2 physics, Chapter 2 Physisc

Why should you specify a reference frame when describing motion?

A description of motion depends on the reference frame

Which of the following provides an example of one-dimensional motion in which average speed is not equal to the magnitude of average velocity? A boy rides a bicycle along a straight path from his house to the market. A pitcher throws a baseball along a perfectly straight line. A man throws a ball vertically upwards and catches it when it falls back. A girl walks 80m north, halts for a while, and walks 100m further north to reach home.

A man throws a ball vertically upwards and catches it when it falls back. The net displacement of the ball is zero. So the average velocity will be zero. But there has been distance traveled by the ball, so the average speed will not be zero.

A free-body diagram shows the forces acting on an object. How is that object represented in the diagram?

A single point

You are throwing a ball straight up in the air. Describe the ball's velocity and acceleration at the highest point.

At the highest point, acceleration is nonzero, but its velocity is zero.

A student is asked to solve the following problem: An object falls from a height for 2.0 s, at which point it is still 60 m above the ground. What will be the velocity of the object when it hits the ground? Which option provides the correct order of kinematic equations that can be used to solve the problem?

B

Identify some advantages of metric units.

Conversion between units is easier in metric units bc base 10

A steadily rolling ball is pushed in the direction from east to west, which causes the ball to move faster in the same direction. What is the direction of the acceleration?

East to west

Which forces cause the motion of a system?

External Forces

One object exerts a force of magnitude F1 on another object and experiences a force of magnitude F2 in return. What is true for F1 and F2?

F1=F2

Acceleration is calculated using velocity. True or False: Acceleration is a scalar quantity.

False

True or False: For a ball thrown straight up in the air, the magnitude of the average velocity, for any time interval, is always greater than the magnitude of its initial velocity.

False

What is a physical quantity that can be described by dynamics but not by kinematics?

Force

Is it possible to have a description of motion without a frame of reference?

No, because motion is relative. It is not possible to describe the motion of the body without a frame of reference. Motion is relative and is always described with respect to a chosen frame of reference.

Yes or no—Is it possible to determine a car's instantaneous velocity from just the speedometer reading?

No, it reflects speed but not the direction.

Can one-dimensional motion have zero distance but a nonzero displacement? What about zero displacement but a nonzero distance?

One-dimensional motion cannot have zero distance with nonzero displacement. Displacement has both magnitude and direction, but it can have zero displacement with nonzero distance because distance has only magnitude and any motion will be the distance it moves.

A hockey puck is shot down the arena in a straight line. Assume it does not slow until it is stopped by an opposing player who sends it back in the direction it came. The players are 20 m apart and it takes 1 s for the puck to go there and back. Which option describes the graph of the displacement over time? Consider the initial direction of the puck to be positive.

The graph is a downward opening V.

A car is moving on a straight road at a constant speed in a single direction. Which statement is true?

The magnitude of average velocity is equal to the average speed.

Three forces, A, B, and C, are acting on the same object with magnitudes a, b, and c, respectively. Force A acts to the right, force B acts to the left, and force C acts downward. What is a necessary condition for the object to move straight down?

The magnitude of force A must be equal to the magnitude of force B, so a = b.

True or False: Total distance traveled must be either equal to or greater than magnitude of total displacement.

True

A ball is dropped and hits the floor. What is the direction of the force exerted by the floor on the ball?

Upward

Two runners travel along the same straight path. They start at the same time, and they end at the same time, but at the halfway mark, they have different instantaneous velocities. Is it possible for them to have the same average velocity for the trip?

Yes, because average velocity depends on the net or total displacement. Instantaneous velocities might change, but they do not have a bearing on the average velocity as it is the net displacement divided by total time.

Boat A and boat B are traveling at a constant speed in opposite directions when they pass each other. Yes or no—If a person in each boat describes motion based on the boat's own reference frame, will the description by a person in boat A of boat B's motion be the same as the description by a person in boat B of boat A's motion?

Yes, both people will describe the same motion because they will perceive the other as moving in the backward direction.

A position vs. time graph of a frog swimming across a pond has two distinct straight-line sections. The slope of the first section is 1 m/s. The slope of the second section is 0 m/s. If each section lasts 1 s, then what is the frog's total average velocity?

0.5 m/s

A car travels with an average velocity of 23 m/s for 82 s. Which of the following could NOT have been the car's displacement?

1,900 m east

Rhianna and Logan start at the same point and walk due north. Rhianna walks with an average velocity Logan walks three times the distance in twice the time as Rhianna. Which option expresses Logan's average velocity in terms of vavg,R? Logans Average velocity = 1.5v Logans Average velocity = 2/3v Logans Average velocity = 3v Logans Average velocity = 1/2v

1.5v

An object has a mass of 1 kg on Earth. What is its weight on the moon?

1.67 N

A swimmer bounces straight up from a diving board and falls feet first into a pool. She starts with a velocity of 4.00 m/s and her takeoff point is 8 m above the pool. How long are her feet in the air?

1.75 s

A person pushes an object of mass 5.0 kg along the floor by applying a force. If the object experiences a friction force of 10 N and accelerates at 18 m/s2, what is the magnitude of the force exerted by the person?

100 N

During the same Olympics, Bolt also set the world record in the 200-m dash with a time of 19.30 s. Using the same assumptions as for the 100-m dash, what was his maximum speed for this race?

200m-(1.50s)v=(16.30s)v v=200m/(16.30s + 1.50s)=11.2 m/s

A girl rolls a basketball across a basketball court. The ball slowly decelerates at a rate of -0.20 m/s2. If the initial velocity was 2.0 m/s and the ball rolled to a stop at 5.0 s after 12:00 p.m., at what time did she start the ball rolling?

5 s before noon

Which of the following provides a correct answer for a problem that can be solved using the kinematic equations?

A body starts from rest and accelerates at 4m/s^2 for 2s. The body's final velocity is 8m/s. It is a kinematic problem. The final velocity of the body can be obtained by using the kinematic equations.

How can you use the definition of acceleration to explain the units in which acceleration is measured?

Acceleration is the rate of change of velocity. Therefore, its unit is meter per second squared (m/s^2).

What kind of motion would create a position graph like the one shown? - The graph shows increasing velocities from 0 s to 10 s, and from 10 s to 20 s. Increasing velocity is acceleration.

Any motion that accelerates

A cyclist rides 3km west and then turns around and rides 2km east. What is her displacement? What distance does she ride? What is the magnitude of her displacement?

Displacement is −1km, distance is 5km, and the magnitude of displacement is 1km1km. Displacement is defined as the shortest distance between the initial and final positions along with the direction, and distance is defined as the total path covered by the object.

What does your car's odometer record?

Distance

What is dynamics?

Dynamics is the study of forces and their effect on motion

Why is acceleration a vector quantity?

It is a vector quantity because it has magnitude as well as direction.

The tires you choose to drive over icy roads will create more friction with the road than your summer tires. Which option is another example where more friction is desirable?

Jogging track

Which statement best describes the relationship between instantaneous velocity and instantaneous speed?

Magnitude of instantaneous velocity is equal to instantaneous speed.

Which statement explains why a racecar going around a curve is accelerating, even if the speed is constant?

The car is accelerating because the direction of velocity if changing.

Which of the following statements explains why a racecar going around a curve is accelerating, even if the speed is constant?

The car is accelerating because the direction of velocity is changing.

If a logarithmic scale is used on a graph, what can you assume about the range of the data?

The data extend over a wide range of values. The logarithmic scale comes to the rescue when the data extends over a wide range of values.

Billy drops a ball from a height of 1 m. The ball bounces back to a height of 0.8 m, then bounces again to a height of 0.5 m, and bounces once more to a height of 0.2 m. Up is the positive direction. What is the total displacement of the ball and the total distance traveled by the ball?

The displacement is equal to -1 m and the distance is equal to 4 m

Comparing Distance Traveled with Displacement: A Subway Train What are the distances traveled for the motions of the train

The displacement was +2.00 km. Therefore, the distance between the initial and final positions was 2.00 km, and the distance traveled was 2.00 km. The displacement was −1.5 km. Therefore, the distance between the initial and final positions was 1.50 km, and the distance traveled was 1.50 km.

A student calculated the final velocity of a train that decelerated from 30.5m/s and got an answer of −43.34m/s. Which of the following might indicate that he made a mistake in his calculation?

The sign of the final velocity is wrong. The magnitude of the answer is larger than the magnitude of the original velocity.

In a free-body diagram, the arrows representing tension and weight have the same length but point away from one another. What does this indicate?

They are equal in magnitude and act in opposite directions.

True or false? The net displacement in a velocity vs. time graph is the area under the curve. The value if net displacement in the position vs time graph is not different from the net displacement calculated through the velocity vs. time graph.

True

True or false—A book placed on a balance scale is balanced by a standard 1-kg iron weight placed on the opposite side of the balance. If these objects are taken to the moon and a similar exercise is performed, the balance is still level because gravity is uniform on the moon's surface as it is on Earth's surface.

True

True or false—A person accelerates while walking on the ground by exerting force. The ground in turn exerts force F1 on the person. F1 and F2 are equal in magnitude but act in opposite directions. The person is able to walk because the two forces act on the different systems and the net force acting on the person is nonzero.

True

True or false—A rocket is launched into space and escapes Earth's gravitational pull. It will continue to travel in a straight line until it is acted on by another force.

True

For the motion of a falling object, which graphs are straight lines?

Velocity versus time and acceleration versus time

What does it mean for two quantities to be inversely proportional to each other?

When one variable increases, the other variable decrees by the same factor.

What is the difference between distance and displacement? Describe the differences between vectors and scalars using physical quantities as examples.

distance is a scalar and it has no direction attached to it, whereas displacement is a vector and direction is important. Scalar quantities have only magnitude but no direction, whereas vector quantities have magnitude as well as direction.

A cheetah can accelerate from rest to a speed of 30.0 m/s in 7.00 s. What is its acceleration?

initial velocity is 0, final velocity of 30 m/s, t is 7.00 seconds to change from 0 to 30 meters per second. a=change in velocity / change in time (30 m/s - 0 m/s) / 7 s = 4.29 m/s^2

A police officer uses a device to clock a vehicle traveling 85miles per hr (mph). What property is the officer's device measuring?

instantaneous speed

A world record was set for the men's 100-m dash in the 2008 Olympic Games in Beijing by Usain Bolt of Jamaica. Bolt "coasted" across the finish line with a time of 9.69 s. If we assume that Bolt accelerated for 3.00 s to reach his maximum speed, and maintained that speed for the rest of the race, calculate his maximum speed and his acceleration.

the speed is constant for 6.69s so x2=vt=(6.69s)v=100m-x1 accelerate for 3.00s x1=1/2at^2=1/2vt=(1.50s)v 100m-(1.50s)v=(6.69s)v v=100m/(6.69s + 1.50s) v=12.2 m/s a=v/t a=12.2m/s/3s=4.07m/s^2

If a particle is accelerating, which value cannot be constant?

velocity Remember that acceleration is defined as the rate of change of velocity; velocity is a vector, so the change in velocity must either be a change in magnitude (speed) or a change in direction.

Calculating Deceleration: The Subway Train Given 𝑣0=−20 km/h, 𝑣f=0 km/h, Δ𝑡=10.0 s. What is its average acceleration?

Δ𝑣=𝑣f−𝑣0=0−(−20 km/h)=+20 km/h 𝑎=Δ𝑣/Δ𝑡=+20.0 km/h/10.0 s 𝑎=(+20.0 km/h/10.0 s)(10^3m/1 km)(1 h/3600 s)=+0.556 m/s^2

Calculate Acceleration: A Subway Train Slowing Down Given 𝑣0=30.0 km/h, 𝑣f=0 km/h (the train is stopped, so its velocity is 0), and Δ𝑡=8.00 s. What is its average acceleration while stopping?

Δ𝑣=𝑣f−𝑣0=0−30.0 km/h=−30.0 km/h 𝑎=Δ𝑣/Δ𝑡=−30.0 km/h/8.00 s 𝑎=Δ𝑣/Δ𝑡=(−30.0 km/h/8.00 s)(10^3m/1 km)(1 h/3600 s)=−1.04 m/s^2

Calculating Displacement: A Subway Train What are the magnitude and sign of displacements for the motions of the subway train given 𝑥f=6.70 km and 𝑥0=4.70 km and 𝑥′f=3.75 km and 𝑥′0=5.25 km

Δ𝑥=𝑥f−𝑥0=6.70 km−4.70 km=+2.00 km displacement Δ𝑥′=𝑥′f−𝑥′0=3.75 km−5.25 km=−1.50 km displacement

A driver pulls into a parking space at a velocity of 1.6𝑚/𝑠 and brakes to a stop in 0.8s. What is the car's rate of acceleration?

−2.00m/s2 The car is decelerating and is defined as rate of change of velocity with time.

Calculating Acceleration: A Subway Train Speeding Up Given 𝑣0=0(the trains starts at rest), 𝑣f=30.0 km/h and Δ𝑡=20.0s What is its average acceleration during that time interval?

𝑎=Δ𝑣/Δ𝑡=+30.0 km/h/20.0 s 𝑎=(+30 km/h20.0 s)(10^3m/1 km)(1 h/3600 s)=0.417 m/s^2

A racehorse coming out of the gate accelerates from rest to a velocity of 15.0 m/s due west in 1.80 s. What is its average acceleration?

𝑎=Δ𝑣/Δ𝑡=−15.0 m/s/1.80 s=−8.33 m/s^2.

Calculating Average Velocity: The Subway Train Given 𝑥′f=3.75 km, 𝑥′0=5.25 km, Δ𝑡=5.00 min. What is the average velocity of the train if it takes 5.00 min to make its trip?

𝑣=Δ𝑥′/Δ𝑡=−1.50 km/5.00 min 𝑣=Δ𝑥′/Δ𝑡=(−1.50 km/5.00 min)(60 min/1 h)=−18.0 km/h

An airplane lands with an initial velocity of 70.0 m/s and then decelerates at 1.50 m/s^2 given 𝑣0=70.0 m/s 𝑎=−1.50 m/s^2, 𝑡=40.0s.

𝑣=𝑣0+𝑎𝑡=70.0 m/s+(−1.50 m/s^2)(40.0 s)=10.0 m/s

Calculating Final Velocity: Dragsters Dragsters can achieve average accelerations of 26.0 m/s^2. Suppose such a dragster accelerates from rest at this rate for 5.56 s. Given 𝑣0=0, a is 26.0m/s^2, x-x0=402 m

𝑣^2=0+2(26.0 m/s^2)(402 m) 𝑣^2=2.09×10^4m^2/s^2 𝑣=sqrt (2.09×10^4m^2/s^2)=145 m/s.

On dry concrete, a car can decelerate at a rate of 7.00 m/s^2, whereas on wet concrete it can decelerate at only 5.00 m/s^2. Find the distances necessary to stop a car moving at 30.0 m/s (about 110 km/h) (a) on dry concrete and (b) on wet concrete. (c) Repeat both calculations, finding the displacement from the point where the driver sees a traffic light turn red, taking into account his reaction time of 0.500 s to get his foot on the brake.

𝑣^2=𝑣0^2+2𝑎(𝑥−𝑥0) 𝑥−𝑥0=(𝑣^2−𝑣0^2)/2𝑎 𝑥−0=(0^2−(30.0 m/s)^2)/2(−7.00 m/s^2) 𝑥=64.3 m on dry concrete The only difference is that the deceleration is -5.00 m/s^2 The result is 𝑥wet=90.0 m on wet concrete 𝑣=30.0 m/s; 𝑡reaction=0.500s; 𝑎reaction=0. We take 𝑥0−reaction to be 0. We are looking for 𝑥reaction. 𝑥=𝑥0+𝑣𝑡 𝑥=0+(30.0 m/s)(0.500 s)=15.0 m 64.3 m + 15.0 m = 79.3 m when dry 90.0 m + 15.0 m = 105 m when wet

Suppose a car merges into freeway traffic on a 200-m-long ramp. If its initial velocity is 10.0 m/s and it accelerates at 2.00 m/s^2, how long does it take to travel the 200 m up the ramp? (Such information might be useful to a traffic engineer.)

𝑥=𝑥0+𝑣0𝑡+1/2𝑎𝑡^2 200 m=0 m+(10.0 m/s)𝑡+1/2(2.00 m/s^2)𝑡^2 𝑡^2+10𝑡−200=0 𝑡=10.0sand−20.0s t=10 s

Dragsters can achieve average accelerations of 26.0 m/s^2. Suppose such a dragster accelerates from rest at this rate for 5.56 s. Given 𝑣0=0, a is 26.0m/s^2 and 𝑡 is 5.56 s. How far does it travel in this time?

𝑥=𝑥0+𝑣0𝑡+1/2𝑎𝑡^2 𝑥=1/2𝑎𝑡^2 𝑥=1/2(26.0 m/s^2)(5.56 s)^2 x=402 m

A jogger runs down a straight stretch of road with an average velocity of 4.00 m/s for 2.00 min. What is his final position, taking his initial position to be zero? Given 𝑣=4.00 m/s, Δ𝑡=2.00 min, x0=0 m

𝑥=𝑥0+𝑣𝑡=0+(4.00 m/s)(120 s)=480 m