Wood Shop

when a machine is being used only ____ person may be in the safety zone

1

Pedistal Sander-can both the belt and the disc can be used at the same time ?

No

What operations can be performed free hand ?

None

the miter saw is __________to cut board that or stacked or lying side by side

Not Able

the disc spins counterclockwise requiring the _________ side to be used

left

used for pounding a chisel, usually made of wood, metal or rubber

mallet

what machine is used for crosscutting

miter saw

what machine would you use if you wanted to crosscut something at an angle

miter saw

can you plane two boards at the same time ?

no

Stock should be placed ________________ during operation

on the table

what machine will help shape a project with gentle pressure and can also smooth curved cuts

pedistal sander

is used to screw in screw that have a plus sign in the head of the screw

phillips screwdriver

what machine is used to reduce the thickness of a board

planner

cuts wooden plugs to cover the head of a screw

plug cutter

used for cutting with grain of a piece of wood

rip saw

what machine is used to create decorative edges

router

what should always be your number one priority

saftey

used to create an indention on a spot before drilling holes

scratch awl

A tool that is used to layout angles of various degree

sliding t bevel

used to make measurements and to mark straight lines.

steel rule

before starting the sander, make sure that the ________ and ___________ are secure

table and sand paper

what machine would you use if you wanted to rip a board

table saw

primarily used to measure long distances

tape measure

Drill bits should be inserted in the chuck how far ?

to the blade

Where should you stand while operating a planer

to the right

Table Saw-When not in use, where the push stick should be kept____

to the right within reach

Band Saw-in relation to the blade hand should ____________ of the blade

to the sides

marks lines perpendicular to the edge of the piece of the wood

try square

a bit that drills mainly small holes

twist bit

Make sure that the___ is securely fastened in the ___

BIt and Chuck

used to cut both with and against the grain. it is also used with a miter box to cut angles

Back Saw

what machine allows you to cut circles or arcs

Band saw

Table Saw-when ripping a board, the push stick should be placed on the board between the___ and the ___

Fence and Blade

Band saw-Adjust the blade guard sleeve so there is no more then _____of a clearance

1/4

the blade should be kept no higher then ___ of an inch above the stock

1/4

once depth cut is a set and 1st pass is made through the planner, turn the hand wheel ______ for maximum depth of cut for next path

1/4 of a turn

Board must be ______ inches to be sent through a planer

12 inches

How far from any cutting surface should fingers be kept?

6 inches

Machines should never be started when ___ is touching a ____

Board/Anything is touching a blade

what regulates the width of a cut____

Fence

When using the table saw, you should always use what three things?

Push stick-push's the board through Fence- to help keep the board straight Guard-places a barrier from you and the blade

Always_________ the chuck key before starting the drill press

Remove

Router-When routing/shaping, the direction of feed should always be ___ to ___

Right to Left

Before machines can be turned on , all students must put on______

Safety glasses

Table Saw-what should be used when crosscutting on the table saw

Sled or miter guage

Small scraps should be cleared while the blade is _______

Stoped

Miter Saw-Stock should be firmly placed on the __________ and against the _________________

Table and Fence

Router-make sure the stock is placed on the __ and against the ____ before routing

Table and Fence

When working with small pieces a ___ should be used

clamp

as the bit starts to exit the stock it will try to spin, a _____________ will prevent this from happening

clamp

used to hammer in and remove nails

claw hammer

similar to the try square but it can be adjusted and mark 45 and 90 degree angles

combination square

used for cutting curves and for scroll work

coping saw

a bit that cuts a tapered end to an existing holes to receive a flat head screw

counter sink

used to cut across the grain of a piece of wood

crosscut saw

_______turn the blade tension wheel

do not

what machine allows you to bore holes

drill press

used to screw in screws that have slotted head

flat head screwdriver

Drill Press-Adjust the table so the bit will___________the center of the table

go threw