RC EST 52
The _______ is the physical path over which a message travels. protocol signal medium all of the choices
medium
If an Optical Carrier is represented as OC-n, generally the link speed equals (in Mbps) __________ n x 39.8 None of the choices n x 51.8 2n x 51.8
n x 51.8
Which of the following allows VLAN connection between switches?1. ISL 2. VTP 3. 802.1q 4. 802.3Z None of the choices only 1 and 3 only 2 only 2 and 4
only 1 and 3
An analog signal carries 5 bits in each signal unit. If 3000 signal units are sent per second, find the baud rate and the bit rate. 3000 baud/s and 15000 bps 300 bauds/s and 1500 bps 300 bauds/s and 15000 bps 3000 bauds/s and 1500 bps
3000 baud/s and 15000 bps
Most of the wireless systems today operate at a frequency of about: 800 MHz 100 MHz None of the choices 90 MHz
800 MHz
What is the elementary function of the transport layer? Updating and maintaining IP addresses End to end delivery Synchronization of common network protocols Point-to-point telecommunications
End to end delivery
What are the types of wireless transmission? Infrared communication Bluetooth communication All of the choices Satellite communication
All of the choices
In which media access control technique, collisions are the highest? CSMA/CD Reservation CSMA/CA Token Passing
CSMA/CD
In one switch, three distinct VLANs are configured: VLAN2, VLAN3, and VLAN4. A router is used to communicate between VLANs. What type of router interface is necessary if only one connection is to be created between the router and the switch? Ethernet 100 Mbps Serial 56 kbps Ethernet 10 Mbps None of the choices
Ethernet 100 Mbps
______ helps to identify the weak or vulnerable points of a program or a network. Trojan Ethical hacking Segmentation VPN
Ethical hacking
Which type of network security acts as a barrier between the internal and external networks among which data is shuffled? Network Access Control Network Segmentation Firewall VPN
Firewall
Which mode is characteristically used for installing networks in wireless communication devices? Fixed and wireless Mobile and wired Mobile and wireless Fixed and wired
Fixed and wired
Which of the following belongs to unguided media? Twisted pair Coaxial cable Free space Fiber-optic cable
Free space
A device that interconnects various heterogeneous networks is ____________ Switch Gateway Hub All of the choices
Gateway
What is star topology? None of the choices Many computers are connected through a single cable. Many computer networks are connected through a hub. Computers are connected to each other.
Many computer networks are connected through a hub.
What is the correct formula for transmission time? Distance/Bandwidth Message size/Bandwidth Distance/Propagation speed Message size/Distance
Message size/Bandwidth
___ is the process of restoring and recovering the working operation. Monitoring Network recovery None of the choices Network performance
Network recovery
There are seven layers to network security that target the potential areas of vulnerability in a program or network. Which model is used to represent these layers? Apple Onion Rosette Corn
Onion
Which malware can work independently by slowing down the network bandwidth? Virus Ransomware Worm Trojan
Worm
Select the characteristic which does not belong to network performance. Speed Throughput Latency Bandwidth
Speed
Network speeds should be boosted by giving hosts additional bandwidth and limiting the number of broadcast domains. Which of the following options will assist you in achieving your objective? None of the choices Bridges Controlled hubs Switches
Switches
On which principle is the fiber-optic cable based? Frequency modulation None of the choices Phase modulation Total internal reflection
Total internal reflection
Which cable is used for voice and data communication? Fiber-optic cable Coaxial cable Twisted pair Shielded cables
Twisted pair
Any resource can be located on the internet using URL; URL stands for: None of the choices Uniform Run Locator Unique Resource Locator Uniform Resource Locator
Uniform Resource Locator
The transmission in wireless technology takes place by means of using ____________ electrical signal All of the choices electromagnetic signal electronic signal
electromagnetic signal