All Driving signs MUST KNOW!!👍🏾 🚗
Stop sign
A stop sign is a traffic sign designed to notify drivers that they must come to a complete stop and make sure that the intersection is clear of vehicles and pedestrians before they continue through the intersection.
traffic signal ahead
Advance Traffic Light Warning Road Sign. "(RED) SIGNAL AHEAD" advance warning signs warn road users of upcoming traffic lights and also indicate when the light is about to turn red—enabling users of the road to prepare to stop their vehicles.
railroad crossing
Any driver of a motor vehicle approaching a railroad crossing sign shall slow down to a reasonable speed. If required to stop, driver shall stop at the marked stop line. If there is no line, driver shall stop no less than 15 feet nor more than 50 feet from the railroad crossing.
Do not enter(one way traffic)
At the end of the street through which vehicles may not enter, a prohibitory traffic sign "Do Not Enter", "Wrong Way", or "No Entry" sign is posted, e.g. with that text, or a round red sign with a white horizontal bar. Sometimes one portion of a street is one-way, another portion two-way.
merging traffic entering from right
Merge signs appear on expressways just before expressway ramps. Drivers entering from the right must yield to traffic on the main route, and must make use of speed-change lanes to merge smoothly and safely with the main traffic flow.
no left turn
No Left Turn. This traffic sign indicates that left turns are prohibited.When you see the "NO LEFT TURN" sign at an intersection, you can either travel straight through or turn right.
No U-Turn
No U-turn. This road sign prohibits U-turns. You can make a left turn at this intersection, but making a complete turn to go in the opposite direction is not allowed. Keep Right.
Right lane ends, merge to the left
The "Lane Ends Merge" tells you that one of the lanes on a multi-lane roadway will end ahead. In this example, the traffic in the right lane must merge left. Other warning signs. Bump. No Passing Zone.
divided high way ends
The Divided Highway Ends sign is installed on a physically divided highway to warn you that the highway ahead will no longer be divided. You are, in other words, approaching an undivided roadway with two-way traffic. The road ahead has no barrier or median and you should watch for oncoming traffic on your left.
slippery when wet sign
The Slippery When Wet sign is used to warn of unexpected slippery conditions. This usually means that a part of the roadway becomes more slippery in wet or cold weather. Expect to see the sign close to bridges and overpasses, which freeze first in cold and wet weather.
two way traffic
The purpose of the TWO-WAY TRAFFIC AHEAD sign is to warn drivers travelling on a one-way street or highway that they are approaching a roadway section where two-way traffic is in operation, and that their ability to pass freely will be restricted by opposing traffic.
school crossing sign
The school crossing sign (or school zone sign) is a warning sign. School crossing signs are meant to warn drivers that they are approaching a crossing where school children cross the roadway.
Hill side
This traffic sign warns you about a hill or a downgrade up ahead on the road. Slow down and be ready to shift to lower gear to control speed and save brakes. Remember that making U-turns and passing other vehicles on hills is forbidden, these maneuvers become dangerous due to low visibility.
yield sign
Yield means let other road users go first. A yield sign assigns the right-of-way to traffic in certain intersections. If you see a yield sign ahead, be prepared to let other drivers crossing your road take the right-of-way
Keep right of divider
warns drivers that they will be approaching a traffic island or highway divider up ahead. When drivers see a Keep Right of Divider sign they know to be prepared to keep to the right side of the road.