Networking Unit 8
On a Cisco switch, what would the security association identifier be for VLAN 13?
100013
A network with 10 bits remaining for the host portion will have how many usable host addresses?
1022
Given a host IP address of 172.16.1.154 and a subnet mask of 255.255.254.0, what is the network ID for this host?
172.16.0.0
An IP address of 192.168.18.73/28 has what network ID?
192.168.18.64
By default, when using classful addressing, how many bits exist in the host portion of a Class A address?
24
What subnet mask can be used to segment the 172.16.0.0 network to allow for a minimum of 6 subnets while maximizing the number of hosts per subnet?
255.255.224.0
A network with a CIDR notation of /26 would have what subnet mask?
255.255.255.192
How many /64 subnets can be created within a /56 prefix?
256
How large is the 802.1Q tag that is added to an Ethernet frame when using VLANs?
4 bytes
What is the maximum number of host IP addresses that can exist in a Class B network?
65,534
How many subnets can a /48 site prefix support?
65,536 subnets
What IEEE standard specifies how VLAN information appears in frames and how switches interpret that information?
802.1Q
When using IPv6, what would a /64 network likely be assigned to?
A smaller organization or business.
Which of the following suggestions can help prevent VLAN hopping attacks on a network?
Disable auto trunking/move native VLANs 2 unused VLANs.
All that is needed to provide communication between two VLANs is a DHCP relay agent.
False
An unmanaged switch can still support the creation of VLANs, provided there is an interface for configuration. ... In order to identify the transmissions that belong to each VLAN, a switch will add a tag to Ethernet frames that identifies the port through which they arrive at the switch.
False
By default, the native VLAN is the same as the default VLAN.
False
Network segmentation decreases both performance and security on a network.
False
Only Class B and Class C networks can be sub netted.
False
When an 802.1Q tag is added to an Ethernet frame, where is it placed?
Inserted between the source add. and Ethernet type field.
What does the VLAN Trunk Protocol (VTP) do?
It shares VLAN database information amongst switches that participate.
With VTP, where is the VLAN database stored?
On the switch that is configured as the trunk root.
Which of the following statements regarding IPv6 subnetting is NOT accurate?
The largest IPv6 subnet capable of being created is a /64.
If the EUI-64 standard is used, what part of an IPv6 address is affected?
The last four blocks of the address.
In an IPv6 address, what do the first four blocks or 64 bits of the address represent?
The site prefix or global routing prefix.
A /24 CIDR block is equivalent to a 255.255.255.0 subnet mask.
True
A native VLAN mismatch occurs when two access ports that are connected to each other are both tagging traffic with different VLAN IDs. ... An unmanaged switch can still support the creation of VLANs, provided there is an interface for configuration.
True
IPv6 addressing does not utilize classful addressing, therefore every IPv6 address is classless.
True
In order to identify the transmissions that belong to each VLAN, a switch will add a tag to Ethernet frames that identifies the port through which they arrive at the switch.
True
Network segmentation at Layer 2 of the OSI model is accomplished using VLANs.
True
When dealing with a Cisco switch, what is NOT one of the pre-established VLANs?
VLAN 1001
What is NOT one of the ways in which networks are commonly segmented?
by device manufacturer
On certain Cisco products, what command can be used to create and send helper messages that support several types of UDP traffic, including DHCP, TFTP, DNS, and TACACS+?
ip helper-address
Subtracting an interesting octet value from 256 yields what number?
magic number
Which of the following terms is commonly used to describe a VLAN configuration in which one router connects to a switch that supports multiple VLANs?
router-on-a-stick
What command will set the native VLAN on a Juniper switch port?
set native-vlan-id
You are working on a Cisco switch and need to learn what VLANs exist on the switch. Which command will list the current VLANs recognized by the switch?
show vlan
An interface that manages traffic from multiple VLANs is known by what term?
trunk port
You have been tasked with the creation and design of a network that must support a minimum of 5000 hosts. Which network accomplishes this goal?
10.3.0.0/19
A subnet of 255.255.248.0 can be represented by what CIDR notation?
/21
