AutoCAD Selected Response Test 2
Controls the way an object is plotted or printed based on its color.
.ctb
A highly compressed file format more suitable for distributing files over the Internet.
.dwf
Assigns plotting and printing commands directly to objects and layers by name.
.stb
Which is the proper way to indicate a line that is four and seven-sixteenths inches long?
4-7/16
At which angles are lines drawn in Ortho mode?
90 degrees
Add an attribute to an existing instance of a block
ATTDEF
Edit the set attribute values for a specific instance of a block
ATTEDIT
Edit the attribute settings for all instances of a block
BATTMAN
Step 1
Click the check box next to the Rotation label
Highlights the differences between a specified drawing file and the current drawing using color within revision clouds.
Compare
Creates a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension.
DIMBASELINE
Prevents dimension and extension lines from overlapping with other objects.
DIMBREAK
Creates a dimension that starts from an extension line of the previous or selected dimension.
DIMCONTINUE
Controls the default spacing of the dimension lines in baseline dimensions.
DIMDLI
Unifies the spacing between parallel dimensions.
DIMSPACE
Which are Inquiry commands? Choose two answers.
Distance & Angle
The Circle command can be found under the Home tab on which panel?
Draw
Arc mode an only be used to create an arc based on angle or length.
False
By default, moving the grip at an endpoint of an arc will adjust the length of the arc but not its radius.
False
Check Spelling applies to text created within the native drawing, but not to text within xrefs.
False
If Associative Hatch is enabled the Hatch Edit menu will no longer be available.
False
When AutoCAD interprets angles, it always starts with zero degrees on the right and rotates clockwise around the circle.
False
You can add a new word to the existing dictionary using the DCTCUST command.
False
When using a circle to create a polygon, which mode ensures that the polygon is created within the circle.
Inscribed
Creates a label consisting of an arrow, a line, and a block or text
MLeader
On which panel is the Trim command located?
Modify
You are editing the default text as shown below. Match each feature of the MText editor on the left with the image that best demonstrates its purpose on the right.
Oblique Angle Justification Tracking Width Factor Font
The Offset command is used to make... lines or concentric circles a certain distance away from each other.
Parallel
Besides area, what else will the Area command reveal in objects?
Perimeter
Which of the following options within the Hatch Edit tool can be used to create a new polyline around a selected hatch?
Recreate boundary
Which are the two types of array patterns in AutoCAD?
Rectangular and Polar
In order to find the area of a complex shape, the shape must be converted into a....
Region
Step 3
Select a point along the wall as the insertion point
Step 4
Select another point along the wall as to set the angle
Step 2
Select the table from the Current Drawing Blocks
How many sides does a hexagon have?
Six
You are working on the floor plan for an office space. For the sake of planning, it has been determined that all desks in the office will take up approximately the same amount of space. You have created a desk block to place in each office. You have also been given the following constraints: *Each of the desks will be made of either oak or mahogany, and this needs to be displayed on the drawing for easy reference *Each desk will have a varying cost, which should be tracked but not displayed *The displayed attribute must match the orientation of the block Which attributes should be created within the Block Editor to accomplish these requirements? (Choose two)
Tag: Material Prompt: Oak or Mahogany? Default:None Invisible: False Verify: True Lock position: True Tag: Cost Prompt: Enter Cost Default: None Invisible: True Verify: True Lock position: True
What is polar tracking?
The direct entry of polar coordinates in the Line command.
By default, you can check spelling for single-line and multiline text as you enter text in the In-Place Text Editor.
True
Holding Ctrl while selecting the midpoint of an arc will allow you to copy the arc to a new location.
True
Holding the Shift key will quickly toggle Ortho mode.
True
Stretching the midpoint of an arc will maintain its width.
True
The Associative Hatch feature causes boundary objects to automatically be selected along with the hatch.
True
True or False: Dragging a block from the Insert Block panel onto the drawing will ignore the specified insertion options and instead insert using the default scale and rotation.
True
Width mode allows you to specify an ending thickness for the section of polyline, creating a growing or tapering effect.
True
You can disassociate a hatch from its boundary object even if Associate hatch is enabled.
True
Which is the minimum amount of points needed to create an arc?
Two
The @8 < 90 command will draw a line in which direction?
Up
Which command allows you to clip layout viewport objects and reshape the viewport border?
VPCLIP
Creates a polygonal area that masks underlying objects with the current background color.
Wipeout
Which of the following are true of working with a PDF underlay in a drawing? (Choose two)
You can create a clipping boundary to specify a portion of the PDF to use. You can snap to 2D geometry stored in the PDF.
Consider the image below. The dimension in the image displays the width hatch representing the rug in the kitchen. You would like to associate the dimension with the hatch so that it automatically resizes if you inrease
You should create a new boundary for the hatch, then associate the dimension with the boundary. Dimensions cannot be associated to a hatch.
Enabling the Associative Hatch selection mode will automatically associate a polyline boundary for
the current hatch and all future hatches
When modifying properties for a hatch, such as Scale, Angle, or Transparency, the changes will be applied to
the current hatch only
