Power tools

Crosscutting with a table involves cutting the wood

specific length

Never use a circular saw that does not have an upper blade guard because the.

top guard protects you from flying objects

Before replacing parts such as bits, trigger lock blades, or discs of any tool, it is important to

turn it off

The adjustable tool reset on a bench grinder should be positioned

1/8" between the tool rest and the wheel

When using an appropriate bit, variable speed drills can be ised like a (n)

Screwdriver

Most craftworkers who use pneumatic nailers operate their compressors at

70 to 120 pounds

A type of grinder accessory that can be used to provide a stable surface for flexible sanding discs or buffing pads or rest against is called a(n)

Backing pad

The grinder type best suited to sharpinning worn edges on a cutting tool is the

Bench grinder

The part of a drill that holds the drill bit in place is called the

Chunck

A power mitter saw combines a miter box with a circular

Circular saw

When using a grinder, the operator should wear?

Face shield and safety glasses

Before using a hammer drill or rotary hammer to drill into concrete, it is important to

Follow the silica standards

A porta-power is an example of a(n)

Hydraulic tool

A pneumatic drill is commonly used

No source of electricity is available

A compact tool operated by moving attachments back and forth at very high speeds is the

Oscillating multi-tools

The coarseness of a band-saw's blade is rated in

TPI

When using power tools, NEVER engage the

Trigger lock

Compared with power-actuated nailers, electric and pneumatic nailers

don't need certification

An angle grinder is used to grind

heavy/ hard materials

Saws with fine blades that are excellent for delicate and intricate cutting are called

jigsaws

When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's

kerf

The most important maintenance on a circular saw involves the

lower blade guard

Before connecting any power tool to a power source, it is critical to make sure the switch is

off

A low-velocity fastening system that is used to drive steel pins or threaded studs into masonry and steel is a(n)

power actuated tool

Before using a pneumatically powered nailer for the first time, it is important to

read instructions