C720 Pre-Quiz

5 Steps of Theory of Constraints

1) Identify the system's constraint(s) 2) Exploit what you have to best outcome 3) Subordinate everything else to the above decision(s) 4) Elevate the system's constraint for urgency 5) Repeat

A manufacturing company makes two products. Products A and B are level scheduled and have daily basis requirements of 10 units for Product A and 15 units for Product B. If five cycles are scheduled on a daily basis, how many units of Product A and Product B will be produced in each cycle?

2 units for Product A; 3 units for Product B

An auto service center that specializes in oil changes has two service bays that serve, on average, a total of 24 cars per eight-hour business day. On average, each bay can finish one oil change in 30 minutes. What is the design capacity? 30 min per oil change per bay (8 hr day x 2 (30 min each) =16 x 2 bays =?)

32 oil changes

A furniture company receives an order for 100 dining tables with four legs each. The planner has determined that the projected number of legs on hand is 60 units. If there is no previously scheduled production for legs, what will be the planned production of legs?

340

A rental company has a fleet of 50 cars that can be rented daily if all vehicles have been washed and inspected and are free of mechanical and electrical defects. Due to maintenance requirements and late returns by customers, the rental company is, in general, able to prepare 45 cars per day for rental. On average, 30 cars are rented daily. What is the design capacity for this company?

45 cars/day (how many it can actually rent out)

The original capacity in each process for a computer manufacturer's operations is as follows: Parts inventory: 500 units available per day Assembly: 300 units assembled per day Delivery: 450 units processed per day After the computer manufacturer upgrades the assembly system, it can assemble 550 units per day. According to this information, what is the throughput for this computer manufacturer?

450 units/day

Products A and B for a manufacturing company are level scheduled. Daily requirements are 15 units for product A and 20 units for product B. If three units of product A and four units of product B are produced in each cycle, how many daily cycles should be scheduled?

5

What is the time horizon for medium-range forecasting?

6 to 18 months

A large retail chain is developing an aggregate plan for its "holiday tree" product line. It does not specify Douglas fir, pine, spruce tree, or artificial tree variations, just overall quantity of trees to be offered throughout the holiday season. What is the appropriate time fence for the aggregate plan?

6 to 18 months before the holiday season begins

A rental company has a fleet of 50 cars that can be rented daily if all vehicles have been washed and inspected and are free of mechanical and electrical defects. Due to maintenance requirements and late returns by customers, the rental company is, in general, able to prepare 45 cars per day for rental. On average, 30 cars are rented daily. What is the efficiency rate for this company?

67% (actual / capacity)

Which two company practices reflect the guiding principles of Six Sigma? Choose 2 answers A company tries to reduce variation in the quality of products it offers. A company emphasizes the quality of suppliers because the quality of outputs are determined by the quality of inputs. A company emphasizes the variety of suppliers because the variety of outputs are determined by the variety of inputs. A company tries to reduce the variety in the kinds of products it offers.

A company tries to reduce variation in the quality of products it offers. A company emphasizes the quality of suppliers because the quality of outputs are determined by the quality of inputs.

Which two company practices reflect the guiding principles of Six Sigma? Choose 2 answers

A company tries to reduce variation in the quality of products it offers. & A company emphasizes the quality of suppliers because the quality of outputs are determined by the quality of inputs.

What can be used in a company with a just-in-time (JIT) environment to reduce inventory?

A pull system

Strategic planning is based on a firm's strengths and weaknesses, as well as the threats and opportunities in the external environment. Regarding strategic planning, what is JIT?

A strength

At a software development company, programming Team A can write an average of 1600 lines of new code a day and programming Team B can correct an average of 1100 tested lines of code a day. An automated quality assurance (QA) testing suite can check an average of 2100 new lines of code a day, while the QA Team can test an average of 900 new lines of code daily. Each new line of code must be checked by both the automated test suite and a member of the QA team. Which step should Acme take to optimize the number of corrected lines of code per day?

Add resources to the QA Team to increase the number of lines of code that can be tested each day.

A cell phone manufacturer makes a new model every six months with the latest available technology. The demand for these high-end models is not easy to predict. The manufacturer needs to ensure it has the right components for the new phone model on time. Which supply chain integration strategy should the manufacturer use to get new components quickly?

Agile supply chain

What type of supply chain structure focuses on getting products quickly to market?

Agile supply chain structure

An employee for a manufacturing company calls a supervisor to take time off to care for an ill parent until the employee can arrange for care for the parent. The company has a benefit policy that provides employees with up to five paid time off days for family emergencies. However, there are imminent production deadlines that must be met. Which action should the supervisor take?

Allow the employee to take time off and fill in for the employee if necessary to meet deadlines

Preparing disciplinary action for the entire maintenance department for not following generally accepted procedures for routine maintenance

Allow the employee to take time off and fill in for the employee if necessary to meet deadlines

Which competitive advantage would a company gain from choosing to partner with a single supplier to source similar parts?

An increase in total quality

A semiconductor manufacturer recently purchased a copper ore mine to ensure access to a copper supply for a long period of time. Which supply chain integration strategy did this manufacturer use?

Backward vertical integration

A company makes garage door tracks for residential and commercial customers. The production manager prefers to run all the footage for residential requirements first each day and then change over for the commercial size after the residential orders are completed. The tooling is changed back to the residential size before the end of business each day. Which process strategy is this company using?

Batch processing with some product variety on moderately flexible equipment

During a routine maintenance event on a paint booth at a ceramic maufacturing company, an employee's hand is severely injured when a piece of equipment drops off the hook suspending it above the paint booth. The first-response team lifts the equipment off the employee's hand and rushes her to the emergency room. A representative from the Occupational Safety and Health Administration (OSHA) is on-site within hours to begin an investigation. After several days of investigation, the root cause is determined to be an eye-bolt that had been fabricated in the company's maintenance shop that attached the cable to the hook suspending the equipment. Everyone is extremely remorseful because the employee has lost the use of her hand, but no one is willing to accept the responsibility for creating the eye-bolt. Which two courses of actions would be socially responsible for the company to take? Choose 2 answers

Beginning a company-wide series of training events on safety and employee wellness that is funded by an individual line item in the corporate budget & Preparing disciplinary action for the entire maintenance department for not following generally accepted procedures for routine maintenance

A company makes rulers that are designed to be 20 cm in length with allowance ±0.1 cm. If the actual length of a ruler is 20.2 cm, which factor will the company use to judge the quality of the length of the rulers? Performance Features Conformance Serviceability Aesthetics

Conformance

An oil refinery receives crude oil on a regular basis, which must be refined into five different octane-rated gasoline formulas and diesel. Demand for these fuels is easy to predict. The cost to refine the oil decreases rapidly depending on the size of the refinery that refines the oil. Based on this information, which process strategy should the oil refinery use in its refining process?

Continuous flow

A company sells garage doors through a national retailer and contracts with local installers to complete the installations. The operations manager is responsible for completing the installations in a 14-day period after the sale. The company will be penalized financially if it fails to achieve these objectives. The operations manager's daily responsibilities include contacting installers to expedite orders and ensure deadlines are met. Which two tools that should be used to measure installer performance? Choose 2 answers Control charts to measure the time elapsed to completion Fishbone diagram to chart the method, material, machine, and manpower Gantt chart to measure how much performance has improved Run charts to chart output around the 14-day central tendency

Control charts to measure the time elapsed to completion Run charts to chart output around the 14-day central tendency

The CEO of a service company wants to change the strategy of the company from volume sales to high-quality products. Which philosophy should the CEO implement to emphasize quality over volume? Shewhart's variation reduction Deming's 14 points Ohno and Shingo's kaizen Taguchi's loss function

Deming's 14 points

An employee at a company thinks the department could improve its performance metrics by inspecting 100% of all finished product. Which quality management philosophy would address this employee's opinion?

Deming: Cease dependence on inspection to achieve quality. Eliminate the need for inspection. Build quality into the product in the first place.

A company is experiencing rapid changes in the technology of one of its products. Which characteristic of a SWOT analysis will be of greatest benefit to this company?

Determining opportunities through the examination of previously under-served markets

The owner of an electrical contracting company has determined there is a shortage of skilled technical workers in the local community. Which action should the owner take to address this shortage in the long term?

Develop a relationship with local technical schools through equipment, training, scholarships, or internships to increase the number of enrollees for technical training

Which aspect of quality is demonstrated by a vehicle that has a useful life of 165,000 miles? Performance Reliability Features Durability

Durability

Which statement is true for periodic inventory systems?

Exact inventory balances cannot be kept without a physical count.

A brand new, small retailer adopts a periodic inventory system. What information will the store use to decide the order point?

Expected demand until the next order window plus demand during the lead time

A company manufactures ceramic coffee cups. The company employs automated pottery making machines in creating the ceramic coffee cups. Which one of the production steps is a bottleneck?

Firing the coffee cups in a kiln

A mattress manufacturer holds many patents on their mattresses because they are specially constructed out of unique materials. This leads the manufacturer to open retail stores in high-traffic areas to increase visibility and brand recognition. Which supply chain integration strategy is the mattress manufacturer using?

Forward vertical integration

A lawn mowing service contracts with homeowners and businesses to cut grass during the growing season. There are several elements that affect a lawn mowing service, such as rainy weather, employee turnover, fuel prices, and maintenance repairs that can compress the amount of resources available on any given day. Which two factors could create bottlenecks? Choose 2 answers

Frequent rain and thundershowers & High employee turnover

Which equipment can be used in a just-in-time (JIT) environment to reduce setup time?

General-purpose machines

A critical care hospital ward has nurses for administering medicines, therapists for assisting patients with recovery, and aides for hygiene needs, dressings, and food service. Therapists are the most highly paid members of the staff at $30 per hour. Nurses are also paid well and earn $25 per hour. Aides are entry-level employees and earn up to $12 per hour. There are 28 patients served by seven nurses, four aides, and four therapists. The chief of nursing operations (CNO) determines that when a patient activates the call light, the closest staff member should respond immediately. This tactic provides outstanding patient care. However, from the therapists' perspective, it often seems like the aides are preoccupied elsewhere, leaving the therapists to answer more than their share of call lights. Answering the call lights prevents the therapists from providing therapeutic care for their patients. In fact, the therapists are having difficulty seeing all their patients during the week because they are responding to so many call lights. Which action should the CNO take?

Hire more aides to respond to the call lights

A clothing retailer sends out evaluations to customers to rate quality as "outstanding," "good," "average," and "bad." If the retailer wants to know the annual frequency of each evaluation category, which tool should the retailer use? Pareto chart Control chart Scatter plot Histogram

Histogram

A retail store needs 400 tires to meet the annual demand. The unit purchase price from the supplier is constant at $5/unit. It costs the store $25 to place an order from the supplier and $2 to store one unit in the warehouse for a year. Based on this information, what is the trade-off in inventory management of tires for this store?

Holding cost vs. ordering cost

A company desires to increase the throughput of the products that it manufactures. The firm finds a bottleneck in the availability of its raw materials. What is the firm accomplishing?

Identifying the system constraint

What are two steps in the theory of constraints? Choose 2 answers

Identifying the system constraint & Elevating the system constraint

Which two elements of a SWOT analysis reflect the external impact on productivity?

Opportunity & Threat

Which quality management philosophy uses cause-and-effect fishbone diagrams for root-cause analysis, emphasizes a bottom-up approach to quality, and considers standardization and quality control to move together in improvement? Six Sigma Goldratt's theory of constraints Deming's 14 points for management Taguchi methods Ishikawa's quality circle

Ishikawa's quality circle

A company has a repetitive manufacturing situation where the master schedule does not vary from day to day and is level loaded. Under these circumstances, which manufacturing system should be employed?

Just-in-time

A printing company prints a magazine dedicated to reporting on new scientific discoveries. The company has almost no paper inventory, but rather orders and then receives the paper a day before it prints an edition of the magazine. Which inventory control system is the printing company using?

Just-in-time inventory

An automobile manufacturer has just built its first assembly factory in the United States based on increased demand from customers in the United States. The manufacturer intends to serve the entire U.S. market with this factory. Many of the suppliers for the U.S. factory are near the manufacturer's other plants in India. The new U.S. factory enables the manufacturer to use many more robots to assist in the assembly of the automobiles. Which two location factors were important influences in building this new factory? Choose 2 answers

Labor productivity & Close to customers

A computer company needs to order 50 computer screens from a vendor so they can assemble 100 computers by the end of the month. What does the computer company need to know to ensure the parts arrive when they are needed?

Lead time

A folding chair manufacturer continues to make the same five chairs it has made for the past 15 years. It has worked to minimize inventory throughout the supply chain by sharing information with component suppliers and continuous improvement. Which supply chain integration strategy is the chair manufacturer using?

Lean supply chain

A paper company is implementing JIT in its production of multiple kinds of papers. Which technique should the company adopt to keep a smooth production process?

Level schedule

What is a direct competitive advantage to keeping a workstation clean?

Lower injury rates

A bicycle company receives an order to deliver 200 bicycles by the end of the month. Which planning process will help this company to decide the required quantity of bicycle tires to meet the order?

MRP

A manager is planning staffing needs for a seasonal ice cream stand. The manager expects to have the following number of customers per day each month: January: 20 February: 23 March: 30 April: 60 May: 90 Jun: 120 July: 130 August: 150 September: 100 October: 80 November: 60 December: 30 Which capacity planning strategy should the manager use to achieve this customer demand?

Match

A customer contacts a major retailer one month after purchasing a display model of a BBQ grill island that has been discontinued. The grill was sold "as-is." During the installation, the customer somehow loosened a fitting that is part of a subassembly and is concealed inside the unit. The only way to access the fitting is to dismantle an external bulkhead after removing the stone veneer finish the customer has installed. This repair is a major headache, and the customer is not taking any responsibility for their incorrect actions. What is the socially responsible solution for the major retailer?

Negotiate a cost-sharing agreement with the customer and schedule a visit with the customer to get the grill repaired

When designing a braking system for a commercial elevator, a company has a choice between a product made in the United States, a product made in China, and a product made in Germany. Lead times are three weeks for the U.S. product, five weeks for the Chinese product, and four weeks for the German product. Product testing shows that the U.S. product costs $1.26 each and fails above 80 pounds per square inch, the Chinese product costs $0.89 each and fails above 70 pounds per square inch, and the German product costs $1.99 each and fails above 85 pounds per square inch. The engineering manager specifies performance characteristics that are higher than 80 pounds per square inch, so the supply chain manager procures the U.S. product. However, the supplier is out of stock until tomorrow and these products are needed as soon as possible. What should the supply chain manager do to keep the operations in production?

Order the German products because the performance is acceptable

A company has developed a new product that links a smartphone app to a doorbell and home security monitoring system. There is nothing else like it on the market and no prior sales history from which to develop a forecast. A sales manager is trying to determine the best price point for introduction, while also trying to estimate what first-year sales volumes might be. What are two possible means for determining the price point and first-year sales forecast? Choose 2 answers

Panel of experts & Test market

Many companies implementing a just-in-time (JIT) system have eliminated complex material-handling systems and rearranged the layout of the workplace to move the workers closer to the production floor. Why is the movement of materials simplified in a JIT system?

Parts are moved by hand.

The lead time from a computer manufacturing company to a retail store is two days. The average daily demand of the computers in this retail store is 20 units. Which inventory model should this retail store use to decide when to place an order?

Reorder point model

A hardware store in a small town cannot afford to invest in an automated inventory system. This means they will not generally know the inventory levels of the many sizes of nuts and bolts that they carry. In order to determine those inventory levels, they take a physical count of their fasteners every two weeks. Which inventory system is the hardware store using?

Periodic inventory system

A bank needs to know how much a customer has in their account at any particular time. This enables the bank to determine if the customer has available funds for a withdrawal from their account. Which inventory system should the bank use?

Perpetual inventory system

If a retail store needs to keep an accurate inventory level at all times, which inventory system should be used?

Perpetual inventory systems

What helps to reduce setup time in a JIT system? Choose 2 answers

Placing the needed tools and equipment in predetermined locations & Shortening the downtime of equipment

A computer company receives an order for 100 computers from a customer inside of its lead time. The production planner agrees to support the order. Which two outputs will the MRP system issue? Choose 2 answers

Planned order receipts & Expedite notice

A children's clothing retailer is looking to build a store in a city that happens to be close to one of the company's distribution centers. The retailer opens a retail store on this city's busiest street, which also has other clothing retailers and a department store. Which two factors were influential in opening this store at this location? Choose 2 answers

Proximity to customers & Proximity to competitors (clustering)

Which method can a company use to relate customer needs and expectations to specific design characteristics?

Quality function deployment

A retail store is planning to place a large order. Their suppliers will offer a lower price per unit for a large order. Which model will help the store decide the optimal quantity to order?

Quantity discount model

Imelda Company wants to minimize the total of their ordering costs and holding costs. However, they also understand that ordered items usually cost less per unit when purchased by the case rather than individually. Which inventory management model should they use?

Quantity discount model

In order to optimize a just-in-time production system, what should companies strive to do?

Reduce setup times of machinery.

Because of uncertain demand for residential windows and a desire to keep low inventory, a window manufacturer pays its supplier of aluminum extrusions an annual fee to have production priority for its products. The extrusion company can make other products if the window company does not call in the order. Which supply chain integration strategy is the window manufacturer using?

Reserve capacity & Backward vertical integration

Movie studios traditionally sell rental copies of movies to video rental stores. Instead of paying a very high price for a few copies of movies, one video store makes a deal to pay a small amount for each copy. The movie studio is paid according to how many times the movie is rented instead of the large flat fee. Both the movie studio and rental store make more money this way. Which supply chain integration strategy is the movie studio using?

Revenue sharing

A vice president of a major retailer is trying to reduce the wait time for customers in the checkout line by appropriately opening checkout lines. To do this, the VP needs to know the relationship and degree of correlation between monthly customer visits and area population. Which tool should be used in this situation? Pareto chart Control chart Scatter plot Histogram

Scatter plot

A steel products manufacturer sources their blank sheet stock from a domestic steel service center. However, they are concerned about price shocks in the spot-buy market. Additionally, their annual volume is lower than most of the other customers that also source from the domestic supplier. The executive team is considering a smaller, offshore supplier that has offered a more lucrative pricing structure for their annual volumes. Which two bottlenecks in the supply chain would the manufacturer face if they moved to the offshore supplier? Choose 2 answers

Ship transportation of goods & Customs inspection on incoming imported goods

Which quality tool examines patterns, flow, and causes of variation of data points over time? Quality function deployment Cause-and-effect matrix Students t-test Statistical process control

Statistical process control

An electric company wants to increase service reliability by building new high-voltage wiring. Because service improves for other electric companies on the same grid, the company partners with other companies to plan routes and finance construction. Which supply chain integration strategy is the electric company using?

Strategic alliance

An electronic manufacturer is developing a SWOT analysis in order to build a strategic plan to expand its business to China over the next three years. Which statement is an opportunity based on the SWOT analysis?

The Chinese government has developed new policies to attract manufacturing companies to do business in China.

A generator is used at an off-grid building site to run a chop saw, a concrete mixer, a battery charger, an angle grinder, and a polishing wheel. Because the amperage output of the generator is limited, only two items can run simultaneously. The battery charger is almost always plugged in to the generator to maintain the cordless tools the workers use. The chop saw is used to cut steel struts, and the angle grinder is used to cut cement board sheathing. The polishing wheel is used to smooth out imperfections in the concrete slab. What is the bottleneck in this worksite?

The amperage output of the generator

The sales department for a company is having their sales representatives meet with customers to develop a sales plan for the coming year. The sales plan details prior year sales, current year sales, and year-to-year sales growth. Each customer can estimate how many products they plan to buy from the sales representatives the following year. Each customer signs the sales plan, and the sales representatives forward it to their sales managers. The sales managers then tally up the estimated sales and forward the totals on to the vice president of sales. The vice president then announces what the predicted sales for the company will be for the coming year. What was used to predict sales for the coming year?

The buildup method

An employee for a manufacturing company is handing out literature from a local organized labor union in the company break room. The employees have been complaining about low wages and long hours. The operations manager would like to make socially responsible recommendations to the general manager to resolve these concerns. Which two recommendations should the operations manager make?

The company should develop a pay-for-skills training program & The company should begin one-on-one meetings with employees to listen and develop solutions that address their complaints.

Which two statements reflect strengths discovered when conducting a SWOT analysis at a computer company? Choose 2 answer

The company's brand name and reputation are much better than those of its competitors. & The quality of this company's products is better than that of other companies' products.

Which statement represents a threat for a company?

The competition is more intense in the current market.

What would be considered a bottleneck for the process of going through airport security?

The throughput rate of the full-body scanner

A company that produces motors uses the a "motor assembly check sheet", why would the company use this check sheet? To create a control chart to measure the engine assembly process To create a flow chart of the engine assembly process To develop a suppliers, inputs, process, outputs, customers (SIPOC) diagram To develop a Pareto chart identifying the root causes of engine defects

To develop a Pareto chart identifying the root causes of engine defects

A company wants to establish a new gas station in a location with heavy traffic. The company performs a traffic analysis for four locations during four different time periods. The table below depicts the number of cars that passed each location during the four time periods: Time Period Main Street Fell Avenue Veterans Parkway Market Street Midnight - 6:00 a.m. 1,000 500 1,500 750 6:00 a.m. - noon 4,500 6,000 5,500 4,000 Noon - 6:00 p.m. 6,000 4,500 6,000 5,000 6:00 p.m. - midnight 2,500 1,500 3,000 6,000 Which location should the company choose for the new gas station?

Veterans Parkway

A purchasing manager is responsible for vendor-managed hardware inventory at a client's office chair production facility. The manager notices that ½-inch bolts are out of stock and need immediate replenishment. As the purchasing manager looks over the past usage, it is noticed that more bolts are being used on Tuesday each week than any other day of the week. Therefore, the manager decides to bump up the inventory replenishment for Monday by 50%. Which forecasting method did the manager use to make this decision?

Weighted moving average

A restaurant manager inside a major entertainment venue needs to estimate the amount of soft drinks to order for the coming month. Cumulative convention attendance for each event is estimated at 20,000 people. The manager understands the historical pull-through and turnover rate metrics at the restaurant. Which two tools should the manager use to estimate the total amount of soft drinks to purchase? Choose 2 answers

Weighted moving average using attendance estimates & Simple regression using independent variables to estimate total soft drink use

A hospital administrator needs to determine how many beds to make available for exam rooms, operating rooms, and in-patient care. The hospital board announces they will be getting more patient referrals from specialists at a newly opened clinic. What should the administrator use to forecast how many beds to make available, given the increased number of patients?

Weighted moving average using patient referral data

Under what two conditions should a periodic review system be adopted? Choose 2 answers

When a company must manually track inventory levels & When a supplier will only deliver at a specific interval

Which question might provide insight into a computer company that is trying to determine one of its weaknesses in terms of competitiveness in the industry?

Will the brand name and reputation be less superior than those of other companies?

Which question is important for a computer company to consider when performing a SWOT analysis related to strengths?

Will the quality of its computers be lower compared to other companies' computers?

An appliance manufacturer has two factories located around the world, each with its own capacity: • F1 can make 8 appliances per day. • F2 can make 10 per day. The factories can deliver to two different distribution centers. Every day each distribution center must receive 9 appliances each. The cost to deliver appliances from each factory to each distribution center is listed in the table below: Distribution Center 1 Distribution Center 2 F1 $4 $3 F2 $8 $3 Using the factory production constraints and the delivery costs in the above matrix, what is the lowest cost to deliver all 18 appliances to the distribution centers?

$67

Which competitive advantage would a company gain from having suppliers managing inventory within the company's facilities?

A decrease in overhead costs

A manufacturing company makes three products: A, B, and C. Manufacturing products A and C only involve minimal setup changes, while manufacturing products B and A and manufacturing products C and B involve a great change in setup. Which two sequences would be appropriate to use in level scheduling? Choose 2 answers

A-C-B or B-C-A

Which competitive advantage is gained by reducing setup times?

It increases the time for value-added activities.

The CEO of a large manufacturing company is aware of impending financial problems, but this has not been disclosed to the board of directors. What can correctly be said of the CEO's lack of disclosure?

It is an unethical decision.

A road building crew is supplied with hot asphalt mix from a supplier that is located 30 miles from the worksite. As the road extends, the distance increases from the asphalt supplier. Currently, the bottleneck for the project has been the throughput rate of the paving equipment being used on the road. What will happen to the bottleneck as the project nears completion?

It will change to become the transportation time of the asphalt trucks

An aircraft manufacturer has many highly complex subassemblies such as seats, cockpit, engines, and landing gear. It works with other manufacturers to design and build these subassemblies while doing project management and final assembly themselves. Which supply chain integration strategy is the aircraft manufacturer using?

Outsourcing

A quality improvement team is trying to illustrate to upper management how a process is varying over time as measurements are collected. Which two statistical process control (SPC) tools should the team use? Choose 2 answers Cause-and-effect diagrams Scatter diagrams Histograms Run charts Check sheets Pareto charts Control charts

Run charts & Control charts

What is a characteristic of an agile supply chain?

Suppliers help develop new products that can better meet individual customer needs.

What would be considered a strength for a computer company performing a SWOT analysis?

The computer company has a stronger brand name in the market than other computer companies.

Six Sigma is adopted by a manufacturing company. How can the company use Six Sigma to establish quality improvement? There should be no more than 3.4 defects per million products from a manufacturing company statistically. There should be no more than 6.8 defects per million products from a manufacturing company statistically. There should be no more than 15% of defects per million products from a manufacturing company statistically. There should be no more than 10% of defects per million products from a manufacturing company statistically.

There should be no more than 3.4 defects per million products from a manufacturing company statistically.

A company that produces motors uses the following check sheet: Why would the company use this check sheet? To create a control chart to measure the engine assembly process To create a flow chart of the engine assembly process To develop a suppliers, inputs, process, outputs, customers (SIPOC) diagram To develop a Pareto chart identifying the root causes of engine defects

To develop a Pareto chart identifying the root causes of engine defects

Which items are correct for periodic inventory systems for a retail store that uses a variety of inventory systems?

Items with relatively low values and low usages

Which quality management philosophy assigns cost to quality, defines quality by how well a product can be used for its intended purpose, and uses Pareto charts? Deming's 14 points for management Juran Institute's management theory Taguchi methods Shewhart cycle Crosby's "Quality Is Free"

Juran Institute's management theory

A steel products manufacturer sources their blank sheet stock from a domestic steel service center. However, they are concerned about price shocks in the spot-buy market. Additionally, their annual volume is lower than most of the other customers that also source from the domestic supplier. The executive team is considering a smaller, offshore supplier that has offered a more lucrative pricing structure for their annual volumes. Which two services can the domestic supplier offer that would reduce bottlenecks for the manufacturer compared to the offshore supplier? Choose 2 answers

Just-in-time delivery on a daily basis & Batch sizes optimized for weekly production requirements

A computer company assembles computers to meet market demand. Which inventory model should the company adopt to minimize the total setup cost and carrying cost?

Production order quantity model