the DLP filters

A

What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode? A. It limits the scope of application control to the browser-based technology category only. B. It limits the scope of application control to scan application traffic based on application category only. C. It limits the scope of application control to scan application traffic using parent signatures only D. It limits the scope of application control to scan application traffic on DNS protocol only.

A

When using SD-WAN, how do you configure the next-hop gateway address for a member interface so that FortiGate can forward Internet traffic? A. It must be configured in a static route using the sdwan virtual interface. B. It must be provided in the SD-WAN member interface configuration. C. It must be configured in a policy-route using the sdwan virtual interface. D. It must be learned automatically through a dynamic routing protocol.

A

Which is the correct description of a hash result as it relates to digital certificates? A. A unique value used to verify the input data B. An output value that is used to identify the person or deduce that authored the input data. C. An obfuscation used to mask the input data. D. An encrypted output value used to safe-guard the input data

A

Which statement about DLP on FortiGate is true? A. It can archive files and messages. B. It can be applied to a firewall policy in a flow-based VDOM C. Traffic shaping can be applied to DLP sensors. D. Files can be sent to FortiSandbox for detecting DLP threats.

A

Which statement regarding the firewall policy authentication timeout is true? A. It is an idle timeout. The FortiGate considers a user to be "idle" if it does not see any packets coming from the user's source IP. B. It is a hard timeout. The FortiGate removes the temporary policy for a user's source IP address after this timer has expired. C. It is an idle timeout. The FortiGate considers a user to be "idle" if it does not see any packets coming from the user's source MAC. D. It is a hard timeout. The FortiGate removes the temporary policy for a user's source MAC address after this timer has expired.

A

Why must you use aggressive mode when a local FortiGate IPSec gateway hosts multiple dialup tunnels? A. In aggressive mode, the remote peers are able to provide their peer IDs in the first message. B. FortiGate is able to handle NATed connections only in aggressive mode. C. FortiClient only supports aggressive mode. D. Main mode does not support XAuth for user authentication.

A

What criteria does FortiGate use to look for a matching firewall policy to process traffic? (Choose two.) A. Services defined in the firewall policy. B. Incoming and outgoing interfaces C. Highest to lowest priority defined in the firewall policy. D. Lowest to highest policy ID number.

A,B

Which of the following FortiGate configuration tasks will create a route in the policy route table? (Choose two.) A. Static route created with a Named Address object B. Static route created with an Internet Services object C. SD-WAN route created for individual member interfaces D. SD-WAN rule created to route traffic based on link latency

A,B

Which of the following statements about central NAT are true? (Choose two.) A. IP tool references must be removed from existing firewall policies before enabling central NAT. B. Central NAT can be enabled or disabled from the CLI only. C. Source NAT, using central NAT, requires at least one central SNAT policy. D. Destination NAT, using central NAT, requires a VIP object as the destination address in a firewall.

A,B

Which of the following statements about policy-based IPsec tunnels are true? (Choose two.) A. They can be configured in both NAT/Route and transparent operation modes. B. They support L2TP-over-IPsec. C. They require two firewall policies: one for each directions of traffic flow. D. They support GRE-over-IPsec.

A,B

Which statements about HA for FortiGate devices are true? (Choose two.) A. Sessions handled by proxy-based security profiles cannot be synchronized. B. Virtual clustering can be configured between two FortiGate devices that have multiple VDOMs. C. HA management interface settings are synchronized between cluster members. D. Heartbeat interfaces are not required on the primary device.

A,B

Which statements about antivirus scanning mode are true? (Choose two.) A. In proxy-based inspection mode antivirus buffers the whole file for scarring before sending it to the client. B. In flow-based inspection mode, you can use the CLI to configure antivirus profiles to use protocol option profiles. C. In proxy-based inspection mode, if a virus is detected, a replacement message may not be displayed immediately. D. In quick scan mode, you can configure antivirus profiles to use any of the available signature data bases.

A,B

Which statements are true regarding firewall policy NAT using the outgoing interface IP address with fixed port disabled? (Choose two.) A. This is known as many-to-one NAT. B. Source IP is translated to the outgoing interface IP. C. Connections are tracked using source port and source MAC address. D. Port address translation is not used.

A,B

An administrator is running the following sniffer command: diagnose sniffer packet any "host 10.0.2.10" 3 What information will be included in the sniffer output? (Choose three.) A. IP header B. Ethernet header C. Packet payload D. Application header E. Interface name

A,B,C

An administrator observes that the port1 interface cannot be configured with an IP address. What can be the reasons for that? (Choose three.) A. The interface has been configured for one-arm sniffer. B. The interface is a member of a virtual wire pair. C. The operation mode is transparent. D. The interface is a member of a zone. E. Captive portal is enabled in the interface.

A,B,C

An administrator wants to create a policy-based IPsec VPN tunnel betweeb two FortiGate devices. Which configuration steps must be performed on both devices to support this scenario? (Choose three.) A. Define the phase 1 parameters, without enabling IPsec interface mode B. Define the phase 2 parameters. C. Set the phase 2 encapsulation method to transport mode D. Define at least one firewall policy, with the action set to IPsec. E. Define a route to the remote network over the IPsec tunnel.

A,B,D

Which of the following are purposes of NAT traversal in IPsec? (Choose two.) A. To delete intermediary NAT devices in the tunnel path. B. To dynamically change phase 1 negotiation mode aggressive mode. C. To encapsulation ESP packets in UDP packets using port 4500. D. To force a new DH exchange with each phase 2 rekey.

A,C

Which of the following are valid actions for FortiGuard category based filter in a web filter profile ui proxy-based inspection mode? (Choose two.) A. Warning B. Exempt C. Allow D. Learn

A,C

Which of the following route attributes must be equal for static routes to be eligible for equal cost multipath (ECMP) routing? (Choose two.) A. Priority B. Metric C. Distance D. Cost

A,C

Which of the following statements about converse mode are true? (Choose two.) A. FortiGate stops sending files to FortiSandbox for inspection. B. FortiGate stops doing RPF checks over incoming packets. C. Administrators cannot change the configuration. D. Administrators can access the FortiGate only through the console port.

A,C

Which of the following statements are true when using WPAD with the DHCP discovery method? (Choose two.) A. If the DHCP method fails, browsers will try the DNS method. B. The browser needs to be preconfigured with the DHCP server's IP address. C. The browser sends a DHCPONFORM request to the DHCP server. D. The DHCP server provides the PAC file for download.

A,C

Which statements best describe auto discovery VPN (ADVPN). (Choose two.) A. It requires the use of dynamic routing protocols so that spokes can learn the routes to other spokes. B. ADVPN is only supported with IKEv2. C. Tunnels are negotiated dynamically between spokes. D. Every spoke requires a static tunnel to be configured to other spokes so that phase 1 and phase 2 proposals are defined in advance.

A,C

What types of traffic and attacks can be blocked by a web application firewall (WAF) profile? (Choose three.) A. Traffic to botnetservers B. Traffic to inappropriate web sites C. Server information disclosure attacks D. Credit card data leaks E. SQL injection attacks

A,C,E

Which of the following conditions are required for establishing an IPSec VPN between two FortiGate devices? (Choose two.) A. If XAuth is enabled as a server in one peer, it must be enabled as a client in the other peer. B. If the VPN is configured as route-based, there must be at least one firewall policy with the action set to IPSec. C. If the VPN is configured as DialUp User in one peer, it must be configured as either Static IP Address or Dynamic DNS in the other peer. D. If the VPN is configured as a policy-based in one peer, it must also be configured as policy-based in the other peer.

A,D

Which of the following statements about NTLM authentication are correct? (Choose two.) A. It is useful when users log in to DCs that are not monitored by a collector agent. B. It takes over as the primary authentication method when configured alongside FSSO. C. Multi-domain environments require DC agents on every domain controller. D. NTLM-enabled web browsers are required.

A,D

Which of the following statements about virtual domains (VDOMs) are true? (Choose two.) A. The root VDOM is the management VDOM by default. B. A FortiGate device has 64 VDOMs, created by default. C. Each VDOM maintains its own system time. D. Each VDOM maintains its own routing table.

A,D

Which of the following statements are best practices for troubleshooting FSSO? (Choose two.) A. Include the group of guest users in a policy. B. Extend timeout timers. C. Guarantee at least 34 Kbps bandwidth between FortiGate and domain controllers. D. Ensure all firewalls allow the FSSO required ports.

A,D

Which of the following statements correctly describes FortiGates route lookup behavior when searching for a suitable gateway? (Choose two) A. Lookup is done on the trust packet from the session originator B. Lookup is done on the last packet sent from the responder C. Lookup is done on every packet, regardless of direction D. Lookup is done on the trust reply packet from the responder

A,D

Which statement is true regarding SSL VPN timers? (Choose two.) A. Allow to mitigate DoS attacks from partial HTTP requests. B. SSL VPN settings do not have customizable timers. C. Disconnect idle SSL VPN users when a firewall policy authentication timeout occurs. D. Prevent SSL VPN users from being logged out because of high network latency.

A,D

A FortiGate is operating in NAT mode and configured with two virtual LAN (VLAN) sub interfaces added to the physical interface. Which statements about the VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in different subnets. A. The two VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in different subnets. B. The two VLAN sub interfaces must have different VLAN IDs. C. The two VLAN sub interfaces can have the same VLAN ID, only if they belong to different VDOMs. D. The two VLAN sub interfaces can have the same VLAN ID, only if they have IP addresses in the same subnet.

B

An administrator has configured central DNAT and virtual IPs. Which of the following can be selected in the firewall policy Destination field? A. A VIP group B. The mapped IP address object of the VIP object C. A VIP object D. An IP pool

B

An administrator is configuring an Ipsec between site A and siteB. The Remotes Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.16.1.0/24 and the remote quick mode selector is 192.16.2.0/24. How must the administrator configure the local quick mode selector for site B? A. 192.168.3.0/24 B. 192.168.2.0/24 C. 192.168.1.0/24 D. 192.168.0.0/8

B

How does FortiGate select the central SNAT policy that is applied to a TCP session? A. It selects the SNAT policy specified in the configuration of the outgoing interface. B. It selects the first matching central SNAT policy, reviewing from top to bottom. C. It selects the central SNAT policy with the lowest priority. D. It selects the SNAT policy specified in the configuration of the firewall policy that matches the traffic.

B

How does FortiGate verify the login credentials of a remote LDAP user? A. FortiGate regenerates the algorithm based on the login credentials and compares it to the algorithm stored on the LDAP server. B. FortiGate sends the user-entered credentials to the LDAP server for authentication. C. FortiGate queries the LDAP server for credentials. D. FortiGate queries its own database for credentials.

B

NGFW mode allows policy-based configuration for most inspection rules. Which security profile's configuration does not change when you enable policy-based inspection? A. Web filtering B. Antivirus C. Web proxy D. Application control

B

Which is a requirement for creating an inter-VDOM link between two VDOMs? A. The inspection mode of at least one VDOM must be proxy-based. B. At least one of the VDOMs must operate in NAT mode. C. The inspection mode of both VDOMs must match. D. Both VDOMs must operate in NAT mode.

B

Which statement about FortiGuard services for FortiGate is true? A. The web filtering database is downloaded locally on FortiGate. B. Antivirus signatures are downloaded locally on FortiGate. C. FortiGate downloads IPS updates using UDP port 53 or 8888. D. FortiAnalyzer can be configured as a local FDN to provide antivirus and IPS updates.

B

You have tasked to design a new IPsec deployment with the following criteria: There are two HQ sues that all satellite offices must connect to The satellite offices do not need to communicate directly with other satellite offices No dynamic routing will be used The design should minimize the number of tunnels being configured. Which topology should be used to satisfy all of the requirements? A. Partial mesh B. Hub-and-spoke C. Fully meshed D. Redundant

B

HTTP Public Key Pinning (HPKP) can be an obstacle to implementing full SSL inspection. What solutions could resolve this problem? (Choose two.) A. Enable Allow Invalid SSL Certificates for the relevant security profile. B. Change web browsers to one that does not support HPKP. C. Exempt those web sites that use HPKP from full SSL inspection. D. Install the CA certificate (that is required to verify the web server certificate) stores of users' computers.

B,C

What settings must you configure to ensure FortiGate generates logs for web filter activity on a firewall policy called Full Access? (Choose two.) A. Enable Event Logging. B. Enable a web filter security profile on the Full Access firewall policy. C. Enable Log Allowed Traffic on the Full Access firewall policy. D. Enable disk logging.

B,C

When configuring the root FortiGate to communicate with a downstream FortiGate, which settings are required to be configured? (Choose two.) A. Device detection enabled. B. Administrative Access: FortiTelemetry. C. IP/Network Mask. D. Role: Security Fabric.

B,C

Which of the following statements about backing up logs from the CLI and downloading logs from the GUI are true? (Choose two.) A. Log downloads from the GUI are limited to the current filter view B. Log backups from the CLI cannot be restored to another FortiGate. C. Log backups from the CLI can be configured to upload to FTP as a scheduled time D. Log downloads from the GUI are stored as LZ4 compressed files.

B,C

Which statements about DNS filter profiles are true? (Choose two.) A. They can inspect HTTP traffic. B. They can redirect blocked requests to a specific portal. C. They can block DNS requests to known botnet command and control servers. D. They must be applied in firewall policies with SSL inspection enabled.

B,C

Which statements about a One-to-One IP pool are true? (Choose two.) A. It is used for destination NAT. B. It allows the fixed mapping of an internal address range to an external address range. C. It does not use port address translation. D. It allows the configuration of ARP replies.

B,C

An administrator needs to strengthen the security for SSL VPN access. Which of the following statements are best practices to do so? (Choose three.) A. Configure split tunneling for content inspection. B. Configure host restrictions by IP or MAC address. C. Configure two-factor authentication using security certificates. D. Configure SSL offloading to a content processor (FortiASIC). E. Configure a client integrity check (host-check).

B,C,E

Which of the following services can be inspected by the DLP profile? (Choose three.) A. NFS B. FTP C. IMAP D. CIFS E. HTTP-POST

B,C,E

An administrator is attempting to allow access to https://fortinet.com through a firewall policy that is configured with a web filter and an SSL inspection profile configured for deep inspection. Which of the following are possible actions to eliminate the certificate error generated by deep inspection? (Choose two.) A. Implement firewall authentication for all users that need access to fortinet.com. B. Manually install the FortiGate deep inspection certificate as a trusted CA. C. Configure fortinet.com access to bypass the IPS engine. D. Configure an SSL-inspection exemption for fortinet.com.

B,D

On a FortiGate with a hard disk, how can you upload logs to FortiAnalyzer or FortiManager? (Choose two.) A. hourly B. real time C. on-demand D. store-and-upload

B,D

Which configuration objects can be selected for the Source field of a firewall policy? (Choose two.) A. Firewall service B. User or user group C. IP Pool D. FQDN address

B,D

Which statements correctly describe transparent mode operation? (Choose three.) A. All interfaces of the transparent mode FortiGate device must be on different IP subnets. B. Ethernet packets are forwarded based on destination MAC addresses, not IP addresses. C. The transparent FortiGate is visible to network hosts in an IP traceroute. D. It permits inline traffic inspection and firewalling without changing the IP scheme of the network. E. FortiGate acts as transparent bridge and forwards traffic at Layer 2.

B,D,E

A FortiGate device has multiple VDOMs. Which statement about an administrator account configured with the default prof_admin profile is true? A. It can create administrator accounts with access to the same VDOM. B. It cannot have access to more than one VDOM. C. It can reset the password for the admin account. D. It can upgrade the firmware on the FortiGate device.

C

An administrator has configured a dialup IPsec VPN with XAuth. Which statement best describes what occurs during this scenario? A. Phase 1 negotiations will skip preshared key exchange. B. Only digital certificates will be accepted as an authentication method in phase 1.C C. Dialup clients must provide a username and password for authentication. D. Dialup clients must provide their local ID during phase 2 negotiations.

C

An administrator has configured a route-based IPsec VPN between two FortiGate devices. Which statement about this IPsec VPN configuration is true? A. A phase 2 configuration is not required. B. This VPN cannot be used as part of a hub-and-spoke topology. C. A virtual IPsec interface is automatically created after the phase 1 configuration is completed. D. The IPsec firewall policies must be placed at the top of the list.

C

If traffic matches a DLP filter with the action set to Quarantine IP Address, what action does FortiGate take? A. It notifies the administrator by sending an email. B. It provides a DLP block replacement page with a link to download the file. C. It blocks all future traffic for that IP address for a configured interval. D. It archives the data for that IP address.

C

What FortiGate configuration is required to actively prompt users for credentials? A. You must enable one or more protocols that support active authentication on a firewall policy. B. You must position the firewall policy for active authentication before a firewall policy for passive authentication C. You must assign users to a group for active authentication D. You must enable the Authentication setting on the firewall policy.

C

What files are sent to FortiSandbox for inspection in flow-based inspection mode? A. All suspicious files that do not have their hash value in the FortiGuard antivirus signature database. B. All suspicious files that are above the defined oversize limit value in the protocol options. C. All suspicious files that match patterns defined in the antivirus profile. D. All suspicious files that are allowed to be submitted to FortiSandbox in the antivirus profile.

C

When override is enabled, which of the following shows the process and selection criteria that are used to elect the primary FortiGate in an HA cluster? A. Connected monitored ports > HA uptime > priority > serial number B. Priority > Connected monitored ports > HA uptime > serial number C. Connected monitored ports > priority > HA uptime > serial number D. HA uptime > priority > Connected monitored ports > serial number

C

When using WPAD DNS method, which FQDN format do browsers use to query the DNS server? A. srv_proxy.<local-domain>/wpad.dat B. srv_tcp.wpad.<local-domain> C. wpad.<local-domain> D. proxy.<local-domain>.wpad

C

Which of the following conditions must be met in order for a web browser to trust a web server certificate signed by a third-party CA? A. The public key of the web server certificate must be installed on the browser. B. The web-server certificate must be installed on the browser. C. The CA certificate that signed the web-server certificate must be installed on the browser. D. The private key of the CA certificate that signed the browser certificate must be installed on the browser.

C

Which one of the following processes is involved in updating IPS from FortiGuard? A. FortiGate IPS update requests are sent using UDP port 443. B. Protocol decoder update requests are sent to service.fortiguard.net. C. IPS signature update requests are sent to update.fortiguard.net. D. IPS engine updates can only be obtained using push updates.

C

Which statement about the IP authentication header (AH) used by IPsec is true? A. AH does not provide any data integrity or encryption. B. AH does not support perfect forward secrecy. C. AH provides data integrity bur no encryption. D. AH provides strong data integrity but weak encryption.

C

Which statement is true regarding the policy ID number of a firewall policy? A. Defines the order in which rules are processed. B. Represents the number of objects used in the firewall policy. C. Required to modify a firewall policy using the CLI. D. Changes when firewall policies are reordered.

C

Which users and user groups are allowed access to the network through captive portal? A. Users and groups defined in the firewall policy. B. Only individual users - not groups - defined in the captive portal configuration C. Groups defined in the captive portal configuration D. All users

C

Which Statements about virtual domains (VDOMs) arc true? (Choose two.) A. Transparent mode and NAT/Route mode VDOMs cannot be combined on the same FortiGate. B. Each VDOM can be configured with different system hostnames. C. Different VLAN sub-interface of the same physical interface can be assigned to different VDOMs. D. Each VDOM has its own routing table.

C,D

Which of the following SD-WAN load -balancing method use interface weight value to distribute traffic? (Choose two.) A. Source IP B. Spillover C. Volume D. Session

C,D

Which of the following statements describe WMI polling mode for the FSSO collector agent? (Choose two.) A. The NetSessionEnum function is used to track user logoffs. B. WMI polling can increase bandwidth usage in large networks. C. The collector agent uses a Windows API to query DCs for user logins. D. The collector agent do not need to search any security event logs.

C,D

Which statements about the firmware upgrade process on an active-active HA cluster are true? (Choose two.) A. The firmware image must be manually uploaded to each FortiGate. B. Only secondary FortiGate devices are rebooted. C. Uninterruptable upgrade is enabled by default. D. Traffic load balancing is temporally disabled while upgrading the firmware.

C,D

What FortiGate components are tested during the hardware test? (Choose three.) A. Administrative access B. HA heartbeat C. CPU D. Hard disk E. Network interfaces

C,D,E

An administrator is configuring an antivirus profiles on FortiGate and notices that Proxy Options is not listed under Security Profiles on the GUI. What can cause this issue? A. FortiGate needs to be switched to NGFW mode. B. Proxy options section is hidden by default and needs to be enabled from the Feature Visibility menu. C. Proxy options are no longer available starting in FortiOS 5.6. D. FortiGate is in flow-based inspection mode.

D

An administrator needs to create an SSL-VPN connection for accessing an internal server using the bookmark Port Forward. What step is required for this configuration? A. Configure an SSL VPN realm for clients to use the port forward bookmark. B. Configure the client application to forward IP traffic through FortiClient. C. Configure the virtual IP address to be assigned t the SSL VPN users. D. Configure the client application to forward IP traffic to a Java applet proxy.

D

By default, when logging to disk, when does FortiGate delete logs? A. 30 days B. 1 year C. Never D. 7 days

D

During the digital verification process, comparing the original and fresh hash results satisfies which security requirement? A. Authentication. B. Data integrity. C. Non-repudiation. D. Signature verification.

D

How do you format the FortiGate flash disk? A. Load a debug FortiOS image. B. Load the hardware test (HQIP) image. C. Execute the CLI command execute formatlogdisk. D. Select the format boot device option from the BIOS menu.

D

If the Issuer and Subject values are the same in a digital certificate, which type of entity was the certificate issued to? A. A CRL B. A person C. A subordinate CA D. A root CA

D

In a high availability (HA) cluster operating in active-active mode, which of the following correctly describes the path taken by the SYN packet of an HTTP session that is offloaded to a secondary FortiGate? A. Client > primary FortiGate> secondary FortiGate> primary FortiGate> web server. B. Client > secondary FortiGate> web server. C. Clinet >secondary FortiGate> primary FortiGate> web server. D. Client> primary FortiGate> secondary FortiGate> web server.

D

When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP address is used as the source of the HTTP request? A. remote user's public IP address B. The public IP address of the FortiGate device. C. The remote user's virtual IP address. D. The internal IP address of the FortiGate device.

D

Which action can be applied to each filter in the application control profile? A. Block, monitor, warning, and quarantine B. Allow, monitor, block and learn C. Allow, block, authenticate, and warning D. Allow, monitor, block, and quarantine

D

Which of the following features is supported by web filter in flow-based inspection mode with NGFW mode set to profile-based? A. FortiGuard Quotas B. Static URL C. Search engines D. Rating option

D

Which of the following statements about the FSSO collector agent timers is true? A. The workstation verify interval is used to periodically check of a workstation is still a domain member. B. The IP address change verify interval monitors the server IP address where the collector agent is installed, and the updates the collector agent configuration if it changes. C. The user group cache expiry is used to age out the monitored groups. D. The dead entry timeout interval is used to age out entries with an unverified status.

D

Which of the following statements is true regarding SSL VPN settings for an SSL VPN portal? A. By default, FortiGate uses WINS servers to resolve names. B. By default, the SSL VPN portal requires the installation of a client's certificate. C. By default, split tunneling is enabled. D. By default, the admin GUI and SSL VPN portal use the same HTTPS port.

D

Which of the following static routes are not maintained in the routing table? A. Named Address routes B. Dynamic routes C. ISDB routes D. Policy routes

D

Why does FortiGate keep TCP sessions in the session table for some seconds even after both sides (client and server) have terminated the session? A. To remove the NAT operation. B. To generate logs C. To finish any inspection operations. D. To allow for out-of-order packets that could arrive after the FIN/ACK packets.

D

An administrator has configured the WINDOS_SERVERS IPS sensor in an attempt to determine whether the influx of HTTPS traffic is an attack attempt or not. After applying the IPS sensor, FortiGate is still not generating any IPS logs for the HTTPS traffic. What is a possible reason for this? A. The IPS filter is missing the Protocol: HTTPS option. B. The HTTPS signatures have not been added to the sensor. C. A DoS policy should be used, instead of an IPS sensor. D. A DoS policy should be used, instead of an IPS sensor. E. The firewall policy is not using a full SSL inspection profile.

E


Conjuntos de estudio relacionados

CIS 308 - Mobile and Wireless Technology

View Set

Role Transition modules 1-6 self check questions

View Set

Cyberattacks, Cybersecurity, Privacy, Freedom of Expression, Intellectual Property

View Set

CST Chapter 9 The principles and practice of aseptic technique

View Set

English File Upper Int 5B: Feeling Adjective Forms

View Set

Humanistic psychology: Key terms

View Set

Salesforce AI Associate Study Set

View Set