3D print access quiz - ME 1191
What should the file extension of a CAD file be saved as to be printed?
.stl
Who is responsible for cleaning the lab?
Each person who uses it
How may access to the 3D Print Lab be denied or taken away?
Entering the lab without swiping your card
Who is responsible for cleaning up after you have used the 3D Print Lab?
Every student is required to cleanup after themselves before leaving
What are the two types of 3D printers students may use in the Print Lab?
Lulzbot-TAZ 6 & Einstart
Which slicing programs should be used with the Lulzbot-TAZ printers
Cura Lulzbot with Lulzbot-TAZ printers
What is the best temperature to run the Einstart-S printers at using PLA material?
205
What is the best temperature to run the Lulzbot-TAZ printers at using PLA material?
205 for nozzle and 60 for bed
Which slicing programs should be used with the Einstart printers
3D star with Einstart printers
If you are walking into the 3D Print Lab and the person behind you does not swipe their student ID card what action will result?
Both will lose access to the lab
This is used to increase surface area of the part you're printing, thereby ensuring proper part adhesion. This will print a single layer around the base of the part
Brim
What should the settings be when exporting 3D CAD files to .stl?
High resolution, Binary, MM
Which mode(s) should you not use for printing?
High speed Quick print
Food and drinks are allowed in the lab ____? Always
Never
What type of filament does the ME 3D Print Lab utilize in it's Einstart Printers?
PLA Filament (Verbatim)
If you damage a printer, what should you do?
Place a sign on the printer, contact the lab manager, and report it to [email protected]
What specific part(s) of the printer should be checked to see if the printer is in working order?
The extruder nozzle The build platform
What is the bed on a 3D printer?
The surface to be printed on
What is the nozzle on a 3D printer?
The tip where filament comes out
How do you lose access to the 3D Print Lab?
Willfully or carelessly damaging a printer
How is the only way you should access the 3D Print Lab?
With your student ID card
