SF 50 Vision Introduction PIM
Ailerons and flaps
Are made of of aluminum
Ruddervators
Are primary control surfaces used for both pitch and yaw
The aircraft has three doors
Cabin door, emergency exit (egress window) aft baggage compartment door
The Vision Jet overview
Carbon fiber, pressurized, low wing monoplane with a V tail
Yaw SAS
Compliments the damper but is automatic and does not interefere with the pilots controls
Yaw Damper
Is activated in above 200 ft AGL
Cabin door
Is used for normal and emergency exits
Wings
Made of Carbon fiber, that contain fuel tank on each sides
Empennage
Made of to large surfaces in V tial configuration with two ventral fins an yaw dapener
Aerodynamic devices
Made up of passive or active handling
Servo Tabs
Reduces contol stick forces and makes the airplane easier to fly.