Power tools
Crosscutting with a table involves cutting the wood
specific length
Never use a circular saw that does not have an upper blade guard because the.
top guard protects you from flying objects
Before replacing parts such as bits, trigger lock blades, or discs of any tool, it is important to
turn it off
The adjustable tool reset on a bench grinder should be positioned
1/8" between the tool rest and the wheel
When using an appropriate bit, variable speed drills can be ised like a (n)
Screwdriver
Most craftworkers who use pneumatic nailers operate their compressors at
70 to 120 pounds
A type of grinder accessory that can be used to provide a stable surface for flexible sanding discs or buffing pads or rest against is called a(n)
Backing pad
The grinder type best suited to sharpinning worn edges on a cutting tool is the
Bench grinder
The part of a drill that holds the drill bit in place is called the
Chunck
A power mitter saw combines a miter box with a circular
Circular saw
When using a grinder, the operator should wear?
Face shield and safety glasses
Before using a hammer drill or rotary hammer to drill into concrete, it is important to
Follow the silica standards
A porta-power is an example of a(n)
Hydraulic tool
A pneumatic drill is commonly used
No source of electricity is available
A compact tool operated by moving attachments back and forth at very high speeds is the
Oscillating multi-tools
The coarseness of a band-saw's blade is rated in
TPI
When using power tools, NEVER engage the
Trigger lock
Compared with power-actuated nailers, electric and pneumatic nailers
don't need certification
An angle grinder is used to grind
heavy/ hard materials
Saws with fine blades that are excellent for delicate and intricate cutting are called
jigsaws
When using a circular saw, be sure to cut on the waste side of the cut mark to allow for the blade's
kerf
The most important maintenance on a circular saw involves the
lower blade guard
Before connecting any power tool to a power source, it is critical to make sure the switch is
off
A low-velocity fastening system that is used to drive steel pins or threaded studs into masonry and steel is a(n)
power actuated tool
Before using a pneumatically powered nailer for the first time, it is important to
read instructions