AutoCAD Selected Response Test 2

Ace your homework & exams now with Quizwiz!

Controls the way an object is plotted or printed based on its color.

.ctb

A highly compressed file format more suitable for distributing files over the Internet.

.dwf

Assigns plotting and printing commands directly to objects and layers by name.

.stb

Which is the proper way to indicate a line that is four and seven-sixteenths inches long?

4-7/16

At which angles are lines drawn in Ortho mode?

90 degrees

Add an attribute to an existing instance of a block

ATTDEF

Edit the set attribute values for a specific instance of a block

ATTEDIT

Edit the attribute settings for all instances of a block

BATTMAN

Step 1

Click the check box next to the Rotation label

Highlights the differences between a specified drawing file and the current drawing using color within revision clouds.

Compare

Creates a linear, angular, or ordinate dimension from the baseline of the previous or selected dimension.

DIMBASELINE

Prevents dimension and extension lines from overlapping with other objects.

DIMBREAK

Creates a dimension that starts from an extension line of the previous or selected dimension.

DIMCONTINUE

Controls the default spacing of the dimension lines in baseline dimensions.

DIMDLI

Unifies the spacing between parallel dimensions.

DIMSPACE

Which are Inquiry commands? Choose two answers.

Distance & Angle

The Circle command can be found under the Home tab on which panel?

Draw

Arc mode an only be used to create an arc based on angle or length.

False

By default, moving the grip at an endpoint of an arc will adjust the length of the arc but not its radius.

False

Check Spelling applies to text created within the native drawing, but not to text within xrefs.

False

If Associative Hatch is enabled the Hatch Edit menu will no longer be available.

False

When AutoCAD interprets angles, it always starts with zero degrees on the right and rotates clockwise around the circle.

False

You can add a new word to the existing dictionary using the DCTCUST command.

False

When using a circle to create a polygon, which mode ensures that the polygon is created within the circle.

Inscribed

Creates a label consisting of an arrow, a line, and a block or text

MLeader

On which panel is the Trim command located?

Modify

You are editing the default text as shown below. Match each feature of the MText editor on the left with the image that best demonstrates its purpose on the right.

Oblique Angle Justification Tracking Width Factor Font

The Offset command is used to make... lines or concentric circles a certain distance away from each other.

Parallel

Besides area, what else will the Area command reveal in objects?

Perimeter

Which of the following options within the Hatch Edit tool can be used to create a new polyline around a selected hatch?

Recreate boundary

Which are the two types of array patterns in AutoCAD?

Rectangular and Polar

In order to find the area of a complex shape, the shape must be converted into a....

Region

Step 3

Select a point along the wall as the insertion point

Step 4

Select another point along the wall as to set the angle

Step 2

Select the table from the Current Drawing Blocks

How many sides does a hexagon have?

Six

You are working on the floor plan for an office space. For the sake of planning, it has been determined that all desks in the office will take up approximately the same amount of space. You have created a desk block to place in each office. You have also been given the following constraints: *Each of the desks will be made of either oak or mahogany, and this needs to be displayed on the drawing for easy reference *Each desk will have a varying cost, which should be tracked but not displayed *The displayed attribute must match the orientation of the block Which attributes should be created within the Block Editor to accomplish these requirements? (Choose two)

Tag: Material Prompt: Oak or Mahogany? Default:None Invisible: False Verify: True Lock position: True Tag: Cost Prompt: Enter Cost Default: None Invisible: True Verify: True Lock position: True

What is polar tracking?

The direct entry of polar coordinates in the Line command.

By default, you can check spelling for single-line and multiline text as you enter text in the In-Place Text Editor.

True

Holding Ctrl while selecting the midpoint of an arc will allow you to copy the arc to a new location.

True

Holding the Shift key will quickly toggle Ortho mode.

True

Stretching the midpoint of an arc will maintain its width.

True

The Associative Hatch feature causes boundary objects to automatically be selected along with the hatch.

True

True or False: Dragging a block from the Insert Block panel onto the drawing will ignore the specified insertion options and instead insert using the default scale and rotation.

True

Width mode allows you to specify an ending thickness for the section of polyline, creating a growing or tapering effect.

True

You can disassociate a hatch from its boundary object even if Associate hatch is enabled.

True

Which is the minimum amount of points needed to create an arc?

Two

The @8 < 90 command will draw a line in which direction?

Up

Which command allows you to clip layout viewport objects and reshape the viewport border?

VPCLIP

Creates a polygonal area that masks underlying objects with the current background color.

Wipeout

Which of the following are true of working with a PDF underlay in a drawing? (Choose two)

You can create a clipping boundary to specify a portion of the PDF to use. You can snap to 2D geometry stored in the PDF.

Consider the image below. The dimension in the image displays the width hatch representing the rug in the kitchen. You would like to associate the dimension with the hatch so that it automatically resizes if you inrease

You should create a new boundary for the hatch, then associate the dimension with the boundary. Dimensions cannot be associated to a hatch.

Enabling the Associative Hatch selection mode will automatically associate a polyline boundary for

the current hatch and all future hatches

When modifying properties for a hatch, such as Scale, Angle, or Transparency, the changes will be applied to

the current hatch only


Related study sets

45: Performance Measures & Management Techniques

View Set

Money Management - Chapter 5 - The Banking System

View Set

Ch. 2 AP Microeconomics (Thinking Like an Economist)

View Set

Bus1B Ch 11 Capital Budgeting and Investment Analysis

View Set