I drive safe
•
Altering Risk
•
Anger or rage
4
.18 .15 .13 .11 .10 .09 .08 .08
9
.34 .28 .24 .21 .19 .17 .15 .14
•
A steady yellow signal light ahead warns you that your permission to proceed is about to be terminated. Begin to slow and be prepared to stop. A red light will soon appear indicating it is illegal for vehicle traffic going in your direction to enter the intersection. A flashing yellow light means slow down and proceed with caution. Be prepared to yield to another vehicle or pedestrian if they are already in the intersection.
•
Driver Position
•
Eliminating Alcohol
•
Other State Laws
1.
Sit straight behind the wheel with your back against the seat.
•
Space Behind
•
Speed on Curves
•
The Cost of Crashes
•
Do not tailgate. When following another vehicle, drivers must maintain a reasonable, prudent, and safe distance, considering speed, visibility, road, weather, and traffic conditions.
•
Do not use your horn if you are behind a slow moving vehicle.
•
Do you drive after consuming alcohol?
•
Do you drive as fast as you want when the road is clear and you do not think you will get caught?
•
Do you drive when you are tired?
•
Do you run yellow lights?
•
Do you slow down if someone is tailgating you?
•
Do you want to ram a vehicle that cuts you off or takes the space directly in front of your vehicle?
•
Drifting between lanes and wandering in your own lane
•
Drinking and eating
•
Drive defensively. Try to predict the possible actions of other highway users.
•
Drive only when you are mentally and physically fit to safely operate your vehicle.
•
The design and condition of the roadway
•
The design and condition of the roadway. If road traction and surface conditions are less than ideal, reduce your speed to maintain traction.
•
Headlights
•
Risk Awareness
•
Traffic density and the rate of flow. When you enter a congested traffic area, the space between vehicles is limited. Adjust your speed to open up space to maneuver. If an area is crowded with vehicles, you might be forced to drive at a slow speed.
•
Night Driving
4
.15 .12 .11 .09 .08 .08 .07 .06
5
.23 .19 .16 .14 .13 .11 .10 .09
8
.36 .30 .26 .23 .20 .18 .17 .15
10
.38 .31 .27 .23 .21 .19 .17 .16
9
.41 .34 .29 .26 .23 .20 .19 .17
•
24 hours awake = same effect as .1 blood alcohol concentration
•
27% have children passengers and 19% of those drivers are transporting kids in the backseat.
•
31% listen to a CD player
•
31% of drivers talk on the phone
•
46% apply makeup, comb their hair, and look in the mirror.
•
Cool off when you are angry or frustrated.
•
Do not smoke while you drive. In addition to creating a smoke screen, smoking reduces night vision. It also makes the windshield dirty.
•
Adjust the air conditioner to keep yourself cool and calm.
3.
Adjust the driver's side mirror so you can see the rearmost left corner of the vehicle.
5.
Adjust the head restraint so the top of it is even with the top of your ears.
•
Analgesics (pain pills)
•
Anti-diabetics (sugar medicine)
•
Caffeine (soft drinks, chocolate, coffee)
•
Cannabis (marijuana, pot)
•
Chasing other vehicles in pursuit
•
Check the area for other traffic, pedestrians, small children, or pets running loose. Keep track of those sharing the area around your vehicle. If your vision is obstructed, search around or under those obstacles for things that appear to be in motion.
•
Check your tires for proper inflation.
•
Circadian Rhythm
obtain a professional towing service and have the system repaired before driving.) On-board Systems Checks If the engine does not start, or if it does not sound normal, hire a professional mechanic. Do not attempt to jump start your vehicle if you are not familiar with the procedure and have not read the owner's manual for the specific procedures required for your vehicle. •
Check automatic transmission fluid level. • Inspect brake system. • Inspect hoses. Every 30,000 miles: • Replace fuel filter. • Inspect exhaust system. • Replace engine oil filter. • Inspect accessory drive belts. • Service automatic transmission. • Check battery. In addition to these routine maintenance recommendations, consult your owner's manual for specific guidelines for your vehicle. Some modern self-diagnostic systems are now in vehicles that alert the owner when some routine maintenance should occur - such as "replace the oil." Consult your owner's manual to see if your vehicle is equipped with these warning systems. Gasoline octane ratings are displayed on the fuel pump. Always fuel your vehicle with fuel that has the octane rating recommended by your vehicle manufacturer. Using an octane rated higher than your vehicle requires does not increase power or fuel economy. Increasing Fuel Economy Maintenance tips to increase fuel economy: • Keep your engine tuned. • Use the right grade of gas for your car. • Make sure your gas cap is tight. Loose, damaged, and missing gas caps allow gas to vaporize. • Make sure tires are properly inflated (under-inflated tires are a safety hazard) and wheels balanced. • Change the oil using the recommended viscosity motor oil. • Change the oil filter as recommended. • Replace dirty air filters. • Be sure ignition timing is set to specifications. • Be sure spark plugs are replaced regularly, are the correct type, and are properly gapped. • Replace the PCV valve (Positive Crankcase Ventilation valve) as recommended. • Ensure thermostat is operating properly (an improperly operating thermostat can delay engine warm up using twice as much fuel as a warm engine). • Make sure belts are in good condition and properly adjusted. • Be sure the battery is fully charged. • Be sure the front end of your car is properly aligned to prevent tire wear and aerodynamic drag. Driving techniques to increase fuel economy: • Avoid extended warm-ups. • Avoid unnecessary idling (one minute of idling uses more gas than it takes to restart the engine). • Avoid excessive braking, sudden stops and starts (frequent stops and hard acceleration can use up to one third more gas). • Anticipate the need to adjust speed far ahead. • Select the proper gear for road conditions. • Do not be erratic and dart or weave through traffic (this kind of aggressive driving lowers mileage by as much as 33% on highways and 5% on city streets). • Plan your route and drive at a steady pace. • Do not run the air conditioner unless traveling faster than 40 mph. • Drive at moderate speeds (higher speeds require more gasoline use to overcome air resistance). • Accelerate smoothly to avoid using extra fuel. • Use cruise control when possible. • Maintain a safe following distance to avoid unnecessary braking and acceleration. Refueling Safely Static electricity can ignite highly combustible fuel vapors that are present during the process of refueling. Serious fires have been reported since the early 1990s, yet many consumers are still not aware this danger is present and how it can be prevented. To protect yourself and your passengers from fire during the refueling process: • Never smoke in the vicinity of a fuel pump. • Turn off your engine before and during refueling. • Before touching the fuel pump, discharge the static electricity from your body by touching your bare hand to another metal object such as your vehicle door. • Do not get in and out of your car while refueling. Your body contact with the upholstery of your seats can result in static electricity. Opening and shutting the car door can also produce a static charge. If you experience a fire when refueling, leave the nozzle in your vehicle and back away. This will prevent any fire from becoming worse. If there is a fire, notify the station attendant to shut off all pumps immediately. Identify a good mechanic before you experience vehicle failure. New car dealers and repair shops display certificates and approvals earned by mechanics who have passed specialized repair courses. This is an indication that the repair shop has the expertise required to repair your vehicle. Sometimes only your car dealer has the approvals, equipment, and diagnostics required to service sophisticated systems. Ensure your repair facility has the manufacturer's approval to maintain your vehicle. Before you have work done on your vehicle, require a detailed estimate. Shop around - eliminate the highest and lowest estimate. The estimate should list the service, the parts, and labor as separate line items. Do not authorize any work to be done that you have not approved on the estimate. If parts are replaced, request the replaced parts be returned to you when you pick up your vehicle. Keep copies of all service and maintenance records related to your vehicle. Conduct weekly, monthly, and mileage-based maintenance to prevent moving and non-moving vehicle failure. Consult your owner's manual for specific guidelines for your vehicle. As you approach your vehicle, look underneath and around it for any leaking fluids. Color indicates the type of fluid leaking out. Check your owner's manual to be sure of the color and appearance of the fluids in your vehicle. Common fluid colors and their indications include: • Red: Transmission fluid (check transmission seals) • Purple: Power steering fluid (check system) • Black: Motor oil (check the engine, and replace the oil) • Green or Orange: Coolant (check the water pump) • Clear: Water (usually normal condensation or water from the air conditioner) After you start your vehicle, ensure that the warning lights are off. As you begin to drive, always check your brakes. Do not authorize any work to be done that you have not approved on an estimate. Also, keep copies of all service and maintenance records related to your vehicle. Using an octane rated higher than recommended for your vehicle does not increase power. One driving technique that could increase your fuel economy is to avoid unnecessary idling. When shopping for a new or used vehicle, shop for safety features and new vehicle technologies. Many of these new features are designed to assist you in maneuvering and controlling the vehicle. Over six million police-reported crashes occur each year. Remember this when you are in the market to purchase a new or used vehicle. Shop for safety
•
Drivers
•
Exercise the right-of-way rules.
•
Fast food restaurant drive-up lanes
•
Grief
•
Leaning forward while driving
Painkillers - Analgesics: Aspirin, Excedrin
Over-the-counter Bleeding in stomach and intestines
•
Playgrounds, school yards
•
Position your vehicle in the center of your traffic lane. Signal your intention to change lanes or turn.
•
Railroad crossings
2.
Reaction distance
•
Residential areas
•
Risk Assessment
•
Sleep Driving
•
Slowed reaction time
•
Talking
•
Tell your doctor about every drug you are taking, including OTC medicines and those prescribed by other doctors.
•
Throwing objects from the vehicle
•
When a vehicle pulls in front of you, do you speed up and try to get around it, even though it is risky?
•
When bicyclists are in your lane do you want to get right behind them and honk the horn?
•
You are distracted.
•
Your eyes close or go out of focus by themselves
•
Your lane is ending. If your lane is ending, you must yield the right-of-way to vehicles already traveling in adjacent lanes.
Introduction
the section that leads into a book; the opening
•
Driving at an unsafe speed
•
Driving at night. Driving at night can be more dangerous than driving during the day due to reduced visibility as well as drivers being fatigued.
•
Driving is a Privilege
•
Driving is a dangerous, complex task that demands your full time and attention. Risk is lowest when you handle one task at a time.
•
Driving on Long Trips
•
Driving on a hill or incline.
•
Driving recklessly
3.
To return to your original path, simply reverse the process or let the wheel slide through the fingers.
•
To signal your intention to turn left, extend your left arm straight out to the left, at shoulder height.
•
To signal your intention to turn right, extend your left arm out and bend it up at the elbow.
•
To signal your intentions to slow or stop, extend your left arm down to the left side of your vehicle.
•
Exiting a driveway or parking space. Yield to all vehicles already traveling in the roadway.
•
Time zone changes interfere with your normal body clock and schedule.
•
Two proofs of identity (i.e. U.S. Birth Certificate or Passport)
•
Types of Drugs
•
"Tap" on your horn to warn other drivers or pedestrians who cannot see you coming.
0
.00 .00 .00 .00 .00 .00 .00 .00 Only Safe
1
.04 .03 .03 .02 .02 .02 .02 .02 Impairment
1
.05 .04 .03 .03 .03 .02 .02 .02 Impairment
6
.23 .19 .16 .14 .13 .11 .10 .09 Legally
7
.26 .22 .19 .16 .15 .13 .12 .11
•
12 hours awake = same effect as .032 blood alcohol concentration
•
Alcohol
•
Alcohol and Driving Behavior
•
Alcohol-related Traffic Crashes
•
Aggressive Driving
•
As you approach the intersection, continue to search for pedestrians and conflicts.
•
Assess the conditions of the roadway and your route.
•
At 30 mph, 30 seconds ahead is close to two blocks.
•
Be a considerate driver.
•
Be familiar with your vehicle's features and functions.
•
Blood Alcohol Concentration (BAC)
•
Communicate your intention to stop or slow by tapping your brakes
•
Conduct a pre-drive inspection of your vehicle.
•
Conduct a pre-drive inspection of your vehicle. Are the tires properly inflated? Is the windshield clean?
•
Lysergic Acid (LSD/acid)
3.
Crash severity increases by the square of the speed; for example, when speed increases from 40 to 60 mph, speed goes up 50 percent while the energy released in a crash more than doubles.
•
Dangers of Combining Drugs
•
Dangers of Drug-impaired Driving
•
Demonstrate courtesy to others on the roadway.
•
Demonstrate the kind of courtesy you would like to receive from others.
•
Denial of one's own driving mistakes
•
Depressants
•
Driving after drinking. Even one drink affects your ability to safely operate a vehicle.
•
Driving after illegally consuming alcohol (persons under age 21) (3 years)
•
Driving at High Speeds
•
Emergency hazard lights
•
Following a large truck or vehicle with limited rear vision.
•
Following a large vehicle that is blocking your view of the road ahead.
•
Following a vehicle too closely
•
Following motorcycles.
1.
Get plenty of sleep before you depart.
•
Give your eyes a chance to adjust to darkness, especially after entering the dark from a brightly lit room. Give your eyes at least 30 seconds to adjust to the darkness while your engine is warming up. Keep in mind, it does not have to be pitch black for light levels to be inadequate.
•
Glare recovery
•
Go with the flow of traffic. Do not try to beat it or fight it.
•
Identify multiple turn lanes and watch for road markings. Select the lane you want to travel in well in advance.
•
If less than 18 years of age, have an appropriate family member sign the financial responsibility agreement portion of the application
applying the parking brake too abruptly may lock the rear wheels and put the vehicle in a skid. To prevent this, use your thumb on the release button, or pull the brake release as you alternately apply and release pressure using the parking brake. •
If necessary, steer towards something soft (sand or pea gravel) or into a clear area off the roadway. • If a collision is unavoidable, steer to sideswipe rather than colliding head-on
5.
Inattention
•
Learned Information
•
Leaving the scene of a collision
•
Lengthened reaction time
•
License Revocation and Suspension
•
Licensing Requirements
•
Lights
•
Listen to soothing music.
•
Keep your vehicle in good mechanical condition.
•
Mental - A tendency toward inactivity brought on by mental or emotional stress.
•
Mental Readiness
•
Mescaline and Peyote (mesc)
•
Micro-sleep
•
Momentum is increased and it takes the brakes longer to stop the vehicle.
•
Muscle ache
the two turns should be made as a single "steer, counter-steer" move. •
Most hazards or obstacles will be detected in front of your vehicle, requiring you to brake or steer to avoid a collision. The accelerator can also be used effectively to avoid potential crashes from the side or the rear. These events often occur at intersections and in merging situations. Accelerate out of danger when you detect a vehicle in cross-traffic about to hit you broadside in an intersection. Hard acceleration may get you out of their path or at least alter the point of impact to the rear of your vehicle, away from the passenger compartment. Evasive acceleration is also an effective maneuver when merging, or when another vehicle is merging into your path. The accelerator can also be used effectively to avoid being hit from the rear. Maintain a cushion of space in front of your vehicle and if possible an escape path in the event you detect a vehicle coming too fast from the rear. Use that space and accelerate out of danger. If you use evasive acceleration, remember to slow back down to the posted speed limit. • In many cases, when a crash is about to occur, there are maneuvers and techniques you can use to escape or minimize the severity of a crash. The first step to collision avoidance is being in the proper seat position to ensure optimal control of the vehicle. To avoid panic stops, look well down the road and locate places where others may cross your path. Maintaining a 3-second following distance is effective in good conditions at speeds under 50 mph. At highway speeds greater than 50 mph, when driving through hills, curves, inclement weather, or low-light conditions, increase the space ahead to at least five seconds. To lower the probability of a collision, try to maintain at least one car width of space to one side of your vehicle at all times. When possible, it is best to maintain space on both sides of your vehicle. When you must drive through an area with less than one car width of space on the sides, reduce your speed to allow more space to the front. The most important thing to remember when driving on the shoulder, or any dirt or gravel surface, is your tires do not have the same level of traction as they do on pavement. On low traction, you cannot turn as sharply on off-road surfaces or brake as hard as you can on the roadway. When you are being followed too closely by another vehicle, allow more space ahead and identify an escape route to at least one side. Evasive acceleration is an effective maneuver during merging situations or when you detect another vehicle about to hit you from the side. ccasionally you encounter unexpected obstacles that demand more skill than you practice with your everyday driving maneuvers. Emergency maneuvers are often required to avoid collisions or regain control of the vehicle. Be prepared in the correct seating position with your hands in the low-hand steering position. To reduce the probability of serious injury keep your safety belt securely fastened at all times. To quickly avoid an obstacle, steering is often more efficient than braking. If you find yourself in a skid, make every effort to regain traction. Look and steer in the direction you want the vehicle to go and remember not to over-correct your steering. These are a few advanced driving tips that are presented in detail within this module about emergency maneuvers. Topics covered include: • Braking Methods • Steering Methods • Off-road Recovery • Skid Detection • Skid Recovery • Braking may be the best choice if you have enough time and distance to avoid colliding with an object in your path. Just before a crash occurs, many drivers panic and "slam" on the brakes. Unfortunately this may lock the wheels and put the vehicle into a skid. • Anti-lock Brake Systems • • The primary benefit of anti-lock brakes is to enable the driver to steer the vehicle while bringing it to a stop during an emergency situation. Anti-lock brakes may not make much difference in stopping distances on dry roads, but they do help drivers maintain control of the vehicle during sudden stops on wet or slippery surfaces. It is important to know if your vehicle is equipped with an anti-lock brake system (ABS). Check the instrument panel to see if the "ABS" light illuminates for a short period of time after you start the vehicle you are driving. In a vehicle equipped with anti-lock brakes, a sensor on each wheel monitors speed and detects when a tire starts to skid. As soon as the skid is detected, the ABS automatically pulses the brake pressure (up to 20 times a second) on any wheel to get it to turn again. The purpose of ABS is to prevent the wheels from locking so the driver can steer the vehicle while continuing to bring it to a stop. In an ABS-equipped vehicle, when you put on the brakes hard enough to make the wheels lock momentarily, you will typically feel the brake pedal pulse back against your foot. This is a normal pulsing action and indicates that the ABS is working. In an effort to stop the vehicle quickly, many drivers will lift their heel off the floor and slam down on the brake pedal with the ball of their foot. In a vehicle not equipped with anti-lock brakes, this over reaction will generally lock the wheels and put the vehicle into a skid. If you must stop suddenly in a vehicle without ABS, use the threshold braking method. Follow these procedures: • Pivot your foot from the accelerator to the brake pedal. • Quickly press the brake firmly, stopping just short of locking the wheels. • If the wheels begin to lock, let up slightly with your toes to release brake pressure one or two degrees, just enough to get the wheels turning again, then immediately reapply it with slightly less pressure. • Continue pressing the pedal until the vehicle comes to a stop. Threshold Braking In some emergency situations, the best action is a combination of controlled braking and evasive steering. The purpose of controlled braking is to achieve the shortest possible stopping distance without losing directional control. With or without ABS, the best way to make a controlled stop in an emergency is to use the threshold braking method. With the heel of your foot on the floor, use your toes to quickly apply firm, steady pressure on the brake pedal just short of lockup--the point at which the wheels stop turning. What would you do if a truck ahead of you suddenly dropped a ladder in your path? You are traveling too fast to stop, but you might have enough time to steer and avoid hitting the ladder. Search and adjust speed/space for improved visibility and room to maneuver. If you see a hazard directly in your path requiring an immediate evasive maneuver, rely on your ability to quickly and effectively operate your steering wheel and brakes. In some emergency situations, it is best to use a combination of the controls. If you are traveling over 30 mph and an obstacle suddenly appears in your path, there probably is not enough time or distance for you to stop. Rather than collide with the obstacle, steering to avoid it takes less time and is just as effective. However, you must be careful to avoid other obstacles and sharp, abrupt, uncontrolled steering movements or over-correcting. • Identify a clear path to one side of the vehicle. • Look and steer with precise control in the direction you want the vehicle to go - be cautious not to steer into another hazard. Do not cross lanes into oncoming traffic. • Stabilize the vehicle and return to your lane. Controlled braking will reduce the damage to your vehicle when there is not enough time or distance to stop. When you cannot stop in time to avoid hitting something, steer around it. To make quick turns you must hold the steering wheel correctly. Place your hands on opposite sides of the steering wheel at the 8 o'clock and 4 o'clock hand positions. Why the 8 and 4 position? The new recommendation allows more freedom of movement based on your height, arm length, seat height and steering wheel position. It also gives room for the air bag to deploy without injuring your hands. For most drivers, when properly seated, an 8 and 4 hand position allows a smooth rotation of the steering wheel in either direction of nearly 90 to 160 degrees in either direction without crossing your arms. With the push/pull or push/pull/slide method, while one hand pushes or pulls the steering wheel up or down in the direction of the turn, the other hand slides up or down to make fine adjustments as necessary. What would you do if a truck ahead of you suddenly dropped a ladder in your path? You are traveling too fast to stop, but you might have enough time to steer and avoid hitting the ladder. Search and adjust speed/space for improved visibility and room to maneuver. If you see a hazard directly in your path requiring an immediate evasive maneuver, rely on your ability to quickly and effectively operate your steering wheel and brakes. In some emergency situations, it is best to use a combination of the controls. If you are traveling over 30 mph and an obstacle suddenly appears in your path, there probably is not enough time or distance for you to stop. Rather than collide with the obstacle, steering to avoid it takes less time and is just as effective. However, you must be careful to avoid other obstacles and sharp, abrupt, uncontrolled steering movements or over-correcting. • Identify a clear path to one side of the vehicle. • Look and steer with precise control in the direction you want the vehicle to go - be cautious not to steer into another hazard. Do not cross lanes into oncoming traffic. • Stabilize the vehicle and return to your lane. Controlled braking will reduce the damage to your vehicle when there is not enough time or distance to stop. When you cannot stop in time to avoid hitting something, steer around it. To make quick turns you must hold the steering wheel correctly. Place your hands on opposite sides of the steering wheel at the 8 o'clock and 4 o'clock hand positions. Why the 8 and 4 position? The new recommendation allows more freedom of movement based on your height, arm length, seat height and steering wheel position. It also gives room for the air bag to deploy without injuring your hands. For most drivers, when properly seated, an 8 and 4 hand position allows a smooth rotation of the steering wheel in either direction of nearly 90 to 160 degrees in either direction without crossing your arms. With the push/pull or push/pull/slide method, while one hand pushes or pulls the steering wheel up or down in the direction of the turn, the other hand slides up or down to make fine adjustments as necessary. What would you do if a driver in an oncoming vehicle on a two-lane undivided roadway suddenly loses control of his vehicle and swerves into your lane? This is a manageable situation. You should steer to the right. Here are successful techniques to execute a controlled off-road recovery. Going Off the Road • Do not panic - release the accelerator and stay off the brake. • Look at your escape route to the right - your two right wheels or all four wheels may be on the unpaved shoulder. • If there is enough time and space, let the vehicle slow gradually before leaving the paved surface. • Turn the steering wheel right just enough to get onto the shoulder - your two right wheels or all four wheels may be on the unpaved shoulder. The off-road wheels should be 12 to 18 inches from the edge of the pavement. Returning to the Road • Look for a spot where the unpaved shoulder is about the same height (no more than two inches lower) as the paved road. • Check your rear-view mirror, side-view mirror, and blind spots for obstructions. • Signal your intentions before returning to the roadway. • When the path is clear, turn the steering wheel 1/16 to 1/8 of a turn to the left. Immediately after you feel the front tire(s) make contact with the edge of the pavement, turn the steering wheel to the right about 1/8 of a turn. At the same time, accelerate to prevent over-steering. • Once you are back on the road, position your vehicle in the center of your lane and accelerate to the proper speed. Note that the height difference between the paved road and the shoulder may affect the stability of your vehicle. Avoid panic braking or acceleration which could cause your vehicle to skid. Finally, if you turn the steering wheel too sharply, your vehicle may skid, roll over, or head directly across the roadway into oncoming traffic. Most drivers feel helpless during a skid because they lose traction and control of the vehicle's direction. Early detection is key to safe recovery. Most skids are caused by drivers traveling too fast for conditions. Excessive speed and wet, snowy, icy, or sandy road conditions combined with abrupt braking, steering, or acceleration can cause a skid. When you drive on reduced traction surfaces and try to change speed or direction too quickly, or try to change speed and direction at the same time, you greatly increase the risk of skidding. Early skid detection includes recognizing the cause. Skids are caused by: hard braking, abrupt acceleration, or traveling too fast. • Braking skid. Braking skids occur when the brakes are applied so hard that the front or rear wheels lose traction. Regardless of which wheels lock, steering control will be lost. If the front wheels lock or lose traction (understeer), the vehicle skids straight ahead. If the rear wheels lock or lose traction (oversteer), the rear of the vehicle slides sideways. • Power skid. A power skid occurs when you suddenly press too hard on the accelerator and the drive wheels (front or rear) lose traction. A vehicle with front-wheel drive plows straight ahead. The rear end of a rear-wheel drive vehicle will skid to the side (fish tail). • Cornering skid. If you drive too fast while making a turn or traveling through a curve, the front or rear wheels may lose traction. In a front-wheel skid, the vehicle will plow through the corner and tend to run off the outside corner. In a rear-wheel skid, the rear end of the vehicle may slide sideways. As you continue to drive and encounter conditions that cause skids, think about the keys to early detection. Doing so will help you to handle these rare driving emergencies when the "real thing" happens. Even for experienced drivers, skids can be frightening and dangerous. When road conditions change and traction is reduced, your tires could lose their grip on the road's surface, causing a skid and loss of vehicle control. Regaining control of your vehicle when you find yourself in a skid requires you to: • Respond quickly and don't panic. • Look and steer in direction of the skid. • Make smooth steering corrections. • Don't give up. You may have to make several steering corrections before you regain steering control. Slightly different procedures are required to recover from various skids: • Braking skid. Recover from a braking skid by releasing the brakes just enough to allow the wheels to turn. When the wheels begin to roll, steering control will return. If you still need to slow the vehicle, use the threshold braking method. • Power skid. Recover from a power skid by easing off the accelerator until the wheels stop spinning. Then make steering corrections as necessary until you are back on your intended travel path. • Cornering skid. To correct a rear-wheel skid, ease up on the accelerator, avoid using the brakes and steer in the direction you want the front of the vehicle to go. A number of steering corrections may be necessary. To correct a front-wheel skid, ease up on the accelerator and steer toward your intended travel path. If you release the accelerator too quickly in this situation, the rear of the vehicle may slide sideways. Most skids are caused by driver error, although only about 15% of collisions are the direct result of a vehicle skidding. Most crashes happen because drivers take no action, the wrong action, or last-minute actions. Do not be one of those drivers. Understand the environment you are traveling in and compensate as necessary. We encounter unexpected obstacles that demand more skill than we practice with our everyday driving maneuvers. Be prepared in the correct seating position with your hands in the low-hand steering position. To reduce the probability of serious injury, keep your safety belt securely fastened at all times. Braking may be the best choice if you have enough time and distance to avoid colliding with an object in your path. If you have ABS, apply firm, steady pressure on the brake pedal. Do not pump the brake pedal or remove your foot from the brake. There are major advantages of using push/pull steering with lower hand positions: • Injuries to the arms, hands, face, and eyes are greatly reduced during a collision when the driver-side air bag deploys. • Maintaining a hand position more closely associated with a normal seating position reduces muscle fatigue. • The driver tends to not turn as much
•
Nausea
•
Navigation systems
•
Negativity that condones hostility on the highway
•
Never tailgate. Always travel with an adequate cushion of space ahead of your vehicle.
•
Never take a drug prescribed for someone else.
•
Never take more of any drug than is prescribed.
drive during the morning and evening hours. •
Never leave for a trip when you would normally be sleeping. Your body will want to sleep and your ability to concentrate will be impaired. • If you are driving in winter and the road is wet before nightfall, it might be a frozen sheet of ice in the morning. Check the local radio, television stations, or the roadway itself - if it is icy, delay your departure until conditions improve and it is safe to travel. • Check the local weather forecast the evening before you depart. Plan your departure time when there is no precipitation or fog in the forecast. Pack the vehicle carefully. Overloading can have an adverse effect on your vehicle's handling, acceleration and fuel efficiency. • Pack emergency equipment (flares, safety triangle) and ensure your spare tire is properly inflated. • Pack maps and necessary documents in a safe and easily accessible area. • Do not obstruct your vision to the rear. • If you plan to pack the vehicle full or travel with heavy cargo, reference your owner's manual for the maximum load weight and tire pressure recommendations. • Pack the heaviest items at the bottom of the trunk or storage area. • Pack lighter items in a vehicle top carrier, if one is being used. • If you take medication, make sure to pack enough to last for the entire trip. Personal Safety • While fueling, or when paying for fuel, never leave your keys in the ignition and your money or other valuables in a location where they can be seen by others. Try to re-fuel during daylight hours. • If you stop for the night, stop and re-fuel before dark. If you stop for food, try to park where you can see your vehicle from inside the establishment. • If you stop for lodging, park where your vehicle can be easily accessed and seen - park near an entrance, exit, or in a well-lit location (if you are towing a trailer, back into the parking location so that the rear is opposite your motel door). • If you have a travel companion, stay together Renting a car can be a simple and easy process. But, for something so simple, many people end up with the unfortunate surprise. A quick, uninformed or misinformed decision can bring delays, unnecessary expenses or major legal hassles. Often the rate quoted only includes the per day or week rental charge. Get an estimate of your total charges including all taxes, fees and any mandatory charges. Remember that this total may change based on your choices of coverage and fuel purchase options. Saving Money on Your Rental Car • Check the mileage policy to avoid extra charges. • Make your reservation as soon as you have decided on plans. Most rental car companies increase their rates as reservations come in and their fleets become booked. Also, certain classes of cars will sell out and you may have to reserve and pay for a larger vehicle than you want. • Being flexible about your travel plans can save you money. Rental companies that focus on the business of replacement-market customers often have great weekend specials. The best rates are found during the off season and at other times when the rental companies have extra cars sitting around. • Check into booking your vacation as a package. You might be able to save by booking your car along with a certain airline, hotel or attraction ticket package. Additional Drivers • Additional drivers are often required to meet most, if not all, of the same requirements as the renter. Upon receipt of the contract, the additional driver must usually be present to show his or her valid driver's license to the company representative. • Many rental companies will charge a fee to list an additional driver. • If someone else drives the car without the rental company's permission, you have most likely violated the contract terms and any protection you had under that contract may be voided. This violation could complicate or even negate claims against your personal insurance and negatively impact any coverage you receive from your credit card. • If the police stop an unauthorized driver, that driver can be detained or even arrested because he or she does not have any legal right to have possession of the vehicle. Before Driving a Rental Car • Every type of vehicle is different. Before driving a car that you have rented, become familiar with its features and understand its handling characteristics. • Conduct your standard pre-drive procedure that includes a walk around. Take note of how big or wide the vehicle is compared to what you are used to driving. During the walk-around, make note of any existing damage. If there are scratches or dents, point the damages out to the agency before leaving the lot. • Check the location and condition of the spare tire. • Once you are seated in the vehicle, adjust your seat position, mirrors, and head restraint. Become familiar with the primary and secondary controls. Note the location of the parking brake. Adjust the tilt of the steering wheel
•
Parking lots
avoid this situation at all costs. Also, when stopping at an intersection, leave space in front of your vehicle for an "out" if you need it. Another unique feature of the city traffic environment is driving on one-way streets. Watch for signs identifying a street as one-way. For example, you may see signs that say ONE WAY, DO NOT ENTER, WRONG WAY, NO LEFT TURN, or NO RIGHT TURN. Other clues that indicate a street is a one-way street include the following: •
Parking is allowed on only one side of the street • All vehicles are pointing in the same direction • Yellow lines are absent Begin preparing to enter a one-way street at least one block before you reach it, and turn into the first available lane that is heading in the proper direction. Drive slowly since one-way streets may turn into two-way streets. You may also encounter hazards, such as drivers who have gone the wrong way down the one-way street. If you discover that you or another driver are traveling the wrong way on a one-way street, slow, steer out of the way, and sound your horn. Flash your headlights if there is time. Do not panic! Choose the lane with the fewest hazards. The middle lane is often the best choice. If there are only two lanes, drive in the right-hand lane or select the one that is farthest from any parked cars. When exiting a one-way street, carefully check the signs to be sure you are turning onto the correct street. If you are making a right turn, use the right lane. If you are making a left turn, use the left lane. If you are going straight, use the center lane if it is available. Check signs to determine if you are turning onto another one-way street or onto a two-way street. In the city, drivers need to make a continuous search for pedestrians because there is a high pedestrian population, they are usually in a hurry and they are hard to see. There is a higher concentration of pedestrians in urban environments because buses and other transit systems such as trains and subways shuttle people into the city in large groups. In addition, the drivers that enter urban areas to go to work become pedestrians after parking and exiting their vehicle. Pedestrians are often in a hurry and will dart and dash between parked cars. Several pedestrians may exit a commercial bus all at once. Your line-of-sight may be blocked so scan low for hidden pedestrians. Check for shadows under other vehicles. The Department of Transportation (DOT) is doing several things to help pedestrians cross the road with lower risk. They are implementing count-down pedestrian signals to help pedestrians gauge the amount of time they have to cross before traffic enters their path. Also, mid-block crossings and pedestrian refuge areas are being installed. New, bolder crosswalk markings are being painted on the road so drivers will quickly and clearly recognize these areas. As a driver, you are required to yield to pedestrians in a crosswalk. Watch the pedestrian signals so you are aware of the direction they are about to walk. Use the pedestrian signals to estimate when your signal is about to change. Scan in all directions before entering an intersection to ensure there are no pedestrians in your path. Be extra cautious when you are turning. If your light is green, pedestrians may be walking in the cross-lane directly in your path - they have the right-of-way. Urban or city roadways have large populations, high traffic flow, many road controls, and a large amount of visual stimulation. With congestion and traffic jams, speeds tend to be lower, but there is quite a bit more sensory input that you have to pay attention to. Urban driving often involves limited vision. Limited vision often eliminates advance warning of traffic obstacles. High buildings, delivery trucks, and other large vehicles can restrict your field-of-view. Bicyclists and pedestrians are everywhere and can also block your line-of-sight. If you find yourself in heavy traffic, demonstrate patience and courtesy. Becoming angry or aggressive will not get you to your destination any sooner. In the city, be prepared to slow or stop suddenly - cover the brake. Your foot will be in position for a sudden stop. As a general rule when driving in the city choose a lane that is not congested or at least less congested than the other lanes. Do not dart in and out of traffic. Watch for signs identifying a street as one-way. Begin preparing to enter a one-way street at least one block before you reach it, and turn into the first available lane that is heading in the proper direction. Drive slowly since one-way streets may turn into two-way streets. Your tires need to grip the road and you need to be able to see where you are going. These fundamental necessities for safe driving are affected when you are faced with poor traction and poor visibility conditions. Anything on the roadway that makes it wet, slippery, or unstable will affect your tires' ability to hold on to the road. Low tire tread will also affect your tires' ability to channel moisture away and increases the risk of hydroplaning. Anything that makes it hard to see through your windows or distorts what your mirrors are reflecting presents a poor visibility condition. Inclement weather has the potential to cause low traction and/or low visibility. This module is about how to prepare for and manage adverse conditions while driving. Topics include: • Preparing to Drive in Adverse Weather • Reduced Traction • Managing Visibility in Adverse Weather • Hydroplaning • What to Do if Your Vehicle is Stuck Before the rainy season begins, prepare your vehicle for wet weather driving. Carry an umbrella and keep your windshield, windows, and headlights clean. Service your vehicle. Ensure the following systems are in good operating condition: • Tire inflation, tread depth • Windshield wipers, fluid, and blades • Battery • Lights • Brakes • Ignition Prepare yourself for driving in wet weather by allowing ample travel time, and be mentally alert for common driver mishaps caused by weather. Eliminate as many distractions as you can inside the vehicle - what is happening outside the vehicle will be more challenging and require your undivided attention. Vehicle Preparation for Winter Driving In many parts of the country the winter months are harsh and very rough on your vehicle. If you have to drive in ice and snow, conduct the following maintenance checks before the winter months arrive: • Change the engine oil to an oil with a viscosity designed for cold temperatures. • Check the battery
1.
Perception distance
1.
Perception distance - This is the distance your vehicle travels from the time you visually see a hazard with your eyes to the time your brain registers it and triggers a response. The faster you travel, the less information you are able to see and process. Beware of highway hypnosis or daydreaming, as it can dramatically decrease perception distance. This will be discussed in more detail later in the course. Other factors that can decrease perception distance are fatigue, drowsiness, and illness.
•
Phencyclidine (PCP)
•
Physical - A tendency toward inactivity brought on by physical exhaustion.
•
Physical Readiness
4.
Push/pull steering eliminates hand over hand and crossing the arms while steering. The hand over hand steering is a much harder procedure and it requires greater muscle strength.
•
Responding Appropriately to Traffic Controls
5.
Rest. If necessary, find a hotel to prevent a fatigue-related crash.
6.
Reckless driving
•
Reckless driving - racing/causing death is a felony punishable by term of confinement for not less than 1 year and not more than 20 years and one-year license revocation (11 years)
•
Reckless driving-driving too fast for conditions (11 years)
research the vehicle's crash ratings. One of the first considerations when purchasing a new vehicle is vehicle size and weight. Small, light vehicles generally provide less protection than larger, heavier ones. Deaths and injuries are more likely to occur in small vehicles because there is less structure to absorb the energy of a crash. While the chance of death and injury is higher in lighter vehicles than heavier ones, size and weight are not the only considerations. Some vehicles have more crashworthy designs. Vehicle crash-test results are readily available to help you make comparisons. Purchase a vehicle in your chosen size class with good front, side, and rear crash worthiness ratings. Until recently, restraint systems included a head restraint, basic lap/shoulder belts, and front air bags. Advanced frontal air bags now have inflation characteristics geared to specific crash circumstances. Other air bags are installed under the dash, in the doors, in the seats, and in the pillars. The new airbag technology is designed to reduce crash injury from several angles. Anti-lock braking systems (ABS), stability control and other technologies are also featured on many newer vehicles to help you maintain control of the vehicle in poor traction conditions. Be sure that safety and crash effectiveness are high on your checklist when it is time for your next new vehicle purchase. This module is about required safety equipment and introduces new vehicle technologies. The topics that will be addressed include: •
Required Safety Equipment • Traction Control • Suspension Upgrades • Cruise Control • Other Vehicle Technologies If you are planning to buy a new or previously owned vehicle, it is important to be aware of minimal standard safety features that should be present and functional in the vehicle. The National Highway Traffic Safety Administration has mandated Federal Motor Vehicle Safety Standards (FMVSS) and Regulations under the Motor Vehicle Safety Code, which manufacturers of motor vehicle and equipment items must conform and comply with. These regulations state minimum safety performance requirements for motor vehicle types and components. When inspecting a used vehicle you are interested in purchasing, at a minimum, insist the following features are installed and functional: • Head restraints - Designed to absorb the force of a rear-end collision if your head is forced back. Make sure the head restraints are designed to be positioned high (no more than 3.5 inches below the top of the head) and close to the back of the head. • Door locks - Check the mechanisms, especially on a previously owned vehicle to ensure they are all functional. • Trunk and hood latches - Check for damage and functionality. • Seat assembly - Check the attachment assemblies and the installation, especially in previously owned vehicles. Minimize the possibility of seat failure as a result of a collision. • Safety belts - Ensure there is a lap and shoulder safety belt assembly for each seating position. Each belt should have a single point pushbutton release and emergency locking mechanism. If the vehicle has been involved in a collision, make sure the belts have not been stretched. Have them inspected and replaced if necessary. • Child restraint anchorage systems - Check for two lower anchorages and a tether anchorage above (usually on the rear window shelf). Again, if the vehicle has been in a collision ensure the attachment points are secure and mechanically sound. • Air bags - Since 1998, all new cars were required to have front-passenger air bags. According to NHTSA the combination of the front air bag and a seatbelt reduces the risk of serious crash-related head injury by 83%. Ensure the vehicle has front air bags at a minimum. If the air bags have been deployed they should have been replaced. If your budget allows, shop for a vehicle equipped with side or knee air bags as well. Most vehicles have basic safety features that reduce the likelihood of a crash: daytime running lights
•
Rude and obscene gestures
•
Running stop signs and lights
you should anticipate that they might not extend you the proper courtesy. You have just become the vulnerable one! As you approach the vehicle, check for the presence of pedestrians, especially in parking lots. When backing out of a driveway, watch for children playing near or behind the vehicle. As a driver, you are required to give pedestrians the right-of-way at highway intersections, when turning, and upon entering a crosswalk. Pedestrians, in return, are responsible to making themselves seen and maintaining constant awareness of their surroundings (�46.2-924). If a pedestrian enters a controlled intersection when it is safe to do so, but is not able to cross the street before the "Don't Walk" sign appears, the driver must still yield to the pedestrian (�46.2-925). Bicyclists Bicyclists are sharing the roadway more often than ever - they use bicycles to commute, deliver packages, for recreation, and for exercise. Bicyclists are supposed to obey traffic laws and the other rules-of-the-road like other highway transportation system users (�46.2-800). Some bicyclists may ride in the middle of the road or ignore traffic signs. Always be careful when driving near bicyclists. Anticipate how road conditions, the environment, or traffic situation will affect bicyclists' actions. Bicyclists might enter your path without warning, swerve to avoid obstacles, unintentionally fall from their bike, etc. A bicyclist is just as unpredictable as a person driving a car. As you approach a bicyclist, adjust your speed and position. Slow down and create a wide space. Do not pass if the road is too narrow for you to pass safely. Do not pass them if you cannot safely move out of your lane or keep a minimum distance of two feet to the left of the bicyclist (�46.2-839). Be patient and follow them at a distance until it is safe to pass. From a distance, communicate your intentions to pass by signaling with a tap on your horn. Do not get up close behind a bicyclist and use your horn (�46.2-839). Motorcycles are small and difficult to see as they approach you from the opposing direction or from the side. Motorcycles can accelerate very quickly and can make extremely fast maneuvers. The driver has virtually no protection against injury during a crash. When sharing the road with motorcycles, first you need to know they are there. Motorcycles can overtake you quickly from behind. Search for motorcycles at all times, especially before changing lanes, turning, or passing. Every motorcycle must be equipped with at least one front headlight which has been approved by the state of Virginia. The headlight must project a reasonable amount of light to see a person or object up to 200 feet away (§46.2-1012). Because motorcycles are small, it is more difficult to judge their speed. Before changing lanes or maneuvering your vehicle, check the speed of the motorcycle - be sure you and the motorcycle are not about to merge into the same space. Motorcycles have small mirrors. If you are behind or to the side, do not assume the motorcyclist sees you. Motorcycles are entitled to the full usage of a traffic lane, as long as they do not deprive another vehicle of the full usage of a traffic lane. Motorcycles may legally travel side-by-side in a single lane (HB 97). Motorcycles take up a small amount of space in the lane, but they need every bit of the lane in case they need to make a fast, evasive maneuver. Anticipate sudden movements, swerving and quick lane changes without signals. Give the motorcyclist plenty of space and increase that space when the condition of the road is rough, irregular, or slippery as the result of inclement weather. When being passed by a motorcycle, maintain your lane position and prepare to adjust your speed to let it in front of you. If you see a motorcycle rapidly overtaking you from the rear, maintain your lane position until it passes. Don't try to change lanes. All traffic regulations that apply to a person driving a motor vehicle also apply to any person driving a motorcycle. Each year, about 1.5 million animal-vehicle collisions cause about $1 billion in damage, according to the Insurance Institute for Highway Safety (IIHS). When a vehicle collides with a deer or, in some northern states, a moose or elk the average damage is about $2,500, though it can exceed $10,000. According to NHTSA, in 2005 there were 174 fatal crashes and 15,000 injury collisions involving animals and motor vehicles. Deer, Moose, Elk Animal-vehicle collisions can happen any time of year, but autumn is the peak season for deer-car collisions. Deer and other large animals that live in wooded areas are likely to be more active and roam outside of their territory during autumn because it is mating and hunting season. As a driver, there are a few guidelines to help reduce the risk of colliding with a deer, moose, or elk: •
Scan well ahead and far off to the sides of the roadway when you see "deer crossing" signs. • At night, use your high-beam lights, conditions permitting, to illuminate the road's edges. • Conduct extensive visual search in areas near woods and water, especially at dawn and dusk, when these animals venture out to feed. If you see one deer, there may be several others nearby. • Do not flash your headlights. • If there is no vehicle close behind you, brake hard. • If a collision is inevitable, do not swerve to avoid the animal
•
Search to the Sides
•
Sedatives (ludes)
•
Space to the Sides
•
Speed addiction
2.
Speeding
•
Speeding
•
Speeding 20 MPH or more above the posted speed limit (5 years)
•
Standard vision tests are required for drivers who transfer to Virginia with valid driving privileges issued from another state.
•
Stay focused on the driving task.
•
The Leading Causes of Fatalities
•
Surviving the Drive
•
Tailgating
4.
Take frequent breaks. Schedule and plan to stop every two hours, get out, and walk around.
•
The Highway Transportation System
2.
The hand you first used to push then slides down to make further adjustments as necessary.
•
The highest percentage of drivers in fatal crashes who had BAC levels of .08 or higher was for drivers ages 21 to 24.
•
The horn
•
The percentage of drivers with BAC .08 g/dL or above in fatal crashes was highest for motorcycle operators.
however, this becomes even more important in the city. Keep the following tips in mind: •
Think about the time of day you are planning to travel and select a time frame that has the least amount of traffic. • Carry a map with you and plan an alternative route in case you encounter construction or road closures. • Be sure your vehicle is in proper working order and is filled with gas. • Leave early because potential detours and heavy traffic can cause delay. • Plan where you will park. Urban parking is more difficult to navigate to and locate. Also be sure you have money to pay for parking fees. • If you will be traveling on toll roads, watch for signs and have money available within easy reach so you will not be distracted while navigating the toll area. • Travel when the weather is good and you have plenty of daylight. • Decide whether it is better to use through streets or travel on side streets. Side streets may help you avoid traffic, but they may not be as safe and they may increase your travel time because of traffic control lights. • Consider whether it is better to use one-way or two-way streets on your route. Congestion Perhaps the most irritating part of driving in the city is all the traffic that you must share the road with. Plan for traffic jams and delays around rush hour, but also anticipate that congestion will occur for other, unexpected reasons. If you find yourself in heavy traffic demonstrate patience and courtesy. Becoming angry or aggressive will not get you to your destination any sooner. Covering the Brake In all this congestion, you must be prepared to stop or slow suddenly - cover the brake. Your foot will be in position for a sudden stop. Be careful not to actually rest your foot on the brake. This technique is beneficial in the following circumstances: • When you are driving next to parked vehicles • When you see the brake lights of other vehicles • And when you approach signal lights Vehicle Position As a general rule when driving in the city, choose a lane that is not congested or at least less congested than the other lanes. Do not dart in and out of traffic as you make your way to this lane. That practice is a dangerous one. Instead, stay in the lane you have chosen until you need to turn, pass another vehicle, or avoid a hazard. Be sure to plan a lane change well enough in advance so you avoid blocking multiple lanes. Search well ahead and position your vehicle in the proper lane well ahead of a required turn. The position of your vehicle is important. Remember to: • Keep up with traffic speed but be sure to drive within legal limits • Avoid another driver's blind spots • Avoid letting another driver drive in your blind spot • Avoid side-by-side driving • Avoid driving in groups If traffic is heavy and moving slowly, do not enter an intersection until you can travel through it without stopping. Never get caught in the middle of an intersection when the cross-traffic light turns green. If your vehicle blocks traffic, it could trigger road rage
however, the faster you travel, the more distance you cover while bringing the vehicle to a stop. Create a following distance greater than 3 seconds when: •
Traction and visibility are reduced. • A driver behind you is trying to pass. • Following a large truck or vehicle with limited rear vision. • Following a large vehicle that is blocking your view of the road ahead. • Following motorcycles. • Driving on a hill or incline. • You are distracted. Space behind your vehicle is important if you need to stop or slow quickly and it is also the most difficult space to manage. Space behind creates a safeguard or buffer from being rear-ended. To manage space to the rear: • Maintain a steady speed • Communicate your intention to stop or slow by tapping your brakes • Prior to slowing, check your rear-view mirror for vehicles behind you Deal with tailgaters by creating more space in front of your vehicle and change lanes to allow them to get in front of your vehicle. Alcohol-impaired Driving Page 1 of 8 Introduction According to the NHTSA's National Center for Statistics and Analysis, the number of alcohol-related fatalities has declined from 13,041 in 2007 to 11,773 in 2008. Although we have been making progress, alcohol is still the third leading factor for drivers involved in fatal crashes. Even if you do not drink, it is still important for you to understand how alcohol affects driving behavior. Anyone who drives or rides in a vehicle is exposed to drunk drivers. Over the past several years, a great number of resources have been focused on solving the drinking and driving problem. Today more police patrols and roadblocks are used to find and arrest impaired drivers. In many areas in the U.S., impaired drivers may lose their license, pay huge fines, have their vehicle impounded, have the cost of their insurance doubled or tripled, and/or serve time in jail for a first offense. As a host or hostess, you have the responsibility to ensure that your guests do not get behind the wheel after drinking. To help solve the drinking and driving problem, everyone in our society should clearly understand why this combination is so dangerous. It is a fact that alcohol is a key factor in vehicular crashes. Almost every minute, one person is injured in an alcohol-related crash. Over 11,000 people are killed in alcohol-related crashes. About three in every ten Americans will be involved in an alcohol-related crash at some time in their lives. This module is about alcohol-impaired driving. The topics that will be addressed include: • Alcohol-related Traffic Crashes • Alcohol and Driving Behavior • Blood Alcohol Concentration (BAC) • Eliminating Alcohol • Intervention Techniques Alcohol-impaired Driving Page 2 of 8 Alcohol-related Traffic Crashes Alcohol is the deadliest drug when it comes to motor vehicle safety. Alcohol is a depressant that affects judgment, vision, reaction time, and coordination abilities critical to safe driving. Alcohol alters judgment, and under the influence, people take risks they otherwise would not take - this includes driving while impaired. Mixing alcohol with driving is an issue for any age. On average in the U.S., one friend, parent, or family member dies every 48 minutes in alcohol-related crashes. Research conducted by the NHTSA "Traffic Safety Facts" cited that: • Currently, all 50 states have enacted laws making it a criminal offense to operate a motor vehicle at or above a specified alcohol concentration-.08 g/dL. • The highest percentage of drivers in fatal crashes who had BAC levels of .08 or higher was for drivers ages 21 to 24. • In 2008, 16% of child traffic fatalities (ages 14 and younger) occurred in alcohol-impaired-driving crashes. • The percentage of drivers with BAC .08 g/dL or above in fatal crashes was highest for motorcycle operators. Alcohol-impaired Driving Page 3 of 8 Alcohol and Driving Behavior All people are affected by the consumption of alcohol. Drinking too much of any beverage with alcohol will make a person impaired. And no two humans are physically or emotionally the same. In addition, expectations, mood, fatigue, and the combination of alcohol with other drugs can have a synergistic effect and alter or increase the effect of alcohol. Anger, depression, and excitement combined with alcohol increases risk and can be unpredictable. Since alcohol is a depressant, being tired can affect how you react to alcohol. Many medications react with alcohol and some people may be more sensitive than others. When used in combination with alcohol, legal medications and illegal drugs can have serious drug interactions and sometimes fatal effects. Alcohol's Physical Effects on Driving Safe driving requires sound judgment, reasoning and concentration. Drivers need to be focused, see clearly, interpret the situation, and react quickly. Once in the brain, alcohol affects these critical skills - judgment, reasoning, and concentration are all impaired. Alcohol works quickly to distort depth perception. It relaxes eye muscles and affects focus and peripheral vision. Alcohol-impaired drivers are less able to interpret what they see. They make errors in judging speed, have trouble interpreting shapes, and lack muscle coordination. As Blood Alcohol Concentration (BAC) increases, the area of the brain that controls muscular movements begins to slow down - the brain takes longer to process information and react. Muscular reactions become slow
•
Up to 88% of drivers eat or drink
•
Wear sunglasses during the day so your eyes are rested if you have to drive at night.
this is the time nocturnal animals feed and seek water. If you injure a domestic or farm animal on the road, contact the animal's owner. If you are unable to contact the owner, contact an SPCA inspector or police officer no more than 48 hours after the collision. In the event that you hit a small animal, it may need medical assistance. If the animal has been killed, contact your local authorities to remove the animal from the roadway. Sharing the Road with Others Page 15 of 15 Review Do your best to communicate your intentions when there is confusion about the right-of-way. •
Yield to any emergency vehicle that is using its siren and flashing lights. • Signal your intention when turning left at an intersection or when making a U-turn. Yield to all oncoming traffic until there is a gap providing you with sufficient time and space to safely turn. • Yield to all vehicles already traveling in the roadway. • Drivers must yield to pedestrians in marked or unmarked crossings. • Always yield to persons who carry a white cane or have a guide dog, whenever they are in the roadway. • If your lane is blocked, you must yield the right-of-way to other vehicles around you before you prepare a lane change to go around the vehicle blocking your lane. • If your lane is ending, you must yield the right-of-way to vehicles already traveling in adjacent lanes. Light trucks have a high center of gravity which increases their susceptibility to roll over. When you approach a school bus on an undivided roadway, be prepared to stop. When you see the flashing red stop lights, stop before reaching the bus zone and wait for the bus to unload or load. Proceed only after the bus driver turns off the red flashing lights. Watch for children. When traveling behind large trucks, increase your following distance. Avoid traveling in "no-zones" that are ahead, to the sides, and behind large trucks. If you find yourself in one of these areas, maneuver to get out of it quickly so you will be seen by the driver. As you approach a bicyclist, adjust your speed and position. Slow down and create a wide space. Do not pass if the road is too narrow for you to pass safely. Do not pass them if you cannot safely move out of your lane. Be patient and follow them at a distance until it is safe to pass. When being passed by a motorcycle, maintain your lane position and prepare to adjust your speed to let it in ahead of you. If you see a motorcycle rapidly overtaking you from the rear, maintain your lane position until it passes. A few guidelines to help reduce the risk of colliding with large animals include: • Scan well ahead and far off to the sides of the roadway when you see "deer crossing" signs. • At night, use your high-beam lights, conditions permitting, to illuminate the road's edges. • If you see a deer on or near the roadway and think you have time to avoid hitting it, reduce your speed, tap your brakes, and sound your horn to warn other drivers of the hazard ahead. • Do not flash your headlights. • If there is no vehicle close behind you, brake hard. • If a collision is inevitable, do not swerve to avoid the animal, your risk of injury may be greater if you run off the road. Maintain control of your vehicle. Report the collision to the police and your insurance company. An intersection is a point where any two or more roadways intersect or come together. Statistically, an intersection is one of the most dangerous locations within the highway transportation system. In 2008, about 1.7 million urban crashes in the U.S. occurred at intersections (IIHS). Intersections are unforgiving environments. Traffic can be traveling 25-55 mph or faster. Often there is very little time to judge distance and make the right response. When drivers misjudge gaps, lethal outcomes result from head-on and side collisions. Intersections can be very complex and require wide visual scans of rapidly changing situations. As you approach any intersection, you will be faced with many decisions. Manage your distractions, predict the actions of other road users, signal your intentions, and focus on maneuvering through the intersection. This module is about how to approach and manage traffic conflicts that are present in intersections. Topics include: • Types of Intersections • Maneuvering Techniques • Speed and Vehicle Position • Blocked Line-of-sight • Railroad Crossings • There are through or cross-intersections, "T" and "Y" intersections, and traffic circles or roundabouts. Usually intersections have traffic controls to regulate traffic flow, yet some are uncontrolled. As you approach an intersection, quickly assess if the intersection is controlled or uncontrolled. • Controlled Intersections • • Controlled intersections have signs, signals, and/or pavement markings to tell drivers what to do. The most common controlled intersection is one controlled with a stop sign. Yield signs and traffic signals are also used depending on how light or heavy the traffic flows through that particular intersection. If a signal is out on a controlled intersection, police or traffic control officials may be present to "control" traffic through the intersection. They give direction with whistles, flags, and hand signals. Obey their directions. It is illegal to disregard the direction of a traffic control official. • Uncontrolled Intersections • • Uncontrolled intersections do not have any traffic controls to regulate traffic. Typically uncontrolled intersections are located in rural areas or in residential neighborhoods. As you near an uncontrolled intersection, advance intersection signs may be in place to warn drivers of the approaching junction. Some advance intersection signs communicate the type of intersection you are approaching. • Rotary Traffic Islands • • Rotary traffic islands confuse some drivers but they actually are safer environments than cross-intersections. All traffic is going in the same direction. Judging gaps in traffic is easier and driver mistakes are typically not lethal. They present no demand to judge closing speeds of fast traffic. In a traffic island the number of potential conflict points for vehicles and pedestrians is substantially less than in a cross-intersection. There are up to 32 potential vehicle conflict points in a single-lane cross-intersection versus 8 in a single-lane roundabout. In the same cross-intersection for pedestrians, there can be up to 24 pedestrian/vehicle conflict points versus 8 in the roundabout. This is one of the reasons you will begin to see more of these intersections being incorporated into our road system in the future. When passing around a rotary traffic island, you should only drive in a counter clockwise direction around the rotary traffic island-this means that you should not turn left when entering a rotary traffic island. You should only turn right to enter a rotary traffic island correctly (�46.2-807) As you near a controlled intersection search the entire intersection and surrounding area to identify other road users and potential conflicts: • Check your lines of sight to determine if any trees, buildings, or other objects obstruct your full scanning capability. • Check for markings, signs, and signals that control the traffic movement. • If you need to turn, determine if turns are allowed and look for markings or advance channelization signs that give you direction on which lane you need to be in. • Maintain your vehicle's position in your lane. Maneuver through the intersection only when you can do it safely. • If you are turning, signal your intentions and reduce your speed. • Prepare to yield to anyone that is already in the intersection. • Exercise "due care" to avoid colliding with any pedestrian or other vehicle operator. At the intersection, conduct another thorough search sequence. Repeat the search sequence if you are in a busy or confusing situation. Exercise situational awareness - notice the speeds, direction, and intended maneuvers of the others sharing the intersection. If you approach a yellow or red signal in your lane, you are required to slow and stop. • Check your rear-view mirror for traffic behind you. • Tap the brake to communicate to drivers behind you that you are about to stop. • Search for the stop line or crosswalk markings. Plan your stop before these markings or at the edge of the crossroad. • Determine where you want the vehicle to go and bring your vehicle to a smooth stop. After you stop: • Remain stopped and wait for the green signal. Delay your start until you are sure the intersection is clear and there are no potential red-light runners. • Search left, center, right, and left again. Repeat this process if the intersection is not clear enough for you to proceed. During your search, anticipate that others might be entering your intersection after running a yellow light or because they are distracted or inattentive. Always yield to others who are already in the intersection. • Do not allow the front of your vehicle to enter the intersection until it is clear. Often impatient drivers violate the right-of-way by rolling into the intersection before it is clear. How does this impact the driver who thinks they are about to lose the right-of-way? Sometimes they overcorrect and swerve into another lane. At an intersection controlled by a stop sign, yield sign, or flashing red light, yield the right-of-way to any vehicle in the intersection or vehicle approaching from across the road. Uncontrolled Intersections Drivers may not notice uncontrolled intersections. Some uncontrolled intersections have advance intersection warning signs. Many are hidden from the line of sight. Continuous scanning is important to pick up clues that you are approaching an uncontrolled intersection. Look for changes in the environment at the edge of the roadway. Lights, mailboxes, fence corners, and parked vehicles are all indications that you are approaching an intersection. Moving traffic in the intersection has the right-of-way. When approaching an intersection, drivers must yield to any other vehicles approaching on a roadway without traffic controls. As you approach the uncontrolled intersection, adjust your speed and/or position, check for traffic to the rear, be prepared to brake, and plan an evasive maneuver if another driver pulls unexpectedly into the intersection, and into your path. When scanning, identify a large gap that gives you time to turn and accelerate to match the speed of traffic without interruption. If traffic is going fast, increase your search distance and identify a larger gap to enter. Watch for pedestrians, bicyclists and other road users. When you enter traffic from a stopped position, always yield the right-of-way to vehicles, pedestrians, and through traffic already in the intersection or close enough to pose a hazard. Identify your path of travel. Imagine the track or line that you will be driving. Keep your eyes moving and be aware of your entire traffic situation. If your line-of-sight is obstructed in the intersection or beyond, slow down - there may be hidden hazards. If you are in traffic and other vehicles are blocking your view, re-position your vehicle or increase following distance so you can see to react. Railroad Crossings All vehicles carrying passengers for hire, all buses carrying passengers, and all vehicles carrying explosives or flammable liquids must always make a full stop at railroad tracks. These vehicles must stop no closer than 15 feet and no more than 50 feet away from the nearest rail (�46.2-885). If you approach a railroad crossing at which a stop sign is posted, you must come to a complete stop and proceed over the tracks only after looking both ways to make sure a train, or any type of self-propelled or mechanical vehicle is not approaching on the tracks (SB 595). When you are stopped at an intersection, before entering the intersection, scan the intersecting roadways for traffic. If your view is obstructed to the left or right in any direction, your line-of-sight is blocked and risk is increased. This situation can occur when exiting parking lots with many drivers pulling out and in from all directions. SUVs or large vehicles often block your view. Also, trees and hedges are often overgrown and can block your line-of-sight. To reduce conflict at intersections with reduced visibility, proceed as if someone was approaching. Stop at the stop bar, crosswalk, or before the intersection. Do not accelerate. Inch forward very slowly by easing off the brake. Approaching vehicles may honk
•
You have drifted off the road and narrowly missed something.
•
Your vehicle is tall and has substantial weight that is loaded high.
the frequency will be displayed on informational signs along the roadway. Road conditions are also subject to change in areas where there is falling rock and in high elevations where there is snow. Height and Altitude's Effects on Passengers and the Driver Before driving in the mountains, remember to think about how the altitude, motion, and potential vertigo might affect you and your passengers. Is anyone afraid of heights? If so, have them sit away from the edge of the roadway. When they look out they will be seeing the road instead of the distance below. Is anyone prone to motion sickness? Even though your safety belt holds you in position as you drive, the motion of going back and forth and up and down will pull and move you and your passengers around in their seats. Be aware that at very high elevations, above 5,000 feet, there is substantially less oxygen available and you can become tired very quickly. The lack of oxygen at high elevations can also cause shortness of breath, headache, nosebleeds, and an increase in your heart rate. Altitude's Effects on the Vehicle The air is thinner at high altitudes and the change in oxygen levels may affect your vehicle performance. Altitude affects climbing power and you might experience slow acceleration. Because liquids boil and evaporate easily, your engine may overheat. If your temperature light comes on, pull over and let the engine cool off. Turn on the heater to help circulate hot air away from the engine. When you shut off the overheated engine, gasoline can vaporize in the fuel line (this is called "vapor lock"). Allow your engine to cool off and then try to restart it. If you plan to drive in the mountains frequently, have a mechanic adjust your engine for maximum performance in high altitude conditions. This will prevent a condition that will keep your engine from starting until it cools down. As you go into a curve, you can feel centripetal force pulling you toward the outside of the curve. If you are going left, it will pull you to the outside edge of the roadway. If you are going right, centripetal force will pull your vehicle to the center of the road, or possibly into an oncoming traffic lane. Curved roadways vary by the degree of the curve and the slope of the roadway. To maintain traction on a flat road, drive slowly through the curve. A crowned roadway is higher in the center for water drainage. A left curve on a crowned road that is not banked is very dangerous and should be approached with reduced speed. The surface condition can also vary and affect how you need to adjust your speed or position. Watch for advance warning signs that communicate a curve and the suggested speed. These speeds are designated for ideal conditions. Adjust your speed so you enter the curve no faster than the sign indicates. Enter the curve slower than the posted speed if there is reduced traction or visibility. Look ahead for oncoming vehicles entering the curve too fast. Be prepared for an oncoming vehicle to take the curve wide - plan to reposition your vehicle or visualize an escape route. You may be forced to take evasive action. After passing the sharpest point (apex) in the curve, accelerate gently. Stay to the right of your lane while driving through the curve. When you are through the curve, accelerate to a safe speed. Enter a curve slower than the posted speed if: •
Your vehicle is tall, has a high center of gravity, or if it has substantial weight loaded high • Road conditions are slippery or if surface traction is less than ideal • You are entering a blind curve that you cannot see around Blind Curves If you are traveling where there are tight curves that you cannot see around, stay to the right and tap your horn before entering the "blind" curve. Tapping on the horn warns traffic ahead that you are about to enter the curve. This is important when sharing the road with vehicles such as RVs that need to make wide turns to maneuver around tight curves. In this situation, be sure your audio system is off so you can hear other drivers if they signal to you with their horns. Be prepared to stop and yield the right-of-way to other vehicles that are using your lane as they maneuver through a blind curve. You may not pass another vehicle when approaching the crest of a grade or upon a curve in the highway where your view is obstructed so that it creates a hazard if another vehicle might approach from the opposite direction. Passing is one of the most dangerous maneuvers drivers perform. Did you know that there are more than 6,000 head-on crashes every year? Make the decision to pass only if it is legal, safe, and beneficial. Most roads have pavement lane markings that indicate whether you may or may not pass. • It is illegal to pass when there is a solid line on your side of the road. • Passing is permitted if there is a broken line on your side of the road and there are no oncoming vehicles in the passing lane. Passing another vehicle on a two-lane roadway requires you to quickly make critical time, space, and visibility decisions. Judging the speed of other vehicles accurately is one of the most difficult skills in driving. You probably know that it takes more than five to seven seconds to pass another car even if it is traveling slowly. You will need about 10 to 15 seconds to pass another car traveling 30 mph. Did you know that at highway speeds, traveling at 60 mph, you will need about 20 seconds to pass another car traveling 50 mph? During that time you will travel almost 1,800 feet, the length of six football fields! It is critical that you make sure no vehicles are approaching in the oncoming traffic lane and you have enough space to pass safely. When oncoming traffic is present you will need twice as much space. In the situation above you will need about 3,600 feet of clear space - a little over two-thirds of a mile! Many head-on, passing crashes occur because drivers fail to see and accurately judge the speed and distance of approaching vehicles. When you see oncoming vehicles getting closer, it is too close for you to start the pass. Check driveways and side roads ahead to make sure no traffic will be entering the roadway. In the interest of self preservation, you must judge if you have enough room to pass when you approach large vehicles, hills and curves, intersections, and restricted lanes. Passing larger vehicles requires more time and space. At highway speeds of 60 mph you will need an additional five to seven seconds to pass a large vehicle such as a tractor-trailer truck or bus traveling 50 mph. During the 25 to 27 seconds needed to complete the pass safely you will travel 2,250 feet to 2,450 feet. And remember, if oncoming traffic is also traveling 60 mph, you will need almost one mile of clear space in the opposing lane. • Hills and curves: When your vision is limited by a hill or curve, assume that an oncoming vehicle is just out of sight and do not pass! Hills and curves have just as much potential danger as oncoming vehicles. If you are within one-third of a mile of a hill or curve, do not start the pass. • Intersections: Do not pass within 100 feet of any location where other vehicles or pedestrians can enter or cross the road. These locations include intersections, railroad crossings, and entrances to shopping centers. While you are passing, your view of pedestrians, vehicles, or trains is blocked by the vehicle you are passing. • Lane restrictions: Check ahead for road conditions and traffic that could prevent you from passing safely. Pedestrians, cyclists, a patch of ice, broken pavement, or debris in the road could reduce or eliminate your passing safety margin. Most states prohibit passing on bridges, in tunnels, or where traffic is limited to one lane in each direction. It is also illegal to exceed the speed limit even when passing another vehicle. • Bridges: You must not pass another vehicle when approaching within 100 feet of a bridge, viaduct, or tunnel. Do not begin the passing maneuver unless you are certain there is enough space ahead to return to your lane. Never assume you have enough space to pass several vehicles at once and do not rely on other drivers to make space for you to return. Before you return to your original travel lane, make sure you leave at least one second of space between yourself and the vehicle you passed. To accomplish this, make sure you see the entire front end of the vehicle you passed in your rear-view mirror. Before passing, assess the real benefits of performing the maneuver. Is it worth the effort and risk? Being Passed The driver doing the passing has the majority of responsibility for passing safely. If you are the driver being passed, you also have certain responsibilities. Regularly glance in your mirror to ensure you are aware that another vehicle is passing. Do not rely on the other driver to communicate the maneuver by tapping the horn or flashing the headlights. Position your vehicle in the right side of your lane to help the other driver get a better view ahead and allow them more space when passing. Determine if the passing driver is having difficulty completing the pass safely. If so, help the other driver by slowing down. It is illegal to speed up while being passed. Sometimes the passing driver decides not to pass and drops back. If this happens, accelerate slightly to open up space behind you. Rural or country driving involves unique characteristics and risk factors: • Fewer intersections (many hidden or uncontrolled) • Undivided, two-lane roads with oncoming traffic • Limited shoulders and guardrails • Wild animals • Horse-drawn carriages, farm equipment, and other slow-moving vehicles • Fewer vehicles, less traffic • Drivers tend to travel at higher speeds with lower seat belt use • Limited access to advanced medical care (in the event of injuries related to a crash, the average time to reach an emergency care facility in a rural area is 53 minutes versus 37 minutes in an urban area) Slow-moving vehicles such as farm equipment might be blocking your path. Overtake these vehicles only if you have time and space to make a safe maneuver. If it is not safe, back off and wait
•
81% listen to the radio
•
A driver behind you is trying to pass.
2.
Adjust your seat so you can see and easily operate the controls.
•
Adjust your speed and position your vehicle to minimize conflicts.
•
Allow your eyes time to adjust to other low-light conditions such as twilight, fog, or haze.
•
Always read the warning labels completely and carefully.
•
Always stay focused on the task of driving.
•
Among those killed, teenage drivers have the highest death rates per miles driven among all age groups, followed by elderly drivers, and young adult males.
•
Amphetamines (speed)
2.
As soon as the rear of the vehicle ahead of you passes the fixed checkpoint, start counting, "One one-thousand, two one-thousand, three one-thousand."
•
Ask your pharmacist about possible side effects for each medicine or combination of medicines.
•
Assess the conditions of the roadway and your route. Consider the weather, light conditions, traction conditions, construction zones, and possible congestion. Go online and check the traffic and weather forecast.
•
Blurred vision
•
Brakes
•
Buckle up. It is the driver's responsibility to buckle up and ensure all passengers are secured with fastened safety belts or in safety seats.
•
Cocaine (crack/coke)
•
Conduct a thorough visual search. Search 30 seconds ahead of your path of travel for objects or conditions that could become a threat.
•
Consider the probability of a dangerous event developing.
•
Constant yawning
•
Construction zones
3.
Crash severity increases.
•
Crosswalks and roadside areas
•
Currently, all 50 states have enacted laws making it a criminal offense to operate a motor vehicle at or above a specified alcohol concentration-.08 g/dL.
•
Depression
•
Designer Drugs (Ecstasy)
it is also categorized as driving too fast for conditions. 3.
Driving under the influence of alcohol, drugs, and other medication. 4. Failing to yield the right-of-way. 5. Inattention, which includes distractions such as talking, eating, text messaging, etc. 6. Operating the vehicle in an erratic, reckless, careless, or negligent manner. 7. Failing to obey traffic signs or signals. This category includes a driver not signaling the intention to turn or change lanes, a common communication error. 8. Improper driving technique. 9. Making an improper turn. 10. Driving when drowsy, sleepy, fatigued, ill, or after experiencing a blackout. 11. Vision obscured. This may occur due to poor visibility conditions such as rain, snow, glare, or driving into bright lights. Vision obstruction also occurs when your vision is blocked by trees, buildings, or other vehicles. 12. Driving the wrong way on a one-way street. If you can associate these driving behaviors with your driving, recognize that they are the leading reasons for fatalities on our roadways. If you find yourself frequently doing any of the things on this list, remember the leading killer and cause of disabilities of persons age 3-33 is motor vehicle crashes. The Traffic Safety Problem Page 6 of 7 The Social Responsibilities of Driving Injury and death associated with traffic-related crashes are two of our largest societal problems. Drivers depend on each other to obey the rules and driving is also a very social task. Many drivers don't think of that as they get behind the wheel. Some drivers display a lack of courtesy. Courtesy is nothing more than showing respect for the rights and privileges of others using the roadway. It's simply a matter of displaying good manners while driving. It is our social responsibility to pay attention, avoid distractions, and demonstrate "due care." For example, if we are obeying the rules and the other driver isn't, it is still our responsibility to avoid a collision if possible. So, if you see another vehicle running a red light and you can stop or maneuver to avoid hitting it, it is your responsibility to demonstrate "due care." If you see a pedestrian dash in front of you, it is your responsibility to try to avoid hitting the pedestrian. The concepts of defensive driving - "watching out for the other guy" come into play in these types of driving scenarios. Practicing patience is also a must. Many drivers are racing to and from their jobs and other responsibilities in this "time-starved" world we share. It seems as though everyone is in a hurry and because we have more and more vehicles on our already congested roads, it is extremely difficult to exercise patience. A simple solution to avoid becoming impatient is to allow yourself more time for your trip. Leave early and recognize how to control your emotions. We will discuss more about emotions and other driving responsibilities later in the course. The Traffic Safety Problem Page 7 of 7 Review In the U.S., each year approximately 3 million people are injured and around 40,000 people are killed in traffic collisions. Motor vehicle collisions are the leading cause of death for people ages 3 to 33. Among those killed, teenage drivers have the highest death rates per miles driven among all age groups, followed by elderly drivers and young adult males. Every year the cost of crashes exceeds $230 billion. Driving a motor vehicle involves the conduct of skilled and properly timed actions under varying road and traffic conditions based on decisions that depend on: • Learned Information • Realistic Perceptions • Sound Judgments The top 12 causes of fatal crashes. 1. Failing to maintain lane position 2. Speeding 3. Driving under the influence of alcohol, drugs, and other medication 4. Failing to yield the right-of-way 5. Inattention 6. Reckless driving 7. Failing to obey traffic signs or signals 8. Improper driving technique 9. Making an improper turn 10. Drowsy driving 11. Obscured vision 12. Driving the wrong way on a one-way street Traffic engineers and lawmakers have designed the roads, laws, and traffic controls to help drivers anticipate and predict what other road users are about to do. These efforts are in our best interest and reduce the chances of our crashing into each other. In our integrated transportation system all drivers have to depend on each other to follow the rules. Licensing and State Laws Page 1 of 6 Introduction The privilege of operating a motor vehicle carries many responsibilities with it. Understanding the laws and rules-of-the-road and exercising that knowledge with good judgment when operating a motor vehicle will help you prevent collisions. It will also reduce the chances of causing possible harm to yourself and others. Basic laws are in place for all drivers to follow
•
Eye contact
6.
Fasten your safety belt. Tell passengers not to recline in their seats. In the event of a crash, their bodies could slide forward, increasing the chance of injury.
•
Funeral processions. A vehicle with lighted headlights in a funeral procession has the right-of-way at an intersection and may proceed through the intersection if the procession is headed by a lead or funeral escort vehicle displaying flashing red and blue lights, unless the right-of-way is required by an emergency vehicle giving an audible signal (VC 46.2-828).
•
Give yourself more time than you think you will need to complete your trip. Leave early.
•
Hallucinogens
•
Headache
•
Honking to protest another driver's actions
•
If you drive a newer vehicle, use your daytime running headlights (DRLs) to communicate your presence to other road users every time you drive. If you do not have them, always drive with your low-beam headlights on.
•
If you need to change lanes, check your blind spot in the direction you are about to maneuver.
other drivers might think you don't know it is on and not pay attention or may assume you want to turn into a driveway prior to an intersection or corner. By state law, you are required to signal your intention to maneuver well in advance of your maneuver. •
If you drive a newer vehicle, use your daytime running headlights (DRLs) to communicate your presence to other road users every time you drive. If you do not have them, always drive with your low-beam headlights on. Communicate you are passing by using your signals to alert drivers behind you. If you are far enough away, flash your high-beam headlights to oncoming drivers that have their high-beam headlights on. Use your emergency hazard lights to communicate to others that you are in trouble, there is trouble ahead, or when you are moving very slowly. • Recognize how effectively your brakes operate. Have a good feel for the amount of pressure you need to "tap" on your brakes and the amount of pressure you need to apply to slowly decrease your speed and come to a smooth stop. If you see brake lights in a traffic jam ahead, signal to drivers behind by slightly tapping on your brakes. If a vehicle ahead of you activated a turn signal, there is a strong possibility it will be slowing prior to turning. Inform the drivers behind you that they will have to slow down by tapping your brakes. Using your horn can be beneficial or very irritating to other drivers. • Honk when you are approaching a blind curve to warn others that cannot see you coming. • "Tap" on your horn to warn other drivers or pedestrians who cannot see you coming. • Press hard or "lay" on the horn if you see a potential collision about to occur. • Do not use your horn if you are behind a slow moving vehicle. • Do not use your horn to greet other drivers or pedestrians. • Do not use your horn directly behind a bicyclist or a horse rider on the side of the roadway. Use the position of your vehicle to communicate your intentions to change lanes. Position the vehicle in the right side of your lane before turning right and move toward the centerline when you are about to turn left. Use your body to communicate with hand signals. Wave your appreciation and thank other drivers when they give you the right-of-way. Never use obscene hand gestures when driving. Never direct other traffic with hand gestures because you may be liable should a crash occur. Hand signals can be used to supplement or provide extra emphasis on mechanical signals. Standard hand signals are the same for bicycle riders and vehicle drivers. Roll down your left window and use your arm to supplement your signals: • To signal your intention to turn right, extend your left arm out and bend it up at the elbow. • To signal your intention to turn left, extend your left arm straight out to the left, at shoulder height. • To signal your intentions to slow or stop, extend your left arm down to the left side of your vehicle. Eye contact is an effective form of communication. Avoid eye contact unless you are making a courteous gesture. Eye contact is a trigger for road rage when you are communicating a negative message. Communication, if used consistently, can reduce the risk of collision. Turn on your signal well in advance of your maneuver to turn or change lanes. Signal far enough ahead so other drivers in your vicinity can make adjustments to your change in speed and direction. If you see brake lights in a traffic jam ahead, signal to drivers behind by slightly tapping on your brakes. Use your low-beam or daytime running headlights to communicate your presence to other road users every time you drive. Flash your high-beam headlights to other drivers you are behind and about to pass. Flash your high-beam headlights to oncoming drivers that have their high-beam headlights on. Use your emergency hazard lights to communicate when you are in trouble, there is trouble ahead, or when you are moving very slowly. Be familiar with the location of your horn and the pressure required to operate it. Do not use your horn unless it is necessary to warn other road users of a hazardous situation. Using your horn can be beneficial or very irritating to other drivers. Position the vehicle in the right side of your lane before turning right and move toward the centerline when you are about to turn left. Use hand gestures as a courtesy. Never use obscene hand gestures when driving. Avoid eye contact unless you are making a courteous gesture. Eye contact can be a trigger for road rage when you are communicating a negative message. There are basic laws that always apply, with no exceptions. Driver improvement programs require inclusion of the rules-of-the-road as a reminder of our traffic laws: • Buckle up. It is the driver's responsibility to buckle up and ensure all passengers are secured with fastened safety belts or in safety seats. • Obey traffic controls. Follow the regulations and warnings communicated by signs, signals, markings, and other traffic controls. Stay in your lane, do not weave. Stop, yield, and go as directed. • Pass on the left. Pass other vehicles on the left and only when there is time and space to safely conduct the maneuver. On multi-lane or one-way streets, passing or overtaking on the right is permitted. This can be dangerous because it is more difficult for the driver being passed to see you. • Signal your intentions. Always communicate your intention to turn or change lanes by using your turn signal at least 100 feet prior to the maneuver. • Travel at a safe speed. Drive at a speed not greater than or less than what is safe. Make reasonable decisions about traffic, the road surface, and weather conditions that might increase risk or compromise your safety while driving. Based on your speed, maintain enough space in front of your car to allow you to stop without hitting another vehicle or object. Obey the posted speed limit. • Do not tailgate. When following another vehicle, drivers must maintain a reasonable, prudent, and safe distance, considering speed, visibility, road, weather, and traffic conditions. • Do not stop quickly without a warning. When there is time and opportunity to signal, drivers must not stop or suddenly decrease speed without first giving a signal to the driver of any vehicle immediately to the rear by tapping the brakes. Right-of-way Never assume you have the right-of-way
Stimulants: Cocaine: crack, crank, "ice," freebase
Illegal Dizziness, impaired alertness, hallucinations, hyperactivity, decreased ability to concentrate, headaches
•
Importance of Staying Focused
•
Inhalants (fumes)
•
Install large side mirrors, both sides.
1.
It increases the distance a vehicle travels from the time a driver detects an emergency until the driver reacts.
•
Lack of control over the situation. When drivers have no control over their driving environment and are stuck in traffic, the lack of control over the traffic event is frustrating and often leads to anger vented towards a nearby driver. It is the application of the old adage, "frustration leads to aggression."
•
Maintain a smooth, steady speed.
•
Maintain a steady speed
3.
Maintaining a consistent sleep schedule
•
Make sure you get full use of your headlights. If you think your headlamps are not projecting light far enough ahead, have them checked and adjusted if necessary.
9.
Making an improper turn
9.
Making an improper turn.
•
Making illegal turns
•
Managing Distractions You Can Control
•
Managing Risk
•
Managing Speed
•
Managing Your Emotions
•
Markings
•
Page 5 of 8
1.
One hand pushes the steering wheel up in the direction you want to turn. Meanwhile, the other hand slides up toward 12 o'clock and then pulls down.
•
One proof of Virginia residency (i.e. payroll stub or bank statement)
•
Operating a vehicle unsafely
6.
Operating the vehicle in an erratic, reckless, careless, or negligent manner.
•
Opiates (codeine, heroin, morphine)
•
Overtaking another vehicle on the right by driving off the roadway
4.
Put a 10"-12" space between you and the wheel.
•
Pre-drive Checks
•
Predict the chances of a conflict occurring. Anticipate the actions of others. What is the probability that a dangerous event will occur?
•
Realistic Perceptions
•
Reckless driving-driving two vehicles abreast (11 years)
•
Replace your regular mirrors with larger ones.
•
Residential or rural roads with low-hanging trees
a common mistake in emergency maneuvers which can result in running off the road. Excessive speed and wet, snowy, icy, or sandy road conditions combined with abrupt braking, steering, or acceleration could cause a skid. If you experience a skid: •
Respond quickly and do not panic. • Look and steer in direction of the skid. • Make smooth steering corrections. • Do not give up. You may have to make several steering corrections before you regain steering control. Remember, skids are usually caused by driver error. The goal of every driver is to get to their destination safely. Unfortunately, achieving this goal is not always possible. There were 37,261 total automobile-related deaths throughout 2008 (NHTSA). Plan to address these dangerous situations before they arise. Today, drivers on U.S. highways are safer than they have ever been because cars are safer, more people use safety restraints, and stronger safety laws have been enacted. Unfortunately, bad driving behaviors continue and too many people are killed and injured by persons who drive impaired and ride in vehicles without buckling their seat belts. This module contains information about how to reduce the consequences of a crash if one is unavoidable. These driving habits and practices are designed to help you minimize the negative results of a collision. Topics addressed in this module include: • Safety Belts and Air Bags • Child Restraints • Locking Doors and Securing Loose Articles • Minimizing the First Collision • Preparing for a Driving Emergency • Every year the number of licensed drivers, registered vehicles, and miles traveled increases. Surprisingly, over the last two years the number of traffic crashes, injuries, and deaths have declined. NHTSA estimates that 13,250 lives were saved in 2008, over the age of four, by wearing seat belts. Motor vehicle manufacturers continue to make seat belt and air bag design improvements--adding seat belts that self tighten and air bags that deploy from the side. Using seat belts and air bags is definitely in your best interest. Seat belts and air bags are so valuable that every new passenger car sold in the U.S. must have them as standard equipment. Currently 49 of the 50 states have mandatory seat belt use laws. Not wearing your safety belt while occupying the front seat of your vehicle is punishable by a fine up to $25 (VC 46.2-1094). Make this safe driving practice a part of your pre-drive routine. There is no time to buckle up after an emergency begins. In order for seat belts to protect you, you have to buckle them before you start the engine! Fasten the lap belt securely but comfortably across your hip bones. Adjust the shoulder harness so the belt lies across your chest. Properly worn and adjusted seat belts provide comfort and maximum protection. See the vehicle owner's manual for more information. Currently 83% of drivers and passengers wear seat belts. Some believe safety belts and air bags do not work or are not worth the trouble. What do you think the nearly 8,000 people who were not wearing seat belts and died in motor vehicle crashes would do differently? Motor vehicle crashes are the number one cause of death for people ages 2-33. Did you know eight out of ten child safety seats are installed incorrectly? Set a good example for children by buckling up every time you drive or ride in a vehicle. You help them develop a life-long habit when you insist they wear belts also. All 50 states and the District of Columbia have child restraint laws that require children, generally up to age four, to be secured in a federally-approved child safety seat. The benefits of these laws are huge when you consider that the average person will be in at least two motor vehicle crashes during their lifetime. Be sure to read your vehicle owner's manual and child safety seat manufacturer's instructions when installing your child safety seat. Here are some tips to help you select the proper, federally-approved child safety seat: • Rear-facing safety seats are used until the child is one year old and weighs at least 20 or more pounds. If the child does not weigh 20 pounds at one year of age, they must remain in the rear-facing seat until they weigh at least 20 pounds. If the child weighs 20 or more pounds prior to their first birthday, they must remain in the rear-facing safety seat until they are one year old. • Forward-facing child safety seats are used for children older than one who weigh more than 20 but less than 40 pounds, usually children around four years of age. • Booster seats are used for children between four and eight years of age who weigh over 40 pounds, until the lap/shoulder belt fits them properly, usually around 4 feet 9 inches tall. Child safety seats are 71% effective in preventing death to infants, and 54% effective in preventing death to children ages 1-4. Child Passenger Restraint Device Law: Requirements (VC 46.2-1095) • Any person who drives on the highways of Virginia in any motor vehicle manufactured after January 1, 1968, shall ensure that any child between the ages of 8 and 17 (effective 07/01/2010) whom he transports therein is provided with and properly secured in a safety restraint device of a type which meets the standards adopted by the United States Department of Transportation. This law applies to anyone (i.e., parents, grandparents, babysitters, friends) who provides transportation for a child. • Public transportation (taxis, buses), regulation school buses, and farm vehicles are exempt. • The child restraint law is primary enforcement - no other violation need be committed prior to ticketing for failure to have a child in an approved seat. • A $50 civil penalty fine is imposed for failure to have a child in a child restraint device. A $20 civil penalty fine is assessed when persons transporting a child exempted from this law due to medical reasons do not carry a written statement of the exemption. All fines collected go into a special fund to purchase safety seats for low-income families. • There are assistance programs for low-income residents who cannot afford a safety seat. Contact Virginia Department of Health, Center for Injury and Violence Prevention at 1-800-732-8333 for more information. Child Passenger Safety Belts: Requirements (VC 46.2-1095) • Any person transporting any child between the ages of 8 and 17 (effective 07/01/2010), shall ensure that such child is provided with and properly secured by an appropriate safety belt system when driving on the highways of Virginia in any motor vehicle manufactured after January 1, 1968, equipped with a safety belt system, consisting of lap belts, shoulder harnesses, combinations thereof or similar devices. This seat belt law is also primary enforcement, and a $50 civil penalty fine will be imposed for failure to have a child correctly buckled up. • The safest place for all children to be is properly restrained in the back seat. Children should never ride in the front seat of a vehicle equipped with a passenger-side air bag, unless the air bag can be deactivated by a safety switch. Research has shown that young children can sustain serious injuries from an air bag which deploys in low-speed crashes. • Purchase only new child passenger restraints. Used restraints may have cracks and may have experienced structural stress that you cannot see as a result of being in a crash. It is a good idea to replace seats every five to six years or after a moderate to severe crash. If you are involved in a rollover or side collision, locked doors are less likely to open, thereby decreasing the chance of the occupants being ejected. Studies show that people are less likely to sustain serious injuries if they are restrained inside the vehicle than when they are thrown clear. People are not the only things that need to be restrained in a collision. For example, in a head-on collision, items on the rear window shelf will fly off becoming lethal projectiles (remember that objects in the vehicle will continue to move with same quantity of momentum). Articles that have been placed on the backseat can be just as hazardous as those on the shelf. The best place to secure valuables and larger items is out of sight in the trunk. This will decrease your chance of injury as well as deterring break-ins and theft. You can place small items on the floor behind the front seat. Collisions can occur at points all around your vehicle - from the sides, rear, and in the front. You can collide with stationary obstacles or moving objects, or be involved in a multiple vehicle collision. Your vehicle could possibly malfunction or you could be the cause. Other drivers can cause crashes and sometimes the road itself can contribute to a collision. Sometimes collisions are unavoidable. For example, when driving, you have little control over what is happening behind you. Often, when you are stopped, a rear-end collision can occur because the other drivers are not paying attention. Side-impact collisions are extremely dangerous and often cause serious injury because the passenger compartment takes a direct hit. Being involved in a head-on collision is the worst type of collision in which to be involved. The reason is this type of crash generates extreme collision forces during impact. Serious injury and death are much more likely to occur in head-on collisions versus the other types previously mentioned. Choose What to Hit If a collision is unavoidable and you have a choice of objects to hit, strike the object that is going to result in the least amount of impact force. If you strike a stationary object choose something that gives, such as a bush or some other small, soft object capable of absorbing energy. Hit Something Going Your Way If you strike a moving object, choose one traveling in the same direction that you are traveling. Hit Something with a Glancing Blow You can minimize crash consequences by hitting an object at an angle versus head-on. For example, many collisions have been classified as minor because the vehicle sideswiped a guardrail, bounced off, and the driver maintained control. Choose How to Hit If you cannot avoid a crash with another vehicle at an intersection, adjust your speed and steer so you can hit, or be hit, at or behind the rear wheels. These actions greatly reduce impact forces and allow the struck vehicle to spin instead of absorbing the force of the vehicle that strikes it. Choose Where to Collide If you have a choice between a head-on collision with another vehicle or striking some stationary object off-road, impact forces will probably be less if you choose an off-road path. If possible steer to the right side of the road and take evasive action. Steering left to avoid a collision is more apt to bring you into the path of oncoming traffic. A number of factors contribute to traffic crashes. Many collisions are more serious than necessary because drivers are unaware that a collision is about to happen - they panic and do the wrong thing, or freeze and do nothing at all. Knowing what to do to minimize the consequences of a crash, and being able to do it, are two different things. Seldom do you get the chance to practice dealing with real emergencies. However, you can practice some of the fundamentals. You can practice making quick stops and quick turns in places where there is no traffic. In the winter, you may be able to find a place to practice controlling and recovering from skids. In addition, if you drive a vehicle equipped with an anti-lock brake system (ABS), find a safe place to apply hard brake pressure when traveling 25-30 mph so that you can experience the pulsation of the brake pedal that occurs when the brakes are suddenly applied hard in an emergency. When you cannot actually practice things physically, you can practice them mentally. When you are driving along, practice "what-if" scenarios in your mind. What would you do if you suddenly had a blowout? What if an oncoming car suddenly pulls into your lane or your brakes fail? Mental practice can help you to react correctly and quickly when a real emergency happens. Be prepared for the unexpected, plan ahead, and you should arrive at your destination safely. Every year the number of licensed drivers, registered vehicles, and miles traveled increases. Surprisingly, over the last two years the number of traffic crashes, injuries, and deaths has declined. NHTSA estimates that from 1975 through 2005, safety belts saved 211,128 lives, including 15,383 lives saved in 2006. Use the safety equipment installed in your vehicle. Be sure that you and your passengers buckle up before putting the vehicle in motion. Ensure all children are properly secured: • Secure them with a car seat or by a safety belt in the back seat. • Do not put a small child in the front seat of a vehicle equipped with passenger side air bags unless the vehicle has a safety switch to deactivate the bag. Make sure you secure all loose objects inside a vehicle. There are ways to minimize the consequences of a vehicular collision such as being alert at all times, preparing to maneuver, and taking the brunt of the collision on the rear portion of your vehicle. If you have a choice of what you are going to hit in a crash, hit the object that will transfer the least force. The worst type of collision to be in is a head-on collision. Roadside emergencies and collisions happen suddenly. If an event should occur, here are several tips that can help you to be equipped to handle the situation. If your vehicle breaks down or you are involved in a collision, it is often difficult to remain calm and focused. This module will present guidelines to help you travel with the necessary knowledge to act quickly and with confidence in an emergency. These guidelines are developed by law enforcement officials, emergency responders, and traffic safety professionals and can assist drivers in emergency situations. Topics that are covered include: • Emergency Toolkit • Approaching an Emergency Scene • Roadside Breakdowns • After a Collision • Replacing Restraint Systems After a Collision Carry a cell phone to communicate emergency situations or to call for help. Also keep supplies in your vehicle that will assist you in the event of an emergency breakdown or crash. Assemble an emergency toolkit to include: • First-aid kit • Gloves (both latex and work) • Hand tools • Pocket knife • Flares (warning triangles or reflectors) • Blanket • White flag or cloth • Bottled water • Flashlight with extra batteries • Jumper cables In cold climates, add these items to your toolkit: • Appropriate protective clothing • Shovel • A small supply of non-perishable food • Kitty litter or sand • Ice scraper, snow brush Be prepared to record an accurate account of an emergency event for the police and your insurance company. Keep a pen and notebook along with a disposable camera in the same location you store your proof of insurance and registration. If you can see warning triangles, flares, a vehicle's hazard lights, or emergency vehicles ahead, slow down. You may be approaching the scene of a collision. Warn drivers behind you by turning on your emergency flashers or tapping your brake pedal quickly three or four times. Avoid driving near collisions if possible, watch for pedestrians and do not slow down more than necessary or stop just to look - this common curiosity causes other collisions and interrupts traffic flow. Because of the high speed, erratic maneuvers, and hazards present, the space around dispatched emergency vehicles is a very high risk area for all nearby drivers. It is against the law to follow closely behind any fire engine, police car, ambulance, or other emergency vehicle with a siren or flashing lights. If you are the only one on the scene, call 911. DO NOT move any victims unless they are in immediate danger of sustaining life threatening injury. In the event of a roadside breakdown, it is important to remain calm and attempt to prevent further risk of damage or injury to yourself or others by moving the vehicle out of the roadway. If you are having car trouble, and need to stop, but are still able to drive slowly: • Turn on your emergency flashers. • Maneuver to the right lane and locate a wide shoulder where there is clear visibility from behind and if possible, all other directions. • Use the shoulder to drive to the nearest exit or other location where it is safe to park. If you cannot make it to an exit, park as far from the travel lane as possible. • If you park in tall dry grass on the roadside, watch for potential fire that could be caused by heat from your exhaust system. • If you are unable to get safely to the right side of the road, park on the left in a clearly visible area. • Set out warning triangles and flares and return to your vehicle. • Call for roadside assistance and wait for help in a safe place. This may be outside the vehicle and away from traffic. If your vehicle is in a safe location, clear of traffic: • Lock the doors and wait for your roadside service provider. • Do not open your doors to strangers that want to assist you. Have them call for help if you have not already done so. If there is smoke, fire, or limited visibility: • Quickly exit the vehicle if you see smoke or fire, or if other drivers are not able to clearly see your disabled vehicle. • Exit the vehicle away from the traffic lane. • As you walk away from the vehicle, walk as far away from the traffic lane in the direction traffic is approaching you - walk towards traffic that might strike your broken down vehicle. As a pedestrian, do not position yourself in harm's way of a potential collision. • Wait in a safe location. If you lose engine power or control and cannot get completely off the road: • Turn on your emergency flashers. • Stop where people can see you and your vehicle from all directions - especially from behind. • Exit the vehicle if you are in danger of being struck by moving traffic. • Call for roadside assistance. • Set out warning triangles or flares only if it is safe to do so. • Wait in a safe location for assistance. • Remain calm and turn on your hazard lights. Do not leave the scene unless a medical emergency requires you to do so. • Call 911 and request police or medical assistance. Be prepared to tell the 911 operator your specific location and the condition of the individuals involved. • If the vehicles are still operational, move the vehicles out of traffic, as far off the roadside as possible. If you are involved in a collision, you must stop and provide information to any other people involved. It is a serious crime to leave the scene and can result in the suspension of your driver's license. • Turn off the ignition switches in each damaged vehicle. • Stay away from traffic and do not cross any expressways on foot. • If your vehicle is in a safe location and is clearly visible to oncoming traffic, communicate your situation to other road users. Set out flares and warning triangles. Location of Flares and Triangles On a one-way or divided highway, the first warning device should be placed approximately 200 feet behind your vehicle. The second device should be placed approximately 100 feet from the rear of the vehicle. Place the third device about 10 feet from the rear of your vehicle. On a two-way or undivided highway, position one device 100 feet behind your vehicle and one device 10 feet behind your vehicle. Place another device 100 feet in front of your vehicle. If your vehicle breakdown occurs where there is an obstructed view, such as a hillside or curve, place one device 100-500 feet behind your vehicle and one 10 feet behind your vehicle. Flares are the most visible warning you can give other drivers
•
Risk addiction
•
Road conditions are slippery or if surface traction is less than ideal.
and 2% are rated above 600. If your brakes fail, it is an emergency situation that requires quick and decisive actions. Follow these procedures: •
Shift to a lower gear to decrease the speed of the vehicle. • Pump the brake pedal in an attempt to restore pressure to the brake system. If pressure is restored, stop pumping. • If this technique does not restore your brakes, use the parking brake to aid in slowing and stopping the vehicle. Be careful
•
Shining high-beam headlights in retaliation
•
Signals
•
Sound Judgments
•
Stimulants
•
Stopping Distance
•
Stopping or slowing of your vehicle unsafely
•
Stress
•
Substantial visual field of view
•
Successfully complete a written knowledge test based on the information contained in the Virginia Driver Manual
•
Successfully pass a roadway skill test with a DMV driver examiner in a vehicle provided by the applicant
•
Successfully pass a standard vision screening test
•
Tense muscles
2.
The 8 and 4 o'clock hand position is a lower, more restful position. The driver's arms stay close to the body and allow the body to be in a more upright and stable position.
•
The Social Responsibilities of Driving
•
The number of injuries and deaths due to collisions is considered to be of epidemic proportion. In 2008, 37,261 people lost their lives and 2,346,000 were injured in motor vehicle crashes (NHTSA).
•
There are different driving environments and unfamiliar roads, which require you to be alert and attentive.
5.
Traction and maneuverability are reduced.
•
Vision is reduced.
if you do, your tires might grab unexpectedly and you could lose control. •
When both front tires are on the paved surface, counter-steer immediately
•
When you are running late, do you tailgate slow moving vehicles?
•
When you have identified a safe gap, change lanes.
•
When you have to slow or stop quickly.
•
When you prepare to turn into a side road or driveway, especially if the driveway is just before an intersection.
•
Who are judged by the court to be mentally incompetent
•
Who are unable to understand highway warnings or direction signs written in the English language
•
Wireless devices
•
You are behind the wheel for a greater distance and time than you are normally used to.
•
You are easily distracted.
•
You are entering a blind curve that you cannot see around.
3.
You are more likely to keep both hands on the steering wheel allowing the muscles of the chest, back and shoulders to do most of the work.
•
You don't remember driving the last few miles
•
You hear the noise of rumble strips or lane markings.
2
.08 .06 .05 .05 .04 .04 .03 .03 Driving
2
.09 .08 .07 .06 .05 .05 .04 .04 Driving
3
.11 .09 .08 .07 .06 .06 .05 .05
3
.14 .11 .10 .09 .08 .07 .06 .06
5
.19 .16 .13 .12 .11 .09 .09 .08
6
.27 .23 .19 .17 .15 .14 .12 .11 Legally
8
.30 .25 .21 .19 .17 .15 .14 .13
7
.32 .27 .23 .20 .18 .16 .14 .13
10
.45 .38 .32 .28 .25 .23 .21 .19
•
16 years, 3 months, if you have held a valid driver education learner permit for 9 months and have successfully completed a DMV-approved driver education course
•
18 hours awake = same effect as .07 blood alcohol concentration
do not just clear the windshield (you need to be able to see in all directions).
Adverse Driving Conditions Page 5 of 9 Managing Visibility in Adverse Weather Rain, snow, and fog impair visibility and make it difficult to see the road and obstacles. If there is a significant temperature difference between the outside and inside of your vehicle, moisture will accumulate on the inside of your windshield and on your windows-making it more difficult for you to see. Always clean your windows and windshield, inside and out before you drive in any reduced visibility situation. To "be seen" by other road users, clean or remove dirt and dust from the outside of your headlights and signal lights. Carry window cleaner and some paper towels, plus a snow brush and ice scraper in winter. Secure these items in your cargo area. If you live in an area that has temperatures below freezing, make sure your windshield washer fluid contains an additive that prevents it from freezing. Rain will affect your ability to see and be seen. Turn on your windshield wipers as soon as you encounter rain. Make sure your headlights are on. Watch for oncoming drivers who have not yet turned on their lights
•
Any driver whose license was suspended for more than 5 years will be considered a new driver.
this will reduce the force of impact. If you detect that your brakes are beginning to fade or do not seem as effective after prolonged use, pull off the road, park, and let the brakes cool. If you drive through water the brakes may become wet, slippery, and ineffective. To dry the brakes off, apply your brakes gently as you accelerate - this will create friction and dry them off. Increase your speed and test the brake stopping power. If necessary, repeat the procedure. If the accelerator malfunctions or sticks, you quickly lose control of the vehicle's speed. If your accelerator does not return to an idling speed when you release pressure, the accelerator may be "stuck." If you encounter an accelerator-related problem, follow these procedures: •
Apply the brakes. • Shift into NEUTRAL. This may ruin your engine or transmission, but this action may also prevent a collision. (If you have a manual transmission, depress the clutch which removes power being transferred to the wheels). • Scan ahead and to the sides for an escape path. • Steer down your selected escape path and continue to use your brakes until you are safely off the roadway. • Shift to PARK, turn off the ignition, and apply the parking brake. • Turn on your emergency flashers. • If you have a cell phone, use it to call for roadside assistance. Do not attempt to fix the problem or malfunction until after you safely bring the vehicle to a stop on the side of the roadway. Test the operation of the pedal before you continue to drive. If the problem persists, have it repaired before driving again. Would you know what to do to avoid a collision and get off the road if the hood of your vehicle suddenly flies up while you are driving? Here's how to handle this emergency: • To get a view of the road ahead, lean forward and look through the space between the dashboard and the hood. Roll down the side window and look around the hood if this view is limited or blocked. Look and steer in the direction you are moving. • Check your mirrors for traffic behind, and check traffic on both sides of your vehicle. • Maintain your lane position, select a gap in traffic, signal, and steer off the road. • The vehicle's engine provides the power required to move the vehicle across the surface of the road. Your engine should always operate smoothly with no strange or irregular noises. If you suddenly lose power, be prepared to steer out of danger without braking. Pull off the road as soon as it is safe and DO NOT drive if your oil pressure warning light is illuminated. If you detect a fire, exit the vehicle as soon as it is safe to do so. If you lose your headlights, concentrate on "being seen" and getting off the road as quickly as possible to a safe location. If you lose steering, safely leave the traffic stream, and if that is not possible, use the parking brake to quickly slow and stop the vehicle. Tire failure can occur suddenly and without warning. A "blowout" occurs when a tire suddenly loses all of its air pressure. DO NOT brake hard
it is just too dangerous to consider. There are so many other people who do not obey the rules that the risk of sharing the road with an impaired driver is already high enough. Remember three in every ten Americans will be involved in an alcohol-related crash at some time in their lives. Men
Approximate Blood Alcohol Percentage Drinks Body Weight in Pounds 100 120 140 160 180 200 220 240 0 .00 .00 .00 .00 .00 .00 .00 .00 Only Safe Driving Limit 1 .04 .03 .03 .02 .02 .02 .02 .02 Impairment Begins 2 .08 .06 .05 .05 .04 .04 .03 .03 Driving Skills Affected ------ Possible Criminal Penalties 3 .11 .09 .08 .07 .06 .06 .05 .05 4 .15 .12 .11 .09 .08 .08 .07 .06 5 .19 .16 .13 .12 .11 .09 .09 .08 6 .23 .19 .16 .14 .13 .11 .10 .09 Legally Impaired ----- Criminal Penalties 7 .26 .22 .19 .16 .15 .13 .12 .11 8 .30 .25 .21 .19 .17 .15 .14 .13 9 .34 .28 .24 .21 .19 .17 .15 .14 10 .38 .31 .27 .23 .21 .19 .17 .16 It takes around one hour for your body to get rid of one drink. One drink is 1.5 oz. of 80 proof liquor, 12 oz. of beer, or 5 oz. of table wine. Men Approximate Blood Alcohol Percentage Drinks Body Weight in Pounds 100 120 140 160 180 200 220 240 0 .00 .00 .00 .00 .00 .00 .00 .00 Only Safe Driving Limit 1 .04 .03 .03 .02 .02 .02 .02 .02 Impairment Begins 2 .08 .06 .05 .05 .04 .04 .03 .03 Driving Skills Affected ------ Possible Criminal Penalties 3 .11 .09 .08 .07 .06 .06 .05 .05 4 .15 .12 .11 .09 .08 .08 .07 .06 5 .19 .16 .13 .12 .11 .09 .09 .08 6 .23 .19 .16 .14 .13 .11 .10 .09 Legally Impaired ----- Criminal Penalties 7 .26 .22 .19 .16 .15 .13 .12 .11 8 .30 .25 .21 .19 .17 .15 .14 .13 9 .34 .28 .24 .21 .19 .17 .15 .14 10 .38 .31 .27 .23 .21 .19 .17 .16 It takes around one hour for your body to get rid of one drink. One drink is 1.5 oz. of 80 proof liquor, 12 oz. of beer, or 5 oz. of table wine. Women Approximate Blood Alcohol Percentage Drinks Body Weight in Pounds 100 120 140 160 180 200 220 240 0 .00 .00 .00 .00 .00 .00 .00 .00 Only Safe Driving Limit 1 .05 .04 .03 .03 .03 .02 .02 .02 Impairment Begins 2 .09 .08 .07 .06 .05 .05 .04 .04 Driving Skills Affected ------ Possible Criminal Penalties 3 .14 .11 .10 .09 .08 .07 .06 .06 4 .18 .15 .13 .11 .10 .09 .08 .08 5 .23 .19 .16 .14 .13 .11 .10 .09 6 .27 .23 .19 .17 .15 .14 .12 .11 Legally Impaired ----- Criminal Penalties 7 .32 .27 .23 .20 .18 .16 .14 .13 8 .36 .30 .26 .23 .20 .18 .17 .15 9 .41 .34 .29 .26 .23 .20 .19 .17 10 .45 .38 .32 .28 .25 .23 .21 .19 It takes around one hour for your body to get rid of one drink. One drink is 1.5 oz. of 80 proof liquor, 12 oz. of beer, or 5 oz. of table wine. Alcohol-impaired Driving Page 6 of 8 Intervention Techniques Most people who drink, drink to relax or have "fun." This is called recreational drinking. Drinking in excess or frequently to obtain the side effects of alcohol is classified as alcohol abuse. The third reason for drinking is classified as "experimentation," which is typically associated with teenagers who have not yet experienced the effects of alcohol on their own system. Unfortunately, most people have a limited knowledge about alcohol and how it impacts their judgment and health. Regardless of the reason, the effects of alcohol are unpredictable. The Host As a host, do not keep everyone's glass full and do not expect your guests to drink to excess in order to enjoy themselves. Serve amounts that are comparable to what would be served in a bar. Your guests need to understand how much alcohol they are consuming in the drinks you have prepared. Try to monitor and control the amount being consumed. Serve high protein or high starch foods which slow the absorption of alcohol. It is everyone's social responsibility to keep drinkers from driving. Establish designated drivers or carpools in advance. Try to include non-alcoholic beverages and non-drinkers at social gatherings. Ask the non-drinkers if they can provide transportation. Responsible adults should limit their alcohol consumption. Preventing drinking and driving situations is not always easy. Rely on your best judgment and call a cab if you or your driver has been drinking. As a host, be prepared for overnight guests just in case someone needs to stay over. Consider the potential legal liabilities for providing alcohol to guests and make an informed, safe decision. Alcohol-impaired Driving Page 8 of 8 Review Alcohol enters the bloodstream very quickly and begins to affect the body almost immediately. It is quick to find its way to the brain because the brain contains more blood than any other organ. The amount of alcohol present in the bloodstream is called blood alcohol concentration (BAC). Many factors can affect an individual's BAC - such as gender, weight, number, and size of drinks. Typically, one drink equals one 12-ounce beer, a 5-ounce glass of wine, or one shot. The male liver takes about one hour to process one drink. Alcohol-impaired drivers are less able to interpret what they see. They make errors interpreting shapes, have altered depth perception, and experience difficulty in judging speed. Never ride with an impaired driver. If intervention is not working, call a cab. In 2008 in the U.S., over 11,000 people died in alcohol-related crashes. That's one every 45 minutes or an average of 32 per day (The Center for Disease Control). Consider how many drivers you know that operate their vehicle under the influence of over-the-counter, prescription, and/or illegal drugs. The use of almost any drug will have an effect on driving performance. Drugs are designed to alter specific body functions and consequently can alter the ability to perceive, make sound judgments, and react quickly. The majority of drug users are under the influence of legal drugs such as medicine for colds, a headache, muscle or joint pain. Less than 5% of the population uses illegal drugs. Everyone's Body is Different If you have prior experience with a drug and its reactions, do not assume it will react the same, especially if you take additional medication. How a drug interacts with your body depends on the dosage, other drugs, food intake, and body weight/metabolism. Taking medicine can cause driving problems such as: • Lengthened reaction time • Reduction in your mental or physical abilities • Intense or unexpected reactions If you are taking over-the-counter or prescribed medication, read the warning labels and follow the instructions given to you by your doctor or pharmacist. Inform your doctor of all medications you are taking. When you have this discussion, if applicable, be honest about the amount of alcohol being consumed while taking the drug. Combinations of medicine can produce unpredictable and strong side effects that make it hazardous for you to drive. This module addresses the risk associated with drug-impaired driving. Topics include: • Types of Drugs • Physiological Effects of Drugs • Dangers of Combining Drugs • Dangers of Drug-impaired Driving • Avoiding Drug-impaired Drivers Types of Drugs With all medication, it is important to know what you are dealing with. Here is a quick review of the types of legal and illegal drugs and their effect on the body. Legal drugs include non-prescription (over-the-counter) or those requiring a doctor's prescription. Legal drugs are tested for safety and are labeled with consumer warnings. The categories or types of drugs include: • Depressants • Stimulants • Narcotics • Hallucinogens Depressants affect the central nervous system by slowing down or "depressing" reflexes and coordination. Depressants include: • Alcohol • Analgesics (pain pills) • Anti-diabetics (sugar medicine) • Barbiturates (downers) • Sedatives (ludes) Stimulants "stimulate" or speed-up the central nervous system. They increase heart rate and generate a false sense of alertness and well-being. Stimulants include: • Nicotine (tobacco) • Caffeine (soft drinks, chocolate, coffee) • Amphetamines (speed) • Designer Drugs (Ecstasy) • Cocaine (crack/coke) Narcotics are strong depressants that are often prescribed for severe pain. They act to shut down the central nervous system. Narcotics include: • Opiates (codeine, heroin, morphine) Hallucinogens alter the mind. They change the way the mind perceives, processes information, and reacts. They are unpredictable and illegal. Hallucinogens include: • Cannabis (marijuana, pot) • Lysergic Acid (LSD/acid) • Mescaline and Peyote (mesc) • Phencyclidine (PCP) • Inhalants (fumes) • Psilocybin (shrooms) Drug-impaired Driving Page 3 of 8 Physiological Effects of Drugs Drugs alter body chemistry. Prescription drugs and non-prescription drugs have been developed by pharmaceutical companies and approved for public consumption by the Food and Drug Administration. Legal drugs have been tested for reactions and side effects before going on the market. Side effects vary and may include: • Drowsiness • Blurred vision • Sensitivity to bright light • Muscle ache • Nausea • Slowed reaction time All of these side effects alter a driver's performance. The list of drug-related side effects is endless and can vary depending on the individual. Never assume you will not react differently or will not be adversely affected after taking some type of drug. Legal drugs carry warning labels. The issuance of prescription drugs requires the pharmacist to tell you how and when to take the drug and what to do if there are side effects. Warning labels also carry specific instructions, such as: "Do not operate heavy machinery or equipment while taking this medication." As a driver, if you take medication, read the label and know what is in your system. Before driving, conduct an inventory of how you are thinking and feeling. If you are experiencing any "side effects" that affect your vision, thinking, or reaction time, do not drive. Drug-impaired Driving Page 4 of 8 Dangers of Combining Drugs Combining different drugs may cause a more intense effect than if you only take one drug at a time. This effect is called synergism and is unpredictable and extremely dangerous. Just like any chemical reaction, chemicals might be stable alone, but when mixed, a dangerous chemical reaction can occur. If you combine similar drugs, for example, two depressants, the effect of combining two might be similar to taking three. This is especially true with alcohol. The same is true for combining drugs that have opposite effects. You may have different reactions to the individual drugs. Many over-the-counter (OTC) medications have side effects that can include drowsiness, dizziness, slowed reaction time, and poor judgment. These tips will help you handle OTC and prescription medications safely: • Tell your doctor about every drug you are taking, including OTC medicines and those prescribed by other doctors. • Ask your pharmacist about possible side effects for each medicine or combination of medicines. • Ask how these side effects may affect your driving. • Always read the warning labels completely and carefully. • Never take more of any drug than is prescribed. • Never take a drug prescribed for someone else. If you must drive after taking any medication, be extra careful. Almost any medicine can affect your driving. Never combine drugs without consulting with your physicians, and only use them as directed. Drug-impaired Driving Page 5 of 8 How Drugs Affect Your Ability to Drive Types of Drugs - Examples Source Known Side Effects Amphetamines (diet pills, pep pills): Benzedrine, Dexedrine Prescription for fatigue and mild depression Dizziness, hallucinations, hyperactivity, decreased ability to concentrate, headaches Painkillers - Analgesics: Aspirin, Excedrin Over-the-counter Bleeding in stomach and intestines Antibiotics - For infection: Penicillin Prescription for infection Nausea Allergy and Cold Pills - Antihistamines: Benadryl, Dramamine Prescription and over-the-counter Drowsiness, dizziness, confusion, inattention Sedatives - Barbiturates: Seconal, Nembutal Prescription for insomnia, high blood pressure, epilepsy Drowsiness, impaired judgment, impaired reflexes Anti-anxiety - Benzodiazepines: Valium Prescription for mild anxiety Blurred vision, drowsiness, fatigue Tranquilizers - Librium, Valium Prescription for severe anxiety and emotional problems Blurred vision, drowsiness, fatigue, faintness, vomiting, tremors, dizziness Narcotics - Cough syrup and painkillers: Morphine, Codeine, Demerol, Tylenol with Codeine Prescription for pain, cough suppressant and insomnia Nausea, blurred vision, drowsiness, impaired concentration Alcohol - Beer, wine, liquor Regulated sales, age restrictions Impaired judgment, concentration and reasoning, nausea, blurred vision, drowsiness Marijuana and Hashish Illegal Distorted depth perception, impaired coordination, depression, panic, fear, hallucination Hallucinogens - LSD, PCP, mescaline Illegal Impaired senses, hallucination, panic, depression Stimulants: Cocaine: crack, crank, "ice," freebase Illegal Dizziness, impaired alertness, hallucinations, hyperactivity, decreased ability to concentrate, headaches Dangers of Drug-impaired Driving Most state vehicle codes state that you shall not drive a motor vehicle after taking a substance which alters the central nervous system. This includes over the counter, prescription, and of course, illegal drugs. The following categories of drugs have known side effects that include impaired attention, reaction time and vision: Depressants slow the brain's processing ability to perceive and also slow the muscle response or reaction time. Stimulants temporarily excite and accelerate the central nervous system. Over stimulation can cause aggressive behavior. Narcotics depress the central nervous system. They slow down the brain's ability to process information and react. Cold medicines can also have serious side effects that impair driving. Read all warning labels carefully and follow the instructions. Most suppress cold symptoms and therefore the "side effects" slow the driver's ability to think and react quickly. Reference the following chart to help recognize common drugs, their source and how they can impact your ability to drive safely. Drug-impaired Driving Page 8 of 8 Review Drugs are designed to alter specific body functions and consequently can alter the ability to perceive, make sound judgments, and react quickly. The categories or types of drugs include: • Depressants • Stimulants • Narcotics • Hallucinogens Depressants affect the central nervous system by slowing down or "depressing" reflexes and coordination. Your ability to focus and respond quickly is impaired. Sedatives are a type of depressant. Stimulants "stimulate" or speed-up the central nervous system. They increase heart rate and generate a false sense of alertness and well-being. They excite and accelerate the central nervous system. Moderate amounts may produce blurred vision, hallucinations and paranoia. Narcotics are strong depressants that are often prescribed for severe pain. They shut down the central nervous system. They can produce a wide variety of side effects including nausea, dizziness, and vomiting. Drivers also may experience slowed reaction time and drowsiness. Hallucinogens alter the mind. They change the way the mind perceives, processes information, and reacts. Combining different drugs and alcohol may cause a more intense effect than if you only take one drug at a time. This effect is called synergism and is unpredictable and extremely dangerous. Never combine drugs and use legal drugs only as recommended. Watch for indications that other drivers might be impaired: • Erratic changes in speed • Weaving from side to side • Traveling in the wrong lane • Running stop signs and lights Distance yourself from the impaired driver by increasing the amount of space between you and the other vehicle. Have you ever nodded off while driving and snapped awake without remembering what just happened on your journey? The National Highway Traffic Safety Administration (NHTSA) estimates that there are 100,000 police-reported crashes resulting in 1,550 deaths and 71,000 injuries annually as the result of drowsy driving. 62% of drivers drive when they are tired. 50% of fatal crashes involve single vehicle collisions where the vehicle travels off the road, rolls over, or collides with a fixed object. 40% of adults are so tired that it interferes with their daily activities. Studies have shown that sleep-deprived drivers' reaction times and performance skills are as poor as alcohol-impaired drivers'. There are two types of fatigue: • Physical - A tendency toward inactivity brought on by physical exhaustion. • Mental - A tendency toward inactivity brought on by mental or emotional stress. Your body and mind both get tired. Recognize physical and mental fatigue so that you can be sure you never get in a vehicle when your body needs to sleep. Your brain will find the sleep it needs when you are fatigued, and falling asleep at the wheel or experiencing a microsleep (temporary loss of concentration) can happen when you least expect it. Fatigue may be brought on by mental or physical exertion, stress, boredom, illness, or lack of sleep. Drowsy driving is now recognized as one of the leading causes of traffic crashes. Do not drive tired and do not ride with a tired driver. This module is about how being tired affects your ability to drive. The topics that will be addressed include: • Circadian Rhythm • Physical and Mental Effects of Fatigue • Micro-sleep • Sleep Driving • Driving on Long Trips • When do you find yourself wanting a nap - sometime in the afternoon after lunch? Avoid scheduling a drive when your circadian rhythm is low. These times are when you are more likely to zone out, blank out, or experience microsleeps at the wheel. According to the AAA Foundation for Traffic Safety, most sleep crashes occur during "the middle of the night" and during the early morning hours. Less obvious, though, there is also a peak in sleep-related crashes in the mid-afternoon. Our natural circadian rhythms dictate that we will be most sleepy during the middle of our nighttime sleep period, and again 12 hours later, between 2 p.m. and 4 p.m. Vehicle off-road rollovers most often occur during these hours. If you work a late shift or stay up late into the night for whatever reason, be aware that fatigue affects your mind, body, and all your senses, especially vision. It is not safe to drive if you have stayed awake during your natural sleep time. Fatigue affects your body and your mind. When tired, you are not as alert as you should be and your senses are dulled. Your vision is affected because your eye muscles are tired along with the rest of your body and focusing becomes difficult. Your peripheral vision shrinks. Your ability to search is also reduced, delaying hazard recognition. You may miss critical information such as road signs and traffic signals. Or worse, you may not see an animal or pedestrian approaching from the side. When you are tired, your body is relaxed and it takes more time to steer and brake. Your brain is slowing down and your ability to react quickly is reduced. Lack of sleep is one of the leading causes of traffic fatalities. Fatigue has many of the same dangerous effects as drinking alcohol. • 12 hours awake = same effect as .032 blood alcohol concentration • 18 hours awake = same effect as .07 blood alcohol concentration • 24 hours awake = same effect as .1 blood alcohol concentration Be aware that any of these blood alcohol levels could be illegal, and you could be considered as impaired as if you were drinking alcohol. Do not drive tired or after drinking. Never risk driving under this combination of risk factors. Fatigue-impaired Driving Page 5 of 9 Microsleep Microsleep is a term used for sudden, unexpected moments of sleep - microsleeps last 4-5 seconds. In 4-5 seconds, traveling 50 mph, your vehicle can travel the length of a football field. Close your eyes and count to five - imagine what can happen when you are asleep even for a few seconds at the wheel. In about half of the drivers who experience microsleep, there are no warning signs. Be attentive to the warnings that your body may give when you are about to fall asleep. Those warnings and symptoms include: • Discomfort - heavy arms and legs • Tense muscles • Heavy eyes • Constant yawning • Leaning forward while driving • Feeling tired • Headache • Your eyes close or go out of focus by themselves • Trouble keeping your head up • Wandering, disconnected thoughts • You are easily distracted. • You don't remember driving the last few miles • Drifting between lanes and wandering in your own lane • You tailgate • You miss traffic signs. • You hear the noise of rumble strips or lane markings. • You keep jerking the vehicle back into the lane. • You have drifted off the road and narrowly missed something. When you notice these warning signs, get off the road. Do not depend on warning signs because sometimes microsleeps occur without any warning. You cannot predict when you will fall asleep at the wheel. Do you have health issues that disrupt your sleep patterns? Do you have a difficult time getting the needed 8 hours of sleep recommended by the National Sleep Foundation? If so, you are a likely candidate for microsleep, or "nodding off" while driving. If you experience microsleep, pull off where it is safe and you can rest. Prevent microsleep by: 1. Driving only when rested 2. Scheduling your drives to avoid your circadian rhythm "low-times" 3. Maintaining a consistent sleep schedule 4. Avoiding mental and physical exertion before driving Rest is the only cure for the effects of fatigue. Do not even consider driving if you are tired. In March 2007, the Food and Drug Administration (FDA) issued new warnings for prescription sleep aids, alerting patients that the drugs can cause allergic reactions and complex sleep-related behaviors, including "sleep driving." The agency has asked the makers of more than a dozen drugs to alter drug labels and officially warn doctors and patients of the risks associated with sedative-hypnotics. These commonly prescribed sleep aids are widely used and frequently advertised on television. Some patients who have taken the drugs, have reported participating in behaviors similar to sleepwalking, but far more complex - such as driving, all with no memory of the events. If you are taking these types of drugs, reduce the risk of unpredictable "sleep driving" by taking no more than the prescribed amount and do not mix it with alcohol. This information may not apply to you directly, but add it to the list of reasons you need to be a defensive driver, stay focused, and be aware at all times - the driver next to you could be asleep with their eyes wide open. Driving on long trips is a unique experience: • You are behind the wheel for a greater distance and time than you are normally used to. • There are different driving environments and unfamiliar roads, which require you to be alert and attentive. • Time zone changes interfere with your normal body clock and schedule. Tips for preventing fatigue when driving on long trips include: 1. Get plenty of sleep before you depart. 2. Ensure your vehicle has good air circulation. 3. Wear your seatbelt - it "holds" you in your seat and your muscles do not tire so quickly. 4. Take frequent breaks. Schedule and plan to stop every two hours, get out, and walk around. 5. Rest. If necessary, find a hotel to prevent a fatigue-related crash. Lack of sleep is one of the leading causes of traffic fatalities. Fatigue has many of the same dangerous effects as drinking alcohol. For example, being awake for 18 hours straight has the same effect as a .07 BAC. The circadian rhythm is built into the human body to seek rest for itself. We will be most sleepy during the middle of our nighttime sleep period, and again 12 hours later, between 2 p.m. and 4 p.m. When you are tired, your body is relaxed and it takes more time to steer and brake. Your brain is slowing down and your ability to react quickly is reduced. Fatigue blurs your visual acuity, shrinks your peripheral vision, and slows your hazard recognition abilities. You may miss critical information such as road signs and traffic signals. Microsleeps are sudden, unexpected moments of sleep that last 4-5 seconds. In 4-5 seconds, traveling 50 mph, your vehicle can travel the length of a football field. If you experience microsleep, pull off where it is safe and rest. If you are taking sedative-hypnotic drugs such as Ambien or Lunesta, reduce the risk of unpredictable "sleep driving" by taking no more than the prescribed amount and not mixing it with alcohol. Tips for preventing fatigue when driving on long trips include: 1. Get plenty of sleep before you depart. 2. Ensure your vehicle has good air circulation. 3. Wear your safety belt - it "holds" you in your seat and your muscles do not tire so quickly. 4. Schedule and plan to stop every two hours, get out and walk around. Anger, fear, anxiety, and extreme happiness are examples of emotions that can interfere with your ability to make safe driving decisions. Emotions affect the body physically and mentally. Emotional stress also causes dangerous fatigue. As a driver, when you are physically and mentally off-balance you need to recognize the warning signs and take control of your emotions. We all experience stress as a part of our daily lives. At extreme levels, stress causes an increase in your heart rate, an increase in your breathing rate, muscle tension, headaches, and fatigue. All of these reactions impair your ability to operate a vehicle. Learn the warning signs. Recognize why and when your ability to make good decisions is affected by emotions. One of the ways to manage emotions, especially anger while driving, is to leave early - allow yourself plenty of time to get from point A to point B. This reduces the need to speed and allows you time to be patient and courteous. Work on adjusting your attitude and staying calm - especially when someone cuts in front of you or is tailgating and honking at you because you are traveling the speed limit. This module is about emotional impairment and how it affects driving. The topics that will be addressed include: • Emotional Impairment • Why Driving Makes People Angry • Aggressive Driving • Recognizing Aggression Within • Managing Your Emotions Driving requires interaction between your body and mental processes. Drivers routinely drive in mental states that interfere with the ability to perceive risk and react quickly. You are impaired when your ability to operate a vehicle is limited or hampered. Emotional impairment leads to unpredictable behavior, which increases the risk for everyone in the driving environment. Emotional impairment factors are hard to manage because they often arise suddenly, without warning. The most common factors that create an emotionally impaired driver include: • Stress • Anger or rage • Fear, anxiety, or panic accompanied by irrational thoughts • Depression • Grief • Speed addiction • Risk addiction • Habitual disrespect for the law • Negativity that condones hostility on the highway • Denial of one's own driving mistakes Drivers who drive recklessly while experiencing these emotions are characterized as unwilling to exercise self-control because of fear, vengeance, prejudice, or disrespect for others. Avoiding collisions requires complex decisions and skilled responses. Other drivers depend on you to be rational and predictable. Driving is a dynamic activity that involves high-risk incidents and interaction with thousands of unpredictable drivers. Routine events are mixed with incidents that are not routine such as being cut off, tailgated, or having to follow a very slow moving vehicle. We enjoy the freedom and independence of driving when and where we please. Many drivers do not react well when that expected freedom is interrupted by restrictions, regulations, congestion, and the unexpected actions of other drivers. The following is a list of emotional challenges that are common reasons why drivers get angry, hostile, and exhibit aggressive behavior: • Restriction. In a traffic jam, when drivers cannot get where they are going on time or at the expected speed of travel, anxiety builds up to "escape" the confinement of congested traffic. This anxiety causes drivers to perform aggressive maneuvers to get away from or get ahead of others. • Being confronted with danger. Congested traffic filled with impatient drivers who make unpredictable moves, cause "close calls" and near collisions. Being confronted with dangerous situations increases stress, fear, resentment, and rage. • Regulation. Government regulation, and all of the rules associated with driving, angers some people because they feel like it is an imposition, prompting them to disregard the rules because they do not agree with them or they are just rebellious. • Lack of control over the situation. When drivers have no control over their driving environment and are stuck in traffic, the lack of control over the traffic event is frustrating and often leads to anger vented towards a nearby driver. It is the application of the old adage, "frustration leads to aggression." The National Highway Traffic Safety Administration (NHTSA) defines aggressive driving as "the operation of a motor vehicle in a manner that endangers or is likely to endanger persons or property." Examples of aggressive driving behavior include: • Improper passing • Speeding • Improper lane changing • Failure to obey traffic controls • Reckless, careless or inattentive driving • Making illegal turns • Tailgating • Failure to signal lane changes • Shouting, swearing, name calling When you think of an aggressive driver, what image comes to mind? Aggressive driving has several levels and an assortment of penalties - all of which can be avoided if you can learn how to manage your aggressive tendencies when driving. You are considered to be engaging in aggressive driving if you commit at least 3 of the following during 1 episode of continuous driving: • Following a vehicle too closely • Operating a vehicle unsafely • Overtaking another vehicle on the right by driving off the roadway • Stopping or slowing of your vehicle unsafely • Sounding of your vehicle's horn unnecessarily • Failing to yield proper right-of-way at an intersection • Failing to obey a traffic control device • Driving at an unsafe speed • Flashing the vehicle's headlights repeatedly These behaviors are considered "aggressive" by law enforcement because they demonstrate a disregard for the law. The aggressive driver typically denies that these crash-causing behaviors are aggressive. But it is clear that drivers who put others in danger by the way they choose to drive are hostile, dangerous and selfish. They want to force others out of their way. These drivers feel justified in dominating others and that's what labels this type of behavior "aggressive driving". Research conducted by the National Highway Traffic Safety Administration (NHTSA) in "Traffic Safety Facts 2005" cited that aggressive drivers injure two to four times more people than drunk drivers. Road rage is an escalation of emotions generally provoked by aggressive drivers. Road rage is characterized by a driver using their vehicle or some other object to threaten or cause physical harm to another highway user as a result of a traffic incident. Aggressive drivers are more likely to allow their emotions to take control and participate in road rage. Examples of road rage behavior include: • Using the vehicle to cut other drivers off or run them over • Chasing other vehicles in pursuit • Throwing objects from the vehicle • Physical fighting • Rude and obscene gestures • Shouting, swearing, name calling • Honking to protest another driver's actions • Shining high-beam headlights in retaliation Negative emotions encourage negative, judgmental, and self-serving thoughts. Negative thoughts often surface in the form of hostile verbal expression. Recognize the effects of emotions on your personality when you drive. Watch for anger caused by the need for revenge or retaliation: • Do you slow down if someone is tailgating you? • Do you want to ram a vehicle that cuts you off or takes the space directly in front of your vehicle? • When bicyclists are in your lane do you want to get right behind them and honk the horn? Recognize your competitive nature: • In heavy traffic do you want to weave in and out to get ahead? • When you are running late, do you tailgate slow moving vehicles? • When a vehicle pulls in front of you, do you speed up and try to get around it, even though it is risky? Identify characteristics that you have that are associated with impulsive, reckless driving - if you recognize any of these it is time to consciously alter your behavior. • Do you drive as fast as you want when the road is clear and you do not think you will get caught? • Do you run yellow lights? • Do you drive when you are tired? • Do you drive after consuming alcohol? When you detect your emotions dominating your judgment and actions, practice a technique called self-regulation. Just forget about the gratification of getting even or engaging in a hostile act. Short-circuit the buildup of rage. • Do not be competitive. Driving is not a contest. • Do not take the aggressive actions of other drivers personally. Try not to be judgmental. Do not jump to conclusions about their behavior or actions. Put yourself in the other driver's shoes. Perhaps they are dealing with an emergency. • Listen to soothing music. • Cool off when you are angry or frustrated. • Go with the flow of traffic. Do not try to beat it or fight it. • Give yourself more time than you think you will need to complete your trip. Leave early. • Stay focused on the driving task. • Demonstrate the kind of courtesy you would like to receive from others. • Adjust the air conditioner to keep yourself cool and calm. Turn a negative driving situation into a positive scenario. Concentrate on the safety of your vehicle, yourself, and your passengers. If you demonstrate courteous behavior, you and society in general will benefit from your decision. Enjoy your driving experience. Driving requires interaction between your body and mental processes. Drivers routinely drive in mental states that interfere with the ability to perceive risk and react quickly. You are impaired when your ability to operate a vehicle is limited or hampered. Drivers who drive recklessly while experiencing these emotions are characterized as unwilling to exercise self-control because they are experiencing fear, vengeance, and prejudice or expressing disrespect for others. If you are stuck in a traffic jam and you can feel your anger rising, you are experiencing an emotional challenge called restriction. The National Highway Traffic Safety Administration (NHTSA) defines aggressive driving as "the operation of a motor vehicle in a manner that endangers or is likely to endanger persons or property." Examples of aggressive driving behavior include: • Improper passing • Speeding • Improper lane changing • Failure to obey traffic controls • Reckless, careless or inattentive driving • Tailgating • Failure to signal • Shouting, honking, swearing, name-calling • Using the vehicle to cut off other drivers • Chasing other vehicles in pursuit Aggressive drivers injure two to four times more people than drunk drivers. Concentrate on the safety of your vehicle, yourself, and your passengers. Be a courteous driver and enjoy your journey. When you drive, distractions are everywhere, not just in your vehicle. At a typical intersection, you are surrounded by other drivers that are distracted or not paying attention. • 31% of drivers talk on the phone • 81% listen to the radio • 31% listen to a CD player • Up to 88% of drivers eat or drink • 27% have children passengers and 19% of those drivers are transporting kids in the backseat. • 46% apply makeup, comb their hair, and look in the mirror. This module is about how important it is to stay focused on the task of driving when you are behind the wheel. Inattention and distraction are becoming more difficult to manage. Topics to help you manage your distractions include: • Importance of Staying Focused • Inattention and Distraction • Distractions You Can Control • Managing Distractions You Can Control You need your eyes on the road ahead and both hands on the wheel to be capable of reacting quickly and controlling your vehicle. Split attention or focusing on distractions may narrow your field of view, shrink your peripheral vision and may cause a delay in hazard recognition. Distractions may also cause your hands to come off the wheel and steering can be affected. Road Events and Driving Decisions The average driver travels 24 miles per day to and from work in heavy, or rush hour traffic. For each mile driven, there can be up to 200 events that you have to see and decide what to do. During that single mile, you will make approximately 20 decisions - decisions that tell your hands to steer, your feet to brake, or both. Out of those 20 decisions, most drivers make two driving errors
•
Ask how these side effects may affect your driving.
•
Attach a small convex curved mirror in the corner of a flat mirror. This will help you see blind areas, but will not help gauge distances. By using both mirrors together, you can detect other vehicles with the curved surface and judge how close they are with the standard mirror.
•
Attempting to elude police
•
Avoid distractions.
•
Avoid sudden steering and braking movements.
•
Avoiding Drug-impaired Drivers
4.
Avoiding mental and physical exertion before driving
•
Barbiturates (downers)
•
Be prepared to manage hazardous situations.
•
Before you slow down, stop, or when anything in the lanes ahead suggests a change of speed or position.
•
Being confronted with danger. Congested traffic filled with impatient drivers who make unpredictable moves, cause "close calls" and near collisions. Being confronted with dangerous situations increases stress, fear, resentment, and rage.
•
Blind persons present. Drivers must always yield the right-of-way to persons who are blind. When a pedestrian is crossing a street or highway guided by a dog or carrying a white or metallic cane (with or without a red tip), vehicles must come to a complete stop (VC 46.2-932.1).
•
Blocked lane. If your lane is blocked, you must yield the right-of-way to other vehicles around you before you prepare a lane change to go around the vehicle blocking your lane.
Drinks
Body Weight in Pounds
•
Body movements and hand signals
•
Both hands on the wheel to be prepared for the unexpected.
•
Brake lights
3.
Braking distance
3.
Braking distance - This will vary depending on the speed at which you are traveling and the conditions of the roadway. The faster you are traveling, the farther it will take for your vehicle to stop. However, there are many factors that can increase perception distance, reaction distance, and braking distance.
•
Busy sidewalks
clean the terminals and make sure it is operating at maximum strength. •
Check the hoses for cracks. • Replace tires with "all-season" or "snow" tires - check inflation regularly. • Test the heating and air-conditioning system. • Check coolant/antifreeze to determine the lowest temperature that it will go to without freezing. • Install winter wiper blades and fill the windshield wiper fluid reservoir with a washer solution containing an antifreeze additive. • Check and adjust the brakes. • Check the exhaust system for leaks, holes, and rust. • Purchase and practice installing the tire chains. • Carry booster (jumper) cables, flares, emergency warning triangles (or other warning device), a small tool kit, first aid kit, and a flashlight with spare batteries. • Keep your fuel tank at least 1/2 full. If you are traveling in a remote area, carry a blanket or sleeping bag, non-perishable food, candles, matches, warm clothes, and gloves. You should be dressed for the elements but if you are not and just in case you get stuck, carry boots and warm outerwear. In addition, throughout the winter, make sure you have a few other things just in case you need to clear off your windows or in case you get stuck: • Snow brush, combination ice scraper • A bag of sand or kitty litter • Lock de-icer fluid (be sure to not store this in your trunk - carry it with you) • Snow shovel If you can, park inside a garage. Always have at least half a tank of gas to keep moisture from forming in your gas line and freezing. Driving on slippery surfaces requires increased visual range. Focus your attention far ahead on the roadway to ensure you can gauge the distance between you and the obstacles ahead
•
Consider the consequences of your decision.
•
Contrast sensitivity
•
Crashes
•
Ensure your lights and windows are clean and clear.
2.
Ensure your vehicle has good air circulation.
•
Erratic changes in speed
7.
Failing to obey traffic signs or signals. This category includes a driver not signaling the intention to turn or change lanes, a common communication error.
•
Driving under the influence of alcohol or drugs (11 years)
•
Failing to satisfy a citation or appear in court
•
Failing to yield proper right-of-way at an intersection
4.
Failing to yield the right-of-way
4.
Failing to yield the right-of-way.
•
Failure to obey a traffic signal (3 years)
•
Failure to obey traffic controls
•
Emergency vehicle is approaching. You must yield to any emergency vehicle that is using its siren and flashing lights. Virginia's "Move Over" law requires individuals driving on a multi-lane highway to move out of the way, when an emergency vehicle, with flashing lights, approaches. A first offense is considered an infraction, and a second offense is classified as a Class 1 misdemeanor (VC 46.2-921.1). It is also illegal to follow any fire department vehicle that is responding to an alarm at a distance closer than 500 feet, or to drive into or park your vehicle within a block of where the fire department vehicle has stopped in answer to a fire alarm (VC 46.2-921).
•
Failure to signal
•
Discomfort - heavy arms and legs
•
Displaying a canceled, altered, or fictitious license
•
Distractions You Can Control
•
Do not be competitive. Driving is not a contest.
•
Do not drive in excess of the speed limit or slower than the minimum speed limit. If you have poor traction or poor visibility, slow down to maintain control and be able to stop if a hazard is in your path.
•
Do not drive into the curve faster than the speed posted on the warning sign.
•
Do not drive where you cannot see. If your vision is blocked, reduce your speed and reposition your vehicle so you can see well ahead, and around your vehicle; do not forget to look behind.
another driver must give it to you. Drivers make mistakes and demonstrate a lack of courtesy even when they know the rules. Do your best to communicate your intentions when there is confusion about the right-of-way. Follow the rules of the following scenarios: •
Emergency vehicle is approaching. You must yield to any emergency vehicle that is using its siren and flashing lights. Virginia's "Move Over" law requires individuals driving on a multi-lane highway to move out of the way, when an emergency vehicle, with flashing lights, approaches. A first offense is considered an infraction, and a second offense is classified as a Class 1 misdemeanor (VC 46.2-921.1). It is also illegal to follow any fire department vehicle that is responding to an alarm at a distance closer than 500 feet, or to drive into or park your vehicle within a block of where the fire department vehicle has stopped in answer to a fire alarm (VC 46.2-921). • Turning left and U-turns. Signal your intention when turning left at an intersection or when making a U-turn. Yield to all oncoming traffic until there is a gap providing you with sufficient time and space to safely turn. • Exiting a driveway or parking space. Yield to all vehicles already traveling in the roadway. • Pedestrians present. Drivers must yield to pedestrians in marked or unmarked crossings. Drivers must also exercise "due care" to try and avoid hitting a pedestrian even if they are not in a pedestrian crossing. • Blind persons present. Drivers must always yield the right-of-way to persons who are blind. When a pedestrian is crossing a street or highway guided by a dog or carrying a white or metallic cane (with or without a red tip), vehicles must come to a complete stop (VC 46.2-932.1). • Blocked lane. If your lane is blocked, you must yield the right-of-way to other vehicles around you before you prepare a lane change to go around the vehicle blocking your lane. • Your lane is ending. If your lane is ending, you must yield the right-of-way to vehicles already traveling in adjacent lanes. • Funeral processions. A vehicle with lighted headlights in a funeral procession has the right-of-way at an intersection and may proceed through the intersection if the procession is headed by a lead or funeral escort vehicle displaying flashing red and blue lights, unless the right-of-way is required by an emergency vehicle giving an audible signal (VC 46.2-828). Unless authorized by a traffic officer, you may not drive your vehicle between the cars included in the funeral procession. Turning on your headlights in an attempt to appear as part of the procession or otherwise impersonating a funeral procession member is illegal and may be punishable by a fine. • Over 80% of the vehicles involved in fatal crashes in 2008 were passenger cars or light trucks - including pickups, vans, and sport utility vehicles. Light trucks are the most popular vehicles on American roads today. The open and rugged tread design of the tires limit the vehicle's ability to stop and turn. On average, pickups and SUVs need between 10-20% more distance to stop than passenger cars traveling at highway speeds. Although light trucks are similar to passenger cars, they are usually taller, heavier, and have different tires and suspension systems than cars. A taller vehicle allows the driver to see over surrounding traffic and search farther down the road ahead for potential dangers. The extra height may cause problems when entering certain garages and enclosed parking spaces. Pickup truck, small van, and SUV drivers pose other problems to car operators. These taller vehicles make it more difficult for passenger car drivers to see through, around, or past them. In a crash, the bumpers of tall vehicles cause more damage and increase the possibility of injury to the car's occupants. They also cause more glare when approaching or following other traffic because headlights are higher. The square shape and taller height of the light trucks mean they are more likely to be blown off the road by high winds. Light trucks are heavier than passenger cars and take longer to stop, turn, or accelerate than do lighter vehicles. In an evasive emergency maneuver, the higher center of gravity of these vehicles makes them prone to roll over or pitch forward more easily than a car. Step vans (delivery trucks) and 15-passenger vans are large vehicles with limited visibility to the rear. These vehicles have the same performance and handling characteristics of pickup trucks, SUVs and light trucks. Seldom is there an interior mounted rear-view mirror available for the driver to see to the rear of the vehicle. Avoid placing your vehicle at the rear or directly to the side of a van on the road. Increase space between your vehicle and a large van if possible. If you have to pass, ensure there is space in your lane to quickly overtake and reenter your lane. According to the NHTSA, in 2008, large vehicles including single-unit trucks and semi-trucks (18 wheelers) weighing more than 10,000 pounds accounted for approximately 11% of the vehicles in fatal crashes. In general, the bigger and heavier the vehicle, the longer it takes to accelerate and stop. Larger vehicles are also less maneuverable than smaller vehicles. Drivers of large vehicles sit up high and have an excellent view of the road ahead
•
Emotional Impairment
•
Energy Absorption
•
Failure to signal lane changes
•
Do not increase your speed until you are through the curve and see a straight path ahead of your vehicle.
•
Do not move into the lane too soon. The longer you stay in the lane, the more likely you will meet someone coming in the opposite direction.
•
Do not slow down or stop without communicating to the driver behind you. Communicate your intention to stop or slow by tapping your brakes.
•
Do not stop quickly without a warning. When there is time and opportunity to signal, drivers must not stop or suddenly decrease speed without first giving a signal to the driver of any vehicle immediately to the rear by tapping the brakes.
•
Do not take the aggressive actions of other drivers personally. Try not to be judgmental. Do not jump to conclusions about their behavior or actions. Put yourself in the other driver's shoes. Perhaps they are dealing with an emergency.
•
Do not use a shared left turn lane as a through lane. If you do not want to turn, stay out of the lane. Never use the center lane for passing.
•
Do not use your horn directly behind a bicyclist or a horse rider on the side of the roadway.
•
Do not use your horn to greet other drivers or pedestrians.
it can be extremely dangerous. The vehicle's engine provides the power required to move the vehicle across the surface of the road. Your engine should always operate smoothly with no strange or irregular noises. Always ensure that your tires are inflated to the pressure recommended by the manufacturer and presented in your vehicle's user manual. Avoid fast starts, abrupt stops, and sharp turns. Tire failure can occur suddenly and without warning. A "blowout" occurs when a tire suddenly loses all of its air pressure. Power steering makes changing your vehicle's direction almost effortless - until it fails. Loss of power steering makes it harder to control the vehicle's direction. Regaining control of the vehicle's direction will require substantial upper body strength, arm strength, and flexibility. Another emergency situation that requires quick and decisive actions is brake failure, which causes you to lose your ability to stop. If the vehicle accelerator malfunctions you can quickly lose control of the vehicle's speed. If your hood flies up on the highway your visibility can be significantly impaired and you could be traveling blind in high speed traffic. This module addresses the correct emergency procedures to follow in the event you experience vehicle system failures. Topics include: •
Engine Failure • Steering Failure • Tire Failure • Brake Failure • Accelerator and Hood Malfunction Whether you are driving a vehicle equipped with an automatic or manual transmission, remember to drive at moderate vehicle speeds and engine revolutions until the engine has warmed up. This allows the engine lubricants and parts to warm up and operate smoothly. Engines fail for many reasons - overheating, lubrication system failure, or malfunctioning fuel or electrical system. Make sure to reference your owner's manual for routine maintenance schedules and instructions for the proper operation of your vehicle's engine. If your engine should suddenly fail: • Keep your eyes on the road. • Select the best place to exit traffic. • Shift into NEUTRAL and keep moving. • Signal and steer out of traffic without braking. The brakes and steering will be harder to operate because the hydraulic system that controls your power brakes and power steering has failed. • Position your vehicle safely on the shoulder and try to restart the engine. • If it fails to start, turn on your emergency flashers and exit the vehicle away from traffic and raise the hood. • If you have a cell phone, use it to call for roadside assistance. • If you have them, place flares or warning triangles to warn other drivers. Fire A vehicular fire is an emergency situation that is potentially life threatening. Engine fires are usually caused by a fuel or electrical problem. If you detect a fire in the engine compartment by seeing flames or smoke, or if you smell smoke follow these procedures: • Keep your eyes on the road. • Search for a safe departure path off the roadway and a safe open area (avoid service stations and buildings). • Signal, slow, and steer out of traffic and off the road. • Turn off the engine. • Immediately exit the vehicle along with all your passengers. • DO NOT touch the hood. • DO NOT try to put the fire out. • Move at least 100 feet away from the vehicle and traffic. • If you have a cell phone, call 911 and describe the problem indicating that you need the fire department. • Remain at a safe distance away from the vehicle until the fire department arrives
•
In traffic, you often find yourself boxed in a slow moving lane - this indicates you have not spotted problems ahead well enough in advance to avoid them.
they are on different circuits with different bulbs and can serve as a back-up for each other if there is a malfunction. If switching to high beams does not work, turn on your parking lights, emergency flashers, or use your turn signals to give you enough light to get off the road. Park your vehicle and do not drive the vehicle until you get the lights fixed. If you have a cell phone, use it to call for assistance. Power steering failure is much more common than total steering failure. The steering wheel will suddenly become very difficult to turn when the power steering fails. If your power steering fails, grip the steering wheel firmly and turn it with more force. Keep your eyes on the road, select a place to exit traffic, signal, and when it is safe to do so, steer off the road out of traffic and stop. Do not drive the vehicle again until you have a mechanic fix the problem. Total steering failure happens very rarely. However, if the steering or suspension system does fail, your ability to steer the vehicle is lost. If you experience total steering failure, bring the vehicle to a stop as quickly and safely as possible. •
Downshift to a lower gear. • Lift your foot off the accelerator. Use the parking brake to slow and stop the vehicle. Hold the parking brake release button down as you operate the handle to keep the rear wheels from locking and sending the vehicle into a skid. Do not use the foot brake because it might cause the vehicle to pull sharply to one side. Maintain your tire pressure as recommended by the manufacturer in your vehicle's user manual. If your tires are over-inflated they will tend to wear in the center of the tread and not provide you with the maximum "grip" to the road's surface. If the tires are under-inflated they will tend to wear on the outer edges and adversely affect vehicle handling, fuel economy and ride quality. You can extend the life of your tires by avoiding driving on under-inflated tires. When you replace your tires they should be the same size and type that were delivered by the original vehicle manufacturer. Tire Failure Tire failure can occur suddenly and without warning. However, the most frequent cause of a flat tire is a gradual loss of air that the driver does not notice. It is important to remember that tires wear quickly if you constantly drive in unfavorable conditions or fail to conduct routine tire maintenance. Abnormal tire wear can be caused by several things all of which can lead to tire failure. Several of the factors are listed below: • Under inflation (low tire pressure). • Repeated hard and abrupt braking • Sharp and overly aggressive steering maneuvers • Unbalanced wheels • Poor wheel alignment • Frequently driving over bumps and through potholes A "blowout" occurs when a tire suddenly loses all of its air pressure. Old and badly worn tires have a high risk of going flat or having a blowout if you hit a pothole, strike a curb, or run over an object in the roadway. When you experience a tire failure in your front tires, the vehicle will pull hard in the direction of the deflated tire. When you experience a tire failure in a rear tire, the rear of the vehicle may fishtail, or swerve in one direction and then the other. If you are in an emergency situation, react quickly and concentrate on regaining control of the vehicle. You should follow these procedures: • Keep your eyes on the road. • Grip the steering wheel firmly with both hands. • Do not brake (braking may increase the pull or swerving effect). • Slow the vehicle by easing off the accelerator. • Check traffic ahead, to the sides, and to the rear. • Select a gap in traffic, signal, and steer off the road out of traffic. • Drive slowly off the road and onto the shoulder. • Once you have control of the vehicle, gently apply the brake with a steady pressure and come to a stop on a flat surface. • Turn on your emergency flashers. • If you are in an unsafe location, continue to drive on the flat tire until you locate a safe location. You may ruin the tire but your personal safety is the first consideration. • Once you locate a safe location and are able to pull off the road, park as far away from the traffic lane as possible. • If you have a cell phone, call for roadside assistance. • Make sure other drivers can see you. Use flares or reflective triangles set 100 and 200 feet behind your vehicle along the side of the road. Did you know? Tires sold in the U.S. are evaluated and rated using two major safety factors - traction and temperature resistance. In addition to those factors, tires can also be rated for their fuel economy and projected tread wear. • The traction rating for a tire is a measure of the tire's ability to stop on a wet surface. The three ratings are A, B, and C. The A rated tire offers the best traction. • Temperature resistance is also rated A, B, and C. Tires rated A are the most heat-resistant and the least apt to have a heat-induced blowout. Treadwear grades are an indication of a tire's relative wear rate. The higher the treadwear number is, the longer it should take for the tread to wear down. The National Highway Traffic Safety Administration's control tire is assigned a rating of 100. Of current tires: 15% are rated below 200
however, sometimes you need a much greater distance - especially at higher speeds. Your space margins must be large enough to provide the time and distance you need to execute an evasive maneuver. The space in front of your vehicle is the easiest to control and the space to the rear is the most difficult. Always be prepared to conduct an emergency maneuver so when you are faced with a hazardous situation, you will be ready. This module addresses techniques you can use to avoid a collision or minimize the severity of a crash. Topics include: •
Driver Positioning • Emergency Stops • Steering Out of Trouble • Steering and Braking • Evasive Acceleration • Many drivers limit their ability to control the vehicle in an emergency because they sit too low or too close to the steering wheel. Sitting too close to the steering wheel increases the risk of being seriously injured in a crash or by the air bag. Before an emergency situation presents itself, be ready to respond by being in the proper seat position and secured in your restraints with your hands firmly grasping the wheel in the push-pull steering position. Being secured by your safety belt helps you maintain your balance when weight transfer occurs and also diminishes the force of impact to the body should a crash occur. The restraint system also holds you in the seat during sharp steering and helps braking maneuvers. Sitting up straight in the proper seating position also helps you see, steer, and brake quickly. Adjust your seat so that you can see the road clearly and reach the floor pedals and other vehicle controls easily. Sit erect and back in the seat, making sure you are at least 10 inches away from the steering wheel. This allows room to move your arms and reduces the chance of injury to the fingers, hands, and forearms if the air bag deploys. Maintain a firm grip on the steering wheel with your hands at the 8 o'clock and 4 o'clock position. This keeps your hands low with both hands on the steering wheel throughout the steering maneuvers. This low hand position also helps minimize injury to your hands if the air bag deploys. Identifying problem situations early can help you avoid a collision. To avoid panic stops, look well down the road and locate places where others may cross your path. At times, drivers in front of you slam on the brakes for no apparent reason. Maintaining an ample following distance gives you space and time to stop safely if your path is blocked suddenly by a stopped vehicle. Allow more space when traveling at higher speeds because of the increased stopping distance. The faster you travel, the more distance you need to stop. Factors such as your attention level, where you are looking, fatigue, impairment, weather conditions, and even the condition of the road surface also affect stopping times and distances. The 3-second Following Distance Maintaining a 3-second following distance is a good practice when you are following another vehicle on dry pavement and you have good visibility and a safe alternate path of travel (escape route) to at least one side. This rule works well for speeds up to 50 mph. Drivers who are ill, fatigued, or older than 55 years old should increase the space ahead. A 3-second space margin ahead (4-5 seconds for a truck or bus) when you are following another vehicle provides you enough time to find an alternate path you can steer into rather than having to make a panic stop. When three seconds is not enough... If a stationary object suddenly appears in your path or you encounter intersecting traffic, three seconds does not provide you enough time or distance to safely maneuver out of harm's way. At speeds greater than 50 mph, the time and distance needed to bring the vehicle to a stop may be greater than the distance you can see ahead. The 5-second Stopping Zone At highway speeds greater than 50 mph, when driving through hills, curves, inclement weather, or low-light conditions, increase the space ahead to at least five seconds. Maintain a 5-8 second space margin ahead in the following situations: • When following motorcycles - They provide little or no protection for riders, and motorcyclists stop more quickly than drivers of other vehicles. • When following large trucks - They block your view ahead and you need extra room to see around and to the sides. • When driving an RV, SUV, or van - The additional weight of recreational vehicles, sport utility vehicles, and large passenger vans cause them to require longer stopping distances. • When you are following school buses and tank trucks carrying flammable liquids - These vehicles must stop at railroad crossings. Anticipate these stops and allow extra space. • When on slippery roads allow a 7-8 second gap - You need more distance to stop your vehicle if the driver of the vehicle ahead slows or stops. • When you have a heavy load or are pulling a trailer - Larger vehicles require more time and space to enter traffic or stop. For every 10 feet of trailer length, add one second of space. Space margins provide visibility, time and distance you need to avoid collisions. This distance or space should provide for quick steering or a way out if you find yourself in an emergency situation. When you need to steer away from a collision, use the push-pull steering method for the best control of your vehicle. Space to the Sides To lower the probability of a collision, try to maintain at least one car width of space to one side of your vehicle at all times. When possible, it is best to maintain space on both sides of your vehicle. When you must drive through an area with less than one car width of space on the sides, reduce your speed to allow more space to the front. Space margins to the sides provide distance for you to react when traffic conflicts approach your vehicle. • Identify an alternate path you can steer into when threatened from the front or the side. • Keep space between you and pedestrians, bicyclists, and parked vehicles. A pedestrian may step into your path or a vehicle may suddenly pull out. • Avoid driving directly next to other vehicles on multi-lane streets. Change lanes, move ahead of the other vehicle, or drop back to a more visible position. • Keep as much space as possible between your vehicle and oncoming vehicles. Oncoming vehicles may cross the centerline or swerve into your lane. When possible, stay out of the lane next to the centerline. This is important at intersections when another driver could turn left in front of oncoming traffic. • Do not drive directly next to other vehicles at freeway exits. An exiting driver could suddenly swerve in front of you to get off or back onto the main highway. • Make room for vehicles entering the freeway. Change lanes when there is no one next to you to allow easy entry for other drivers. Driving Off the Roadway When you are faced with a crisis and the only escape path is the road's shoulder, you can drive on the shoulder safely, if it is handled properly. The most important thing to remember when driving on the shoulder, or any dirt or gravel surface, is your tires do not have the same level of traction as they do on pavement. This means you cannot turn as sharply or brake as hard as you can on the roadway. Turn the steering wheel only enough to get off the road, then slowly turn the steering wheel back in the opposite direction just enough to straighten the vehicle. Once on the shoulder, if the path is clear, it is generally best to stay there and slow gradually. Check traffic and when it is clear, steer back onto the roadway. Managing space to the sides of your vehicle is more difficult than controlling the space in front of it. This is particularly true when you try to cope with multiple dangers on both sides of your vehicle at the same time. Reducing risk in these situations requires proper timing, which involves adjusting the vehicle's speed and position. Separating Dangers Whenever an object moves or appears in your 5-second stopping zone, decrease or increase your speed and position the vehicle to maximize visibility and space. Maneuver to separate dangers when your current speed and path will place you in a situation where you will encounter two or more hazards at the same time and place. For example, if you see an oncoming truck approaching a narrow bridge, deal with one danger at a time. Instead of meeting the truck on the narrow bridge, slow down and let the truck pass. Then travel across the bridge with a greater cushion of space on both sides of your vehicle. Good timing and speed management will enable you to separate hazards, lowering your risk of collision. Compromise When you are faced with two dangerous situations that you cannot "separate," execute a maneuver that would result in the least amount of damage or injury. For example, on a narrow residential street you see a bicyclist on your side of the road. A truck is approaching in the oncoming lane, followed by a line of cars. The bicyclist is unpredictable and does not see you approaching. The oncoming truck driver probably sees you and can predict you will give the bicyclist space when passing. If you hit the bicyclist versus the truck, the consequence of collision would probably result in death. You compromise and maneuver to give the bicyclist space as you pass. Handling Dangers Behind Traffic statistics indicate that rear-end crashes account for about 5% of all fatal collisions. The space behind your vehicle is the most difficult to control. Whenever anything in the path ahead indicates you might have to change speed or position, check your rear-view mirror. When you are being followed too closely by another vehicle, increase your space ahead and identify an escape route to at least one side. Maneuver to allow the tailgater behind you to get in front of you. Slow gradually and move to the right side of the lane or roadway. You may be forced to locate a wide, flat shoulder and pull off the road to let a tailgater pass. If you have to leave the road: • If possible, avoid using the brakes until your speed has dropped to about 20 mph. • Brake very gently to avoid skidding on a loose surface. • Try to keep one set of wheels on the pavement to help maintain vehicle control. • Stay on the shoulder until your vehicle has come to a stop. • Signal and check your mirrors before pulling back onto the road. If you are forced to return to the road before you can stop: • Hold the wheel tightly and turn sharply enough to get right back on the road safely. • Do not try to edge gradually back on the road
however, there are some state-specific laws that you are obligated to follow when driving in Virginia. Understanding your responsibilities as a driver licensed to drive in Virginia also includes being fully aware of Virginia's licensing procedures and licensing requirements. If the state court system identifies you as an unsafe driver or finds you negligent of your responsibilities associated with driving, the court has the right to take away your privilege to drive at any time. This module covers Virginia licensing and Virginia driving laws. The topics that will be addressed include: •
Driving is a Privilege • Licensing Requirements • License Revocation and Suspension • Financial Responsibility • Other State Laws Licensing and State Laws Page 2 of 6 Driving is a Privilege Our society gives you the freedom to come and go where and when you wish. However, driving is not a constitutional right - it is a privilege you earned upon receiving your license. You are obligated to follow Virginia licensing regulations and rules of the road in order to keep that privilege. Your licensing process is regulated by the state government and Virginia has specific motor vehicle laws and designates various penalties for violation of these laws. Traffic laws are in place to regulate the flow of traffic. They are designed for your safety and the safety of others you are sharing the road with. Basic traffic laws that all drivers on the road are obligated to follow include: • Do not drive in excess of the speed limit or slower than the minimum speed limit. If you have poor traction or poor visibility, slow down to maintain control and be able to stop if a hazard is in your path. • Slowing down or "rolling through" a STOP sign is not enough and is against the law. Stop before your vehicle enters the crosswalk. If there is no crosswalk present, stop your vehicle just before your front tires reach the bold stop bar marking on the pavement. If there is no stop bar, drivers should stop at the point nearest the intersecting roadway where they have a view of approaching traffic before entering the intersection. • Position your vehicle in the center of your traffic lane. Signal your intention to change lanes or turn. • To yield the right-of-way means to allow another road user to cross or use an intersection or roadway before you do. At an uncontrolled intersection, if another vehicle is in the lane you want to enter, they have the right-of-way. This is true when backing out of a driveway or when you exit a parking space in a parking lot. Be prepared to slow down or stop if necessary to give the right-of-way to vehicles on the roadway. Proceed when safe to do so. • A steady yellow signal light ahead warns you that your permission to proceed is about to be terminated. Begin to slow and be prepared to stop. A red light will soon appear indicating it is illegal for vehicle traffic going in your direction to enter the intersection. A flashing yellow light means slow down and proceed with caution. Be prepared to yield to another vehicle or pedestrian if they are already in the intersection. Besides obeying basic traffic laws, drivers have countless other responsibilities: • Fulfill your financial obligations associated with collisions you cause. • Demonstrate courtesy to others on the roadway. • Protect your passengers at all times. • Properly maintain your vehicle. • Be familiar with your vehicle's features and functions. • Drive only when you are mentally and physically fit to safely operate your vehicle. • Always stay focused on the task of driving. Along with your driver's license comes the obligation to fulfill these responsibilities. The state point system is in place to help identify those who are not driving responsibly. If the pattern of non-compliance is not corrected, Virginia will exercise its right to remove your privilege to drive. Licensing and State Laws Page 3 of 6 Licensing Requirements A driver's license may be obtained by completing the application process at any of the local license branches in this state. Check your phone directory or go online at www.dmv.state.va.us for the nearest license branch and requirements for renewal. A driver's license does not license you to operate a motorcycle. If you are applying for a Virginia driver's license, permit or identification card, you will be required to provide proof of your identity. To obtain an ID card, an applicant must: • Provide two proofs of identity • Provide one proof of residency • Provide proof of legal presence To obtain a learner's permit or a driver's license, you must show: • Two proofs of identity (i.e. U.S. Birth Certificate or Passport) • One proof of Virginia residency (i.e. payroll stub or bank statement) • Proof of your social security number (SSN) • Proof of legal presence (birth document issued by a U.S. state, jurisdiction or territory) Out-of-state / Residency Requirements When you become a resident of Virginia, you have 30 days to obtain a Virginia title and registration for your vehicle, and 60 days to obtain a Virginia driver's license. Anyone wishing to obtain a Virginia driver's license that holds a valid photo license issued by another state, the District of Columbia or U.S. Territory must successfully pass a vision test. If the out-of-state license has been suspended, Virginia will not issue you a license until your driving record is cleared. Upon issuing the Virginia license your previous license will be forfeited. Age Requirements A driver's license gives a person 18 years of age or older full driving privileges to operate most types of vehicles on Virginia roads. Driver's licenses for individuals under 18 years of age may have restrictions. Minimum Age Requirements: • 16 years, 3 months, if you have held a valid driver education learner permit for 9 months and have successfully completed a DMV-approved driver education course • Provide proof of identity and date of birth from the current acceptable ID list • Successfully complete a written knowledge test based on the information contained in the Virginia Driver Manual • Successfully pass a standard vision screening test • Successfully pass a roadway skill test with a DMV driver examiner in a vehicle provided by the applicant • If less than 18 years of age, have an appropriate family member sign the financial responsibility agreement portion of the application No License Virginia will not issue a license to individuals: • Who are under the age of 16 and have not held a valid driver education learner permit for 9 months and successfully completed a DMV-approved driver education course • Whose license has been revoked or suspended and not reinstated • Who are judged by the court to be mentally incompetent • Who have a physical or mental impairment which makes it unsafe to drive • Who are unable to understand highway warnings or direction signs written in the English language No Test Also, certain groups may or may not have to take the driving test. • Roadway and written tests are not required for persons transferring to Virginia with valid driving privileges from the U.S., Canada, France or Germany. • Standard vision tests are required for drivers who transfer to Virginia with valid driving privileges issued from another state. • Any driver whose license was suspended for more than 5 years will be considered a new driver. New Drivers Any new driver has three attempts to pass the knowledge exam. After the third failed attempt, drivers 19 and older may complete a DMV- or Department of Education-approved course based on the content in the Virginia driver's manual. Upon completion of the course, the driver must present the Virginia Driver Training Re-examination Certificate (DTS-C) to be eligible to take the exam a fourth time. Organ Donation In addition to understanding the responsibility of driving, drivers should also be aware that they have the option to help others by becoming organ donors. In some situations, as many as 50 people can benefit from an organ donation made by a single individual. Drivers have the option to become an organ donor when applying for a driver's license, learner's permit, or photo ID card. (Drivers under 18 must have written consent from a parent or legal guardian first). Once you choose to become an organ donor, the preference is displayed on the front of your driver's license or photo ID card. Your decision to become a donor does not affect your driving privileges
1.
Driving only when rested
12.
Driving the wrong way on a one-way street
12.
Driving the wrong way on a one-way street.
•
Driving too fast for conditions. Over five million crashes occur every year due to driving too fast in bad weather, low traction, and poor visibility conditions.
•
Driving under suspension or revocation before giving proof of financial responsibility (11 years)
•
Driving under the influence of alcohol or another substance
however, your donor preference information will become part of your driving record. This information may be used to confirm your decision about donation, and can be useful for your family as they make final decisions. If you are not a donor but would like to become one, you can register or update your preference online at http://www.dmv.state.va.us, or update your preference the next time you renew your license. Licensing and State Laws Page 4 of 6 License Revocation and Suspension Know and follow the laws that govern the use of our roadways. If you choose not to demonstrate safe driving competence, your driver's license may be suspended or revoked. The Point System identifies those who may be habitually negligent drivers. The Virginia Department of Motor Vehicles (DMV) identifies drivers who accumulate a number of moving violations in a short period of time. The DMV also rules to assess a point value for each conviction of a moving violation under Virginia law. The point value relates to the seriousness of the offense in posing a risk to traffic safety. The following lists present many of the traffic violations that occur most frequently. These violations are grouped according to the number of DMV demerit points assigned to each violation. You will find the number of years that the conviction stays on your DMV record in parentheses beside each violation. This is not a complete listing of Virginia's traffic violations. Additionally, demerit points will be assigned to your record for traffic convictions incurred in other states. Six Point Violations •
Driving under the influence of alcohol or drugs (11 years) • Driving after illegally consuming alcohol (persons under age 21) (3 years) • Attempting to elude police - felony offense (11 years) - misdemeanor offense (3 years) • Driving while your license is suspended or revoked (11 years) • Reckless driving-speeding in excess of 80 mph (11 years) • Reckless driving-general (11 years) • Reckless driving - speeding more than 20 miles per hour or more in excess of the maximum speed limit or driving in excess of 80 miles per hour regardless of the maximum speed limit (11 years) • Reckless driving-on parking lots, etc. (11 years) • Reckless driving - racing/causing death is a felony punishable by term of confinement for not less than 1 year and not more than 20 years and one-year license revocation (11 years) • Reckless driving-passing or overtaking an emergency vehicle (11 years) • Reckless driving-passing a school bus (11 years) • Reckless driving-failing to give proper signal (11 years) • Reckless driving-faulty brakes/improper control (11 years) • Reckless driving-passing on the crest of a hill (11 years) • Reckless driving-passing two vehicles abreast (11 years) • Reckless driving-driving two vehicles abreast (11 years) • Reckless driving-passing at a railroad crossing (11 years) • Reckless driving-driving too fast for conditions (11 years) • Reckless driving-driving with an obstructed view (11 years) • Driving under suspension or revocation before giving proof of financial responsibility (11 years) • Speeding 20 MPH or more above the posted speed limit (5 years) Four Point Violations • Failure to obey a traffic signal (3 years) Three Point Violations • High-occupancy vehicle lanes (HOV) penalties. The first offense results in a fine of $50-$125, second offense within 5 years is a fine of $250, third offense within 5 years is a fine of $500, and fourth or subsequent offense within 5 years is a fine of $1,000. The length of time that a conviction stays on your record depends on the severity of the violation. If you receive an order or notice of revocation, suspension, disqualification or cancellation, your convictions could remain on your record for even longer than specified in one of these lists. DMV demerit points remain on your record for two years from the date that you commit the offense. The dates that demerit points are removed from your driving record are not related to the dates that convictions are removed from your record. Drivers under 18 years of age who hold a learner's permit or driver's license issued on or after July 1, 1998, will be required to attend a driver improvement clinic after their first demerit point conviction (including safety belt and child restraint violations). If they do not complete a clinic within 90 days, their driving privilege will be suspended until they complete the clinic. Also, until they reach the age of 18, they will be allowed to carry only three passengers under age 18 at a time, unless they are members of the drivers family or household. After a second demerit point conviction, DMV will suspend the minor's permit or license for 90 days. After the third demerit point conviction, DMV will revoke the minor's permit or license for one year or until they reach 18, whichever is longer. They will not be eligible to receive safe driving points for attending a driver improvement clinic whether they attend voluntarily or are required to attend by DMV or a court. Suspension is the temporary removal of your driving privilege. It's an action that may be taken after a review of your driving record. The suspension remains in effect for a specific amount of time, and then you may apply for reinstatement. In addition to the reinstatement fee, you must pay the appropriate license application fee for your age group. Revocation is the removal of your privilege to drive. It is required by law upon conviction of certain driving offenses. Once your revocation period has ended, your driving privileges will remain revoked until an investigation is completed. The investigation is to determine that all withdrawal actions have ended, and that all statutory requirements are met. You will be required to pay the appropriate application fee and reinstatement fee, and you may be required to file a Certificate of Insurance. A written, vision, and road test may also be required. Your license may be suspended or revoked for a variety of reasons. Read below for a list of just a few of them: • Driving under the influence of alcohol or another substance • Driving recklessly • Leaving the scene of a collision • Failing to satisfy a citation or appear in court • Refusing to take a chemical test • Displaying a canceled, altered, or fictitious license • Nonpayment of jail fees (SB 603) Driving without a License Driving without a license is prohibited in Virginia. Any person violating this law is charged with a Class 2 misdemeanor, with subsequent offenses classified as Class 1 misdemeanors (�46.2-301.1). Multiple offenses may also result in vehicle impoundment (�46.2-301.1). Licensing and State Laws Page 6 of 6 Review Our society gives you the freedom to come and go where and when you wish. However, driving is not a constitutional right - it is a privilege you earned upon receiving your license. You are obligated to follow state licensing regulations and rules-of-the-road in order to keep that privilege. Your licensing process is regulated by Virginia state government and your state has specific motor vehicle laws and designates various penalties for violation of these laws. Traffic laws are in place to regulate the flow of traffic. They are designed for your safety and the safety of others you are sharing the road with. If the state court system identifies you as an unsafe driver or finds you negligent of your responsibilities associated with driving, the court has the right to take away your privilege to drive at any time. Your Risk in the Driving Environment Page 1 of 8 Introduction Risk when driving is defined as the chance of injury, damage, or loss. In the driving environment, risk is always present. As a driver, you can lower your level of risk by searching the entire traffic scene for dangers and hazards
•
Driving when tired, sick, or medicated. After working hard and being up for long hours, drivers get behind the wheel and often do not realize that they are impaired. The greatest number of motor vehicle crashes, property damage crashes, injury crashes, and fatalities occur between 3 p.m. and 6 p.m. during weekday rush hours.
•
Driving while your license is suspended or revoked (11 years)
•
Drowsiness
10.
Drowsy driving
•
Inattention and Distraction
•
Evaluate your risk as the driver. Consider things such as fatigue, impairment, allergies, and illness.
•
Exceeding the speed limit. Traffic engineers set the speed limit as the safe speed to travel on the roadway in ideal conditions. Traveling faster than the limit increases the risk and severity of a crash. When drivers are in a "rush" they often speed because they think it will get them to their destination faster.
drivers of these vehicles frequently will pull over to allow backed-up traffic to pass. Exercise courtesy and patience. Before traveling on hills and mountains, prepare your vehicle's brakes and tires for extreme forces of gravity and inertia. When going through a curve, stay to the right side of your lane. Never coast down a hill in neutral or in overdrive - your vehicle could speed up beyond your control. Coasting downhill is illegal in some states. When traveling on rural roadways at higher speeds, remember you will need a longer stopping distance. Increase your following distance - make sure you have plenty of room to stop between you and any vehicle ahead. Many head-on, passing crashes occur because drivers fail to see and accurately judge the speed and distance of approaching vehicles. When you see oncoming vehicles getting closer, it is too close for you to start the pass. Always be sure there is safe space to return. Driving on multi-lane roadways and expressways can be an efficient and fast way to travel. Expressways are designed for safe driving at high speeds. Traffic travels in one direction in two or more lanes, and you can be passed on either side of your vehicle. Expressways have fewer collisions than highways because they are well maintained and their overall design provides drivers with a good view of the road ahead. Although they are convenient and allow drivers to get to their destination quickly, high rates of speed, congestion, and entering/exiting increase the risk of a crash. In 2008, almost 8,000 fatal crashes occurred on multi-lane roadways and expressways with three or more lanes (NHTSA). Expressway driving demands quick reaction time and the ability to search a great distance ahead because higher speeds require a longer visual lead. Use visual search techniques to scan at least 30 seconds down the road. This module is about driving on expressways. Topics include: •
Expressway Characteristics • Entering Expressways • Position and Speed • Maneuvering on Expressways • Exiting Expressways • Highway Hypnosis and Velocitation An expressway is a limited-access, controlled-access highway. Vehicles are allowed to enter and leave an expressway only at designated locations. There are no intersections, traffic flows in one direction and cross-traffic is eliminated. Expressways include freeways, interstates, and toll roads. Expressways have maximum and minimum speed limits, and pedestrians and bicyclists are prohibited from using them. The curves on expressway entrance and exit ramps are banked or sloped to maximize safety at higher speeds. Large directional signs are placed in locations that allow drivers plenty of time to maneuver if they need to get on or off the expressway. Usually, one mile prior to each exit, at least three signs are posted to help drivers prepare to exit. Watch for signs that indicate the distance to the exit and exit lane signs. There are also "exit" signs to inform drivers specifically where the exit is located. Interchanges Interchanges are designed to connect drivers to other highways going in another direction, through a carefully developed system of ramps and over/underpasses. Interchanges allow for fewer interruptions of the traffic flow but they can also be complex, confusing, and disorienting. Types of interchanges include designs that are shaped like a cloverleaf, a diamond, and a trumpet. • A cloverleaf interchange is designed to eliminate conflicting traffic when you make a left turn or try to cross traffic. • A diamond interchange is used when a road with low traffic intersects an expressway. Left turns can be made with lower risk on the low traffic road, so in this case a full cloverleaf is not necessary or economical. • A trumpet interchange is used when a low traffic road ends at a "T" intersection of an expressway. The trumpet shape allows traffic to enter and leave the expressway without having to cross traffic. • Before entering an expressway, search for entrance signs in the direction you intend to travel. Directional signs are posted at most entrances and communicate the route number and direction (north, south, east, or west) where the entrance will lead you. If you are unfamiliar with your route, be cautious not to enter an expressway using an exit ramp - prevent this critical mistake by searching for signs that say, "DO NOT ENTER". Enter most entrance ramps at low speeds and anticipate sharp curves. Be extra cautious if you are driving a large vehicle, SUV, or truck. Use the acceleration lane to adjust your speed to the traffic flow before merging onto the expressway. Select a gap, signal, check mirrors, and check blind spots. Be prepared to slow or accelerate quickly depending on the flow. Avoid very crowded and congested times of day. Prevent an emergency situation by merging without stopping. If there is a slow vehicle ahead of you on the ramp, drop back and create space ahead of your vehicle to accelerate when it is your turn to enter the traffic flow. Position your vehicle at least three seconds behind the vehicle you plan to follow. Merge smoothly. Turn off your signal. Adjust your speed to the traffic flow and recheck your rear-view mirror. • Weave Lanes • • Be prepared to maneuver quickly when you encounter an exit and an entrance that share a common lane. Generally, the right-of-way is given to exiting traffic
•
Failing to obey a traffic control device
7.
Failing to obey traffic signs or signals
•
Fear, anxiety, or panic accompanied by irrational thoughts
•
Feeling tired
•
Financial Responsibility
•
Flashing the vehicle's headlights repeatedly
•
Force of impact is greater.
•
Fulfill your financial obligations associated with collisions you cause.
•
Inattention and distraction. Drivers who are not paying attention to the driving environment run off the road and cause collisions.
check traffic ahead and behind. Staying focused on driving can sometimes be hard if there is little traffic or when driving long straight routes hour after hour. Watch out for a mental condition called "highway hypnosis" which is related to drowsy driving. Drivers can fall asleep or just enter a state of inattention easily. If you notice fatigue setting in, sit up straight, change your seat position slightly, and then turn on the air conditioning. Stop at the next exit and take a stretch, walk around, or drink something refreshing. Long monotonous drives might create a sensation that you perceive you are driving slower than you really are. Luxury vehicles are so comfortable the driver may not feel high-speed sensations. New vehicles are also quiet and sound levels of the traffic environment are often low or not present. After long periods of high speed travel, the eyes become fatigued in the horizontal plane due to images streaming through the windshield. This condition is referred to as velocitation. You will notice it when entering slower traffic after long periods of expressway driving. A sudden drop in speed gives the illusion that you are traveling much slower than you actually are. When you experience velocitation, your eyes are fatigued and are unable to judge horizontal velocity accurately. Consequently, it may be difficult to judge safe following distances or the proximity of exits. The remedy is to stop for several minutes and allow the eyes to rest. Watch for drivers tailgating without making an attempt to pass. This driver may be subconsciously staring at the rear of your vehicle rather than scanning the road ahead. In this situation you may essentially be steering both cars. Slow gradually to encourage the tailgater to pass. Conduct a self-test to be sure you are not losing your concentration. Check yourself to be sure you are not staring aimlessly at the vehicle in front of you. The key to safe expressway driving is: •
Guard against highway hypnosis. • Search for and process information. • Stay focused. • Adjust for other drivers. • Expressway driving demands continuous searching skills, smooth maneuvers, speed adjustment, and positioning. Signal your intention to merge as you enter the acceleration lane. Quickly evaluate the freeway traffic, look for a space to merge, and adjust your speed. Be prepared to slow or accelerate quickly depending on the flow. Prevent an emergency situation by merging without stopping. Position your vehicle with at least a 3-second following distance from the vehicle you plan to follow. Merge smoothly. Turn off your signal. Adjust your speed to the traffic flow. When you enter the expressway, select the lane you want to drive based on traffic flow, road conditions, and how far away your exit is. Reserve your use of the center and left lanes for passing. If you are in heavy expressway traffic at rush hour, use the center lane to avoid vehicles constantly entering and exiting in your path. ` Travel at the speed of the flow of traffic to avoid conflicts. Maintain a 3-4 second following distance. If the road is slippery or wet, increase the distance to 6-8 seconds. Increase your following distance if you have limited visibility. Avoid truck and large vehicle "no-zones". As you are being passed, position your vehicle so there is adequate space to the side to be passed. Keep your speed steady and do not accelerate. If you drive a high-profile vehicle, slow in advance of entering a tight curve on an entrance or exit ramp. Watch out for a mental condition called "highway hypnosis" which is related to drowsy driving. If you notice fatigue setting in, sit up straight, change your seat position slightly, and then turn on the air conditioning. Stop at the next exit and take a stretch, walk around, or drink something refreshing. Velocitation is caused by long periods of high speed travel. The eyes become fatigued in the horizontal plane due to images streaming through the windshield. Velocitation can be noticed when entering slower traffic after long periods of driving. A sudden drop in speed gives the illusion that you are traveling much slower than you actually are. When you experience velocitation, stop for several minutes and allow the eyes to rest. City Driving Page 1 of 8 Introduction Urban or city roadways have large populations, high traffic flow, many road controls, and a large amount of visual stimulation. With congestion and traffic jams, speeds tend to be lower, but there is quite a bit more sensory input that you have to pay attention to. Since we get most of our driving information from what we see, the busy urban environment can induce visual overload. In addition, all of the visual information requires more driving decisions. This module is about the unique characteristics of the urban environment and how to manage your risk when you drive in the city. Topics include: • Visual Issues • Plan Your Drive • Congestion • One-way Streets • Urban Pedestrian Issues You should carefully plan your route every time you drive
•
Habitual disrespect for the law
•
Have a plan. Identify an alternate path of travel 15 seconds ahead, and the level of traction available in case of an emergency.
•
Heavy eyes
•
High-occupancy vehicle lanes (HOV) penalties. The first offense results in a fine of $50-$125, second offense within 5 years is a fine of $250, third offense within 5 years is a fine of $500, and fourth or subsequent offense within 5 years is a fine of $1,000.
4.
Higher crash speeds reduce the ability of vehicles, restraint systems, and roadway hardware such as guardrails, barriers, and impact attenuators to protect occupants.
for example, when speed increases from 40 to 60 mph, speed goes up 50 percent while the energy released in a crash more than doubles. 4.
Higher crash speeds reduce the ability of vehicles, restraint systems, and roadway hardware such as guardrails, barriers, and impact attenuators to protect occupants. Driving at high speeds is dangerous, even when you are traveling the speed limit. High speed increases the risk of collision because: • Vision is reduced. • Traction and maneuverability are reduced. • Momentum is increased and it takes the brakes longer to stop the vehicle. • Force of impact is greater. Take note of how much you "don't see" when you travel at higher speeds. Speed and Physical Forces Page 3 of 8 Stopping Distance The kinetic energy of a vehicle is the extra energy it has gained as a result of its motion. The scientific definition is the amount of work that is needed to accelerate a body of a known weight from zero to a given speed. Having gained that kinetic energy during acceleration, the body maintains the kinetic energy unless its speed changes, like when you apply your brakes. Energy of Motion If there are two trucks exactly the same size, traveling at the same speed, one is empty and the other is fully loaded, the heavier truck has more energy of motion. Weight and speed affect your vehicle when you are trying to judge your stopping distance. If your vehicle is loaded with cargo and passengers and is twice as heavy as usual, it will probably take twice as long to stop. The faster you travel, the more energy of motion your vehicle will have. The energy of motion will change in proportion to the square of its change in speed. What does this mean? If you travel 40 mph, given the same braking power, it will require four times the stopping distance that it would take if you travel 20 mph. If you travel 60 mph, it will require nine times the stopping distance you would need going 20 mph. Stopping Distance As a driver, it's important to understand that increased speed increases your stopping distance. Stopping distances involve three factors: 1. Perception distance - This is the distance your vehicle travels from the time you visually see a hazard with your eyes to the time your brain registers it and triggers a response. The faster you travel, the less information you are able to see and process. Beware of highway hypnosis or daydreaming, as it can dramatically decrease perception distance. This will be discussed in more detail later in the course. Other factors that can decrease perception distance are fatigue, drowsiness, and illness. 2. Reaction distance - This is the distance traveled from the time your brain issues an instruction to the time your body carries out the instruction. An example of this would be the amount of time it takes to lift your foot and press the brake pedal. Perception and reaction normally require .75 seconds to 1.5 seconds for the average driver. 3. Braking distance - This will vary depending on the speed at which you are traveling and the conditions of the roadway. The faster you are traveling, the farther it will take for your vehicle to stop. However, there are many factors that can increase perception distance, reaction distance, and braking distance. As your speed increases you will cover more distance-which will decrease the time it takes you to perceive, react, and brake when necessary. Traction is also critical in judging stopping distance. Adjust your speed to maintain traction. Adverse conditions such as snow, rain, fog, wind, water, and slick roads can all increase the total distance required to come to a stop. Always abide by the posted speed limit and reduce your speed based on your ability to see and the condition of the road. Drive at a speed slow enough for your tires to grip the road if you need to stop. Energy of motion must be understood and counteracted when you drive. Reducing your speed and always wearing a safety belt will lessen the kinetic energy should a collision occur. Speed and Physical Forces Page 4 of 8 Energy Absorption If you drive a newer vehicle, it features vehicle impact and restraint systems designed to absorb energy and help protect you in a crash. The vehicle impact and restraint systems all work together. These systems help reduce injury and provide occupant impact protection. Your bumpers are designed to give when hard contact is made. Bumpers are equipped with shock absorbers. If you are in a fender bender, the entire system may have to be replaced. Even small bumper crashes are expensive to repair but worth it - you may need that protection again. In a crash, the vehicle body, front and back is designed to absorb energy - it is engineered to "crumple up." As the crumpling occurs, energy is absorbed. The passenger cage is designed to not give upon impact
4.
Higher crash speeds reduce the effect of vehicles' restraint systems and roadway safety features to protect occupants.
•
Honk when you are approaching a blind curve to warn others that cannot see you coming.
•
Horn
•
How far ahead you can see
•
How far ahead you can see. If you cannot see clearly or around obstacles, reduce your speed in the event you need to make an unexpected evasive maneuver.
Marijuana and Hashish
Illegal Distorted depth perception, impaired coordination, depression, panic, fear, hallucination
Hallucinogens - LSD, PCP, mescaline
Illegal Impaired senses, hallucination, panic, depression
8.
Improper driving technique
8.
Improper driving technique.
•
Improper lane changing
•
Improper passing
•
Improving Your Vision
•
In 2008 there were 5,811,000 traffic collisions reported. These collisions cost the national economy over $230 billion as they relate to property damage, medical costs, insurance premiums, and lost time at work. In addition, the cost of personal or family disruptions as well as mental and physical suffering can't possibly be measured in dollars.
•
In 2008, 16% of child traffic fatalities (ages 14 and younger) occurred in alcohol-impaired-driving crashes.
•
In heavy traffic do you want to weave in and out to get ahead?
•
On three lane highways, the center lane is for through driving, the right lane is for entering and exiting and the left lane is for overtaking.
and anti-lock brake systems (ABS) to enable drivers to steer the vehicle while bringing it to a stop. Innovative technologies are being added to vehicles to help drivers avoid crashes. Other crash-avoidance technologies that are proving to be effective include electronic stability control (ESC) and traction control systems (TCS). ESC stabilizes the vehicle and prevents skidding by active brake intervention on one or more wheels and by intelligent engine torque management. This technology helps the driver keep the vehicle on the road. If the system detects that the vehicle is beginning to skid while you are driving on a curve or executing an evasive lane change, it uses selective brake application to restore traction and consequently, control of the vehicle's direction or body lean (yaw). A yaw-rate sensor and a lateral acceleration sensor continuously monitor the movement of the vehicle about its vertical axis and compare the actual value with the target value calculated on the basis of the driver's steering input and the vehicle speed. The moment the car deviates from this ideal line, ESC intervenes to counteract any tendency to skid by applying a precisely metered braking force to one or more wheels. ESC systems combine the functions of ABS and traction control and complement them with directional stability assistance. The traction control system is an extension of anti-lock brake technology and is designed to help drivers maintain vehicle control in acceleration maneuvers. Traction control systems deal specifically with front-to-back loss of traction when you accelerate. If you accelerate from a dead stop, or you speed up while passing another vehicle, traction control ensures maximum contact between the road surface and your tires. Traction control works at the opposite end of the scale from ABS - dealing with acceleration rather than deceleration. According to the Insurance Institute for Highway Safety, this technology lowers the risk of a fatal single-vehicle crash by half, so it is worth shopping for. Some traction control systems are integrated and have safety features to control the loss of traction while you are driving on a curve or executing an evasive lane change. If one or more of the system's sensors detects that you are losing traction, it will initiate several events including: •
Independent braking • Throttle control • Steering assist Traction control systems are not designed to "take over" or replace the driver. They are designed to assist the driver in maintaining vehicle control. Integrated stability control systems have the ability to detect: • How fast the vehicle is traveling when there is a loss of traction • Lateral acceleration and g-loads Traction control has vastly improved since its introduction and it will continue to become an integral part of tomorrow's vehicles. Research your new vehicle for the application of other stability control technology such as the following: • The vehicle anticipates the direction the driver is steering, activating stability controls. • Sensors examine steering angles, yaw rates, weight transfer loads (G loading) and wheel traction. • Systems automatically select the correct course of action and engage the correct brake to keep the vehicle headed in the right direction Just as traction control has made huge strides over the past few years, the vehicle's suspension has also undergone refinement. Several manufacturers specialize in suspension upgrades. Look for a high performance, semi-active suspension control system. This type of system uses damping controls that can adjust the vehicle's suspension up to one thousand times per second. Systems can employ sensors to respond to road and driving conditions based on vehicle body and wheel motions. Added benefits include a smooth ride, precise control, and increased responsiveness. Some manufacturers are replacing traditional springs with air ride technology. This suspension system includes air bags that inflate when the vehicle goes around a corner - air bags on the outside of the turn inflate. The air bags continue to inflate until the vehicle's lean is minimized. The air bags are supported by a compressor which provides the inflating air. The entire system is controlled by one of the vehicle's onboard computers. Additionally, if required, the system can raise the vehicle's ride height. The system will also lower the ride height as speed increases. The use of speed control while driving on an interstate or an expressway allows your right leg to relax and reduce some of the fatigue you normally experience when constantly holding your foot on the accelerator. The control that the cruise control exerts over the fuel controller also results in better gas mileage. Cruise controls are designed for open roads and should not be used in city or urban settings or when driving uphill or downhill. Also note, you should not use cruise control when the road surface is slippery (i.e. rain, snow or ice). New advanced cruise control (ACC) systems can sense if you get too close to the vehicle in front of you. Radar beams look ahead of your vehicle. If the system detects a vehicle in front of you, the computer compares the vehicle's speed against your speed. If the closure rate is too fast, the system will slow you down and can activate the brakes if necessary. If you are approaching a vehicle at an unsafe speed, an audible warning will sound. The system can also detect if the vehicle in front of you is speeding up. There are several other new technologies emerging in our current vehicle market. Manufacturers are focused on making the traffic environment as safe as possible. Several years ago Anti-lock Braking Systems (ABS) appeared on the market. The ABS prevents your wheels from "locking-up," thereby enabling the driver to steer the vehicle while bringing it to a stop, especially on slippery surfaces. Now, advanced anti-lock brake systems have emergency assist. Advanced ABS systems exert control over the amount of fluid pressure being applied in the system based on need, allowing the driver more control. In addition, the system can detect an emergency stop situation and force more pressure to the brakes. Safety belts are now designed to react automatically to the force that is being applied to the occupants' bodies. These belts manage the distribution of force across the body, maintaining an acceptable range. New sensors also enable safety belts to provide pre-tensioning prior to a collision. Night-vision systems are also becoming an option. The night-vision system amplifies existing light, enabling drivers to see obstructions in the roadway that are invisible in night, low-light conditions. This technology is based on the "night-vision goggles" worn by military services around the world. The new night vision systems use infrared light beams located on the front of the vehicle. A thermal imaging or Forward Looking Infrared (FLIR) camera is mounted at the top of the windshield. It detects the heat generated by objects and develops a video presentation. The imagery is displayed on an existing monitor in the car or on a flip up screen. If you are driving at night, FLIR allows you to see animals and other heat generating obstacles alongside the road that your headlights can't pick up. You can also see pedestrians who are wearing dark clothing and in some cases you can see up to five times farther than you can using just your headlights. If you have difficulty parking and a budget to purchase a vehicle to solve this problem for you, "park assist" technology is available to do your parallel parking for you. It works using various sensors on the car. These sensors use Sound Navigation and Ranging (SONAR) sensors which transmit sound to detect objects and their distance. The sensors on the car detect the parked cars, and the gap between them. When you stop and put the car into reverse you activate a wide-angle backup camera. You push a button. The car creeps backwards
5.
Injuries to arms, hands, face, and eyes can be reduced or prevented during a collision when a driver-side air bag deploys.
•
Install side mirrors with angled surfaces, which might be helpful in reducing blind areas.
•
Intense or unexpected reactions
•
Intersections, freeway entrances, driveways, alleys, controlled multi-lane roads, etc.
•
Intervention Techniques
2.
It increases the distance needed to stop a vehicle once an emergency is perceived.
1.
It is less fatiguing because it allows a more normal position for your arms.
•
Keep headlights clean. Dirty lenses can cut the amount of light your headlights emit by as much as 90%.
•
Know Your Destination
•
Locating potholes and sudden changes in road surface conditions that might affect your traction and/or path of travel.
•
Look where you want your vehicle to go.
•
Looking at the ground beside a moving vehicle helps you to more accurately judge its speed.
•
Music
•
Narcotics
•
New or Unfamiliar Traffic Controls
•
Nicotine (tobacco)
carjackers generally do not want to deal with more than one person. Pay attention to other vehicles that are following you. If you think you are in danger, drive into high-traffic parking lots (shopping centers and shopping malls), drive to a police station, or use your mobile phone to call 911. Avoid driving in the far right lane. This lane is most vulnerable to carjackings. When stopped in traffic, always leave room between your vehicle and the car in front of you. This space cushion gives you an escape path to maneuver out of danger in the event a carjacker attempts to get into your vehicle. If you are carjacked, save yourself, not your car. Don't resist, immediately abandon your vehicle, run, and call 911. If an authorized police vehicle is approaching you, with its lights on, it is your responsibility to yield the right-of-way and immediately drive to the right-hand edge of the roadway, and stop. Remain stopped until the police pass you or stop behind you. If you are pulled over for a citation, for whatever reason, the officer expects your cooperation. Being stopped by the police may be confusing and you may become anxious or angry. These are natural feelings, but remember, traffic stops can also be stressful and dangerous for the police officer. Recognizing a Police Officer •
Police vehicles have BLUE flashing lights. • Police will position their vehicle behind your vehicle, typically not in front. They will not pull directly in front of your vehicle unless there is no other space. • Look for signage on the front of their vehicle. • Notice the uniform. • Police are trained to approach your vehicle with a very cautious posture. They will be on guard against aggression. If you are not convinced that the encounter is official, continue cautiously driving and proceed to a populated location. Turn on your hazard lights to communicate that you recognize their presence and are attempting to locate a safe location. Dial 911 and notify the dispatcher you are being followed and are concerned about your safety. When Stopped by Police • Remain in your vehicle unless the officer advises otherwise. • Keep your hands where the officer can see them, rest both hands on the steering wheel. • Avoid any sudden movements, especially toward the floorboard, rear seat or passenger side of the vehicle. • Do not reach for your license or other documents until the officer requests them. Many states require drivers to show their license, registration and insurance card to the police officer upon request. • If there are passengers in your vehicle, encourage them to remain quiet and cooperate with instructions. You, as the operator, are solely responsible for your vehicle and its occupants. • Be honest with the officer. If you really didn't see the stop sign, or were unaware of the speed limit, let the officer know. • Finally, if you receive a citation, accept it calmly. Signing it is not an admission of guilt
•
Nonpayment of jail fees (SB 603)
make sure your feet and hands are in the proper position. •
Notice the differences in the gearshift, windshield wiper switch, light controls, audio system, and heat and air-conditioning controls. • Before departing on your trip, take the vehicle for a test drive to get a feel for the controls, turning radius and braking systems. Check for differences in blind spots and the overall visibility from the driver's seat. Do not drive the rental car if you are not confident and comfortable with its unique handling characteristics. Is it time to move and you need to rent a moving van? You do not need a special license to drive a moving van. Practice maneuvering this large vehicle and become comfortable with its handling characteristics before your move and especially before navigating through busy cities or on small, rural or mountainous roadways. As an experienced small vehicle driver, you already have the mechanical skills necessary to drive a moving van. You are accustomed to operating standard features such as the automatic transmission, power brakes and steering. The challenge is making proper adjustments to the vehicle size, height and weight. Before Driving a Moving Van • Ask the rental agent to review routine maintenance and operational features. Also review the insurance coverage before leaving the facility. • Walk around the vehicle. Check to see that all doors are closed and secure. • Look up, notice the height of the moving van and take into account the additional clearance requirements. Check the tires and look for leaking fluids. Driving the Moving Van Familiarize yourself with the vehicle's handling characteristics. Try several acceleration and brake applications. Practice and get comfortable with the exterior mirrors. Get help in adjusting the mirrors. Practice backing and turning in both directions. You may need more room to swing out to make turns. Allow more time and distance to brake and accelerate. Frequently check side mirrors for vehicles around you, what they are doing, and whether they are keeping up with you, passing or falling back. Match your speed as closely as possible to the traffic around you. Keep a 4-second following distance between the moving van and the vehicle in front of you. Give yourself plenty of time for lane-changes and use your signals. Do not hesitate or linger once you decide to make a lane change, and do not slow down to merge. The wind being pushed by large trucks traveling at highway speeds can move a moving van out of its lane or even off the road if immediate steering corrections are not made. When you see them coming, in either direction, have both hands on the wheel and be ready to make slight steering corrections to remain in your lane. If you must drive in windy conditions, be sure to reduce your speed so you can maintain lane position. Remember to try to maintain the wheels in a straight line, even while the moving van yaws or rocks back and forth. If you over-correct, you may go into a skid. Parking Tips • Look for spaces to park where you can pull through to leave - avoid backing out. • Scan high. Many gas stations, driveways, and side streets have overhead obstacles. • Have a passenger get out of the van and assist you in parking. Backing and Maneuvering Have someone assist you when backing. Have your assistant give you very simple (non-verbal is best) directions. Keep in mind that just as you cannot see all you need to see, neither can your assistant, and you must also continue to look where you are going while watching your directions. If you are not fully confident that there are no obstacles in your way, get out and walk completely around the moving van. Look up, look down, and look around. Maneuver slowly. Traveling with children can be a joy and a challenge. You want to plan enough activities to keep kids happy and engaged, but you do not want to wear yourself out. Plan the Trip Together Children will behave better on a trip if they know what to expect and are actually looking forward and excited about it. The first step to a great travel adventure is planning the trip together. By planning travel with the children, you can share ideas and include activities that everyone will enjoy. Invite the child's suggestions, and incorporate their travel ideas when you can. Try to remind yourself of what it was like to be a child. Keep reminding yourself of that childlike point of view and you will be well on your way to planning a trip that everyone will enjoy. Safety First When traveling with children, it is important to make safety the first priority. • Make sure you bring and properly install a federally-approved child seat for each child that requires one. • Does the child have any health, diet, or activity restrictions you should follow? Keep them in mind when you plan the trip, and remember to keep your own limitations in mind. • When packing, be sure to bring enough of everyone's medication to last through the trip and ask doctors for written prescriptions so you can obtain refills in case the medications are lost. • Keep a list of emergency contacts handy, in case you have questions while traveling. • If you are bringing children that are not yours, obtain written permission from their legal guardians that you can travel with them and make medical decisions for them in case an emergency arises. • Make sure to bring fruit, beverages, and other healthy snacks to keep energy up and hunger at bay. Keep Them Busy Bring an MP3 or CD player with their favorite music, plus several books, games, and other activities that are easy to transport. Children enjoy activities that engage their minds and bodies, so while you are traveling or planning the trip, look for opportunities that include playing and learning. Keep them busy with fun activities to give them a chance to work off their energy. This will make quiet times, nap times, and bedtimes more pleasant. Try to be flexible, especially when traveling with children. Leave room in the schedule for spontaneous activities, and for those inevitable times when an event takes longer than you expected. Share Yourself In years to come, the children may not remember which museums or sights they saw, but they will remember having your loving and undivided attention. • Along the journey, share your memories, stories, and songs, and let the children share theirs with you. • Take a lot of photos, and when you get home plan some time to make a scrapbook together. Talk about the trip - what you liked, and even what you did not like. You can use this shared information to plan the next adventure. Traveling with children is a wonderful opportunity to create memories that will last a lifetime. • Consult with your veterinarian to be sure that all required vaccinations are up-to-date. Obtain a health certificate within ten days of travel. • Be sure your pet is properly identified with a current tag or a microchip. In addition to a standard identification tag (which should be labeled with your name, home address and phone number), your pet's collar should include a travel tag with information on where you are staying while away from home. Should your pet become lost, this will allow you to be contacted locally. • If your pet is not accustomed to car travel, take it for a few short rides before your trip. • Groom the animal before the trip. • Pack a water bottle, leash, and their favorite food and toys. • Pack a simple pet first-aid kit that includes assorted bandages, antiseptic cream, an antidiarrheal medication that is safe for pets (ask your veterinarian to suggest a product), gauze squares, and the phone numbers of your veterinarian, a national poison control hotline, and local 24-hour emergency veterinary hospitals. • Consider bringing along a portable kennel for use in hotel rooms or the homes of friends or relatives who are not comfortable with your pet loose when no one is home. On the Road Passengers, including your pet, can be a serious distraction. Do not allow the animal to run loose in the vehicle. Dogs who enjoy car travel need not be confined to a carrier if your vehicle has a restraining harness or if a passenger can restrain the animal. Cats should be confined to a cage or crate to allow them to feel secure and to avoid having a pet under your feet while driving. Establish a regular feeding routine - give the main meal at the end of the day or when you reach your destination. Feeding dry food will be more convenient, assuming your pet readily consumes it. Perform a daily "health check" on your pet when away from home. In unfamiliar surroundings, your pet's appetite, energy, and disposition may change. Watch for unusual discharges from the nose and eyes, excessive scratching or biting of any body part, unusual lumps, limping, loss of appetite, abnormal waste elimination, or excessive water consumption. Visit a local veterinarian if you are concerned about any physical or behavioral changes. Humane Society Guidelines • Dogs and cats should always be kept safely inside the car. • Pets that are allowed to stick their heads out the window can be injured by particles of debris or become ill from having cold air forced into their lungs. • Never transport a pet in the back of an open pickup truck. • Stop frequently to allow your pet to exercise and eliminate waste. • Never permit your pet to leave the car without a collar, ID tag, and leash. • Never leave your pet unattended in a parked car. On warm days, the temperature in your car can rise to 120° in a matter of minutes, even with the windows opened slightly. Furthermore, an animal left alone in a car is an invitation to pet thieves. Plan your vacation events so you and your passengers will have an enjoyable, stress free experience. Do not wait until the last minute to prepare. • Plan your route with designated locations for getting fuel, food and rest. Consider taking a route that maximizes your vehicle's operation and fuel economy. • On long trips, try to travel with at least one other competent, safe, licensed driver. Be sure you get enough rest before you get behind the wheel. • Stop, stretch and rotate drivers every two hours. Plan to eat lightly during the drive to avoid drowsiness. Never drive longer than 8 hours in one day. • Select a good travel and departure time to avoid fatigue, heavy traffic and inclement weather. • Pack emergency equipment. Do not over-pack or obstruct your ability to see in all directions. Reference your owner's manual for maximum load weight. • While fueling, or when paying for fuel, never leave your keys in the ignition and your money and other valuables in a location where they can be seen by others. Try to re-fuel during daylight hours. When renting a car, get an estimate of your total charges including all taxes, fees and any mandatory charges. Maximize coupons, deals and ways to save money. • Ensure any additional drivers are included on the rental agreement. • Before driving a rental car, become familiar with its features and understand its handling characteristics. Your vehicle can provide secure and mobile protection from threatening situations. Be acutely aware of your surroundings and safety at all times. Things happen that you do not expect, and you can eliminate some threats by using good judgment and safe practices. Keep your doors locked at all times and if you have a cell phone, keep the phone programmed to 911 and keep it in an easy to reach location. Do you know anyone who has been a victim of a stranger in a parking lot, car jacking, road rage, or broken down alone without help? This module is about personal safety. Topics include: • Safe Parking Practices • Dealing With Road Rage • Rest Areas • Carjacking • Being Stopped by the Police • Before parking and exiting your vehicle, remember your vehicle offers you a form of protection. You are safer in it than you are without the protection of your locks and steel cage. When you exit or travel to your vehicle in a parking lot, you are not protected from the elements and other dangerous situations. You might not be seen by another driver and could be hit. You might be selected as a victim of a crime. Select your parking location carefully, with an awareness of your situation. Park as close as possible to the building you are entering. Secure objects inside your vehicle so they will not be seen from the exterior. Park your vehicle in a well lit, populated area of the parking lot. If possible, back your vehicle into the parking space so you can drive out of the lot quickly. Walk where you can be seen by others. If you are alone, time your exit from the vehicle when others will be near by and easily see you. Avoid walking between cars or in dark spaces. Lock the vehicle and exit quickly. While walking in a parking lot you can carry your keys as a defensive weapon, with the keys between your fingers. Place the ignition key between your index finger and thumb. This provides you with protection and ensures quick entry into the vehicle if you are being followed. Also, if you have a key fob with a remote panic button, be prepared to push that to sound an alarm in your car. Enter your destination fast and directly. As a pedestrian, do not walk where you can not be seen or where you might get hit by another driver. Remote locking systems are convenient and nice to have for quick vehicle entry. Plan to enter your vehicle and exit the lot as fast as possible - others might be waiting for your space or for you to pause long enough to car-jack your vehicle. As you approach your vehicle, look around it and in the front and back seat for possible danger lurking. Be aware of your situation, personal safety and risk. If in doubt, seek safe shelter and contact help. Road rage occurs when an angry or impatient motorist or passenger intentionally attempts or succeeds in scaring, injuring or killing another motorist, passenger, or pedestrian. People have been shot because they drove too slowly or played the radio too loudly. Violent traffic disputes are often the result of personal attitudes and accumulated stress. Why does road rage happen so frequently? On the road, you are surrounded by stressed, emotional motorists who can be angered and extremely provoked by a seemingly small incident. Road rage has been attributed to: • Arguments over parking spaces • Cutting another motorist off • Refusing to allow passing • Minor traffic crashes • Obscene gestures • Loud music • Overuse of the horn • Slow driving • Tailgating • Failure to use a turn signal What are the warning signs and how can you as a driver avoid being a victim of road rage? Recognize Road Rage In Others Vehicle position is the best indication that another motorist is being overtly aggressive towards you. Be aware of signs such as being cut off, sudden reduction in speed in front of you, tailgating, continuous flashing of high to low beam lights, excessive horn use or inappropriate hand signals. Why Is It Happening? If you are experiencing these indications, in the majority of situations, your driving has triggered the road rage. Recognize this aggression and evaluate your driving behavior: • Did you cut someone off? • Are your high beams on? • Are you going slower than traffic? • Did you take someone else's parking space? • Did you use your horn or inappropriate hand communication? • Did you open your door on someone else's vehicle? • Avoid eye contact. In this situation, eye contact is perceived as a challenge. • Avoid stopping. Stopping is an invitation for conflict. • Position your vehicle as far away as you can from the aggressive driver. Change lanes and slow down. • If you exit, locate a highly populated area. Do not exit your vehicle, it provides you with protection and a way to exit the scene if your vehicle is assaulted. • In extreme situations, if you are having trouble removing yourself from the aggressor, drive to a location where you will have witnesses. The presence of other people could diffuse the situation and provide you with assistance if needed. Ideally, find a location where law enforcement officials are typically present such as a police station, court house, inspection station or hospital emergency room. • While locating a safe, populated location, know your location and dial 911. Describe your situation and request assistance. Do not engage or confront the other driver. Ensure you have an exit route until police arrive. • Do not drive directly home or to work. Don't Ask for Trouble While you are driving be courteous and conscious of your driving behavior. Avoid the following invitations for road rage: • Tailgating • Cutting other drivers off • Changing lanes without signaling • Frequently changing lanes by weaving back and forth • Making a turn from the wrong lane • Traveling in the left lane at a slow speed • Driving behind or toward other cars with your headlights on "high beam" at night • Blasting your horn • Slowing down in front of others right after you pass them • Reacting too slowly after the red light turns green • If you need rest or a break from driving on an interstate highway, avoid pulling off the road at an unfamiliar location. Rest areas are in place to encourage motorists to use a safe location off the roadway to take a break and return more alert to the highway. Rest areas are open, convenient and accessible to all motorists, regardless of age, disability or language. Good lighting and security features allow comfortable use 24 hours a day. The rest area system provides public stopping opportunities where they are most needed, usually between large towns and at the entrance to major metropolitan areas. Rest areas provide telephones, maps and public information. Information generally includes roadway conditions, tourist and recreational opportunities, motorist-related commercial services, public service bulletins, missing children information and information about the local history, culture and regional environment. If you are resting in your vehicle, lock the doors and hide valuables from view. Park your vehicle where there is light to discourage potential theft. If you are traveling alone, walk where you can be seen by others. Even in rest areas designed to be safe, be aware of your situation and be cautious of strangers and the dangers of parking lots and dark driving environments. • Carjacking is a crime of opportunity for a thief searching for vulnerable prey. For some gang members, it may be a rite of passage, a status symbol, or just a thrill. Cars provide quick cash for drug users and other criminals. Don't set yourself up to be a victim. Plan your trip ahead of time. Know where you are traveling and avoid high crime areas. If you have a mobile phone, make sure the batteries are charged and take it with you. Always have your keys or remote ready to unlock your vehicle. Don't spend time fumbling for your keys. The more time you take, the greater your risk of being carjacked. As you approach your vehicle, pay close attention to your surroundings. If you see suspicious persons or vehicles, do not go to your vehicle. Instead, walk to a safe place and call the police. Don't confront suspicious persons in or out of vehicles, let the police do it for you. Always drive with your doors locked and windows up. Avoid driving alone
•
Notice the direction your front wheels are turned. To avoid hitting something you may have to adjust the direction as you begin to move your vehicle.
•
Noticing shadows on the roadway might indicate a hidden vehicle ahead of a truck you want to pass.
•
Obey all traffic controls.
•
Obey traffic controls. Follow the regulations and warnings communicated by signs, signals, markings, and other traffic controls. Stay in your lane, do not weave. Stop, yield, and go as directed.
11.
Obscured vision
however, the road is still wet and it continues to present a low traction driving environment. •
On wet roads reduce your speed by 5-10 mph • If there are wet leaves on the road, reduce your speed by half When traction is poor, accelerate gradually. Steer with smooth, precise movements. Try to do one thing at a time - increase your following distance and avoid puddles and flooded areas of the road. Position your tires to follow dry tracks created by other vehicles in your path ahead. Be conscious of spray from your vehicle and other vehicles. Be considerate and go very slowly if you encounter pedestrians. Winter Driving Make sure you know what the weather and road conditions are before departing. If it is raining and the temperature is supposed to drop below freezing, then the moisture will begin to freeze as the temperature drops below 32 degrees. Ice might not be easily seen but it will still create a slick, low traction surface on the roadway. If it occurs on an asphalt road the condition is known as "Black Ice" and is a true hazard. Shaded areas, over passes, and bridges are locations that can conceal spots of ice. These areas freeze first and dry out last. Some of the most dangerous conditions occur when temperatures are hovering around freezing, when snow begins to turn to watery slush. The combination of snow and water can be extremely slippery. If you are forced to drive in windy conditions, and it is snowing, be cautious of snow drifts which make it difficult to pass and see. If the snow is melting just before the sun goes down, it is likely the temperature will drop at night, turning melted snow into ice. There are some basic tips for driving on ice and snow that will make the experience safer. Different types of snow have different degrees of traction: • Fresh, dry (powder) snow has more traction than packed, tight snow. However, be cautious of slick ice that may be hiding under the powder surface. • When you park, create an escape path for your tires in the snow. Drive past the space you want to park in, and back up. This creates a path with less resistance when you exit the parking space. Adjust your speed in icy conditions: • If you encounter packed snow, reduce your speed by half. • If you are traveling on ice, reduce your speed to 10-15 mph. During the winter, add a few steps to your pre-drive procedures: • As you approach your vehicle, check around the tires for frozen chunks of snow or ice. • Clean the tires and wheel well and knock off accumulated snow or ice. • Start the engine and let it warm up - turn on the defroster. • Clean snow off the windows, hood, and top of the vehicle. • If there is ice on the windows, scrape it off all windows
•
Other drivers
•
Position your vehicle with space to the sides and the front with an escape route, should you need it.
•
Practice "what if" scenarios before they occur in real life.
it's only a promise to appear in court at a later time. •
Park your vehicle in a well lit, populated area of the parking lot. If possible, back your vehicle into the parking space so you can drive out of the lot quickly. Walk where you can be seen by others. Vehicle position is the best indication that another motorist is being overtly aggressive towards you. Be aware of signs such as being cut off, sudden reduction in speed in front of you, tailgating, continuous flashing of high to low beam lights, excessive horn use or inappropriate hand signals. If you are being raged against, avoid eye contact, avoid stopping and position your vehicle as far away as you can from the aggressive driver. Change lanes and slow down. Drive to a location where you will have witnesses. Do not exit your vehicle. Do not engage and do not confront the other driver. Ensure you have an exit route until police arrive. If you need a rest or break when driving on an interstate highway, avoid pulling off the road at an unfamiliar location. Take advantage of the rest areas that are in place for motorists to have a safe location off the roadway when they need to take a break and return to the highway more alert. If an authorized police vehicle is approaching you with its lights on, it is your responsibility to yield the right-of-way and immediately drive to the right-hand edge of the roadway and stop after clearing any intersections.
•
Parking garages
•
Pass on the left. Pass other vehicles on the left and only when there is time and space to safely conduct the maneuver. On multi-lane or one-way streets, passing or overtaking on the right is permitted. This can be dangerous because it is more difficult for the driver being passed to see you.
•
Pedestrians present. Drivers must yield to pedestrians in marked or unmarked crossings. Drivers must also exercise "due care" to try and avoid hitting a pedestrian even if they are not in a pedestrian crossing.
•
Physical and Mental Effects of Fatigue
•
Physical fighting
•
Physiological Effects of Drugs
1.
Pick out a fixed checkpoint along the road ahead: a road sign, light post, or other fixed object.
however, the faster you travel, the more distance you cover while bringing the vehicle to a stop. If you are traveling 40 mph, in three seconds you will travel 180 feet. At 60 mph, the distance increases to 270 feet. At speeds of more than 50 mph, it also is important to identify an alternate path into which you can steer if the path is suddenly blocked. Your stopping distance may be greater than the distance you can see ahead. The following are steps for using the 3-Second Rule: 1.
Pick out a fixed checkpoint along the road ahead: a road sign, light post, or other fixed object. 2. As soon as the rear of the vehicle ahead of you passes the fixed checkpoint, start counting, "One one-thousand, two one-thousand, three one-thousand." 3. When the front of your car reaches the fixed checkpoint, stop counting. You are following too closely if you reach the fixed checkpoint before you finish counting three seconds. Maintaining Safe Margins of Space Page 3 of 9 When to Increase Your Following Distance The 3-Second Rule works fine when you are following vehicles that are moving in the same direction and at nearly the same speed as you. However, you would be unable to stop in time to avoid hitting intersecting traffic or a stationary object in the road you could not see due to a hill, curve, inadequate lighting, or weather conditions. Create a following distance greater than 3 seconds when: • Traction and visibility are reduced. • A driver behind you is trying to pass. • Following a large truck or vehicle with limited rear vision. • Following a large vehicle that is blocking your view of the road ahead. • Following motorcycles. • Driving on a hill or incline. • You are distracted. Maintaining Safe Margins of Space Page 4 of 9 Space to the Sides Space to the sides of your vehicle is also important for maneuvering around obstacles to the side. If possible, position your vehicle with a safe cushion of space to all sides. Space to the side can also be used as an escape route to avoid an unexpected hazard or threat ahead. In bad weather or if poor road conditions exist, more space on all sides might be needed to make adjustments in your path of travel. Space to the sides of your vehicle gives you a cushion to avoid others that might creep into your lane. If you are in the lane next to the centerline with oncoming traffic, position your vehicle in the right side of your lane. If you see a bicyclist in your lane ahead, position your vehicle in the left side of your lane. When managing space to the sides of your vehicle, remember the side mirror adjustments to ensure you see as much as possible to the sides of your vehicle. Avoid driving next to another vehicle or in a driver's side blind spots. Recognize your blind spots and keep out of that space to the side of other vehicles. Space for Merging Vehicles When you see a vehicle ahead approaching in the merge lane to your side, reduce the risk of collision by changing lanes. Create space to your side to allow the other driver a smooth merge without conflict. If there is no space to the side to change lanes, you need to speed up or slow down. Try to avoid slowing down because you risk being hit from the rear and the merging driver will have to accelerate, limiting his or her distance on the roadway. Side Space Conflicts When you have a hazard on your left and right, manage the hazard by slowing down and separating them. On a two-lane road, if there is a delivery truck that appears to be pulling into your lane on the right and an oncoming car in the left lane, slow down and let the oncoming car pass. Then use the open space in the lane on your left to create a safe cushion of space between you and the hazard on the right. Maintaining Safe Margins of Space Page 5 of 9 Space Behind Space behind your vehicle is important if you need to stop or slow quickly and it is also the most difficult space to manage. Space behind creates a safeguard or buffer from being rear-ended. Use the following techniques to help manage the space behind your vehicle: • Maintain a smooth, steady speed. • Do not slow down or stop without communicating to the driver behind you. Communicate your intention to stop or slow by tapping your brakes. • Prior to slowing, check your rear-view mirror for vehicles behind you. Maintaining Safe Margins of Space Page 7 of 9 Space in Special Environments Residential In a residential neighborhood, identify high-risk situations in time to avoid a collision. Sometimes you might have to enter an oncoming lane to allow enough space for the other road users such as children and small pets. Also, some neighborhood streets are narrow and vehicles are parked in the street, possibly blocking your lane. If your lane is blocked, a vehicle in the oncoming lane has the right-of-way, so stop in your lane and give the oncoming vehicle the space it needs to travel through. If you have to park on a narrow residential street, take note of the position of other parked vehicles across the street. Park your vehicle in a space that leaves enough room in the roadway for a large emergency vehicle to safely pass through. Parking Lots Parking spaces are designed to provide parking for the maximum number of vehicles in the limited space offered in the lot. The majority of parking spaces are designed to fit a mid-size vehicle well, with room to exit the vehicle without denting a neighboring parked vehicle. SUVs typically take up more room than the space was designed for. Managing space in a parking lot involves high concentrations of vehicles in close proximity to one another and vehicles pulling in and out of small spaces with obstructed vision. The vehicle that is already in the lane has the right-of-way, so allow it space to maneuver before you attempt to exit your parking spot. If you are waiting for a parking space, give the driver exiting plenty of space to maneuver. Many situations arising in parking lots with space issues and dented doors have been identified as potential road rage triggers. Disabled Parking Privileges: Special privileges are given to individuals who have a disability that affects their mobility
•
Predicting another vehicle is about to change direction by checking the position of another vehicle's tires.
•
Prepare to take action to manage the situation.
Allergy and Cold Pills - Antihistamines: Benadryl, Dramamine
Prescription and over-the-counter Drowsiness, dizziness, confusion, inattention
Amphetamines (diet pills, pep pills): Benzedrine, Dexedrine
Prescription for fatigue and mild depression Dizziness, hallucinations, hyperactivity, decreased ability to concentrate, headaches
Antibiotics - For infection: Penicillin
Prescription for infection Nausea
Sedatives - Barbiturates: Seconal, Nembutal
Prescription for insomnia, high blood pressure, epilepsy Drowsiness, impaired judgment, impaired reflexes
Anti-anxiety - Benzodiazepines: Valium
Prescription for mild anxiety Blurred vision, drowsiness, fatigue
Narcotics - Cough syrup and painkillers: Morphine, Codeine, Demerol, Tylenol with Codeine
Prescription for pain, cough suppressant and insomnia Nausea, blurred vision, drowsiness, impaired concentration
Tranquilizers - Librium, Valium
Prescription for severe anxiety and emotional problems Blurred vision, drowsiness, fatigue, faintness, vomiting, tremors, dizziness
•
Press hard or "lay" on the horn if you see a potential collision about to occur.
•
Prior to slowing, check your rear-view mirror for vehicles behind you
•
Prior to slowing, check your rear-view mirror for vehicles behind you.
•
Proof of legal presence (birth document issued by a U.S. state, jurisdiction or territory)
•
Proof of your social security number (SSN)
•
Properly maintain your vehicle.
•
Restriction. In a traffic jam, when drivers cannot get where they are going on time or at the expected speed of travel, anxiety builds up to "escape" the confinement of congested traffic. This anxiety causes drivers to perform aggressive maneuvers to get away from or get ahead of others.
•
Protect your passengers at all times.
•
Provide one proof of residency
•
Provide proof of identity and date of birth from the current acceptable ID list
•
Provide proof of legal presence
•
Provide two proofs of identity
•
Psilocybin (shrooms)
2.
Reaction distance - This is the distance traveled from the time your brain issues an instruction to the time your body carries out the instruction. An example of this would be the amount of time it takes to lift your foot and press the brake pedal. Perception and reaction normally require .75 seconds to 1.5 seconds for the average driver.
•
Reckless driving - speeding more than 20 miles per hour or more in excess of the maximum speed limit or driving in excess of 80 miles per hour regardless of the maximum speed limit (11 years)
•
Reckless driving-driving with an obstructed view (11 years)
•
Reckless driving-failing to give proper signal (11 years)
•
Reckless driving-faulty brakes/improper control (11 years)
•
Reckless driving-general (11 years)
•
Reckless driving-on parking lots, etc. (11 years)
•
Reckless driving-passing a school bus (11 years)
•
Reckless driving-passing at a railroad crossing (11 years)
•
Reckless driving-passing on the crest of a hill (11 years)
•
Reckless driving-passing or overtaking an emergency vehicle (11 years)
•
Reckless driving-passing two vehicles abreast (11 years)
•
Reckless driving-speeding in excess of 80 mph (11 years)
•
Reckless, careless or inattentive driving
•
Recognize how effectively your brakes operate. Have a good feel for the amount of pressure you need to "tap" on your brakes and the amount of pressure you need to apply to slowly decrease your speed and come to a smooth stop.
•
Recognizing Aggression Within
your risk of injury may be greater if you run off the road. Maintain control of the vehicle. Report the collision to the police and your insurance company. Livestock Animals are unpredictable and easily startled. Encountering animals on the road can be dangerous whether it is a herd of cows, a single horse and rider, or a wandering pet. When you are driving on rural roads, be aware that you could encounter livestock at any time. Farmers often use rural roads to move animals between paddocks, or graze stock at the side of the road. Watch for livestock if you see broken fences, open farm gates, or droppings on the road. If there are animals on the road or roadside: •
Reduce your speed and be ready to stop. • Do not sound your horn or rev your engine. Horses can frighten easily, behave unpredictably, and move into the road very quickly. Horses also have very good hearing and are easily alarmed by loud, unexpected noises. The average horse is so heavy, a collision with a car can kill the horse, its rider, and those in the vehicle. Do not overtake a horse as you would another vehicle. When approaching a horse in the roadway: • Slow down and give the horse plenty of room, especially on bridges or narrow roads. • Do not sound your horn or rev your engine. • Stop if the horse appears frightened. • At night, do not use high-beam headlights. Collisions with Animals If a smaller animal like a rabbit, cat, or dog crosses your path, do not swerve. Brake firmly if safe to do so. Small animals will do minimal damage to your vehicle if you cannot stop in time. Do not risk injury to yourself to avoid hitting an animal. Take extra care at sunset as the temperature cools
•
Reduction in your mental or physical abilities
•
Refusing to take a chemical test
Alcohol - Beer, wine, liquor
Regulated sales, age restrictions Impaired judgment, concentration and reasoning, nausea, blurred vision, drowsiness
•
Regulation. Government regulation, and all of the rules associated with driving, angers some people because they feel like it is an imposition, prompting them to disregard the rules because they do not agree with them or they are just rebellious.
•
Road signs and billboards
•
Roadway and written tests are not required for persons transferring to Virginia with valid driving privileges from the U.S., Canada, France or Germany.
•
Roadways
you may be approaching the scene of a collision. Do not follow too closely behind any fire engine, police car, ambulance, or other emergency vehicle. If you are the only person on the scene (other than those involved in the accident) DO NOT move any victim unless they are in immediate danger of sustaining additional serious or life threatening injury. Do not leave the scene - call 911 for assistance. In the event of a roadside breakdown, remain calm and prevent further damage or injury by moving your vehicle out of the roadway. If you park off the shoulder after a breakdown, be mindful of tall, dry grass. Set out warning triangles and flares in their proper positions to warn other traffic. Quickly exit the vehicle if you see smoke or fire, or if other drivers cannot see your vehicle. Wait in a safe location. If you are involved in a collision you are required to stop immediately. If possible, pull over to a location that minimizes traffic obstruction. Turn on your hazard lights. Vehicle Maintenance Page 1 of 8 Introduction Vehicle breakdowns can be costly, extremely dangerous, and put you in harm's way. Common vehicle failures include engine, brake, tire, and electrical failure. To prevent breakdowns, perform routine vehicle maintenance and vehicle inspections. Your vehicle's systems include: engine, fuel, exhaust, steering, braking, tires, electrical and lubrication systems. Each system requires maintenance. Regular servicing reduces problems associated with system failures. In addition to maintenance, the way you handle and maneuver your vehicle can extend your fuel economy and prolong the life of your vehicle systems. This module covers vehicle maintenance. The topics that will be addressed include: •
Routine Maintenance Checks • Checks Before and During Driving • Mileage-based Maintenance • Fueling Issues • Selecting a Service Facility As you approach the vehicle, look underneath and around it for any leaking fluids. Color indicates the type of fluid leaking out. Check your owner's manual to be sure of the color and appearance of the fluids in your vehicle. Common fluid colors and their indications include: • Red: Transmission fluid (check transmission seals) • Purple: Power steering fluid (check system) • Black: Motor oil (check the engine, and replace the oil) • Green or Orange: Coolant (check the water pump) • Clear: Water (usually normal condensation or water from the air conditioner) After Starting the Engine After starting the engine, check the following: • Instruments (ensure warning lights are off) • Fuel gauge (if it is below the half-way mark, plan to refuel soon) • Brake action (Push down on your brake pedal. If you feel no resistance, there is a breakdown of hydraulic pressure in the brake line. This indicates a possible brake failure. DO NOT attempt to drive
if your radio is on, turn it down or off so you can hear. Continue to inch forward until you can see past the obstruction and into the intersection. If another vehicle is approaching, it has the right-of-way. When your path of travel is clear, begin to accelerate and turn or go through the intersection. An intersection is a point where two or more roadways intersect. There are both controlled and uncontrolled intersections. As you near a controlled intersection, search the intersection to identify other road users. Locate traffic controls and begin to follow their direction. If you need to turn, look for special turn lanes. Reduce your speed. Yield to anyone that is already in the intersection. At the intersection, search left, center, right, and left again. If you approach a yellow or red signal in your lane, you are required to slow and be prepared to stop. After you stop, keep pressure on the brake and wait for the green signal. Remember to delay your start to avoid being struck by a red light runner. When the intersection is clear, maneuver your vehicle through the intersection. When you are stopped at an intersection, if your view is obstructed in any direction, your line-of-sight is blocked. Do not accelerate. Inch forward very slowly by easing off the brake. Continue to inch forward until you can see past the obstruction and into the intersection. If another vehicle is approaching, it has the right-of-way. When your path of travel is clear, begin to accelerate and turn or go through the intersection. Approach a railroad crossing with extreme caution. Look both ways, roll your windows down to hear, and be prepared to stop. If signal and bells are flashing and ringing, do not enter the intersection. Do not try to beat the train. Never stop your vehicle while over the railroad tracks or between the gates. Two-way roadways with a posted speed limit of 55 mph are typical in rural areas. These roads may have dangerous hills, curves and intersections. There are fewer vehicles, yet drivers travel at very high speeds. Rural roads have many unique, high-risk characteristics. These roads are dangerous because you are driving at high speeds often with only a lane marking that separates you from oncoming traffic. Typically there are fewer traffic controls. Most rural intersections are only controlled by stop signs. Occasionally, busy two-lane rural intersections are controlled by signals. This module is about the dangers and challenges of driving on two-way roadways. The topics that will be addressed include: •
Rural Driving Environments and Speed • Roadside Hazards • Driving on Hills and Mountains • Curved Roadways • Passing and Being Passed Rural or country driving involves unique characteristics and risk factors: • Fewer intersections (many hidden or uncontrolled) • Undivided, two-lane roads with oncoming traffic • Limited shoulders and guardrails • Wild animals • Horse-drawn carriages, farm equipment, and other slow-moving vehicles • Fewer vehicles, less traffic • Drivers tend to travel at higher speeds with lower seat belt use • Limited access to advanced medical care (in the event of injuries related to a crash, the average time to reach an emergency care facility in a rural area is 53 minutes versus 37 minutes in an urban area) Another risk associated with rural driving is boredom. When driving in the country, keep your mind focused on the task of driving. If you get bored, practice various "what-if" driving scenarios. Road Conditions Rural roads can be made of various materials and have many different surfaces, each with different and often low-traction conditions. Surfaces can include concrete, asphalt, brick, gravel, crushed stone, and dirt. Each of these surfaces affects traction quite differently. Rural roads can also be covered with water, wet leaves, or mud. Also, the surface might be rough, irregular (ruts) or have unexpected potholes or falling rocks. Some other characteristics of rural roads include narrow lane widths and poor lighting. Shoulders are typically small, sloped, or non-existent. This limits escape routes which are also difficult to navigate because of roadside trees, ditches, and steep embankments. When driving on rural roadways, surface and road conditions can change quickly with little warning. Be extra alert and watch for warning signs that communicate changes in road conditions. Because there are few intersections, they often appear when you do not expect them. Watch for indications that other traffic might be entering your travel path. Speed Posted speed limits on rural roads are often higher than in urban areas
4.
Schedule and plan to stop every two hours, get out and walk around.
2.
Scheduling your drives to avoid your circadian rhythm "low-times"
•
School zones and residential areas
•
Search Ahead
•
Search Behind
•
Search ahead, to the rear, and to the sides. Check the signal and if possible calculate an estimate when it will change.
•
Search around your vehicle for obstacles and debris. Look for potholes, rocks, nails, and slippery areas. Look for fluids leaking from the vehicle or for objects that were not there before you parked the vehicle.
it also reduces the contrast of important safety targets. If you suffer from allergies and have watery eyes, consider how that will affect your ability to see clearly before getting behind the wheel. Driver Readiness Page 3 of 10 Physical Readiness Neck and Head Movement Scanning to the sides and behind not only requires the ability to focus on the objects in the mirrors but the ability to move the neck and head quickly. A restricted range of motion reduces your ability to effectively scan to the rear and sides of your vehicle to observe blind spots, and can also hinder the timely recognition of conflicts during turning and merging maneuvers at intersections. Strength Strength and range of motion in the arms are related to the ability to turn the steering wheel and negotiate turns at intersections. Be sure you have enough strength in your arms to control your steering wheel in the event you lose your power steering. You also do most of your braking and acceleration with your leg muscles. Overall Physical Well-being Your overall physical well-being is essential to operate your vehicle safely. In order to react quickly and operate your vehicle, all of the muscles and parts of your body that move, push, and pull the controls must be responsive and strong enough to safely make these maneuvers. Allow another licensed driver to drive you if you are sick, injured, or have any other substantial physical impairment. Driver Readiness Page 4 of 10 Mental Readiness Mental readiness is hard to assess, but train yourself to do it. Be aware of your mental and emotional well-being. Extreme emotions such as anger, depression, sorrow, and anxiety can affect your ability to stay focused on the driving task. Excitement and happiness can also interfere with your ability to focus on driving. If for any reason you are mentally incompetent, even as a temporary condition, it is illegal to drive. It is also illegal to drive if any medical limitations may interfere with your ability to drive safely - this is not limited to chronic illness. Remember Virginia will not issue a license to individuals who have a physical or mental impairment which makes it unsafe for them to drive. Learn to recognize and assess your limitations before getting behind the wheel. If you determine your risks associated with being physically, mentally, or medically ready to drive are too high, consider alternative transportation choices such as walking, public transportation, or rides from family or friends Driver Readiness Page 5 of 10 Know Your Destination Before getting behind the wheel, it is important to know where you are going and the best route to get there. Drivers can avoid getting lost, wasting gas, and arriving late by knowing the destination and safest route before driving. Plan your route and departure times to avoid construction, hazards, and heavy traffic. Try to avoid high pedestrian areas and rush hour when other drivers are distracted and in a hurry. It is also a good idea to have an alternative route if you encounter a road closure or heavy congestion. If you have never driven to your destination, reference a map and know your directions before getting behind the wheel. Also, leave in plenty of time to allow for delays. Check the traffic and weather reports before driving. Prepare for wet weather or driving in ice and snow. If weather is extreme, use an alternative route and/or departure time, if available. Driver Readiness Page 7 of 10 Pre-drive Check Before driving it is important to be aware of any potential problems that you can fix or attend to before getting behind the wheel. Pre-drive checks help you avoid costly repairs, breakdowns, or loss of control that could lead to a crash. Vehicle Approach As you approach the vehicle, have your keys in your hand. Be prepared to enter the vehicle without delay - especially if you are in a busy parking lot. If you are parked on the street, next to a curb, approach the vehicle from the front. Don't enter the street with your back to traffic. •
Search around your vehicle for obstacles and debris. Look for potholes, rocks, nails, and slippery areas. Look for fluids leaking from the vehicle or for objects that were not there before you parked the vehicle. • Notice the direction your front wheels are turned. To avoid hitting something you may have to adjust the direction as you begin to move your vehicle. • Check your tires for proper inflation. • Ensure your lights and windows are clean and clear. • Check the area for other traffic, pedestrians, small children, or pets running loose. Keep track of those sharing the area around your vehicle. If your vision is obstructed, search around or under those obstacles for things that appear to be in motion. Mirror Adjustments Your mirrors should also be adjusted before every drive. Adjust your rear-view mirror to ensure you have a full view out of the rear window. Adjust the driver's side mirror by placing your head against the window and adjusting the mirror so you can see the rearmost left corner of the vehicle. Lastly, adjust the passenger's side mirror by positioning your head at the middle of the vehicle and adjusting the mirror so you can see the rearmost right corner of the vehicle. Driver Readiness Page 8 of 10 Driver Position Do not sit too low or too close to the steering wheel as this will limit your steering ability. Position the seat so that your chest is 10 to 12 inches from the hub of the steering wheel. In this position, if the air bag deploys, you reduce the chance of injury. If you are short and cannot reach the pedals from this position, check to see if your vehicle has adjustable pedals. If your vehicle is not equipped with this feature, check with your vehicle dealer or local automotive supply retailers to obtain pedal extenders. Proper seat positioning is now much easier with new technology such as adjustable steering wheels, adjustable steering-wheel columns, and adjustable power seats. Hand Placement The most comfortable position for your hands depends on your height, arm length, seat height and steering-wheel position. In the past, drivers were taught to place their hands at the 10 and 2 o'clock or 9 and 3 o'clock positions. However, today more flexible positions are encouraged. With the lower 8 and 4 o'clock hand position, you can smoothly turn the steering wheel nearly 160 degrees in either direction without crossing your arms. When you must turn the wheel more than 160 degrees, a preferred technique is called push/pull or push/pull/feed steering: 1. One hand pushes the steering wheel up in the direction you want to turn. Meanwhile, the other hand slides up toward 12 o'clock and then pulls down. 2. The hand you first used to push then slides down to make further adjustments as necessary. 3. To return to your original path, simply reverse the process or let the wheel slide through the fingers. Push/pull steering from lower hand positions has at least five major advantages over past hand placement methods: 1. It is less fatiguing because it allows a more normal position for your arms. 2. The 8 and 4 o'clock hand position is a lower, more restful position. The driver's arms stay close to the body and allow the body to be in a more upright and stable position. 3. You are more likely to keep both hands on the steering wheel allowing the muscles of the chest, back and shoulders to do most of the work. 4. Push/pull steering eliminates hand over hand and crossing the arms while steering. The hand over hand steering is a much harder procedure and it requires greater muscle strength. 5. Injuries to arms, hands, face, and eyes can be reduced or prevented during a collision when a driver-side air bag deploys. Driver Readiness Page 9 of 10 Driver Position Safety Belts Position the lap belt to fit snugly across your hips and not up on your abdomen. When the belt is fastened, take up any slack by pulling the belt firmly across your lap toward the lap-belt retractor. Use the tension adjuster to change the shoulder belt position and pressure against your chest. The shoulder belt should never be placed behind your back or under your arm. Passengers should not ride in the front seat with the back of the seat in a reclining position. Your body could slide forward, increasing the chance of both neck and abdominal injuries in the event of a crash. Head Restraint To get the maximum protection from painful whiplash neck injuries sustained in rear-end collisions, properly adjust the head restraints so they are close to the back of the head and no lower than the middle of the head. Driver Readiness Page 10 of 10 Review A crash occurs every 30 seconds. Before driving, assume you will be in a crash. Driver readiness lowers your risk. If you determine your driving risks associated with physical, mental, or medical limitations are too high, consider alternative transportation choices. Know your destination and plan the safest route. Plan an alternate route in the event you have an unexpected detour. Don't drive where you can't see. Most of the information you process while driving is visual. Before driving be sure you can focus on things near and far away. If you are sick, disabled, or your vision is impaired, have someone else drive. Position yourself to be able to steer, accelerate, and brake efficiently. 1. Sit straight behind the wheel with your back against the seat. 2. Adjust your seat so you can see and easily operate the controls. 3. Adjust the driver's side mirror so you can see the rearmost left corner of the vehicle. 4. Put a 10"-12" space between you and the wheel. 5. Adjust the head restraint so the top of it is even with the top of your ears. 6. Fasten your safety belt. Tell passengers not to recline in their seats. In the event of a crash, their bodies could slide forward, increasing the chance of injury. Eliminate unnecessary distractions or diversions. Loose objects become projectiles in a crash. Secure loose objects in the trunk or the cargo net. Secure yourself and your passengers and buckle up. Visual Search Page 1 of 11 Introduction We have discussed the importance of good vision and how you gather most of the information you need to drive safely using the information you receive from your eyes. About 90% of the decisions you make are based on what you see. What you are able to see without obstruction is called your "line-of-sight." The best condition for visual search is when your line-of-sight around all sides of your vehicle is not obstructed. When you can see well ahead, behind and to the sides, you can identify hazards, predict the conditions that you might encounter, and prepare to execute your driving maneuvers. When you drive, wherever you drive, be aware of the quality of your line-of-sight. Look far ahead at the center of your path of travel and practice an orderly search pattern. As you move your eyes, focus quickly and keep your eyes moving. To ensure you detect hazards in all directions, do not stare at anything or in any one direction for more than just a fraction of a second. Your visual search pattern should be conducted without interruption. Search ahead, check the rear-view mirror, check the side-view mirrors, search ahead, check the dashboard, and continuously repeat this cycle. As you conduct your visual search make a conscious attempt not to be distracted. This module will cover the techniques and reasons why it is important to conduct a thorough visual search. Topics that will be addressed include: • Search Ahead • Search to the Sides • Search Behind • Night Driving • Improving Your Vision Visual Search Page 2 of 11 Search Ahead Many drivers involved in crashes say "it happened so fast," "I didn't see" or "I couldn't stop in time." As a driver, you are often forced to respond quickly to a traffic situation. To have adequate time and space to avoid obstacles in your path you need to search the traffic environment far ahead of your vehicle. Position yourself with a clear line-of-sight so you can search the traffic environment about 30 seconds ahead. This gives you plenty of time to recognize obstacles ahead and maneuver around or away from potential traffic conflicts. To help judge how far ahead you need to look for the 30-second visual lead, pick out a fixed object like an overpass well down the road and start counting. If you reach the object before getting to thirty, pick out another object further down the road and try it again until you obtain the 30-second distance. The location of 30 seconds on the road ahead will vary depending on your speed. • Traveling at 25 mph, 30 seconds ahead is about two and one half blocks. • At 30 mph, 30 seconds ahead is close to two blocks. With a well developed 30-second scan technique, you pick up visual cues, process information and decide what to do next. This mental process takes time. After you decide what to do, you have already traveled a good distance and now you will still require a "control zone" of about 12-15 seconds ahead to safely execute your maneuver. This 12-15 second visual-control will give you time to identify a place or places to which you can steer, on or off the road if a potential problem situation develops into a threatening situation. The 12-15 second visual-control zone also gives you time to decide where to go if you cannot steer where you intended. Identification of alternate paths also becomes critical if you are in a situation where you may be struck from the rear. The following are clues that you are not looking far enough ahead when you drive: • You make frequent, quick stops. • In traffic, you often find yourself boxed in a slow moving lane - this indicates you have not spotted problems ahead well enough in advance to avoid them. Visual Search Page 3 of 11 Search Ahead Scanning High If you drive a high profile vehicle such as an SUV or RV, it is critical to ensure you have clearance above, especially in places such as: • Parking garages • Fast food restaurant drive-up lanes • Service stations with a canopy • Tunnels and toll booths • Residential or rural roads with low-hanging trees • Your own garage Scanning Low Develop the habit of observing the ground for changes in road traction conditions and for shadows that might indicate hidden hazards, such as children between parked cars. Other benefits of using low scanning techniques include: • Looking at the ground beside a moving vehicle helps you to more accurately judge its speed. • Predicting another vehicle is about to change direction by checking the position of another vehicle's tires. • Locating potholes and sudden changes in road surface conditions that might affect your traction and/or path of travel. • Noticing shadows on the roadway might indicate a hidden vehicle ahead of a truck you want to pass. Visual Search Page 4 of 11 Search to the Sides When approaching places where others may cross or enter your path, look to the sides to make sure no one will enter your travel path. Conduct your search to the sides by scanning such things as: • Intersections, freeway entrances, driveways, alleys, controlled multi-lane roads, etc. • Crosswalks and roadside areas • Railroad crossings • Parking lots • School zones and residential areas Intersections Before you enter an intersection, search for threatening objects and conditions to the left - vehicles you will encounter first will come from this direction. Look ahead and then to the right. Often drivers fail to see vehicles to the right. Be aware that you are most likely to be hit by a vehicle coming from the right. Take one last look in both directions before you pull into an intersection in case you missed something the first time. Do not rely solely on traffic signals at an intersection. Look to the left and right even though other drivers have the red light or stop sign. Drivers often fail to stop for stop signs, and in many areas, several vehicles may run red lights during rush hour. Before crossing an intersection, be sure you have an adequate view. If your line-of-sight is blocked, slowly edge forward until you can see. If other vehicles are blocking your view of another lane, it is best to wait until they move. Crosswalks and Roadside Areas As you turn a corner, watch for pedestrians about to cross the street in your path. When a right-turn-on-red is permitted, always yield to pedestrians in the crosswalk. Whenever there is a lot of activity or there are roadside business entrances along the side of the road, use active scanning to the sides. Be cautious for obstacles when driving near: • Shopping centers • Parking lots • Construction zones • Playgrounds, school yards • Busy sidewalks • Residential areas Railroad Crossings Approach a railroad crossing with caution. Search and roll your windows down to hear, and be prepared to stop. Search as you approach a railroad crossing
•
Search the intersection and the roadway for traffic controls, pedestrians, and other users.
its purpose is to warn drivers of a pedestrian or school crossing. HOV or Diamond Lanes In high traffic areas, many cities and states have carpool lanes which are called diamond lanes or High Occupancy Vehicle (HOV) lanes. The HOV lanes are clearly marked with a large white diamond in the middle of the traffic lane. The rules and regulations for use of these lanes vary. If you are driving a vehicle with two or more people in it, you are driving a high occupancy vehicle and qualify to use the HOV lane. Some HOV lanes have specific time restrictions and require tolls. Some states allow motorcycles or alternative fuel vehicles to use the HOV lane with a single occupant. Alternative fuel vehicles with qualifying plates issued before July 1, 2006, may operate in any HOV lane, no matter the number of passengers. Individuals with plates issued after July 1, 2006 can operate in all HOV lanes statewide, with the exception of the I-95/395 corridor, unless the appropriate number of passengers are in the vehicle (�33.146.2). Travel in these lanes only if you meet the criteria for the drivers in these designated lanes. Watch for exit signs far to the right, and then look for broken lines that allow you to exit. Never cross double or multiple yellow lines. If you violate the regulations and get caught in an HOV lane it is considered a moving violation and the fine is expensive - some states fine over $350 and assess points on your license. As a driver, you are responsible for knowing the HOV laws in Virginia. Virginia allows vehicles bearing clean special fuel license plates to operate in HOV lanes if they are in compliance with federal law in addition to the following (HB 85 & SB 209): • Plates issued prior to July 1, 2006, may use any HOV lanes statewide, regardless of the number of passengers. • Plates issued on or after July 1, 2006, may use any HOV lanes except those in the I-95/395 corridor, regardless of the number of passengers. Controlled Entrance Ramps Some urban areas have traffic signals that control traffic as it enters the expressway. These signals are often used during rush hours to provide interval space for vehicles to enter. Follow the signs and wait for your green light. Be prepared to accelerate quickly or decelerate to enter the traffic flow. Position your vehicle in the proper lane well ahead of the intersection or turn. Follow this procedure when approaching a controlled intersection with multiple turn lanes: •
Search the intersection and the roadway for traffic controls, pedestrians, and other users. • If you need to change lanes, check your blind spot in the direction you are about to maneuver. • Signal your intentions. • When you have identified a safe gap, change lanes. • Identify multiple turn lanes and watch for road markings. Select the lane you want to travel in well in advance. • Search ahead, to the rear, and to the sides. Check the signal and if possible calculate an estimate when it will change. • Adjust your speed and position your vehicle to minimize conflicts. • As you approach the intersection, continue to search for pedestrians and conflicts. • Watch for oncoming vehicles that are turning in the same direction. Shared Left-turn Lanes Sharing a lane with oncoming traffic to make a left turn can be dangerous. Safe guidelines for using a shared left-turn lane include: • Do not move into the lane too soon. The longer you stay in the lane, the more likely you will meet someone coming in the opposite direction. • Watch for vehicles pulling out of entrances and side streets. They may cut in front of you or turn into the shared lane and wait for a gap in traffic. • Do not use a shared left turn lane as a through lane. If you do not want to turn, stay out of the lane. Never use the center lane for passing. Reversible Lanes On a three- or five-lane highway, a double broken yellow line on either side marks a lane in which traffic changes direction at different times of day. The double yellow, broken line indicates a reversible lane. Reversible lanes are designed to move large volumes of traffic in the same direction. They are used during rush hours, at the conclusion of large sporting events and when large organizations such as military bases "let-off" for the day. When the traffic needs to go in the opposite direction, the lanes are reversed, or traffic is directed to go in the opposite direction. Reversible lanes are marked with unique signs, signals, and markings. A red X means the lane is closed. NEVER drive in a lane with a red X displayed. A solid yellow X means move out of that lane to a lane displaying a green arrow. A flashing yellow X means use this lane ONLY for a left turn. The lane is unprotected, so only enter this lane just prior to your turn. Check the lane to be sure traffic is clear before turning. A green arrow, pointing at the road means the lane is traveling in your direction. Use this lane to travel. Construction Signs and Barrels Orange, diamond shaped, or rectangular signs alert drivers of construction zones. Be ready to slow, stop, or drive around equipment and workers. Travel through construction zones carefully and follow the directions received from construction workers or law enforcement officers. Be cautious about your position in the lane
•
See and be seen. Communicate your presence to other road users by always driving with your daytime running lights or low-beam headlights. Remember, if you cannot see them, they probably cannot see you.
do not forget to look behind. •
See and be seen. Communicate your presence to other road users by always driving with your daytime running lights or low-beam headlights. Remember, if you cannot see them, they probably cannot see you. • Look where you want your vehicle to go. • Avoid distractions. • Avoid sudden steering and braking movements. • Be a considerate driver. • Keep your vehicle in good mechanical condition. • Practice "what if" scenarios before they occur in real life. Your Risk in the Driving Environment Page 8 of 8 Review In the driving environment, the chance of injury, damage, or loss is always present. Recognize how your driving environment changes each time you get behind the wheel - weather, road conditions, your vehicle, and other drivers are unpredictable. Develop the habit of evaluating each of those risk factors, including your own well being, every time you drive. Since it is nearly impossible to determine the level of risk in specific driving situations accurately, the following are some guidelines that can help you assess risk more accurately: • Consider the probability of a dangerous event developing. • Consider the consequences of your decision. • Prepare to take action to manage the situation. Evaluate these elements for their risk potential before and during your drive. • Evaluate your risk as the driver. Consider things such as fatigue, impairment, allergies, and illness. • Assess the conditions of the roadway and your route. • Conduct a pre-drive inspection of your vehicle. While driving, if you encounter a worse scenario than you anticipated, consider the consequences and make a safe decision on how to proceed. Sharpen your driving skills to help lower your risk. Below is a content review based on your incorrect quiz responses. To help manage risk, it is essential that you remain alert to conditions or objects that can increase levels of risk. Make sure to signal, adjust your speed and space as needed, and search the entire traffic scene for hazards. If you are applying for a Virginia driver's license, learner's permit or identification card, you will be required to provide proof of identity. To obtain an ID card, an applicant must provide one Primary Identification Document, such as a United States passport or birth certificate. Driver Readiness Page 1 of 10 Introduction Driver readiness requires physical and mental well-being. You need to be able to move your arms, legs, and neck freely and without pain. You need good vision. You also need to be alert and rested. Your brain needs to make many decisions while driving and your body needs to be able to react quickly. Before getting behind the wheel, evaluate your capacity to safely operate your vehicle. There are many things to consider when preparing to drive. Risk assessment begins with you, the driver - before getting behind the wheel. This module covers how drivers can prepare themselves for driving. The topics that will be covered include: • Physical Readiness • Mental Readiness • Know Your Destination • Pre-drive Checks • Driver Position Driver Readiness Page 2 of 10 Physical Readiness When you drive, you get information from most of your senses. You see, hear, smell, and feel the motion of the vehicle - all of this input helps you to be aware of your driving environment, to predict what might happen, and to assess how to react. This information is processed by your brain and keeps you aware of changing situations. Sensory input helps your brain understand and decide when to accelerate, steer, or brake. You also need to be in general good health with no injuries or illness that might prevent you from operating your vehicle safely. Vision Vision is the primary sense used in driving. About 90% of the information required for safe driving relates to vision. Since 90% of the information required for safe driving relates to vision, the degree of accurate vision is essential. Visual acuity refers to the clarity or clearness of one's vision, a measure of how well a person sees. Visual acuity is a measure of the ability to identify black symbols on a white background at a standardized distance as the size of the symbols is varied. This acuity is dependent upon the retinal focus, the sensitivity of the nervous system elements, and the manner in which the brain interprets the information. The well-known phrase "20-20 vision" refers to the ability to read given letters at a standard length of an eye exam room, specifically the distance from the patient to the acuity chart, which is typically 20 feet. Good driver vision includes: • Contrast sensitivity • Substantial visual field of view • Glare recovery Contrast sensitivity is the capacity to sharply see the difference between two similarly colored objects. Often pavement markings are worn and tend to blend into the road. This can affect your ability to locate the lane boundaries and where the edge of the roadway is located. When driving, the inability to see the difference in contrast also affects distance judgment. An adequate visual field of view means you are able to see objects in the periphery. Horizontal and vertical peripheral vision enables you to see up, down, and to the sides. This ability is necessary for detecting signs, signals, vehicles, pedestrians, cyclists, etc., outside of the field of view directly ahead. Glare recovery refers to the ability to see in the presence of oncoming headlights, at night, or in the presence of sun glare in daytime. Glare introduces stray light into the eye
•
Sensitivity to bright light
•
Service stations with a canopy
•
Shopping centers
•
Sounding of your vehicle's horn unnecessarily
Types of Drugs - Examples
Source Known Side Effects
•
Shouting, honking, swearing, name-calling
•
Shouting, swearing, name calling
•
Signal your intentions.
•
Signal your intentions. Always communicate your intention to turn or change lanes by using your turn signal at least 100 feet prior to the maneuver.
•
Signs
and grooming, such as applying make-up. Passengers also have a large potential to distract the driver. Control conversations and actions of those sharing the vehicle with you - including children and pets. Outside the Vehicle You have no real control over events that occur outside the vehicle. You can plan your route to avoid construction zones and watch the traffic report to avoid congestion. When driving, you consistently encounter events that are unexpected - prepare for them by being focused on the task of driving while your vehicle is in motion. Before driving, become familiar with the features of your phone and program the numbers you use most often. If you have a phone in your vehicle, do not use it while the vehicle is in motion. To avoid the distraction of it ringing, turn the phone off or set it to go to voicemail. If you need to have a conversation, pull over and use the phone only when you are parked in a safe and secure location. Text messaging or surfing the internet on your wireless device while driving takes your hands off the wheel and your eyes off the road. This makes using a wireless device a distraction with one of the highest risks. When texting you are not looking at the road ahead and you are not using your hands to control the direction of your vehicle. To compound the risk, using a wireless device requires your thought process to be diverted from the task of driving. Text messaging and emailing are prohibited by all drivers except for operators of emergency vehicles. Texting violations are now a primary offense, so they can be the reason why a driver is pulled over. A violation of this law is a traffic infraction, carrying a penalty of $125 for the first offense, and $250 for the second and subsequent offenses. If the driver was texting at the time of a reckless driving offense, they will face a mandatory minimum fine of $250 (§46.2-1078.1, §46.2-868). If you are traveling at 60 mph, you will travel almost the length of a football field in 3 seconds. A lot can happen in that amount of time with your eyes off the road and hands off the wheel. Manage Your Music Program stations in advance. Load CDs and ensure they are not loose inside the vehicle. Keep the volume down so you can hear events outside of the vehicle. If you need assistance, have your passenger adjust the audio device. Manage Telematics The new high technology systems being introduced into today's vehicles such as in-vehicle navigation systems, embedded cellular phones and forward looking infrared warning systems offer incredible capabilities to the operator. However, they also bring with them distraction from the task of driving. The new technologies can actually place inordinate mental and physical demands upon the driver at very inopportune times. Studies done by the National Highway Traffic Safety Administration (NHTSA) have shown that operating the controls on in-vehicle navigation systems impacts the ability to control the vehicle. The most distracting telematic activity, resulting in the greatest number of momentary losses of control was inputting data into a navigation system using touch keys. Follow the manufacturer's warning and only input data when your vehicle is stopped. If you have a passenger in your vehicle let him or her operate the system for you. Passengers are serious distractions. Keep passengers and conversation to a minimum. Try to let the passengers do most of the talking. Refrain from emotional conversation and do not look at your passengers when you are talking with them. You are not the entertainment. If you are traveling with children, plan to keep them occupied with a quiet activity. Ensure they are safely secured and cannot move about the vehicle. Manage Grooming Avoid this distraction because it takes both your hands off the wheel and your eyes off the road. Manage Reading And last, one more common driving distraction that often occurs without noticing how often you do it ...reading. Reading includes looking for street signs, reading maps, or trying to follow directions. Reading takes your focus away from driving and your eyes off the road. Avoid this distraction by knowing your destination before getting behind the wheel. If you need directions, stop your vehicle, then read the map. If you have a passenger, have him or her assist you in locating your destination. Manage Eating and Drinking Plan to eat in advance of driving. On long trips, stop to eat and obtain rest so you do not get fatigued. If you have to eat, purchase car-friendly food. Prepare drinks so they fit in your vehicle's drink holder and will not spill. Plan ahead to minimize the mess of eating and drinking and the distraction that goes with it. Inattention and distractions are dangerous because they take YOUR MIND off of driving. Inattention is a general lack of focus on the task of driving. Stay focused on the task of driving because in one split second an unexpected event can occur, and you have to be ready to see it and react quickly! Most distractions are outside of the vehicle, and you cannot control them, but you CAN control the urge to look and stare. Do not take your eyes off the road ahead and keep both hands on the wheel so you can control your vehicle. Plan your route to avoid distractions outside of your car. Keep in mind that there are occasions when your vehicle can become a distraction. When engaged in a conversation, even on a hands free phone, the conversation involves your thought process and often emotions, which take your mind off driving. If you need to have a conversation, pull over and use the phone only when you are parked in a safe and secure location. If you need directions, stop your vehicle and then read the map. Groom yourself before your vehicle is in motion. Control your passengers - while you are driving, you are responsible for their lives. If you have to eat or drink, buy "car-friendly" food and get it ready before you are in motion. Enjoy the radio and CDs... load your CDs and set your radio stations before driving. Keep the volume down so you can hear events that occur outside of the vehicle. Watch out for others who are not paying attention - they are everywhere! And always stay focused behind the wheel. The highway transportation system uses traffic control devices to visually communicate messages to drivers using signs, signals, and road markings. Traffic controls are necessary to ensure orderly, predictable movement of traffic. Transportation professionals create traffic rules and regulations with careful consideration of driver capabilities, roadway structure and vehicle crash history. Signs, signals and markings warn you of changing road conditions, tell you what to do, and help guide your way. Not obeying traffic signs and signals is a leading reason for fatalities on our roadways. This module is about the purpose and meaning of road signs, signals, and markings. Topics include: •
Signs • Signals • Markings • New or Unfamiliar Traffic Controls • Responding Appropriately to Traffic Controls Traffic engineers use signals in combination with signs and markings to help control busy streets, roadways, and highways. Signals are bright enough to be easily seen both day and night. They are positioned to be seen above and to the side of traffic flow. New signals may be seen mounted on mast arms across the intersection to improve visibility by keeping the signals in the driver's forward field-of-vision. It is important to recognize signals well ahead of an intersection to have plenty of time to plan your maneuver. To improve the visibility of signals in advance of the intersection, traffic engineers are beginning to install larger signals. The old standard was the use of 8" lenses. Now 12" lenses with light emitting diode (LED) are replacing the old signals in many communities. These lenses provide brighter light which is easier to see from a distance. In addition, on roads running in east and west directions, backplates are being added to signals to improve their visibility at dawn and dusk. Always obey traffic signals - it is the law. At a red light, stop your vehicle before entering the intersection. Stop with your front bumper positioned just before the stop bar. Remain stopped until the light turns green, check for any traffic and when it is safe, proceed with caution through the intersection. Right-turn-on-red is allowed in most states. If there is no sign that prohibits a right-turn-on-red, come to a full stop. Yield to other vehicles, pedestrians, and bicyclists. When there is no traffic in the intersection, and a safe distance with no cross-traffic, complete your turn. Yellow or amber means the signal is about to turn red. Prepare to stop at an intersection when you see the yellow light. If you are too close to stop safely, go through the intersection with caution. To avoid a violation, you must completely clear the intersection before the light turns red. It is illegal to enter an intersection after the signal turns red. Green lights mean cross traffic should be stopped, but it doesn't necessarily mean it is safe to go. Enter the intersection after scanning to be sure it is clear of traffic. The most dangerous time to enter an intersection is immediately after the light has turned green
•
Slowing down or "rolling through" a STOP sign is not enough and is against the law. Stop before your vehicle enters the crosswalk. If there is no crosswalk present, stop your vehicle just before your front tires reach the bold stop bar marking on the pavement. If there is no stop bar, drivers should stop at the point nearest the intersecting roadway where they have a view of approaching traffic before entering the intersection.
•
Space Ahead
•
Space in Special Environments
a crash which could result in financial loss, injury, or death. We begin this course by investigating what causes fatalities on our highway system, the responsibilities we all have as drivers, and how to reduce your risk of being involved in a crash while you are driving. The first module of the course covers the traffic safety problem we all face as a society. Topics include: •
Surviving the Drive • The Highway Transportation System • The Cost of Crashes • The Leading Causes of Fatalities • The Social Responsibilities of Driving Surviving the Drive Driving a motor vehicle involves the conduct of skilled and properly timed actions under varying road and traffic conditions based on decisions that depend on: • Learned Information • Realistic Perceptions • Sound Judgments You already know how to drive. Using skill, knowledge, and obeying the rules of the road is the first step to improving your chances of surviving a crash. Next, you need to stay focused on the task of driving and have a realistic perception of your risk and an understanding of why you need to be focused on the task of driving. You need to be aware of the environment you are driving in and the changes other drivers are making in their speed and direction. Lastly, when you know what to do and are alert to the situation, you need to exercise sound judgment. There are several techniques to help you detect and avoid hazardous situations while driving. These techniques will be presented in depth to help develop your driving survival capabilities. The Traffic Safety Problem Page 3 of 7 The Highway Transportation System The Highway Transportation System (HTS) is a complex, integrated system made up of three elements: • Roadways • Vehicles • Drivers In a perfect driving world, these elements would always be in top condition, making it much safer when you are driving. Even if the conditions are all very good, every other road user around you presents an uncertain and unpredictable risk. In reality, even if you think the condition of each of these elements is predictable, one or all of them may quickly and unexpectedly change. Roadways Roadways are classified by their function and surface condition. Roads that function as expressways and divided highways are traveled at high speeds and consequently have a greater risk of high-impact crashes. Slick or wet, low-traction surface conditions make it hard to control the speed and direction your vehicle is traveling. Consider how your drive becomes much more dangerous when your tires fail to grip the road because of low-traction conditions. Vehicles We drive and are surrounded on the road by many types of vehicles that have unique handling and operating characteristics. Motorcycles are smaller than cars and difficult to see. Large trucks can block your line-of-sight. As other vehicles present problems on the road, it is important to be confident that your vehicle is safe, all systems are fully operational and in good condition. Drivers There are many attentive, good drivers on the road with us. However, never let your guard down to the fact that sick, tired, angry, distracted, and impaired drivers can also be sharing the roadway. If you, as a driver, are not in good condition, take that into consideration before getting behind the wheel. The HTS is designed to move and manage all of these different vehicles and drivers around the roadways. Traffic engineers and lawmakers have designed the roads, laws, and traffic controls to help drivers anticipate and predict what other road users are about to do. These efforts are in our best interest and reduce the chances of our crashing into each other. In our integrated transportation system all drivers have to depend on each other to follow the rules. The Traffic Safety Problem Page 4 of 7 The Cost of Crashes Motor vehicles play an extremely important role in our lives and our economy. Without them, most of us could not get to work, go to the grocery store, or travel outside of our own community. However, it is imperative that we understand the potential losses associated with motor vehicle collisions and unsafe driving practices. Injury and death associated with traffic-related crashes is one of our largest societal problems. Consider the following personal and societal losses resulting from traffic collisions compiled from data collected by the National Highway Traffic Safety Administration (NHTSA): • The number of injuries and deaths due to collisions is considered to be of epidemic proportion. In 2008, 37,261 people lost their lives and 2,346,000 were injured in motor vehicle crashes (NHTSA). • Among those killed, teenage drivers have the highest death rates per miles driven among all age groups, followed by elderly drivers, and young adult males. • In 2008 there were 5,811,000 traffic collisions reported. These collisions cost the national economy over $230 billion as they relate to property damage, medical costs, insurance premiums, and lost time at work. In addition, the cost of personal or family disruptions as well as mental and physical suffering can't possibly be measured in dollars. The Traffic Safety Problem Page 5 of 7 The Leading Causes of Crashes Every year, the NHTSA lists the main factors that contribute to or are associated with drivers and motorcycle operators in fatal crashes. This list is one that should stick in every driver's mind. More often than not, more than one of these factors contributes to a fatality on our roadway. We will first introduce this list and later on go through each of these factors in depth. The top 12 causes of fatal crashes. 1. Failing to maintain lane position. 2. Speeding. This is not just exceeding the speed limit
•
Traveling in the wrong lane
•
Traveling many miles per day in congested and low visibility traffic conditions. For example, driving to and from work during rush hour. When drivers are stuck and frustrated in heavy traffic, they lose their temper and this can lead to aggressive driving.
however, traffic conditions may alter this approach. Avoid collisions by adjusting your speed to change lanes, signal, and adjust to openings or closures in traffic. After you have entered the expressway, select the lane you want to drive in based on the traffic flow, road conditions, and how far you have to travel to your exit. Right lanes are used to enter and exit expressways and are often moving slower than the left lane. Sometimes entrance and exit ramps are located in the left lanes. If you are in heavy traffic at rush hour, use the center lane to avoid vehicles constantly entering and exiting in your path. Drivers who are already on the expressway and those entering both share responsibility to yield the right-of-way to avoid a collision. Never travel in between lanes, or straddle lanes. Select a lane and position your vehicle in the middle of the lane. Try to maintain an equal space cushion around all sides of your vehicle by adjusting speed or repositioning your vehicle. Drive in the center lanes through cities to avoid busy merging and exiting lanes. Watch the signs and do not get caught in a lane that is about to end or is designated as an "EXIT ONLY" lane for a route that you do not want to enter. Watch for unexpected exit and entrance ramps to the left. These are dangerous because the fastest lanes are typically on the left. Speed Limits You must not drive a vehicle on a highway at greater than reasonable speeds under current road conditions. Your speed must be restricted as necessary to avoid colliding with a person or vehicle anywhere near a highway. Any person operating a motor vehicle in the state of Virginia should abide by the following guidelines: •
The speed limit on most interstate highways and in designated rural areas is 65 miles per hour (mph). Some highways have a speed limit of 70 mph. The speed limit on interstate highways in areas not designated as rural, or on limited access and non-limited access highways is 55 mph. • The speed limit in residential zones is 25 mph unless signs show other limits. • The speed limit in business districts is 25 mph unless signs show other limits. • Near schools, the speed limit is 25 mph while children are outside or crossing the street. No matter what the speed limit sign states, you should never drive faster than 25 mph when the school ground has no fence and children are outside. • In special traffic lanes and construction zones, observe the signs for different speed limits posted. • Blind intersections are intersections where you cannot see for 100 feet in either direction during the last 100 feet before crossing. You should drive no faster than 15 mph and be able to stop if a vehicle pulls out suddenly. A person who exceeds the speed limit near a school when children are present or near a worksite when workers are present faces a fine up to $250 (VC 46.2-873). Driving at an excess of 20 mph above the speed limit, or at 80 mph is classified as reckless driving. This is considered a Class 1 misdemeanor and can result in a $2500 fine and a 12 month jail sentence (46.2-852, 46.2-862). Go with the Flow If traffic is traveling faster than the speed limit, resist going above the posted limit. The best approach is to be a "loner" and try to position your vehicle between packs of vehicles. If this is not possible, position your vehicle in the lane that allows you to travel as close to the speed limit as possible without blocking traffic. Scan your mirrors for drivers speeding and weaving in and out of traffic. If you are traveling in a passing lane and are being tailgated, or if a driver flashes his or her high-beams at you, signal to change lanes and do so as soon as it is safe. Following Distance If you find yourself in a "pack" of vehicles traveling close together, drop back or move ahead by adjusting speed and space. Keep a 3-4 second following distance. If the road is slippery or wet, increase the distance to 6-8 seconds. Establish the interval by locating a large object such as a sign or overpass ahead. Watch the vehicle in front of you as it passes by or under the object. From that point, count the seconds it takes for your vehicle to pass the same object. When you are traveling the speed that it takes to count to four, you are traveling four seconds behind and have created a 4-second following distance. This is a safe gap to have between vehicles traveling the expressway - it provides time to react to an emergency under ideal conditions. Increase your following distance to 4-5 seconds if you have limited visibility, intersecting traffic, or a stationary object in the road. Avoid trucks and large vehicles' "no-zones." Recognize the blind spots of other vehicles and travel through them quickly to limit exposure time. Signal your intentions before you change lanes. Do not anticipate other drivers will open a gap for you if one does not exist - check your mirrors and blind spot before maneuvering. Use low hand steering to avoid over steering. Change lanes only when it is clear. Be courteous - if another driver drops back and creates space to let you in, communicate your "thanks" with a slight wave. Extend courtesy to other drivers who are trying to enter your path - create space for them to enter by slowing down, speeding up, or changing lanes. Passing and Being Passed Passing on expressways is dangerous because of the high speed and potential for traffic conflicts. Typically, passing is conducted on the left. Passing on the right is permitted if slower traffic occupies the left lane. Select a lane that allows others to pass you on the left. If you are being passed on the right, those drivers are hard for you to see and they are communicating that you are going too slowly for the lane you are in. Maneuver to the right as soon as it is safe. When passing, search and identify vehicles that might conflict with your maneuver. Signal. Check your mirrors. When it is clear, enter the passing lane smoothly. As you maneuver, position your vehicle with adequate space between your vehicle and the one you are passing. If you are going to return to the original lane, wait until you can see the front end of the vehicle you passed in your rear-view mirror. As you are being passed, position your vehicle so there is adequate space to the side you are being passed on. Keep your speed steady or slightly decelerate to assist the passer. Tollbooths As you approach tollbooth areas be aware of drivers that make quick, last second decisions and change lanes quickly without warning. Watch for clues. Well in advance of the tollbooth, look for signs that indicate which lane you need to be in. A green light indicates the open lanes. Select the appropriate payment option lane, signal, and position your vehicle in the proper lane. Be prepared to pay the toll (if applicable) well in advance, so you do not create traffic delays. Before driving on an expressway, make it a point to know your route. Memorize the exit, interchange names, and numbers. Watch for directional signs. Recognize the location (how far away the exit is) and the lane you need to be in well in advance of having to exit. As you approach the exit, signal, change lanes, and position your vehicle in the exit lane. Approximately 1/2 mile before you exit, signal your intention to exit. Predict the actions of other drivers who are using the same exit. Decide the correct speed. Adjust your speed. Check your mirrors, exit smoothly to the deceleration lane or into the exit ramp. Turn off your signal. Slow down and maintain a safe space cushion ahead and behind your vehicle. If you encounter a very short deceleration lane, watch for warning signs and be prepared to slow quickly. If you drive a high-profile vehicle, slow in advance of entering a tight, exit curve. Search for conflicts
•
Wandering, disconnected thoughts
•
Watch for clues about how slow you need to go before entering a curve. Look for advance warning signs and begin to reduce your speed as soon as you see the sign.
•
Watch for oncoming vehicles that are turning in the same direction.
•
Watch for vehicles pulling out of entrances and side streets. They may cut in front of you or turn into the shared lane and wait for a gap in traffic.
3.
Wear your safety belt - it "holds" you in your seat and your muscles do not tire so quickly.
3.
Wear your seatbelt - it "holds" you in your seat and your muscles do not tire so quickly.
•
Weaving from side to side
•
To yield the right-of-way means to allow another road user to cross or use an intersection or roadway before you do. At an uncontrolled intersection, if another vehicle is in the lane you want to enter, they have the right-of-way. This is true when backing out of a driveway or when you exit a parking space in a parking lot. Be prepared to slow down or stop if necessary to give the right-of-way to vehicles on the roadway. Proceed when safe to do so.
•
Traction and maneuverability are reduced.
•
Traction and visibility are reduced.
•
Traffic density and the rate of flow
it is designed to protect the occupants. To further protect you and absorb the harmful force of a crash, the passenger cage contains other restraint systems, such as your air bags and safety belts. The vehicle and the cage are reinforced on all sides - designed to keep it from collapsing inward. The crumple zone is the portion of the vehicle that is designed to give upon impact. Your steering column is designed to collapse or give way when your body comes in contact with it. In addition, newer vehicles have a lot of padding and no sharp edges to protect passengers from injuries. Speed and Physical Forces Page 5 of 8 Managing Speed Manage your speed to blend with the flow of traffic without going over the posted speed limit. Maintaining a safe gap between vehicles reduces front- and rear-end collision potential. Determine a safe speed to travel based on: •
Traffic density and the rate of flow. When you enter a congested traffic area, the space between vehicles is limited. Adjust your speed to open up space to maneuver. If an area is crowded with vehicles, you might be forced to drive at a slow speed. • The design and condition of the roadway. If road traction and surface conditions are less than ideal, reduce your speed to maintain traction. • How far ahead you can see. If you cannot see clearly or around obstacles, reduce your speed in the event you need to make an unexpected evasive maneuver. Adjust your speed when you encounter slow-moving vehicles. If a vehicle turns right from a stop into your lane, it will take time for that vehicle to accelerate up to the speed of traffic. Slow down or move into the passing lane early to avoid closing in too close behind the slow vehicle. Select the proper lane for the speed you travel: • When traveling on two lane roadways, the right lane is for slower vehicles and the left lane is for faster traffic. • On three lane highways, the center lane is for through driving, the right lane is for entering and exiting and the left lane is for overtaking. Speed and Physical Forces Page 7 of 8 Speed on Curves As you approach a curve, keep in mind that you cannot change the weight of your vehicle or lower its center of gravity. You cannot alter the sharpness of the curve in the road. But you do have control over one critical factor as you go through a curve, and that is your speed. Managing speed is critical to maneuvering safely through a curve. Follow these guidelines for managing speed through curves: • Watch for clues about how slow you need to go before entering a curve. Look for advance warning signs and begin to reduce your speed as soon as you see the sign. • Do not drive into the curve faster than the speed posted on the warning sign. • Try not to brake in the curve. Braking moves the weight of your vehicle sideways putting a strain on your tires, which could cause a blowout or rollover. • Do not increase your speed until you are through the curve and see a straight path ahead of your vehicle. Enter the curve SLOWER than the posted speed if: • Road conditions are slippery or if surface traction is less than ideal. • You are entering a blind curve that you cannot see around. • Your vehicle is tall and has substantial weight loaded high. Taller vehicles, trucks and SUVs have a higher center of gravity than most cars, and in turn, a higher risk of rollover. You move the center of gravity up if you pack cargo above the baseboard. If your vehicle has a high center of gravity, you will need to drive at reduced speeds, especially when entering and maneuvering through curves. Drive slowly through curves and as you approach the top of a steep hill. Be prepared to drive slowly downhill. Never drive fast downhill because with speed combined with the increase in the pull of gravity, you can easily lose control. Page 8 of 8 Review Speed influences crashes in five basic ways: 1. It increases the distance a vehicle travels from the time a driver detects an emergency until the driver reacts. 2. It increases the distance needed to stop a vehicle once an emergency is perceived. 3. Crash severity increases. 4. Higher crash speeds reduce the effect of vehicles' restraint systems and roadway safety features to protect occupants. 5. Traction and maneuverability are reduced. Stopping distances involve three factors: 1. Perception distance 2. Reaction distance 3. Braking distance Maintaining a safe gap between vehicles reduces front- and rear-end collision potential. Determine a safe speed to travel based on: • Traffic density and the rate of flow • The design and condition of the roadway • How far ahead you can see Managing speed is critical to maneuvering safely through a curve. Enter the curve slower than the posted speed if: • Road conditions are slippery or if surface traction is less than ideal. • You are entering a blind curve that you cannot see around. • Your vehicle is tall and has substantial weight that is loaded high. Maintaining Safe Margins of Space Page 1 of 9 Introduction Rear-end crashes are the most common type of collisions because drivers follow too closely behind the vehicle ahead. When there is not enough space or time to make a sudden stop or maneuver to the sides to avoid a collision, the crash is inevitable. Drivers who maintain a safe margin of space around their vehicle rarely have to make sudden steering or braking maneuvers. Maintain a safe margin of space in the front, sides, and to the rear of your vehicle. This will give you room and an escape route if you need one. The amount of space you need increases with higher speeds. The faster you travel the more space you need to react to situations on the roadway. This module is about how to determine a safe following distance and how to create safe margins of space around the rest of your vehicle. Topics include: • Space Ahead • When to Increase Your Following Distance • Space to the Sides • Space Behind • Space in Special Environments Maintaining Safe Margins of Space Page 2 of 9 Space Ahead Space ahead of your vehicle is important in the event you need to stop or turn to avoid an obstacle that is in front of you. You have the most control over the space in front of your vehicle. You can slow down to create a gap of space or if there is more room in another lane, you can change lanes. It is easier to just reduce your speed. If the driver in front stops suddenly and a collision occurs it is the 'fault' of the driver behind because that driver is responsible to travel behind another vehicle at a safe distance. A safe following distance provides enough space to avoid a collision by steering and/or braking. It is your responsibility to recognize how far you need to distance your vehicle and maintain that safe space, or following distance. Following Distance On dry pavement, with good visibility, allow at least a 3-second interval between your vehicle and the vehicle ahead. This rule works well for speeds up to 50 mph
•
Travel at a safe speed. Drive at a speed not greater than or less than what is safe. Make reasonable decisions about traffic, the road surface, and weather conditions that might increase risk or compromise your safety while driving. Based on your speed, maintain enough space in front of your car to allow you to stop without hitting another vehicle or object. Obey the posted speed limit.
•
Traveling at 25 mph, 30 seconds ahead is about two and one half blocks.
the wheel turns itself left and right as it is parking. The sensors constantly measure distance beeping faster and faster as you get close to other objects. Once you have parked, the computer will tell you the car is parked. Consider purchasing other assistive devices such as global positioning systems (GPS), rearward looking cameras, backing proximity sensors, lane departure warning systems, pre-crash systems and following distance warning systems. The NHTSA has decided to require automakers to include Electronic Stability Control Systems on all new vehicles starting in 2012. One study found that stability control could lead to a reduction of 10,000 incidents a year if all vehicles had the technology. About 40% of new vehicles have it as standard equipment already. Manufacturers are striving to put the most advanced safety applications possible into today's vehicles. Technology cannot compensate for poor driving - although it might help prevent or reduce the consequences of a crash. One of the first considerations when purchasing a new vehicle is vehicle size and weight. Small, light vehicles generally provide less protection than larger, heavier ones. Deaths and injuries are more likely to occur in small vehicles because there is less structure to absorb the energy of a crash. Electronic stability control (ESC) and traction control systems (TCS) are not designed to "take over" or replace the driver. They are designed to assist the driver in maintaining vehicle control. Cruise control reduces fatigue and can result in better gas mileage. Cruise controls are designed for open roads and should not be used in urban settings, when driving uphill or downhill, or when the road surface is slippery. ABS prevents your wheels from "locking-up", enabling the driver to steer the vehicle while bringing it to a stop, especially on slippery surfaces. ESC helps drivers maintain control in the worst situations. For example, if a driver enters a curve too fast, the vehicle may begin to spin out. The ESC engages automatically to help bring the vehicle back in the intended lane of travel. This technology lowers the risk of a fatal single-vehicle crash by about half, so it is worth shopping for. New safety belt sensors enable safety belts to sense pretension and imminent collisions. Night vision systems amplify existing light, enabling drivers to see obstructions in the roadway that are invisible in night, low-light conditions. As new vehicle technologies evolve, it is important to stay within the bounds of your driving capability. Always drive safely. Wherever you travel, be prepared to ensure a safe and successful trip. Plan your route and your vacation events so you and your passengers will have an enjoyable, stress free experience. If you take your own vehicle, begin to pack and prepare the vehicle a week in advance. Get yourself, your passengers, and your vehicle ready to make the trip - try not to put the preparation off until the last minute. This module presents some helpful guidelines for preparing to travel with your own vehicle, rental vehicles, and recreational vehicles. It also addresses issues that will help you prepare for traveling with children or a pet. This module covers preparing for a trip. The topics that will be addressed include: •
Trip Planning and Preparation • Rental Cars • Driving a Moving Van • Traveling with Children • Traveling with Your Pet Prepare your vehicle, yourself and your passengers to have a safe, predictable journey. Any time you get behind the wheel, your vehicle needs to be in good driving condition. For long trips, schedule your vehicle for service the week before you leave. Do not wait until the day before your trip since the vehicle may need repairs that could cause delays. Have a professional mechanic check the tires, wiper blades, brakes, fluid levels, exhaust system, belts, hoses, steering and alignment, lights and suspension. Your Route Begin planning well in advance by doing the following: • Plan your route with designated locations for getting fuel, food and rest. Have alternate plans to get to your destination by another route. • Preplan fuel availability. Most vehicles can travel approximately 300 miles on one tank of fuel. Check your directions and find populated places on the map that are less than 300 miles apart. On the open road, plan a fuel stop before your fuel gauge reads 1/4 of a tank remaining. • Go online and check the long range weather forecast for the areas you will be traveling through. Give yourself enough time and then add some time for unexpected weather delays. • Consider taking a route that maximizes your vehicle's operation and fuel economy. If you are pulling a trailer or traveling in a heavily loaded truck, SUV or RV, avoid routes with too many traffic signals and sharp curves. You will save on fuel cost by traveling on limited access highways. Other Considerations • Be sure you get enough rest before getting behind the wheel. • On long trips, try to travel with at least one other competent, safe, licensed driver. Stop, stretch and rotate driving every two hours. Plan to eat lightly during the drive to avoid drowsiness. • If you have a cell phone, check on the service availability in the areas through which you will be traveling. • Do not try to drive more than eight hours in any one day. • Plan where you will spend each night and make your reservations in advance. Select a good travel and departure time based on several considerations: • Plan to leave at a time where you will not find yourself in heavy or rush hour traffic when you arrive in a large city. • If you are in the desert in the summer months, avoid driving in the hottest time of day, early afternoon. Give yourself and your vehicle relief from the heat
•
Trouble keeping your head up
•
Try not to brake in the curve. Braking moves the weight of your vehicle sideways putting a strain on your tires, which could cause a blowout or rollover.
•
Tunnels and toll booths
•
Turn Signals
•
Turn on your signal well in advance of your maneuver to turn or change lanes. Signal far enough ahead so other drivers in your vicinity can make adjustments to your change in speed and direction.
•
Turn signals
often construction zones have no shoulder or extra space in which you can maneuver. Construction zones present a very high risk to all present. In 2008, over 700 persons lost their lives in construction crashes.(NHTSA - FARS). When a traffic control device or flagman is at a worksite on a highway for traffic control, you should exercise extraordinary care to secure the mutual safety of all people and vehicles at the worksite. Failure to follow all applicable traffic safety rules in a construction zone will result in a fine up to $500 (VC 46.2-878.1). Warning signs "warn" drivers of road and traffic conditions and communicate hazards that lie ahead. New pedestrian and school zone signs exist on the roadway to warn drivers of an approaching crosswalk. They are fluorescent yellow-green diamond-shaped. Guide signs provide information about routes, exits, location, distances, points of interest, and services. Regulatory signs communicate laws. The regulatory speed limit sign is the most common sign on our roadways. Traffic engineers use signals in combination with signs and markings to help control busy streets, roadways, and highways. Lines are the most common road marking and are primarily used to signify traffic lanes. Lines also communicate where to stop, when the road narrows, and where pedestrians may safely cross the road. A broad white stop bar painted across your lane at an intersection indicates the best place to stop your vehicle. Text is also used with a diamond symbol to represent reserved lanes. Arrows are used to help the driver position his or her vehicle in the proper lane for turning left, right, or going straight. If you have a SOLID yellow line on your side of the road, do not pass or cross over into the oncoming lane. Electronic highway message boards communicate safety messages. When you see a message board with an amber dot flashing in each corner, this indicates the shoulder is closed. Construction zones present a very high risk to all who are present. Each year motorists kill and injure thousands of roadway workers in construction zones. You share the road with vehicles, pedestrians, and animals and they need to be able to anticipate what you will do. Always communicate your intentions prior to maneuvers. Drivers communicate by using: •
Turn signals • Brake lights • Headlights • Emergency hazard lights • The horn • Vehicle position • Eye contact • Body movements and hand signals The use of turn signals and your brakes are the methods of communicating to other road users that are used most often. This module covers communication. The topics that will be addressed include: • Turn Signals • Lights • Brakes • Horn • Vehicle Position and Body Movement • Turn on your signal well in advance of your maneuver to turn or change lanes. Signal far enough ahead so other drivers in your vicinity can make adjustments to your change in speed and direction. Do not turn it on too much in advance
•
Turning left and U-turns. Signal your intention when turning left at an intersection or when making a U-turn. Yield to all oncoming traffic until there is a gap providing you with sufficient time and space to safely turn.
•
Unpredictable things, such as animals, pedestrians, and emergency vehicles.
•
Use all available light. If you are driving in the city, use low-beam headlights and stick to well-lit streets.
•
Using the vehicle to cut off other drivers
•
Using the vehicle to cut other drivers off or run them over
•
Vehicle Position and Body Movement
•
Vehicle position
•
Vehicles
11.
Vision obscured. This may occur due to poor visibility conditions such as rain, snow, glare, or driving into bright lights. Vision obstruction also occurs when your vision is blocked by trees, buildings, or other vehicles.
look both ways even when warning lights are not flashing - the signal may not be working. If signal and bells are flashing and ringing, do not enter the intersection. Do not try to beat the train. Never stop your vehicle straddling the railroad crossing or between the gates. When approaching a railroad crossing with more than one track, make sure you have a clear view well down the track in both directions.
Visual Search Page 5 of 11 Search Behind Our natural tendency is to concentrate on what is going on ahead of where we are going. However, trouble can come from any direction - check your mirrors whenever you change speed or position. Standard rear-view and side mirrors do not provide a complete view of everything behind your vehicle, even when properly adjusted. To adjust the driver's side mirror, place your head against the window and set the mirror so you can just see the rearmost corner of the vehicle. To adjust the passenger's side mirror, position your head at the middle of the vehicle and set the mirror so you can just see the rearmost corner of the vehicle. When changing lanes, check for traffic behind you, glance in your rearview and side mirrors to make sure no one is preparing to pass you. Also, before you change lanes glance over your shoulders to check the blind areas to be certain no one is near the left- or right-rear corners of your vehicle. If you have a stiff neck or even a bit too much weight, looking over your shoulder can be difficult for some drivers. If you experience these problems, you can install special mirrors to reduce your blind areas in the following ways: • Replace your regular mirrors with larger ones. • Install large side mirrors, both sides. • Install side mirrors with angled surfaces, which might be helpful in reducing blind areas. • Attach a small convex curved mirror in the corner of a flat mirror. This will help you see blind areas, but will not help gauge distances. By using both mirrors together, you can detect other vehicles with the curved surface and judge how close they are with the standard mirror. Always check your mirrors: • Before you slow down, stop, or when anything in the lanes ahead suggests a change of speed or position. • When you have to slow or stop quickly. • When you prepare to turn into a side road or driveway, especially if the driveway is just before an intersection. • When maneuvering to pull into a parking space. • When traveling on a long or steep incline. When you detect an obstacle in your mirrors adjust your speed or position to avoid any conflicts. Remember it is most difficult to manage space behind your vehicle. If there is someone tailgating, position your vehicle as far away as you can from the aggressive driver. Signal and maneuver to the right lane if there is a safe gap in traffic. Visual Search Page 8 of 11 Night Driving Low- and High-Beam Headlights Your external lighting system is designed to communicate with other drivers and help you to "see and be seen" by others. Increase your chances of being "seen" by other drivers by always traveling with your headlights on if your vehicle is not equipped with daytime running lights. You must use your vehicle's headlights between sunset and sunrise as well as at any other time in which your visibility is less than 500 feet (�46.2-1030). On highways, or when there is no opposing traffic, use your high beams whenever possible to illuminate your path. Be sure to turn off your high beams if there is opposing traffic or when you see taillights of vehicles ahead. Lower headlight beams must be used when approaching within 500 feet of an oncoming vehicle or when following within 200 feet of the rear of another vehicle. Failure to dim bright headlights at the approach of another vehicle or pedestrian is punishable by a fine. Use your low-beam headlights in fog, snow, or rain. The water droplets in rain and the flakes in snow will reflect the light of your high-beam headlights back into your eyes and make an already poor visibility situation even worse. Speed in Low Light Conditions Remember, the faster you travel, the longer it takes to stop. If you are traveling so fast that you cannot see past the location where you would come to a complete stop, you are "overdriving" your headlights. If you "over-drive" your headlights, and you see an obstacle in your path, you will not be able to stop before you hit that obstacle. In curves, your headlights are pointing straight ahead, not into the curve. Slow down and try to search into curves beyond the illuminated path to the best of your ability. Reducing your speed will help. Visual Search Page 10 of 11 Improving Your Vision The most important thing you can do to help you see better is to have regular eye examinations and wear corrective lenses if you need them. Normal eyes are at their peak performance when a person is in their teens. Vision begins to decline around age 15. If you have not yet experienced any noticeable changes in your vision, be aware that it will happen. Watch for warning signs such as blurry objects far away and difficulty judging distance at night. Age-related changes in vision include poor vision in dim light, difficulty seeing in glare conditions, and reduced peripheral vision. As they occur, these changes require more time to effectively search the traffic scene. To help you see better in low-light conditions: • Give your eyes a chance to adjust to darkness, especially after entering the dark from a brightly lit room. Give your eyes at least 30 seconds to adjust to the darkness while your engine is warming up. Keep in mind, it does not have to be pitch black for light levels to be inadequate. • Allow your eyes time to adjust to other low-light conditions such as twilight, fog, or haze. • Use all available light. If you are driving in the city, use low-beam headlights and stick to well-lit streets. • Make sure you get full use of your headlights. If you think your headlamps are not projecting light far enough ahead, have them checked and adjusted if necessary. • Keep headlights clean. Dirty lenses can cut the amount of light your headlights emit by as much as 90%. • Wear sunglasses during the day so your eyes are rested if you have to drive at night. • Do not smoke while you drive. In addition to creating a smoke screen, smoking reduces night vision. It also makes the windshield dirty. Be Seen It is just as important to be seen as it is to see. You share the road with many drivers who have declining vision - drivers over 50 years old will experience a rapid decline in eyesight. Be aware that a large population of drivers are age 50 and older, and may not see you clearly even though you can see them. Do not assume other drivers see you - especially if you make an illegal maneuver such as running a red light. Other drivers are being told to enter the intersection at the same time. Never assume they will see you and stop in time to avoid hitting you. Visual Search Page 11 of 11 Review What you are able to see without obstruction is called your "line-of-sight." The best condition for visual search is when your line-of-sight around all sides of your vehicle is not obstructed. Look far down the road at least 30 seconds ahead. When you decide to execute a maneuver, you will need a control zone of approximately 12 to 15 seconds. Develop the habit of observing the ground for changes in road traction conditions and for shadows that might indicate hidden hazards, such as children between parked cars. This practice will also help you judge the speed of other vehicles. When changing lanes, check for traffic behind you, glance in your rear-view and side mirrors to make sure no one is preparing to pass you. Also, before you change lanes glance over your shoulders to check the blind areas to be certain no one is near the left- or right-rear corners of your vehicle. Install larger side mirrors to reduce this blind spot. Whenever you have to back your vehicle, check behind it before getting in. Children or small objects are hard to see from the driver's seat. Back up slowly because your vehicle is much harder to control and stop while you are backing. Low light at night reduces your vision and makes driving difficult and dangerous. Using the night setting on your rear-view mirror may help, but it may hamper your ability to judge the distance of traffic behind you. At night, when there is no opposing traffic, use your high beams whenever possible to illuminate your path. Be sure to turn off your high beams if there is opposing traffic or when you see taillights of vehicles ahead. If an approaching driver refuses to switch his high beams to low, you should locate the white marker and use it to guide you. Do not overdrive your headlights - never drive so fast that you do not have time to stop to avoid hitting something just beyond your lights. If you "over-drive" your headlights, and you see an obstacle in your path, you will not be able to stop before you hit that obstacle. Speed and Physical Forces Page 1 of 8 Introduction The laws of nature are physical forces that are with you whenever you drive. These forces include gravity, friction, inertia, kinetic energy, and the force of impact. These forces' influence will vary depending on vehicle weight, speed, and direction. Operate your vehicle to compensate for these powerful natural forces. Driving at lower speeds reduces the effects the forces of nature have on your vehicle. The biggest benefit of slowing down to manage gravity, friction, inertia, and kinetic energy is the reduction in the final "killer" force - the force of impact. The force of impact is the force of an object colliding with another object. Factors that affect the force of impact include the object's weight, speed, and distance traveled after initial contact. Why is this important? If you hit something with your vehicle, the force of impact is a huge factor relative to the amount of damage incurred by the vehicle and its occupants. Here is an example of how disastrous the force of impact can be: If you weigh 100 pounds, are traveling at 30 mph, and hit a stationary object, the force of impact is 3000 pounds (mass multiplied by acceleration). The force of impact increases if the object you hit is moving toward your vehicle. This is the reason you need to avoid head-on collisions at all costs. Later in the course we will review methods of steering and braking to avoid head-on collisions and reduce the force of impact in emergency situations. This module is about speed and reducing the devastating effects of physical forces when you drive or are involved in a crash. The topics covered include: • Driving at High Speeds • Stopping Distance • Energy Absorption • Managing Speed • Speed on Curves Speed and Physical Forces Page 2 of 8 Driving at High Speeds Speed influences crashes in four basic ways: 1. It increases the distance a vehicle travels from the time a driver detects an emergency until the driver reacts. 2. It increases the distance needed to stop a vehicle once an emergency is perceived. 3. Crash severity increases by the square of the speed
•
When do you find yourself wanting a nap - sometime in the afternoon after lunch? Avoid scheduling a drive when your circadian rhythm is low. These times are when you are more likely to zone out, blank out, or experience microsleeps at the wheel.
•
When maneuvering to pull into a parking space.
3.
When the front of your car reaches the fixed checkpoint, stop counting. You are following too closely if you reach the fixed checkpoint before you finish counting three seconds.
•
When to Increase Your Following Distance
•
When traveling on a long or steep incline.
•
When traveling on two lane roadways, the right lane is for slower vehicles and the left lane is for faster traffic.
•
Who are under the age of 16 and have not held a valid driver education learner permit for 9 months and successfully completed a DMV-approved driver education course
•
Who have a physical or mental impairment which makes it unsafe to drive
•
Whose license has been revoked or suspended and not reinstated
•
Why Driving Makes People Angry
however, they are fire hazards in dry conditions and are only effective as long as they are burning (about 15-45 minutes). Reflective triangles are not as easily seen, but they are safer, easily stored, and can be used as often as needed. Collision Responsibilities If you are involved in a collision: •
You are required to stop immediately. If possible, pull over to a location that minimizes traffic obstruction. Turn on your hazard lights. • If injuries are involved, contact medical help. Call 911. • Remain at the scene. • Call the police and file a collision report. • Present your license, vehicle registration, and proof of insurance to the police. Be aware of your personal safety and protection if approached by the other driver or any passengers. Request identification and exchange information. • Obtain names and addresses of witnesses. • Notify your insurance carrier. • A written report must be sent to the Virginia Department of Motor Vehicles within 10 days of a collision that results in death, injury, or more than $1,000 damage to property. If you fail to report a collision, you may have your license suspended and be subject to a fine. • After a collision, you must provide proof of financial responsibility to the DMV, when required, proving that you had financial responsibility on the date of the incident. • If you are injured, see a doctor. • If you damage another vehicle or other property and the owner is not around, leave your name, address and telephone number on a note where you are sure the owner will see it. You must also still notify the sheriff or a member of the Virginia State Police (�46.2-372). Restraint systems and safety sensors in your vehicle may be damaged during a collision without any noticeable evidence. Even if your vehicle has minimal damage from a collision, have the safety features thoroughly checked by a qualified technician before returning to the road. Safety systems that are commonly compromised by collisions include safety belts, air bag systems, and child passenger restraint systems. Safety Belts After a very minor collision, there may be no damage to safety restraints. But if the belts were stretched, as they would be if worn during a more severe crash, have them checked and replaced. If belts are cut or damaged, replace them. Collision damage also may mean you will need to have safety belt or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt was not being used at the time of the collision. Air Bags If an air bag inflates, you will need to replace air bag system parts. Also, have the sensors checked for malfunctions after a collision. Child Safety Seats The NHTSA's current position is that child safety seats do not always have to be replaced following a minor crash. Common sense should be used in deciding whether to replace such a seat. NHTSA's criteria for a minor crash were designed to provide a wide margin of safety between cases for which reuse is recommended and those crashes that might reasonably be expected to affect future child seat performance. A crash is considered to be minor - and the child seat involved in it is safe for reuse - if it meets all of the following criteria: • A visual inspection of the child safety seat, including inspection under any easily movable seat padding, does not reveal any cracks or deformation that might have been caused by the crash. • The vehicle in which the child safety seat was installed was capable of being driven from the scene of the crash. • The vehicle door nearest the child safety seat was undamaged. • There were no injuries to any of the vehicle occupants. • The air bags (if any) did not deploy. For those situations where the caregiver determines that any of these criteria has not been met, or if they are unsure that damage to the seat has occurred, NHTSA advises caregivers to contact their automobile insurance company regarding its policy on replacement of seats. If you can see warning triangles, vehicle warning lights, or emergency vehicles ahead, slow down
•
You keep jerking the vehicle back into the lane.
•
You make frequent, quick stops.
•
You miss traffic signs.
•
You tailgate
•
Your Driving Issues
and adjusting your speed and the space around your vehicle based on visibility, road, and traffic conditions. Many drivers believe that their odds of being in a vehicular crash are very low - less than 1 in 100. This perception does not match reality. In fact, about one out of every ten drivers is involved in a crash each year. If you believe that because you are a good driver you will not have a collision, try not to let your guard down. Sharpen your driving skills to help lower your risk. This module will address the probability, consequences, and manageability of risk when you drive. Topics include: •
Your Driving Issues • Risk Awareness • Risk Assessment • Altering Risk • Managing Risk Your Risk in the Driving Environment Page 2 of 8 Your Driving Issues Each year, nearly 1 in 10 drivers is involved in a crash. Drivers ages 15 to 20 make up 14% of the driving population and are involved in about 12% of all collisions. In 2008, the majority of people killed or injured in crashes were drivers (57%), followed by passengers (22%), and motorcycle riders (16%). In 2008, persons 20-24 years old had the highest fatality rate. For all age groups, the fatality rate is higher for males. There are other facts that you may find interesting as they relate to your driving patterns. Everyday driving issues you may experience that elevate your risk include: • Traveling many miles per day in congested and low visibility traffic conditions. For example, driving to and from work during rush hour. When drivers are stuck and frustrated in heavy traffic, they lose their temper and this can lead to aggressive driving. • Exceeding the speed limit. Traffic engineers set the speed limit as the safe speed to travel on the roadway in ideal conditions. Traveling faster than the limit increases the risk and severity of a crash. When drivers are in a "rush" they often speed because they think it will get them to their destination faster. • Driving after drinking. Even one drink affects your ability to safely operate a vehicle. • Inattention and distraction. Drivers who are not paying attention to the driving environment run off the road and cause collisions. • Driving when tired, sick, or medicated. After working hard and being up for long hours, drivers get behind the wheel and often do not realize that they are impaired. The greatest number of motor vehicle crashes, property damage crashes, injury crashes, and fatalities occur between 3 p.m. and 6 p.m. during weekday rush hours. • Driving at night. Driving at night can be more dangerous than driving during the day due to reduced visibility as well as drivers being fatigued. • Driving too fast for conditions. Over five million crashes occur every year due to driving too fast in bad weather, low traction, and poor visibility conditions. Your Risk in the Driving Environment Page 3 of 8 Risk is Always Present You are among the approximately 199 million licensed drivers in the United States. Every year there are more drivers and more vehicles on our roads. Today, there are about 257 million registered vehicles and collision statistics are staggering. Consequently, driving a motor vehicle is more challenging than ever. Risk is defined as the probability of injury, damage, or loss. Risk continuously exists in the driving environment. Recognize how your driving environment changes each time you get behind the wheel - weather, road conditions, your vehicle, and other drivers are unpredictable. Develop the habit of evaluating each of those risk factors, including your own well being, every time you drive. Your Risk in the Driving Environment Page 4 of 8 Risk Assessment Lack of risk awareness is a major factor in traffic crashes. Since it is nearly impossible to determine the level of risk in specific driving situations accurately, the following are some guidelines that can help you assess risk more accurately: • Consider the probability of a dangerous event developing. • Consider the consequences of your decision. • Prepare to take action to manage the situation. Remember the three elements of the highway system - the driver, the roadway, and the vehicle. Each element has associated risks. Evaluate these elements for their risk potential before and during your drive. • Evaluate your risk as the driver. Consider things such as fatigue, impairment, allergies, and illness. • Assess the conditions of the roadway and your route. Consider the weather, light conditions, traction conditions, construction zones, and possible congestion. Go online and check the traffic and weather forecast. • Conduct a pre-drive inspection of your vehicle. Are the tires properly inflated? Is the windshield clean? Assess the risk in each category above. Conduct a mental list and if your list has multiple factors in multiple categories, your crash probability is at an elevated level. Reconsider getting behind the wheel. While driving, if you encounter a worse scenario than you anticipated, consider the consequences and make a safe decision on how to proceed. Be aware of the roadway and off-road environment. Scan well ahead, to the sides, and behind. Keep your eyes moving and search the entire traffic scene. • Predict the chances of a conflict occurring. Anticipate the actions of others. What is the probability that a dangerous event will occur? • Be prepared to manage hazardous situations. • Your Risk in the Driving Environment • Page 5 of 8 • • Altering Risk • Driving is a dangerous, complex task that demands your full time and attention. Risk is lowest when you handle one task at a time. When driving, adjust your speed and position so you can handle one danger at a time. Resist distractions like talking on the cell phone, text messaging, lighting a cigarette, loading a CD, or having a conversation with your passengers. Because the actions of other road users are unpredictable, you can also lower your risk if you adequately communicate to those around you. Always signal your intention to change lanes or turn. Use your signals, lights, or horn before you execute a pass or an evasive action. Also, you can adjust your vehicle position or speed to help prevent a dangerous event from occurring or to minimize the consequences of an unavoidable crash. Practice "what if" scenarios in your head. The most important decisions you make to lower or alter your risk of collision are associated with managing the situation. Your Risk in the Driving Environment Page 6 of 8 Risk Management Actions of all roadway users including pedestrians, animals, bicyclists, and other drivers impact your level of risk as a driver. To help manage risk, it is essential that you remain alert to conditions or objects that can increase levels of risk. Here is a checklist to help you manage risk: • Conduct a thorough visual search. Search 30 seconds ahead of your path of travel for objects or conditions that could become a threat. • Have a plan. Identify an alternate path of travel 15 seconds ahead, and the level of traction available in case of an emergency. • Never tailgate. Always travel with an adequate cushion of space ahead of your vehicle. • Position your vehicle with space to the sides and the front with an escape route, should you need it. • Obey all traffic controls. • Exercise the right-of-way rules. • Drive defensively. Try to predict the possible actions of other highway users. • Do not drive where you cannot see. If your vision is blocked, reduce your speed and reposition your vehicle so you can see well ahead, and around your vehicle
•
Your Risk in the Driving Environment
•
Your eyes and mind on the driving environment.
that's one out of ten. Drivers make about two incorrect decisions per mile, which averages 48 incorrect decisions per day, per driver. To be able to steer effectively and react quickly while driving, you need to be focused on driving with: •
Your eyes and mind on the driving environment. • Both hands on the wheel to be prepared for the unexpected. Inattention is a general lack of focus on the task of driving. Inattention is generally caused by intense mental concentration on highly emotional issues, such as relationships, health problems, family events, and money issues. It is also associated with daydreaming when your mind just wanders away from driving onto another subject. When these problems consume your thoughts, it's hard to focus on driving. If you are experiencing a highly emotional event in your life, assess your capability to remain focused behind the wheel. Clear your mind so you are able to react quickly to the unexpected events that you will encounter. Distraction Driver distraction is characterized as any activity that takes a driver's attention away from driving. Outside of the vehicle there are more distractions than inside. External distractions could include: • Other drivers • Crashes • Road signs and billboards • Unpredictable things, such as animals, pedestrians, and emergency vehicles. Distractions inside the vehicle could include: • Music • Navigation systems • Talking • Wireless devices • Drinking and eating • Your passengers Reading road maps, signs, and looking for street addresses are also visual distractions. It is important to remember that any distraction has the potential to cause or contribute to a crash. Eliminate as many distractions as you possibly can while driving. Do an inventory of the distractions you actually can control. Inside the Vehicle Inside the vehicle there are obvious potential distractions you can prevent: using a mobile phone
•
Your own garage
•
Your passengers
•
Your vehicle is tall and has substantial weight loaded high.
3.
Driving under the influence of alcohol, drugs, and other medication.
10.
Driving when drowsy, sleepy, fatigued, ill, or after experiencing a blackout.
1.
Failing to maintain lane position
1.
Failing to maintain lane position.
5.
Inattention, which includes distractions such as talking, eating, text messaging, etc.
3.
Driving under the influence of alcohol, drugs, and other medication
2.
Speeding. This is not just exceeding the speed limit; it is also categorized as driving too fast for conditions.