Networking Essential Notes 93/94

8 bits equal:

Byte

Which two types of interference may affect the data throughput on UTP cables?

Crosstalk & EMI

What is an advantage of using standards to develop and implement protocols?

Products from different manufacturers can interoperate successfully.

If the default gateway is configured incorrectly on the host, what is the impact on communications?

The host can communicate with other hosts on the local network, but is unable to communicate with hosts on remote networks.

Which wireless RF band do IEEE 802.11b/g devices use?

2.4 GHz

A DHCP server is used to assign IP addresses dynamically to the hosts on a network. The address pool is configured with 192.168.10.0/24. There are 3 printers on this network that need to use reserved static IP addresses from the pool. How many IP addresses in the pool are left to be assigned to other hosts?

251

Which two statements describe characteristics of network addresses? (Choose two.) A valid public IPv4 or IPv6 address is needed in order for devices to communicate over the internet. DHCP is used to dynamically assign both MAC and IP addresses to devices connected to the network. A statically assigned IP address will be valid on any network to which the device connects. The MAC address of a device will change when that device moves from one Ethernet network to another. A MAC address is also refe

A valid public IPv4 or IPv6 address is needed in order for devices to communicate over the internet & A MAC address is also referred to as a physical address because it is permanently embedded on the NIC.

A network administrator issues the Switch(config)# Interface FastEthernet 0/1 command on a Cisco switch. Which term is used to describe the "0/1" part in the command?

Argument

Which statement correctly describes data transmission at the transport layer?

Both UDP and TCP use port numbers.

An intruder tries a large number of possibilities in rapid succession to guess a password. As a result, other users on the network are locked out. What type of attack has occurred?

Brute Force

In software defined network architecture, what function is removed from network devices and performed by an SDN controller?

Control plane

52. When configuring SSH on a router to implement secure network management, a network engineer has issued the login local and transport input ssh line vty commands. What three additional configuration actions have to be performed to complete the SSH configuration? (Choose three.) Configure role-based CLI access. Create a valid local username and password database. Set the user privilege levels. Configure the correct IP domain name. Generate the asymmetric RSA keys. Manually enable SSH after th

Create a valid local username and password database, Configure the correct IP domain name & generate the asymmetric RSA keys.

A user is configuring a wireless access point and wants to prevent any neighbors from discovering the network. What action does the user need to take?

Disable SSID broadcast.

A network administrator installs a network device that focuses on interconnecting independent local networks. At which layer of devices does this technology reside?

Distribution

What is a characteristic of a peer-to-peer application?

Each device using the application provides a user interface and runs a background service.

What are two common media used in networks?

Fiber & Copper

2. What two characteristics describe an FTP connection?

Files can be downloaded from or uploaded to the server & The first connection established is for traffic control and the second connection is created to transfer a file.

Using a systematic troubleshooting approach, a help desk technician suspects a problem at Layer 3 of the OSI model. In gathering information, which two questions are associated with Layer 3?

From the PC, is the default gateway reachable using the ping command? & Is the PC configured for DHCP?

Approximately 1 billion bytes equal:

Gigabyte

A student is uploading files from a phone to a server on another network. Which layer of the TCP/IP model is responsible for providing an addressing scheme to transmit the data between the devices?

Internet

What is an inherent security vulnerability of SSID broadcasting?

It broadcasts the identity of the network

Which statement describes the physical topology for a LAN?

It defines how hosts and network devices connect to the LAN.

What is the effect of setting the security mode to WEP on a small wireless router?

It encrypts data between the wireless client and the access point.

What are two benefits of using a layered network model?

It prevents technology in one layer from affecting other layers & it assists in protocol design.

Which Two devices are considered end devices? (Choose two.) router switch hub laptop printer

Laptop & Printer

Which three commands are used to set up secure access to a router through a connection to the console interface? (Choose three.) interface fastethernet 0/0 line console 0 line vty 0 4 password cisco login enable secret cisco

Line console 0, password cisco & login.

Using default settings, what is the next step in the switch boot sequence after the IOS loads from flash?

Locate and load the startup-config file from NVRAM.

When troubleshooting network problems, where would a network administrator find the configuration information, such as the computer names and the IP addresses that are used?

Logical topology diagram

Which type of device filtering can be enabled on some wireless access points or wireless routers?

MAC address

During a move, employee workstations were disconnected from the network and reconnected in new offices. However, after the move a few workstations cannot get a valid IP address. What should be checked first to identify the root cause of the problem?

Make sure the cables are functional and properly plugged.

A consumer places a smartphone close to a pay terminal at a store and the shopping charge is successfully paid. Which type of wireless technology was used?

NFC

13. At which layer of the OSI model would a logical address be added during encapsulation?

Network layer

Which solution allows external users to access only an internal FTP server on a private network?

Port forwarding

Which type of access is secured on a Cisco router or switch with the enable secret command?

Privileged EXEC

A network administrator establishes a connection to a switch via SSH. What characteristic uniquely describes the SSH connection?

Remote access to a switch where data is encrypted during the session.

While a network security product is being deployed, a customizable list of allowable protocols is shown. Which three protocols should be allowed to provide for the use of email on a network? (Choose three.)

SMTP IMAP4 Telnet DNS POP3 HTTP TFTP

A client device on an Ethernet segment needs an IP address in order to communicate on the network. A DHCP server with IP address 192.168.1.1 has been configured and enabled on the network. How will a client device obtain a usable IP address for this network?

Send a DHCPDISCOVER message to physical address FF-FF-FF-FF-FF-FF.

Which command can an administrator execute to determine what interface a router will use to reach remote networks?

Show ip route

Which type of address does a switch use to build the MAC address table?

Source MAC address

Gathers personal information without a users permission or knowledge:

Spyware

Which two files, if found, are copied into RAM as a router with the default configuration register setting boots up? (Choose two.) running configuration startup configuration POST diagnostics IOS image file

Startup configuration & IOS image file

What are two wiring schemes defined by the TIA/EIA organization for Ethernet installation in homes and businesses?

T568A & T568B

What are two features of protocols used within the TCP/IP protocol stack?

TCP mechanisms retransmit data when an acknowledgment is not received from the destination system within a set period of time & UDP is used when an application must be delivered as quickly as possible and some loss of data can be tolerated.

A customer calls the help line to report a computer problem. The help line technician responds and works with the customer for some time. However, the technician cannot identify the root cause of the problem. What should the technician do to help the customer?

Tell the customer that a ticket is created and another technician will contact the user soon.

A host needs to reach another host on a remote network, but the ARP cache has no mapping entries. To what destination address will the host send an ARP request?

The broadcast MAC address

Which two criteria are used to help select a network medium for a network?

The distance the selected medium can successfully carry a signal & the environment where the selected medium is to be installed

If the default gateway is configured incorrectly on a host, what is the impact on communications?

The host is unable to communicate with hosts on remote networks.

Which factor does not influence throughput?

The operating system that is used by end devices

A computer has to send a packet to a destination host in the same LAN. How will the packet be sent?

The packet will be sent directly to the destination host.

What is the purpose of the subnet mask in conjunction with an IP address?

To determine the subnet to which the host belongs.

Which network migration technique encapsulates IPv6 packets inside IPv4 packets to carry them over IPv4 network infrastructures?

Tunneling

A data center has recently updated a physical server to host multiple operating systems on a single CPU. The data center can now provide each customer with a separate web server without having to allocate an actual discrete server for each customer. What is the networking trend that is being implemented by the data center in this situation?

Virtualization

Which three attacks exploit human behavior?

Vishing, Phishing and pretexting

What type of technology converts analog voice signals into digital data?

VoIP

A small accounting office is setting up a wireless network to connect end devices and to provide internet access. In which two scenarios does a wireless router perform Network Address Translation (NAT)?

When a host is sending packets to a remote site owned by the manufacturer of the wireless router in order to request a digital copy of the device manual & when a host is sending packets to the ISP in order to request a speed increase for Internet services.

A user is setting up a home wireless network. Which type of device must the user have in order to establish the wireless network and provide access to the internet for multiple home devices?

Wireless router