Installing and Configuring Windows Server Practice Test

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

You have a server that runs Windows Server 2012. The server contains the disks configured as shown in the following table. You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create?

A storage pool on Disk 2 and Disk 3

Your network contains an Active Directory domain named contoso.com. The password policy for the domain is set to require a minimum password length of 10 characters. A user named User1 and a user named User2 work for the sales department. User1 is forced to create a domain password that has a minimum of 12 characters. User2 is forced to create a domain password that has a minimum of eight characters. You need to identify what forces the two users to have different password lengths. Which tool should you use?

Active Directory Administrative Center

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. All servers runs Windows Server 2012. The domain contains two domain controllers named DC1 and DC2. Both domain controllers are virtual machines on a HyperV host. You plan to create a cloned domain controller named DC3 from an image of DC1. You need to ensure that you can clone DC1. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

1. Add the computer account of DC1 to the Cloneable Domain Controllers group. 2. Create a DCCIoneConfig.xml file on DC1.

Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table. You need to ensure that you can use Server Manager on DC1 to manage DC2. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

1. Install Microsoft .NET Framework 4 on DC2. 2. Install Windows Management Framework 3.0 on DC2.

You work as a senior administrator at L2P.com. The L2P.com network consists of a single domain named L2P.com. All servers in the L2P.com domain, including domain controllers, have Windows Server 2012 R2 installed. You are running a training exercise for junior administrators. You are currently discussing the Virtual Fibre Channel SAN feature. Which of the following is TRUE with regards to the Virtual Fibre Channel SAN feature? (Choose all that apply.)

1. It allows for virtual machines to connect to Fibre Channel storage directly. 2. It includes support for virtual SANs, live migration, and multipath I/O.

You have two servers named Server1 and Server2 that run Windows Server 2012. Server1 has the DHCP Server server role installed. You need to create an IPv6 reservation for Server2. Which two values should you obtain from Server2? (Each correct answer presents part of the solution. Choose two.)

1. the DHCPv6 unique identifier 2. the DHCPv6 identity association ID

You have a server named Server1 that runs Windows Server 2012. You plan to create a storage pool that will contain a new volume. You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout. What is the minimum number of 256-GB disks required for the storage pool?

4

You are configuring the IPv6 network infrastructure for a branch office. The corporate network administrator allocates the 2001:DB8:0:C000::/58 address space for use in the branch office. You need to identify the maximum number of IPv6 subnets you can create. How many IPv6 subnets should you identify?

64

You have a server named Server1 that runs Windows Server 2012. Server1 has the HyperV server role installed. Server1 has 8 GB of RAM. Server1 hosts five virtual machines that run Windows Server 2012. The settings of a virtual machine named Server3 are configured as shown in the exhibit You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss. Which settings should you modify?

Automatic Stop Action

Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 and has the Hyper-V server role installed. You create an external virtual switch named Switch1. Switch1 has the following configurations: Connection type: External network Single-root I/O visualization (SR-IOV): Enabled Ten virtual machines connect to Switch1. You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines. What should you do?

Change the Connection type of Switch1 to Private network.

Your network contains two subnets. The subnets are configured as shown in the following table. You have a server named Server1 that runs Windows Server 2012. Server1 is connected to LAN1. You run the route print command as shown in the exhibit. You need to ensure that Server1 can communicate with the client computers on LAN2. What should you do?

Change the default gateway address.

You have a server named Server1 that runs Windows Server 2012. On Server1, you open Computer Management as shown in the exhibit. You need to ensure that you can create a 3-TB volume on Disk 1. What should you do first?

Convert the disk to a GPT disk.

You have a server named Server1 that runs Windows Server 2012. You plan to enable Hyper-V Network Visualization on Server1. You need to install the Windows Network Virtualization Filter Driver on Server1. Which Windows PowerShell cmdlet should you run?

Enable-NetAdapterBinding

Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GPO1 that contains several user settings. GPO1 is linked to an organizational unit (OU) named OU1. The help desk reports that GPO1 Applies to only some of the users in OU1. You open Group Policy Management as shown in the exhibit. (Click the Exhibit button.) You need to configure GPO1 to Apply to all of the users in OU1. What should you do?

Enforce GPO1

Your network contains an Active Directory forest. The forest contains two domains named contoso.com and corp.contoso.com. All domain controllers run Windows Server 2012 and are configured as global catalog servers. The corp.contoso.com domain contains a domain controller named DC1. You need to disable the global catalog on DC1. What should you do?

From Active Directory Sites and Services, modify the NTDS Settings of the DC1 server object.

Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GP1 that is linked to the domain. GP1 contains a software restriction policy that blocks an Application named App1. You have a workgroup computer named Computer1 that runs Windows 8. A local Group Policy on Computer1 contains an Application control policy that allows App1. You join Computer1 to the domain. You need to prevent App1 from running on Computer1. What should you do?

From Computer1, run gpupdate /force.

Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012. A server named Server1 is configured to encrypt all traffic by using IPSec. You need to ensure that Server1 can respond to ping requests from computers that do not support

From Windows Firewall with Advanced Security, exempt ICMP from IPSec.

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012. Server2 establishes an IPSec connection to Server1. You need to view which authentication method was used to establish the initial IPSec connection. What should you do?

From Windows Firewall with Advanced Security, view the main mode security association.

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 and has the HyperV server role installed. You need to log the amount of system resources used by each virtual machine. What should you do?

From Windows PowerShell, run the Enable-VMResourceMetering cmdlet.

You have a server that runs a Server Core installation of Windows Server 2012. You need to change the DNS server used by IPv6. What should you do?

From Windows PowerShell, run the Set-DnsClientServerAddress cmdlet.

Your network contains an Active Directory domain named adatum.com. You discover that when users join computers to the domain, the computer accounts are created in the Computers container. You need to ensure that when users join computers to the domain, the computer accounts are automatically created in an organizational unit (OU) named All_Computers. What should you do?

From a command prompt, run the redircmp.exe command.

Your network contains an Active Directory domain named contoso.com. The domain contains an organizational unit (OU) named 0U1. You need to ensure that when new client computers join the domain, their computer accounts are created in OU1 by default. What should you do?

From a command prompt, run the redircmp.exe command.

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012. You plan to create a shared folder. The shared folder will have a quota limit. You discover that when you run the New Share Wizard, you cannot select the SMB Share Advanced option. You need to ensure that you can use SMB Share - Advanced to create the new share. What should you do on Server1 before you run the New Share Wizard?

Install the File Server Resource Manager role service.

You have a server named Server1 that has the Print and Document Services server role installed. You need to provide users with the ability to manage print jobs on Server1 by using a web browser. What should you do?

Install the Internet Printing role service.

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012. The domain contains a user named User1 and a global security group named Group1. You reconfigure DC2 as a member server in the domain. You need to add DC2 as the first domain controller in a new domain in the forest. Which cmdlet should you run?

Install-AddsDomain

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012. The domain contains a user named User1 and a global security group named Group1. You need to add a new domain controller to the domain. You install Windows Server 2012 on a new server named DC3. Which cmdlet should you run next?

Install-AddsDomainController

You work as a senior administrator at L2P.com. The L2P.com network consists of a single domain named L2P.com. All servers on the L2P.com network have Windows Server 2012 R2 installed. You are running a training exercise for junior administrators. You are currently discussing what happens when you run the Remove-NetLbfoTeam Windows PowerShell cmdlet. Which of the following describes the results of running this cmdlet?

It removes a specified NIC team from the host.

You work as an administrator at L2P.com. The L2P.com network consists of a single domain named L2P.com. L2P.com has a Windows Server 2012 R2 domain controller, named L2P-DC01, which has the Domain Naming master and the Schema master roles installed. L2P.com also has a Windows Server 2008 R2 domain controller, named L2P-DC02, which has the PDC Emulator, RID master, and Infrastructure master roles installed. You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in L2P.com's perimeter network. You then executed the djoin.exe command. Which of the following is the purpose of the djoin.exe command?

It sets up a computer account in a domain and requests an offline domain join when a computer restarts.

Your network contains two Active Directory forests named contoso.com and adatum.com. All servers run Windows Server 2012. A one-way external trust exists between contoso.com and adatum.com. Adatum.com contains a universal group named Group1. You need to prevent Group1 from being used to provide access to the resources in contoso.com. What should you do?

Modify the Allowed to Authenticate permissions in adatum.com.

You have a server named Server1 that runs a Server Core installation of Windows Server 2012 Standard. You establish a Remote Desktop session to Server1. You need to identify which task can be performed on Server1 from within the Remote Desktop session. What should you identify?

Modify the network settings by using Sconfig.

Your network contains an Active Directory domain named contoso.com. The domain contains 100 user accounts that reside in an organizational unit (OU) named 0U1. You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to OU1. The solution must minimize the number of permissions assigned to User1. What should you do?

Modify the permissions on OU1.

You have a server named Server1 that runs a Server Core installation of Windows Server 2012. Server1 is configured to obtain an IPv4 address by using DHCP. You need to configure the IPv4 settings of the network connection on Server1 as follows: IP address: 10.1.1.1 Subnet mask: 255.255.240.0 Default gateway: 10.1.1.254 What should you run?

New-NetlPAddress

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012. An administrator creates a security template named Template1. You need to Apply Template1 to Server1. Which snap-in should you use?

Security Configuration and Analysis

You have a server named Server1 that runs Windows Server 2012. You need to enable access- based enumeration for a file share on Server1. Which tool should you use?

Server Manager

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012. The domain contains a user named User1 and a global security group named Group1. You need to modify the SAM account name of Group1. Which cmdlet should you run?

Set-AdGroup

You work as an administrator at L2P.com. The L2P.com network consists of a single domain named L2P.com. All servers in the L2P.com domain, including domain controllers, have Windows Server 2012 R2 installed. When you recently added new workstations to the L2P.com manually, you found that that the computer accounts were created in the default container. You want to make sure that the default container for newly created computers is redirected to a specified, target organizational unit (OU). Which of the following actions should you take?

You should consider making use of the redircmp.exe command-line tool.

Your network contains two Active Directory forests named contoso.com and adatum.com. Each forest contains one domain. A two-way forest trust exists between the forests. The forests use the address spaces shown in the following table. From a computer in the contoso.com domain, you can perform reverse lookups for the servers in the contoso.com domain, but you cannot perform reverse lookups for the servers in the adatum.com domain. From a computer in the adatum.com domain, you can perform reverse lookups for the servers in both domains. You need to ensure that you can perform reverse lookups for the servers in the adatum.com domain from the computers in the contoso.com domain. What should you create?

a conditional forwarder

You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 Standard. You need to configure Data1 to run a Server Core Installation of Windows Server 2012 Enterprise. You want to achieve this goal by using the minimum amount of administrative effort. What should you perform?

an online servicing by using Dism

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012. You log on to Server1. You need to retrieve a list of the active TCP connections on Server2. Which command should you run from Server1?

winrs -r:server2netstat

You have a virtual machine named VM1. You install Windows Server 2012 on VM1. You plan to use VM1 as an image that will be distributed to sales users to demonstrate the features of a custom application. The custom application only requires the Web Server (IIS) server role to be installed. You need to ensure that the VHD file for VM1 only contains the required Windows Server 2012 source files. Which tool should you use?

dism.exe

Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012. The IP configuration of each office is configured as shown in the following table. You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets. Which command should you run?

route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1

Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012. The IP configuration of each office is configured as shown in the following table. You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets. Which command should you run?

route.exe add -p 192.168.12.0 mask 255.255.252.0 172.31.255.254

You have 3 server named Server1. Server1 runs a Server Core installation of Windows Server 2012. The local area connection on Server1 has the following configuration: IP address: 10.1.1.1 Subnet mask: 255.255.240.0 Default gateway: 10.1.1.254 Preferred DNS server: <none> The network contains a DNS server that has an IPv4 address of 10.1.1.200. You need to configure Server1 to use 10.1.1.200 as the preferred DNS server. The solution must not change any other settings on Server1. Which command should you run?

sconfig.cmd

Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and Site2. The domains and the sites are configured as shown in following table. When the link between Site1 and Site2 fails, users fail to log on to Site2. You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain. What should you identify?

the placement of the PDC emulator

Your network contains an Active Directory domain named contoso.com. Your company hires 500 temporary employees for the summer. The human resources department gives you a Microsoft Excel document that contains a list of the temporary employees. You need to automate the creation of user accounts for the 500 temporary employees. Which tool or tools should you use?

The Import-CSV cmdlet and the New-ADUsercmdlet

You have a print server named Server1. You install a printer on Server1. You share the printer as Printer1. You need to configure Printer1 to be available only from 19:00 to 05:00 every day. Which settings from the properties of Printer1 should you modify?

Advanced

You have a server named Server1. Server1 runs Windows Server 2012 and is located in a perimeter network. You need to configure a custom connection security rule on Server1. The rule must encrypt network communications across the Internet to a computer at another company. Which authentication method should you configure in the connection security rule?

Advanced

You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter. Host1 contains two virtual machines named VM1 and VM2. You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN. Which two configurations should you perform? (Each correct answer presents part of the solution. Choose two.)

1. On VM1, configure a Fibre Channel adapter. 2. On Host1, configure a new Virtual Fibre Channel SAN.

You have a Hyper-V host named Server1. Server1 hosts a virtual machine named VM1. You view the properties of VM1 as shown in the following exhibit. (Click the Exhibit button.) You need to configure bandwidth management for VM1. Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)

1. Shut down VM1 2. Add a network adapter to VM1 3. Configure the properties of the synthetic network adapter

Your network contains an Active Directory domain. The domain contains a server named Server28. The computer account of Server 28 is located in an organizational unit (OU) named OU1. A Group Policy object (GPO) named Application Restriction Policy is linked to OU1. The settings of the GPO are configured as shown in the GPO Settings exhibit. (Click the Exhibit button.) Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.

?? all YES ??

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012. The domain contains a user named User1 and three global security groups named Group1, Group2 and, Group3. You need to add User1 to Group1, Group2, and Group3. Which cmdlet should you run?

Add-AdPrincipalGroupMembership

You have a server named Server1 that runs Windows Server 2012. You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly. You need to ensure that the feature can be installed on Server1. What should you do?

Connect Server1 to the Internet.

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012. You need to create 3-TB virtual hard disk (VHD) on Server1. Which tool should you use?

Computer Management

You have a Hyper-V host named Server1 that runs Windows Server 2012. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012. VM1 has several snapshots. You need to modify the snapshot file location of VM1. What should you do?

Delete the existing snapshots, and then modify the settings of VM1.

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012. You create a new inbound rule by using Windows Firewall with Advanced Security. You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received through a network address translation (NAT) device on the network. Which setting in the rule should you configure?

Edge traversal

You have a file server named File1 that runs Windows Server 2012. File1 contains a shared folder named Share1. Share1 contains an Application named SalesApp1.exe. The NTFS permissions for Share1 are shown in the following table. The members of L_Sales discover that they cannot add files to Share1. Domain users can run SalesApp1.exe successfully. You need to ensure that the members of L_Sales can add files to Share1. What should you do?

Edit the NTFS permissions.

You have a server named Server1 that runs Windows Server 2012. A network technician installs a new disk on Server1 and creates a new volume. The properties of the new volume are shown in the exhibit. (Click the Exhibit button.) You need to ensure that you can enable NTFS disk quotas for volume D. What should you do first?

Format volume D.

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed. You need to manage DHCP on Server2 by using the DHCP console on Server1. What should you do first?

From Server Manager on Server2, enable Windows Remote Management.

Your network contains an Active Directory domain named contoso.com. You install Windows Server 2012 on a new server named Server1 and you join Server1 to the domain. You need to ensure that you can view processor usage and memory usage information in Server Manager. What should you do?

From Server Manager, click Start Performance Counters.

You have a laptop named Computer1. Computer1 runs Windows 8 Enterprise. Computer1 has a wired network adapter and a wireless network adapter. Computer1 connects to a wireless network named Network1. For testing purposes, you install Windows Server 2012 on Computer1 as a second operating system. You install the drivers for the wireless network adapter. You need to ensure that you can connect to Network1 from Windows Server 2012. What should you do?

From Server Manager, install the Wireless LAN Service feature.

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012. Server1 contains a shared folder named Share1. Share1 contains the home folder of each user. All users have the necessary permissions to access only their home folder. The users report that when they access Share1, they can see the home folders of all the users. You need to ensure that the users see only their home folder when they access Share1. What should you do from Server1?

From Server Manager, modify the properties of Share1.

Your network contains an Active Directory domain named contoso.com. All of the Applocker policy settings for the member servers are configured in a Group Policy object (GPO) named GPO1. A member server named Server1 runs Windows Server 2012. On Server1, you test a new set of Applocker policy settings by using a local computer policy. You need to merge the local Applocker policy settings from Server1 into the Applocker policy settings of GPO1. What should you do?

From Server1, run the Set-ApplockerPolicy cmdlet.

Server 1 and Server2 host a load-balanced Application pool named AppPool1. You need to ensure that AppPool1 uses a group Managed Service Account as its identity. Which 3 actions should you perform?

Install a domain controller that runs Windows Server 2012, Run the New- ADServiceAccount cmdlet, Modify the settings of AppPool1.

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012. You create a security template named Template1 by using the Security Templates snap-in. . Which tool should you use?

Local Security Policy

Your network contains two Hyper-V hosts that run Windows Server 2012. The Hyper-V hosts contains several virtual machines that run Windows Server 2012. You install the Network Load Balancing feature on the virtual machines. You need to configure the virtual machines to support Network Load Balancing (NLB). Which virtual machine settings should you configure?

MAC Address

Your network contains an Active Directory domain named contoso.com. The domain contains a user account named User1 that resides in an organizational unit (OU) named OU1. A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to publish several applications to a user named User1. In the Users container, you create a new user named User2. You need to ensure that the same applications are published to User2. What should you do?

Move User2 to OU1.

Your network contains an Active Directory forest named contoso.com. The forest contains two domains named contoso.com and child.contoso.com. The forest contains two domain controllers. The domain controllers are configured as shown in the following table. You need to ensure that DC2 can provide authoritative responses for queries to the contoso.com namespace. What should you do?

On DC1, change the replication scope of the contoso.com zone.

You have two servers named Server1 and Server2 that run Windows Server 2012. Server1 and Server2 are part of a workgroup. On Server1, you add Server2 to Server Manager. When you attempt to connect to Server2 from Server Manager, you receive the following error message: "Credentials not valid." You need to ensure that you can manage Server2 from Server1 by using Server Manager on Server1. What should you do?

On Server 2, run the Configure-SmRemoting cmdlet.

Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012. Server1 has the Group Policy Management feature installed. Server2 has the Print and Document Services server role installed. On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy object (GPO) named GPO1. When you open GPO1 on Server1, you discover that the Deployed Printers node does not appear. You need to view the Deployed Printers node in GPO1. What should you do?

On Server2, install the Group Policy Management feature.

You have a server named Server1 that runs Windows Server 2012. You promote Server1 to a domain controller. You need to view the service location (SRV) records that Server1 registers in DNS. What should you do on Server1?

Open the Netlogon.dns file.

You plan to deploy a file server to a temporary location. The temporary location experiences intermittent power failures. The file server will contain a dedicated volume for shared folders. You need to create a volume for the shared folders. The solution must minimize the likelihood of file corruption if a power failure occurs. Which file system should you use?

ReFS

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 and has the HyperV server role installed. On Server1, an administrator creates a virtual machine named VM1. A user named User1 is the member of the local Administrators group on Server1. User1 attempts to modify the settings of VM1 as shown in the following exhibit. You need to ensure that User1 can modify the settings of VM1 by running the Set-Vm cmdlet. What should you instruct User1 to do?

Run Windows PowerShell with elevated privileges.

Your network contains an Active Directory domain named contoso.com. The domain contains an Application server named Server1. Server1 runs Windows Server 2012. Server1 is configured as an FTP server. Client computers use an FTP Application named App1.exe. App1.exe uses TCP port 21 as the control port and dynamically requests a data port. On Server1, you create a firewall rule to allow connections on TCP port 21. You need to configure Server1 to support the client connections from App1.exe. What should you do?

Run netshadvfirewall set global statefulftp enable.

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012. On a server named Server2, you perform a Server Core Installation of Windows Server 2012. You join Server2 to the contoso.com domain. You need to ensure that you can manage Server2 by using the Computer Management console on Server1. What should you do on Server2?

Run sconfig.exe and configure remote management.

Your network contains an Active Directory domain named contoso.com. The domain contains 100 user accounts that reside in an organizational unit (OU) named OU1. You need to ensure that a user named User1 can link and unlink Group Policy objects (GPOs) to 0U1. The solution must minimize the number of permissions assigned to User1. What should you do?

Run the Delegation of Control Wizard on OU1.

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012. You plan to create a shared folder. The shared folder will have a quota limit. You discover that when you run the New Share Wizard, you cannot select the SMB Share Advanced option. You need to ensure that you can use SMB Share - Advanced to create the new share. What should you do on Server1 before you run the New Share Wizard?

Run the Install-WindowsFeature cmdlet.

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012. The domain contains a user named User1 and a global security group named Group1. User1 logs on to a client computer named Computer1. You need to disable the computer account of Computer1. Which cmdlet should you run?

Set-AdAccountControl

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012. The domain contains a user named User1 and a global security group named Group1. You need to prevent User1 from changing his password. The solution must minimize administrative effort. Which cmdlet should you run?

Set-AdAccountControl

Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012. The domain contains a user named User1 and a global security group named Group1. You need to ensure that User1 can manage the group membership of Group1. The solution must minimize the number of permissions assigned to User1. Which cmdlet should you run?

Set-AdGroup

Your network contains an Active Directory forest named contoso.com. The forest contains a child domain named corp.contoso.com. The network has Microsoft Exchange Server 2010 deployed. You need to create a mail-enabled distribution group. Which type of group should you create?

Universal


Ensembles d'études connexes

Microsoft 365 pricing, licensing, and support

View Set

A&P 220 - Chapter 15: Autonomic Nervous System

View Set

MKT/ 574: Chapter 3: Elements of Marketing Strategy, planning, and Composition

View Set

Ch. 14 Nonopioid Analgesics:Nonsteroidal Anti-Inflammatory Drugs (NSAIDs) and Migraine Headache Medication

View Set

Q Dynamic Quiz Fundamentals and Pharmacology

View Set

Lección 7: Estructura: 7.3 y Estructura: 7.4

View Set