Driver's Ed Module 9
__________________ monitors the speed of each wheel to prevent lock-up?
Anti-lock Brake
U.S.DOT stands for the __________________________.
U. S. Department of Transportation
Collector/distributor lanes on high-speed, high-density highways separate slower moving traffic and entering/exiting traffic from what?
higher-speed, through traffic
What are traffic calming devices designed to do?
to slow vehicles
In addition to the GPS system, what other system in the vehicle do vehicle telematics use to provide location and vehicle functions?
on board diagnostics
An example of a traffic design that is meant to slow vehicles down is a _________________________?
roundabout.
A tire with a tread wear rating of 150 is expected to last _______________ percentage longer than one graded 100.
50
______________________ speed warning alerts driver of upcoming sharp turns.
Curve
What crash-causing condition does electronic stability control prevent?
Loss of control
_____________________ is the grip of a tire on a road.
Traction
All new vehicles are required to have ________________________ monitoring system?
Tire pressure
What is the purpose of median/edge barriers?
To provide a warning to stay awake while driving/prevent vehicles from crossing median.
Under-inflated tires can increase your chances of losing control of your vehicle.
True
Vehicle Stability Control is designed to prevent wheels from slipping sideways when cornering or steering suddenly.
True
Vehicle-to-Pedestrian (V2P) Communication includes notifying drivers about pedestrians and bicyclists.
True
Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) Communication enables vehicles to inform a driver of roadway hazards and dangerous situations that they cannot see.
True
Warning technology informs the driver of the need to act to avoid or reduce the severity of a crash.
True
_______________ increases traction and allows the driver to better manage the vehicle in bad weather?
All wheel drive
___________________ vehicles are a self-driving car that is capable of sensing its environment and moving with little or no human input.
Automated
______________________ this function automatically switches from low to high beam and back again, for improved nighttime visibility as conditions warrant?
Automatic high beams
_____________________ maintains a speed set by the driver when there is no lead vehicle.
Dynamic Radar Cruise Control
What is the technology that helps a vehicle remain on it's intended path by preventing it from sliding sideways in a turn.
Electronic Stability Control
All vehicles come equipped with the same vehicle technology systems.
False
The Rear view Video System is a replacement for mirrors and turning your head to look.
False
To prevent crashes, Vehicle-to-Vehicle (V2V) Communication can take control of the vehicle from the driver.
False
Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) Communication do not have the potential to reduce or eliminate crashes through driver advisories, driver warnings, and vehicle and/or infrastructure controls.
False
Lane departure warning uses a camera to monitor lane markings and will take control of the vehicle to keep the driver from operating it.
False, Lane departure warning uses a camera to monitor lane markings on a roadway but does not take control of the vehicle.
Tire pressure rating indicates the expected life of a tire.
False, Tread wear rating indicates the expected life of a tire.
___________________ allows vehicles and traffic signals to communicate with one another alerting drivers of an upcoming red light.
Intersection Assistance
_____________ technology automatically takes action without driver input?
Mitigating
During an over-steering or skidding situation (i.e., rear-wheel lock-up), to which wheel does the electronic stability program apply the brake?
Outer front wheels
What is the electronic stability program designed to do?
Prevent the vehicle from skidding and sliding.
This feature of Highway Safety Design helps drivers from blocking traffic. What is the feature?
Protected turn lanes
__________________ create noise and alert drivers if they cross the center or edge line?
Rumble Strips
____________________ is one of the most common contributing factors of traffic crashes?
Speeding
____________ control devices are designed to keep the tires in contact with the road surface as much as possible.
Suspension
___________ glass fractures into small relatively harmless pieces.
Tempered
Blind Spot Warning technology recognizes when another vehicle is traveling diagonally behind the driver and signals the presence of the approaching car using indicators in the vehicle.
True
Highway Safety Design may include guardrails, crash attenuators and breakaway sign posts.
True
It may be possible for a hacker to remotely access a vehicle's technology systems; but it may not always result in a hacker being able to access all parts of the vehicle systems.
True
Mitigating technology automatically acts without input to avoid or reduce the severity of a crash.
True
The Forward Collision Warning System monitors the distance between your vehicle and the vehicle in front of you to warn you of an impending crash.
True
If the car refuses to turn with your steering input (_________________________) the ESC will take control and steer towards the ____________ curve.
Understeering, inner
Technology that provides 360 degree view within range of similarly equipped vehicles is known as ___________________.
V2V
______________________ alert drivers to weather conditions and traffic problems?
Variable-message signs
Air pressure for tires should be checked when the tire is _______________.
cool
It may be possible for a hacker to remotely access a vehicles technology systems; but it may not always result in a hacker being able to access all parts of the vehicle system is known as _________________________.
vehicle cybersecurity