MEEN 361 - Hardness Prelab Quiz

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

In the lab you had tested how many carbon steel alloys? -1 alloy and 1 stainless steel -2 alloys and 1 stainless steel -3 alloys and 1 stainless steel -4 alloys and 1 stainless steel

2 alloys and 1 stainless steel

In the Hardness test experiment, you will be using -Rockwell and Vickers Hardness test machine -Vickers Hardness test machine -Brinell Hardness test machine -Rockwell Hardness test machine

Rockwell Hardness test machine

Find the false statement -Hardness test locally increases the hardness values of the material -A standard deviation more than 2.5 should result in extra data collection on the sample -Empirically, for carbon steels: TS(psi)=500*BH -Unknown materials should always be tested with HRB (hardest tip available) first

Unknown materials should always be tested with HRB (hardest tip available) first

Which of the following IS NOT standard practice in hardness testing -Using a calibration sample -Performing a number of tests to gain adequate statistics -Using a thin sample to enable indenting all the way through its thickness -Spacing indents at least 3 diameters apart from each other

Using a thin sample to enable indenting all the way through its thickness

What hardness value is not reported in the right scale? -A steel with reported HRC=47X -A tempered steel reported in HRB while its HRB=115 and its HRC=15 (47) -A quenched steel reported in HRB while its HRB=102 and its HRC=21 -An alloy with hardness reported as HRB=9.5X

A quenched steel reported in HRB while its HRB=102 and its HRC=21

Which of the following materials would you expect to have the highest hardness: -Silicone rubber -Aluminum -Copper -Alumina (Al2O3)

Alumina (Al2O3)

Which one is not one of the advantages of hardness test over other mechanical tests? -Being cheap to perform -Hardness being the most important property of the material in design problems -There is a correlation between hardness value some other mechanical properties -Non-destructive

Hardness being the most important property of the material in design problems

Which one is not one of the advantages of hardness test over other mechanical tests? -Hardness being the most important property of the material in design problems -Correlation of hardness value to other properties -Non-destructive -Being cheap to perform

Hardness being the most important property of the material in design problems

The hardness tester applies the ....... force to the sample to establish reference depth. -Minor -Minor, then major, and then minor -minor, then major -Major

Minor

Hardness testing -cannot be used to definitely determine mechanical properties beyond hardness -is relatively expensive -destroys the sample, similar to tensile testing -measures a material's resistance to local plastic deformation

measures a material's resistance to local plastic deformation


Ensembles d'études connexes

2 lecture: the evolution of quality

View Set

Severe Weather Final- chapter 18

View Set

NUR 238 PrepU Chapter 22: Nursing Management of the Postpartum Woman at Risk

View Set

CARBOHYDRATES, PROTEINS, and LIPIDS

View Set

Plate Tectonics & Plate Boundaries

View Set