Online Practice Questions

HOTSPOT - From Azure Sentinel, you open the Investigation pane for a high-severity incident as shown in the following exhibit. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. NOTE: Each correct selection is worth one point. Hot Area: if you hover over the virtual machine named vm1 you can view: ? if you select [ ? ], you can navigate to the items

1. therunning process 2. timeline

HOTSPOT - You have a Microsoft 365 E5 subscription that contains 200 Windows 10 devices enrolled in Microsoft Defender for Endpoint. You need to ensure that users can access the devices by using a remote shell connection directly from the Microsoft 365 Defender portal. The solution must use the principle of least privilege. What should you do in the Microsoft 365 Defender portal? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: to configure Microsoft defender for endpoint To configure the devices

1. turn on live response 2. create device group that contains the devices. and make sure its set to no automation.

You are configuring Azure Sentinel. You need to send a Microsoft Teams message to a channel whenever a sign-in from a suspicious IP address is detected. Which two actions should you perform in Azure Sentinel? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Add a playbook. B. Associate a playbook to an incident.

You are investigating a potential attack that deploys a new ransomware strain. You have three custom device groups. The groups contain devices that store highly sensitive information. You plan to perform automated actions on all devices. You need to be able to temporarily group the machines to perform actions on the devices. Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Assign a tag to the device group. C. Add a tag to the machines. D. Create a new device group that has a rank of 1.

You use Azure Sentinel. You need to use a built-in role to provide a security analyst with the ability to edit the queries of custom Azure Sentinel workbooks. The solution must use the principle of least privilege. Which role should you assign to the analyst?

A. Azure Sentinel Contributor

Your company uses Azure Sentinel. A new security analyst reports that she cannot assign and resolve incidents in Azure Sentinel. You need to ensure that the analyst can assign and resolve incidents. The solution must use the principle of least privilege. Which role should you assign to the analyst?

A. Azure Sentinel Responder

Question #15 Topic 2 You have an Azure subscription that contains a Log Analytics workspace. You need to enable just-in-time (JIT) VM access and network detections for Azure resources. Where should you enable Azure Defender?

A. at the subscription level

A company uses Azure Sentinel. You need to create an automated threat response. What should you use?

B. a playbook

You have five on-premises Linux servers. You have an Azure subscription that uses Microsoft Defender for Cloud. You need to use Defender for Cloud to protect the Linux servers. What should you install on the servers first?

B. the Log Analytics agent

Your company has a single office in Istanbul and a Microsoft 365 subscription. The company plans to use conditional access policies to enforce multi-factor authentication (MFA). You need to enforce MFA for all users who work remotely. What should you include in the solution?

C. a named location

You have a Microsoft 365 subscription that has Microsoft 365 Defender enabled. You need to identify all the changes made to sensitivity labels during the past seven days. What should you use?

C. Activity explorer in the Microsoft 365 compliance center

You have an Azure Sentinel deployment in the East US Azure region. You create a Log Analytics workspace named LogsWest in the West US Azure region. You need to ensure that you can use scheduled analytics rules in the existing Azure Sentinel deployment to generate alerts based on queries to LogsWest. What should you do first?

C. Add Azure Sentinel to a workspace.

You receive a security bulletin about a potential attack that uses an image file. You need to create an indicator of compromise (IoC) in Microsoft Defender for Endpoint to prevent the attack. Which indicator type should you use?

C. a file hash indicator that has Action set to Alert and block

You have a playbook in Azure Sentinel. When you trigger the playbook, it sends an email to a distribution group. You need to modify the playbook to send the email to the owner of the resource instead of the distribution group. What should you do?

D. Add an alert and modify the action.

You are investigating an incident in Azure Sentinel that contains more than 127 alerts. You discover eight alerts in the incident that require further investigation. You need to escalate the alerts to another Azure Sentinel administrator. What should you do to provide the alerts to the administrator?

D. Assign the incident

You need to configure Microsoft Cloud App Security to generate alerts and trigger remediation actions in response to external sharing of confidential files. Which two actions should you perform in the Cloud App Security portal? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

D. From Settings, select Information Protection, select Azure Information Protection, and then select Automatically scan new files for Azure Information Protection classification labels and content inspection warnings. E. From Settings, select Information Protection, select Files, and then enable file monitoring.

You are investigating an incident by using Microsoft 365 Defender. You need to create an advanced hunting query to count failed sign-in authentications on three devices named CFOLaptop, CEOLaptop, and COOLaptop. How should you complete the query? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Select and Place:

DeviceLogonEvents | where DeviceName in ("CFOLaptop" , "CEOLaptop" ) and ActionType == "LogonFailed" | summarize LogonFailures=count() by DeviceName , LogonType

HOTSPOT - You have an Azure Storage account that will be accessed by multiple Azure Function apps during the development of an application. You need to hide Azure Defender alerts for the storage account. Which entity type and field should you use in a suppression rule? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: entity type? field?

Entity Type = Azure Resource (Azure Storage is a Resource) Field = Resource ID (All Azure resources have an ID)

You implement Safe Attachments policies in Microsoft Defender for Office 365. Users report that email messages containing attachments take longer than expected to be received. You need to reduce the amount of time it takes to deliver messages that contain attachments without compromising security. The attachments must be scanned for malware, and any messages that contain malware must be blocked. What should you configure in the Safe Attachments policies?

A. Dynamic Delivery

Your company uses Azure Security Center and Azure Defender. The security operations team at the company informs you that it does NOT receive email notifications for security alerts. What should you configure in Security Center to enable the email notifications?

"Environment Settings" -> "Email notifications" and C. Pricing & settings

DRAG DROP - You have an Azure Functions app that generates thousands of alerts in Azure Security Center each day for normal activity. You need to hide the alerts automatically in Security Center. Which three actions should you perform in sequence in Security Center? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point. Select and Place:

"select security alerts" means "Select Suppression rules" "select Azure Resource as the entity type and specify the resources ID

You open the Cloud App Security portal as shown in the following exhibit. Your environment does NOT have Microsoft Defender for Endpoint enabled. You need to remediate the risk for the Launchpad app. Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order

1 select the app 2. tag the app as unsantioned 3. generate a block script 4. run the script on the source appliance.

DRAG DROP - You plan to connect an external solution that will send Common Event Format (CEF) messages to Azure Sentinel. You need to deploy the log forwarder. Which three actions should you perform in sequence? To answer, move the appropriate actions form the list of actions to the answer area and arrange them in the correct order. Select and Place:

1- Installs the Log Analytics agent for Linux (also known as the OMS agent) and configures it for the following purposes: --- listening for CEF messages from the built-in Linux Syslog daemon on TCP port 25226 --- sending the messages securely over TLS to your Microsoft Sentinel workspace, where they are parsed and enriched 2- Configures the built-in Linux Syslog daemon (rsyslog.d/syslog-ng) for the following purposes: --- listening for Syslog messages from your security solutions on TCP port 514 --- forwarding only the messages it identifies as CEF to the Log Analytics agent on localhost using TCP port 25226 The need for restarting the daemon and the agent is to ensure the changes take effect (on Linux this is required)

HOTSPOT - You use Azure Sentinel to monitor irregular Azure activity. You create custom analytics rules to detect threats as shown in the following exhibit. You do NOT define any incident settings as part of the rule definition. Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic. if a user deploys three azure virtual machines simultaneously, how many time will you receive and alersts in the next five hours? if three seperate users deploy one azure virtual machines each within five minutes of each other, you will receive ?

1. 0 alert 2. 1 alert

DRAG DROP - You need to use an Azure Sentinel analytics rule to search for specific criteria in Amazon Web Services (AWS) logs and to generate incidents. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

1. add the amazon web service connector 2. from analytics in azure sentinel, create a custome analytics rule that uses a scheduled query 3. set an alert logic

Your company uses line-of-business apps that contain Microsoft Office VBA macros. You need to prevent users from downloading and running additional payloads from the Office VBA macros as additional child processes. Which two commands can you run to achieve the goal? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

1. add-MpPreference -AttackSurfaceReductionRules_Ids D4f940ab -401b -4efc -aadc -ad5f3c50688a -attacksurfacereductionrules_actions enabled 2. set-MpPreference -AttackSurfaceReductionRules_Ids D4f940ab -401b -4efc -aadc -ad5f3c50688a -attacksurfacereductionrules_actions enabled

DRAG DROP - You have resources in Azure and Google cloud. You need to ingest Google Cloud Platform (GCP) data into Azure Defender. In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

1. configure the GCP Security Command Center 2. Enable Security Health Analytics 3. Enable the GCP Security Command Center API 4. Create a dedicated service account and private key 5. from azure security center, add cloud connectors.

DRAG DROP - You create a new Azure subscription and start collecting logs for Azure Monitor. You need to configure Azure Security Center to detect possible threats related to sign-ins from suspicious IP addresses to Azure virtual machines. The solution must validate the configuration. Which three actions should you perform in a sequence? To answer, move the appropriate actions from the list of action to the answer area and arrange them in the correct order. Select and Place:

1. enable Azure Defender for the Subscription 2. copy an executable file on the a virtual mahcine and rename the file as ASC_Alerttest_772jfi039n.exe 3.run the executable file and specify the appropriate arguments

HOTSPOT - You have a Microsoft 365 subscription that uses Microsoft 365 Defender and contains a user named User1. You are notified that the account of User1 is compromised. You need to review the alerts triggered on the devices to which User1 signed in. How should you complete the query? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: Device info |where loggeedonusers contains 'user1' |distinct deviceid | "whats goes here" kind=inner alertevidence on deviceid | project alertid | join alertinfo on alertid | "what goes here" aelrtid, timestamp, title, serverity, category

1. join 2. project

You have a Microsoft 365 E5 subscription. You plan to perform cross-domain investigations by using Microsoft 365 Defender. You need to create an advanced hunting query to identify devices affected by a malicious email attachment. How should you complete the query? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

1. join 2. project 3. project

DRAG DROP - Your company deploys Azure Sentinel. You plan to delegate the administration of Azure Sentinel to various groups. You need to delegate the following tasks: ✑ Create and run playbooks ✑ Create workbooks and analytic rules. The solution must use the principle of least privilege. Which role should you assign for each task? To answer, drag the appropriate roles to the correct tasks. Each role may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place: create and run playbooks: ? create workbooks and analytics rules: ?

1. logic app contributor 2. Azure Sentinel contributor

You have an Azure subscription that has Azure Defender enabled for all supported resource types. You create an Azure logic app named LA1. You plan to use LA1 to automatically remediate security risks detected in Azure Security Center. You need to test LA1 in Security Center. What should you do? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: what would you give the following? set the LA1 trigger to? Trigger the execution of LA1 from?

1. when an azure security center recommendation is created or triggered. 2. security alerts.

You are configuring Microsoft Cloud App Security. You have a custom threat detection policy based on the IP address ranges of your company's United States-based offices. You receive many alerts related to impossible travel and sign-ins from risky IP addresses. You determine that 99% of the alerts are legitimate sign-ins from your corporate offices. You need to prevent alerts for legitimate sign-ins from known locations. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Configure automatic data enrichment. D. Add the IP addresses to the other address range category and add a tag.

You have the following environment: Azure Sentinel - ✑ A Microsoft 365 subscription ✑ Microsoft Defender for Identity ✑ An Azure Active Directory (Azure AD) tenant You configure Azure Sentinel to collect security logs from all the Active Directory member servers and domain controllers. You deploy Microsoft Defender for Identity by using standalone sensors. You need to ensure that you can detect when sensitive groups are modified in Active Directory. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Configure the Advanced Audit Policy Configuration settings for the domain controllers. D. Configure Windows Event Forwarding on the domain controllers.

You have the following advanced hunting query in Microsoft 365 Defender. DeviceProcessEvents | where Timestamp > ago (24h) //Pivoting for rundll32 | where InitiatingProcessFileName =~ 'rundll32.exe' //Looking for empty command line and InitiatingProcessCommandLine !contains " " and InitiatingProcessCommandLine != "" //Looking for schtasks.exe as the created process and FileName in~ ('schtasks.exe') //Disabling system restore and ProcessCommandLine has 'Change' and ProcessCommandLine has 'SystemRestore' and ProcessCommandLine has 'disable' You need to receive an alert when any process disables System Restore on a device managed by Microsoft Defender during the last 24 hours. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Create a detection rule. E. Add DeviceId and ReportId to the output of the query

You use Azure Sentinel. You need to receive an alert in near real-time whenever Azure Storage account keys are enumerated. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Create a livestream D. Create a hunting query.

You have an Azure subscription named Sub1 and a Microsoft 365 subscription. Sub1 is linked to an Azure Active Directory (Azure AD) tenant named contoso.com. You create an Azure Sentinel workspace named workspace1. In workspace1, you activate an Azure AD connector for contoso.com and an Office 365 connector for the Microsoft 365 subscription. You need to use the Fusion rule to detect multi-staged attacks that include suspicious sign-ins to contoso.com followed by anomalous Microsoft Office 365 activity. Which two actions should you perform? Each correct answer present part of the solution. NOTE: Each correct selection is worth one point

A. Create custom rule based on the Office 365 connector templates. B. Create a Microsoft incident creation rule based on Azure Security Center

You use Azure Defender. You have an Azure Storage account that contains sensitive information. You need to run a PowerShell script if someone accesses the storage account from a suspicious IP address. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. From Azure Security Center, enable workflow automation. C. Create an Azure logic app that has an Azure Security Center alert trigger.

You create an Azure subscription named sub1. In sub1, you create a Log Analytics workspace named workspace1. You enable Azure Security Center and configure Security Center to use workspace1. You need to collect security event logs from the Azure virtual machines that report to workspace1. What should you do?

A. From Security Center, enable data collection

You create an Azure subscription. You enable Azure Defender for the subscription. You need to use Azure Defender to protect on-premises computers. What should you do on the on-premises computers?

A. Install the Log Analytics agent

You are responsible for responding to Azure Defender for Key Vault alerts. During an investigation of an alert, you discover unauthorized attempts to access a key vault from a Tor exit node. What should you configure to mitigate the threat?

A. Key Vault firewalls and virtual networks

You create a custom analytics rule to detect threats in Azure Sentinel. You discover that the rule fails intermittently. What are two possible causes of the failures? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. The rule query takes too long to run and times out. D. There are connectivity issues between the data sources and Log Analytics

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are configuring Azure Sentinel. You need to create an incident in Azure Sentinel when a sign-in to an Azure virtual machine from a malicious IP address is detected. Solution: You create a Microsoft incident creation rule for a data connector. Does this meet the goal?

A. Yes

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are configuring Microsoft Defender for Identity integration with Active Directory. From the Microsoft Defender for identity portal, you need to configure several accounts for attackers to exploit. Solution: From Entity tags, you add the accounts as Honeytoken accounts. Does this meet the goal?

A. Yes

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You use Azure Security Center. You receive a security alert in Security Center. You need to view recommendations to resolve the alert in Security Center. Solution: From Security alerts, you select the alert, select Take Action, and then expand the Mitigate the threat section. Does this meet the goal?

A. Yes

You provision a Linux virtual machine in a new Azure subscription. You enable Azure Defender and onboard the virtual machine to Azure Defender. You need to verify that an attack on the virtual machine triggers an alert in Azure Defender. Which two Bash commands should you run on the virtual machine? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. cp /bin/echo ./asc_alerttest_662jfi039n D. ./asc_alerttest_662jfi039n testing eicar pipe

You need to visualize Azure Sentinel data and enrich the data by using third-party data sources to identify indicators of compromise (IoC). What should you use?

A. notebooks in Azure Sentinel

You use Azure Security Center. You receive a security alert in Security Center. You need to view recommendations to resolve the alert in Security Center. What should you do?

B. From Security alerts, select Take Action, and then expand the Mitigate the threat section.

You have a Microsoft 365 tenant that uses Microsoft Exchange Online and Microsoft Defender for Office 365. What should you use to identify whether zero-hour auto purge (ZAP) moved an email message from the mailbox of a user?

A. the Threat Protection Status report in Microsoft Defender for Office 365

A security administrator receives email alerts from Azure Defender for activities such as potential malware uploaded to a storage account and potential successful brute force attacks. The security administrator does NOT receive email alerts for activities such as antimalware action failed and suspicious network activity. The alerts appear in Azure Security Center. You need to ensure that the security administrator receives email alerts for all the activities. What should you configure in the Security Center settings?

A. the severity level of email notifications

You need to receive a security alert when a user attempts to sign in from a location that was never used by the other users in your organization to sign in. Which anomaly detection policy should you use?

Activity from infrequent country

You have a Microsoft 365 subscription that uses Microsoft Defender for Office 365. You have Microsoft SharePoint Online sites that contain sensitive documents. The documents contain customer account numbers that each consists of 32 alphanumeric characters. You need to create a data loss prevention (DLP) policy to protect the sensitive documents. What should you use to detect which documents are sensitive?

Azure Information Protection

You have an existing Azure logic app that is used to block Azure Active Directory (Azure AD) users. The logic app is triggered manually. You deploy Azure Sentinel. You need to use the existing logic app as a playbook in Azure Sentinel. What should you do first?

B. Add a data connector to Azure Sentinel.

You recently deployed Azure Sentinel. You discover that the default Fusion rule does not generate any alerts. You verify that the rule is enabled. You need to ensure that the Fusion rule can generate alerts. What should you do?

B. Add data connectors

You are configuring Azure Sentinel. You need to send a Microsoft Teams message to a channel whenever an incident representing a sign-in risk event is activated in Azure Sentinel. Which two actions should you perform in Azure Sentinel? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

B. Associate a playbook to the analytics rule that triggered the incident. D. Add a playbook.

Question #20 Topic 2 You have a suppression rule in Azure Security Center for 10 virtual machines that are used for testing. The virtual machines run Windows Server. You are troubleshooting an issue on the virtual machines. In Security Center, you need to view the alerts generated by the virtual machines during the last five days. What should you do?

B. Change the state of the suppression rule to Disabled.

You have a third-party security information and event management (SIEM) solution. You need to ensure that the SIEM solution can generate alerts for Azure Active Directory (Azure AD) sign-events in near real time. What should you do to route events to the SIEM solution?

B. Configure the Diagnostics settings in Azure AD to stream to an event hub.

Question #8 Topic 3 Your company stores the data of every project in a different Azure subscription. All the subscriptions use the same Azure Active Directory (Azure AD) tenant. Every project consists of multiple Azure virtual machines that run Windows Server. The Windows events of the virtual machines are stored in a Log Analytics workspace in each machine's respective subscription. You deploy Azure Sentinel to a new Azure subscription. You need to perform hunting queries in Azure Sentinel to search across all the Log Analytics workspaces of all the subscriptions. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

B. Create a query that uses the workspace expression and the union operator. E. Add the Azure Sentinel solution to each workspace.

You receive an alert from Azure Defender for Key Vault. You discover that the alert is generated from multiple suspicious IP addresses. You need to reduce the potential of Key Vault secrets being leaked while you investigate the issue. The solution must be implemented as soon as possible and must minimize the impact on legitimate users. What should you do first?

B. Enable the Key Vault firewall.

Your company uses Microsoft Defender for Endpoint. The company has Microsoft Word documents that contain macros. The documents are used frequently on the devices of the company's accounting team. You need to hide false positive in the Alerts queue, while maintaining the existing security posture. Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

B. Hide the alert. D. Create a suppression rule scoped to a device group. E. Generate the alert.

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are configuring Azure Sentinel. You need to create an incident in Azure Sentinel when a sign-in to an Azure virtual machine from a malicious IP address is detected. Solution: You create a livestream from a query. Does this meet the goal?

B. No

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are configuring Azure Sentinel. You need to create an incident in Azure Sentinel when a sign-in to an Azure virtual machine from a malicious IP address is detected. Solution: You create a scheduled query rule for a data connector. Does this meet the goal?

B. No

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are configuring Microsoft Defender for Identity integration with Active Directory. From the Microsoft Defender for identity portal, you need to configure several accounts for attackers to exploit. Solution: From Azure AD Identity Protection, you configure the sign-in risk policy. Does this meet the goal?

B. No

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are configuring Microsoft Defender for Identity integration with Active Directory. From the Microsoft Defender for identity portal, you need to configure several accounts for attackers to exploit. Solution: You add each account as a Sensitive account. Does this meet the goal?

B. No

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are configuring Microsoft Defender for Identity integration with Active Directory. From the Microsoft Defender for identity portal, you need to configure several accounts for attackers to exploit. Solution: You add the accounts to an Active Directory group and add the group as a Sensitive group. Does this meet the goal?

B. No

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have Linux virtual machines on Amazon Web Services (AWS). You deploy Azure Defender and enable auto-provisioning. You need to monitor the virtual machines by using Azure Defender. Solution: You manually install the Log Analytics agent on the virtual machines. Does this meet the goal?

B. No

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You use Azure Security Center. You receive a security alert in Security Center. You need to view recommendations to resolve the alert in Security Center. Solution: From Security alerts, you select the alert, select Take Action, and then expand the Prevent future attacks section. Does this meet the goal?

B. No

Question #10 Topic 2 Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You use Azure Security Center. You receive a security alert in Security Center. You need to view recommendations to resolve the alert in Security Center. Solution: From Regulatory compliance, you download the report. Does this meet the goal?

B. No

You have a Microsoft 365 subscription that contains 1,000 Windows 10 devices. The devices have Microsoft Office 365 installed. You need to mitigate the following device threats: ✑ Microsoft Excel macros that download scripts from untrusted websites ✑ Users that open executable attachments in Microsoft Outlook ✑ Outlook rules and forms exploits What should you use?

B. attack surface reduction rules in Microsoft Defender for Endpoint

Your company uses Azure Sentinel to manage alerts from more than 10,000 IoT devices. A security manager at the company reports that tracking security threats is increasingly difficult due to the large number of incidents. You need to recommend a solution to provide a custom visualization to simplify the investigation of threats and to infer threats by using machine learning. What should you include in the recommendation?

B. notebooks

Your company deploys the following services: ✑ Microsoft Defender for Identity ✑ Microsoft Defender for Endpoint ✑ Microsoft Defender for Office 365 You need to provide a security analyst with the ability to use the Microsoft 365 security center. The analyst must be able to approve and reject pending actions generated by Microsoft Defender for Endpoint. The solution must use the principle of least privilege. Which two roles should assign to the analyst? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

B. the Active remediation actions role in Microsoft Defender for Endpoint D. the Security Reader role in Azure Active Directory (Azure AD)

You have an Azure subscription that has Azure Defender enabled for all supported resource types. You need to configure the continuous export of high-severity alerts to enable their retrieval from a third-party security information and event management (SIEM) solution. To which service should you export the alerts?

C. Azure Event Hubs

You have an Azure subscription that uses Microsoft Sentinel. You need to minimize the administrative effort required to respond to the incidents and remediate the security threats detected by Microsoft Sentinel. Which two features should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

C. Microsoft Sentinel automation rules D. Microsoft Sentinel playbooks

You have an Azure subscription that contains a virtual machine named VM1 and uses Azure Defender. Azure Defender has automatic provisioning enabled. You need to create a custom alert suppression rule that will supress false positive alerts for suspicious use of PowerShell on VM1. What should you do first?

C. On VM1 trigger a PowerShell alert.

You create a hunting query in Azure Sentinel. You need to receive a notification in the Azure portal as soon as the hunting query detects a match on the query. The solution must minimize effort. What should you use?

C. a livestream

You plan to create a custom Azure Sentinel query that will provide a visual representation of the security alerts generated by Azure Security Center. You need to create a query that will be used to display a bar graph. What should you include in the query?

C. count

You have a Microsoft Sentinel workspace named workspace1 that contains custom Kusto queries. You need to create a Python-based Jupyter notebook that will create visuals. The visuals will display the results of the queries and be pinned to a dashboard. The solution must minimize development effort. What should you use to create the visuals?

C. msticpy

Question #4 Topic 2 You have a Microsoft 365 subscription that uses Azure Defender. You have 100 virtual machines in a resource group named RG1. You assign the Security Admin roles to a new user named SecAdmin1. You need to ensure that SecAdmin1 can apply quick fixes to the virtual machines by using Azure Defender. The solution must use the principle of least privilege. Which role should you assign to SecAdmin1?

C. the Contributor role for RG1

DRAG DROP - You are informed of a new common vulnerabilities and exposures (CVE) vulnerability that affects your environment. You need to use Microsoft Defender Security Center to request remediation from the team responsible for the affected systems if there is a documented active exploit available. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Correct answer is as shown. Open Security.microsoft.com --> Enpoints --> Vulnerabilty Management --> Weakness Search/select CVE and click "Go to related security recommendations" Click on Security recommendation task i.e. "update putty to version x.x.x" Click on Request Remediation.

You have a custom analytics rule to detect threats in Azure Sentinel. You discover that the analytics rule stopped running. The rule was disabled, and the rule name has a prefix of AUTO DISABLED. What is a possible cause of the issue?

D. Permissions to one of the data sources of the rule query were modified.

DRAG DROP - You have an Azure subscription. You need to delegate permissions to meet the following requirements: ✑ Enable and disable Azure Defender. ✑ Apply security recommendations to resource. The solution must use the principle of least privilege. Which Azure Security Center role should you use for each requirement? To answer, drag the appropriate roles to the correct requirements. Each role may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place: Enable and disable Azure Defender Apply security recommendations to a resource

Enable and disable Azure Defender: Security Admin Apply security recommendations to a resource: subscription contributor

HOTSPOT - You are informed of an increase in malicious email being received by users. You need to create an advanced hunting query in Microsoft 365 Defender to identify whether the accounts of the email recipients were compromised. The query must return the most recent 20 sign-ins performed by the recipients within an hour of receiving the known malicious email. How should you complete the query? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

HOTSPOT - You are informed of an increase in malicious email being received by users. You need to create an advanced hunting query in Microsoft 365 Defender to identify whether the accounts of the email recipients were compromised. The query must return the most recent 20 sign-ins performed by the recipients within an hour of receiving the known malicious email. How should you complete the query? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

DRAG DROP - You have an Azure Sentinel deployment. You need to query for all suspicious credential access activities. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Microsoft Sentinel -> Hunting -> Add filter "Tactics", select "Credential Access" -> Run All Queries

HOTSPOT - You deploy Azure Sentinel. You need to implement connectors in Azure Sentinel to monitor Microsoft Teams and Linux virtual machines in Azure. The solution must minimize administrative effort. Which data connector type should you use for each workload? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: Microsoft teams: ? Linux virtual machines in Azure: ?

Microsoft teams: office 365 Linux virtual machines in Azure: syslog

HOTSPOT - You have an Azure subscription that uses Azure Defender. You plan to use Azure Security Center workflow automation to respond to Azure Defender threat alerts. You need to create an Azure policy that will perform threat remediation automatically. What should you include in the solution? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

Set available effects to: Deployifnotexist To perform remediation use: An Azure Logic apps app that has the trigger set to when an azure security center alert is created or triggered

DRAG DROP - You have an Azure subscription. The subscription contains 10 virtual machines that are onboarded to Microsoft Defender for Cloud. You need to ensure that when Defender for Cloud detects digital currency mining behavior on a virtual machine, you receive an email notification. The solution must generate a test email. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Step 1: From Logic App Designer, create a logic app. Create a logic app and define when it should automatically run 1. From Defender for Cloud's sidebar, select Workflow automation. 2. To define a new workflow, click Add workflow automation. The options pane for your new automation opens. Here you can enter: A name and description for the automation. The triggers that will initiate this automatic workflow. For example, you might want your Logic App to run when a security alert that contains "SQL" is generated. The Logic App that will run when your trigger conditions are met. 3. From the Actions section, select visit the Logic Apps page to begin the Logic App creation process. 4. Etc. Step 2: From Logic App Designer, run a trigger. Manually trigger a Logic App - You can also run Logic Apps manually when viewing any security alert or recommendation. Step 3: From Workflow automation in Defender for cloud, add a workflow automation. Configure workflow automation at scale using the supplied policies Automating your organization's monitoring and incident response processes can greatly improve the time it takes to investigate and mitigate security incidents

You plan to create a custom Azure Sentinel query that will track anomalous Azure Active Directory (Azure AD) sign-in activity and present the activity as a time chart aggregated by day. You need to create a query that will be used to display the time chart. What should you include in the query?

bin

You provision Azure Sentinel for a new Azure subscription. You are configuring the Security Events connector. While creating a new rule from a template in the connector, you decide to generate a new alert for every event. You create the following rule query. let timeframe = 1d; securityevent |where timegenerated >= ago(timeframe) |where eventID == 1102 and eventsourcename == "Microsoft-Windows-eventlog" |summarize starttimeutc = min(timegenerated), endtimeutc = max(timegenerated), EventCount = count() by computer, account, eventID, activity |extend timestamps = starttimeutc, accountcustomentity = account, hostcustomentity = computer By which two components can you group alerts into incidents? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

a. user d. computer

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have Linux virtual machines on Amazon Web Services (AWS). You deploy Azure Defender and enable auto-provisioning. You need to monitor the virtual machines by using Azure Defender. Solution: You enable Azure Arc and onboard the virtual machines to Azure Arc. Does this meet the goal?

a. yes

You need to prevent duplicate events from occurring in SW1. What should you use for each action? To answer, drag the appropriate resources to the correct actions. Each resource may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place: resources below SW1: an azure sentinel workspace CEF1 : a linux server configured to forward common event format (CEF) logs to SW1 server1: A linux server configured to send common event format (CEF) logs to CEF 1 server 2: A linux server configured to send syslog logs to CEF 1

correct answer is Server1 and CEF1 for server1 : If you plan to use this log forwarder machine to forward Syslog messages as CEF, then to avoid the duplication of events to the Syslog and CommonSecurityLog tables: On each source machine that sends logs to the forwarder in CEF format, you must edit the Syslog configuration file to remove the facilities used to send CEF messages. For CEF1: Install the Log Analytics agent for Linux (also known as the OMS agent) and configures it for the following purposes: • Listening for CEF messages from the built-in Linux Syslog daemon on TCP port 25226 Configures the built-in Linux Syslog daemon for the following purposes: • Listening for Syslog messages from your security solutions on TCP port 514 • Forwarding only the messages it identifies as CEF to the Log Analytics agent on localhost using TCP port 25226

You have a Microsoft 365 subscription that uses Microsoft 365 Defender. You need to identify all the entities affected by an incident. Which tab should you use in the Microsoft 365 Defender portal?

evidence and response

You have an Azure Sentinel workspace. You need to test a playbook manually in the Azure portal. From where can you run the test in Azure Sentinel?

incidents

You have a Microsoft 365 E5 subscription that uses Microsoft SharePoint Online. You delete users from the subscription. You need to be notified if the deleted users downloaded numerous documents from SharePoint Online sites during the month before their accounts were deleted. What should you use?

insider risk policy

HOTSPOT - You need to use an Azure Resource Manager template to create a workflow automation that will trigger an automatic remediation when specific security alerts are received by Azure Security Center. How should you complete the portion of the template that will provision the required Azure resources? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

look at the picture for answer

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are configuring Azure Sentinel. You need to create an incident in Azure Sentinel when a sign-in to an Azure virtual machine from a malicious IP address is detected. Solution: You create a hunting bookmark. Does this meet the goal?

no

HOTSPOT - You purchase a Microsoft 365 subscription. You plan to configure Microsoft Cloud App Security. You need to create a custom template-based policy that detects connections to Microsoft 365 apps that originate from a botnet network. What should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

policy template type: activity policy Filter based on: IP address tag

HOTSPOT - You need to create a query for a workbook. The query must meet the following requirements: ✑ List all incidents by incident number. ✑ Only include the most recent log for each incident. How should you complete the query? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area: securityincident | [answer here] [answer here] (lastmodifiedtime, *) by incident number

securityincident | summarize arg_max (lastmodifiedtime, *) by incident number

HOTSPOT - You have a Microsoft 365 E5 subscription that uses Microsoft Defender and an Azure subscription that uses Azure Sentinel. You need to identify all the devices that contain files in emails sent by a known malicious email sender. The query will be based on the match of the SHA256 hash. How should you complete the query? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:

sha256 and sha256

DRAG DROP - You have an Azure subscription linked to an Azure Active Directory (Azure AD) tenant. The tenant contains two users named User1 and User2. You plan to deploy Azure Defender. You need to enable User1 and User2 to perform tasks at the subscription level as shown in the following table. user1 needs: assign initiatives edit security policies enable automatic provisioning User2 needs: view alerts and recommendations apply security recommendations dismiss alerts The solution must use the principle of least privilege. Which role should you assign to each user? To answer, drag the appropriate roles to the correct users. Each role may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. Select and Place:

user 1: owner user 2: contributor