2-1 test@

20. Workers working outdoors should become familiar with poisonous plants: ? from these plants is toxic and can remain toxic on surfaces for extended periods of time. a. a spore b. the oil C. the pollen d. the leaves

B. Oils

2. The letters NJATC when referring to the electrical industry stand for ?. a. National Joint Apprenticeship and Training Committee b. National Journeyman and Apprenticeship Technical Curriculum c. National Jourmeymen and Apprenticeship Training Committee d. National Jourmeymen and Apprenticeship Training Council

C. National joint and apprenticeship and training committee

13. Local union By-Laws and rules in conflict with the______? Are null and void. a. IBEW Constituion b. International executive council policy c. local union district policy d. local union members mandate

a. IBEW Constituion

19. According lesson, there is a direct to the reference material in this correlation between ? and absenteeism. a. attitude b. being overworked c. physical working conditions d. worker wages

a. attitude

3. A national curriculum was introduced to the Outside Line program in ?. a. 1941 b. 1956 c. 1965 d. 1970

b. 1956

1. In 1941, the NJATC held its first meeting with _____ ? representatives appointed by both the IBEW and NECA. a. 3 b. 6 c. 9. d. 12

b. 6

8. What is the maximum amount that a member may be allowed to speak on the floor of a meeting (excluding the process of giving a report) ?. a. 3 minutes b. 7 minutes c. 10 minutes d. 15 minutes

b. 7 minutes

7. According to the IBEW constitution, an apprentice who has worked _____ ? in the jurisdiction of a local union shall be admitted into the IBEW through the local union with further action. a. I month b. 3 months C. 6 months d. 12 months

d. 12 months

38. At what degree on a sine wave is the voltage at the maximum NEGATIVE value? a. 45° b. 90° c. 180° d. 270'

d. 270

43. A delta connected device draws 200 amp through each of the windings. The current through each of the lines is ?. a. 127 A b. 141 A c. 283 A d. 346 A

d. 346 A

40. If the peak value of an AC voltage is eight kilovolts, the average value is ?. a. 4.43 kV b. 4.16 kV C. 5.09 kV d. 5.65 kV

d. 5.65kV

44. If the voltage across a winding of a wy connected device is 480 volts, the line- voltage would be ______ ? a. 220 V b. 277 V C. 480 V d. 830 V

d. 830 V

26. Your employer is mandated by OSHA to train you under their EAP, ______?. a. when the EAP is first developed or changed. b. when the job responsibilities change. C. you first start your job. d. all the above

d. All the above

11. The duties of the local union Executive Board are outlined in the _____?. a. Department of Labor Federal Regulations b. IBEW Constitution C. Local Union By-Laws d. Both b. and c.

d. Both b. and c.

12. The local union Trial Board is comprised by the ?. a. Business Manager and four appointed members in good standing b. Business Manager and six appointed members in good standing c. Examining Board Members d. Executive Board Members

d. Executive Board Members

14. In order to become a true professional in linework. you should a. analyze your job-related activities see if you are doing enough b. attain more education, even if it's field like computer technology C. observe all workers even those who are not very successful d. learn how your abilities fit into the future of the electrical industiry

d. Learn how your abilties fit into the future of the electrical industiry

33. What is the total total current in a DC series circuit that has a total voltage of 240 volts and a total resistance of 16 ohms? a. 0.067 A b. 15 A c. 256 A d. 3,840 A

B. 15 A

36. When a waveform has gone through 60 cycles in one second, the frequency is ?. a. 1 Hz b. 60 Hz c. 180 Hz d. 360 Hz

B. 60 Hz

4. A minimum of ______ ? Members is required to form a new local union. a. 10 b. 25 c. 33 d. 40

a. 10

48. How many poles are required for a generator to have a frequency of 60 hertz at 3,600 rpm? a. 2 b. 4 c. 6 d. 8

a. 2

34. A circuit has five 2.2 kilohm resistors connected in parallel. The total resistance of the circuit is ? a. 440 ohms b. 1.100 ohms c. 4,400 ohms d. 11,000 ohms

a. 440 ohms

17. A personal practice that is usually addressed through progressively stricter disciplinar measures that can result the termination of the individual's employment is ________ ?. a. absentecism b. cell phone use C. consumption of alcohol d. poor personal hygiene

a. Absentecism

46. The 2 of a DC generator is/are made of carbon-based material that can withstand temperatures and reduce wear on the. A. Brushes b. Shaft c. Slip rings d. Stator

a. Brushes

42. Polarity is used to indicate the______? a. Affect the total power output. b. Direction in which a current with a circuit d. Rate of propagation to the spot light d. Time it take to develop a wave

a. Direction in which a current with a circuit

25. When referring to OSHA regulations, the acronym EAP refers to an ?. a. Emergency Action plan b. Energy Action Plan c. Energy Action Program d. Enctgy Audit Program

a. Emergency action plan

28. According to the 1910.269 standard, while work is being performed in a manhole containing energized electric equipment, a(n) _______? Shall be available on the surface in the immediate vicinity to render emergency assistance. a. Employee with first aid and CPR training b. Forman and other supervisor c. Safety and health representatvie d. Site or company safety director

a. Employee with first aid and CPR training

21. A person can go into shock from what many people consider a minor injury. You should treat a person in shock by ? a. applying an ice bag to the victim's head b. elevating the victim's feet 12-15 above their head C. having the victim lay flat d. keeping the victim awake by having them keep talking or making motions with their hands

b. Elevating the victim's feet 12-15 above their head.

24. Hazardous chemical spills are extremely dangerous; don't ever ____? a. clear potential hazards until all emergency response responders have arrived on the scene b. enter chemical emergency situation alone C. respond to contaminated or injured decontamination equipment workers until has arrived d. use the buddy system to enter a contaminated area, as both workers can be injured

b. Enter chemical emergency situation alone

30. If an employee is to be insulated from energized parts by the use of insulating gloves_______? Shall also be used. a. eye protection/face shield B. insulating sleeves c. live-line tools d. rubber gloves

b. Insulating sleeves

23. Your employer is required to develop an emergency action plan(s) for ______ ? a. Earthquakes b. Lockout tagout c. Severe weather conditions d. Tornadoes

b. Lockout tagout

49. When parallel, the ? connecting two 3-phase of the two machines must be alternators in equal. a. armature windings b. output voltages C. revolutions per minute d. total current output

b. Output voltages

31. Which of the following formualas expression of ohms laws for power. a. P=E/I B. P=ExI c. P=IR2 d. P=R/I2

b. P=ExI

10. What set of parliamentary rules for conducting meetings has been adopted by the IBEW Constitution? a. Hansard Parliamentary Rules of Order b. Robert's Rules of Order c. Royal Parliamentary Rules of Order d. U.S. House and Senate Rules of Order

b. Robert's Rules of Order

9. The person who is the absolute authority and is responsible for conducting business at a union meeting is referred to as the ?. a. business manager b. chair C. director d. president

b. chair

39. In an AC system, a sine wave can be used to represent both voltage and ? values. a. average b. Current c. effective d. resistance

b. current

32. Find the total resistance of the following circuit Given: E-4.160 4.500 A. R=6,500 V. R=1,000 a. 120 ohms b. 1,200 ohms c. 12,000 ohms d. 120,000 ohms

c. 12,000 ohms

41. If the effective value of an AC voltage volts, the root-mean-square (RMS), would be ______? a. 2,650 V b. 2,941 V c. 4,160 V d. 5,882 V

c. 4,160 V

50. An alternator has four poles and turns at 1,800 revolutions per minute. Using the formula, F= (Sx P), the frequency is ?. a. 30 Hz b. 50 Hz c. 60 Hz d. 100 Hz

c. 60 Hz

45. Maximum voltage is induced into a connection when it cuts the magnetic field at ?. a. 30° b. 45° c. 90 d. 120

c. 90

35. Each time the voltage reverses its ?, the current flow through the circuit changes direction. a. amplitude b. frequency c. polarity d. rotation

c. Polarity

29. According to OSHA 1910.269 for an employee to work lines or equipment de-energized, the lines or equipment shall be de-energized and ______?. a. insulated b. isolated c. properly grounded d. properly tagged/identified

c. Properly grounded

15. One way to improve your sense of professionalism is to ask to be given more _______? within your skill level. a. guidance b. homework c. responsibility d. training

c. Responsiblity

16. The greatest benefit of becoming a professiosal line worker is ?. a. ability to receive the highest pay and benefits in the industry b. knowing you will always be able to find a job C. Satisfaction from doing your job to the best of your ablity d. Understanding you are the best in the industry

c. Satisfaction from doing your job to the best of your ablity

5. The IBEW and NECA look for the electrical training ALLIANCE (NJATC) to provide excellence in training for the electrical industry. How is this accomplished? a. By developing tests that measure an apprentice's knowledge and progress b. By observing and adapting the best work practices from other craft training programs c. Through the coordination of all local training programs and curriculum distribution d. Through the creation of National Standards and a National Curriculum

c. Through the creation of National Standards and a National Curriculum

27. The difference between the 1910.269 standard and subpart V of the 1926 construction standard is that the subpart 1926 standard does not address ____? a. Construction of distribution system B. Construction of electric power transmission c. operation of electric power generation. d. operation and maintenance of nuclear power plants

d. Operation and maintenance of nuclear power plants

6. The receipts (money collected) of the IBEW are divided into the General Fund and the ? Fund. a. Education b. Health and Welfare c. Organizing d. Pension

d. Pension

37. The four forms of measurement of voltage and current associated with sine waves are average, peak, peak-to-peak, and _____? a. accumulative b. maximum c. minimum d. RMS

d. RMS

47. The two types of field windings-in generators are shunt and _____ ?. a. Lag b. Magnetic c. Round d. Series

d. Series

22. The best way to remove an attached tick by ____ ? a. Applying thick ouitment b. Burning it with a match c. Pouring rubbing alcohol on it d. Using tweezers, gently pull on it

d. Using tweezers, gently pull on it

five-year accident investigation study revealed that the two reasons given most often for accident were when superisors worked with people whose ablitities they were not sure of and _____? a. Faulty personal protective grounding equipment b. Improper powered equipment use/operators received improper or no training c. Not enough "tailboard" meetings d. When workers "assumed" the other workers knew how the crew work as a team

d. When workers "assumed" the other workers knew how the crew work as a team.