autocad2
In the dimension 4.50±.10, what is the tolerance value?
.20
According to ASME standards, what is the minimum recommended spacing between an object feature and the first dimension line?
.375²
Annotative blocks should usually be inserted at a scale of ____.
1
Using Windows Explorer H:\Users\CourseWork\DRFT\Tests Copy CPE-13select.dwg to your U Drive Open CPE-13select.dwg Enter the SELECTSIMILAR command using the command line or dynamic input and specify the SEttings option. Disable all of the Similar Based On check boxes except Color, Layer, and Name. Select the port in the lower-left corner of the connector system and press [Enter]. How many ports are selected based on your settings?
18
In order for objects on a layout and objects in model space to print correctly, the layout must be plotted at a scale of ____.
1:!
Using Windows Explorer H:\Users\CourseWork\DRFT\Tests Copy CPE-14pedit.dwg to your U Drive Open CPE-14pedit.dwg Use the PEDIT command to achieve the polyline shown below the centerline. Mirror the result using the centerline as the mirror line. What are the coordinates of Point 1?
25.1,27.8,0.0
Paper space is a ____ drawing environment.
2D
According to the ASME Y14.5-2009 Dimensioning and Tolerancing standard, which of the following is a correct display for a specified dimension of 3.2" with a bilateral tolerance of .015?
3.200±.015
Which of the following symbols is used to begin a formula expression?
=
Which of the following formulas would multiply the sum of cells A1 and A2 by the sum of cells E5 and E6?
=(A1+A2)*(E5+E6)
Which standard sheet size is specified in the ASME Y14.1 standard in both landscape and portrait orientations?
A-size
Grips can be used to perform all of the following commands except ____.
ARRAY
Which of the following objects cannot be made annotative?
Arcs
The Spline option of the PEDIT command creates a curve that approximates a true ______________________________.
B-spline
Which command can be used to change the default insertion point for an external reference?
BASE
Blocks containing attributes are created using the ____ command.
BLOCK
Which command is used to create a region from a series of lines that form a closed area?
BOUNDARY
Which command allows you to use named plot styles in a drawing that was started with color-dependent plot styles?
CONVERTPSTYLES
If the value of the attribute should always be the same, select the ____ mode when you create the attribute.
Constant
Which of the following is not a path type option for attaching external references?
Coordinate path
Which of the following commands cannot be used to adjust the location of individual dimension lines?
DIMBREAK
Which command can be used to move dimension text to a different location?
DIMTEDIT
The three default cell styles in AutoCAD are ____.
Data, Header, and Title
Which AutoCAD tolerancing method can you use to create an unequal bilateral tolerance? Select the one item that best answers the question.
Deviation
For the MATCHPROP command to work with dimensions, what setting must be active in the Property Settings dialog box?
Dimension
You can activate a floating viewport by ______________________________ inside the viewport area.
Double Click
Which of the following is not a common reason for a drawing scale to change?
Drawing units change from decimal to fraction.
Which of the following drawing components are not commonly drawn in paper space?
Drawing views
Which command should you access to display the Enhanced Attribute Editor?
EATTEDIT
Which command must you use before you can edit one part of an associative dimension?
EXPLODE
A block created on the Objects layer and inserted on the Dimensions layer adopts the properties of the Dimensions layer.
False
A count formula adds all the values in a range of cells.
False
A tiled viewport can be considered a "hole" in a layout through which model space objects can be seen.
False
A wblock is a block that has been saved to a tool palette.
False
According to the ASME Y14.5-2009 standard, the precision of a metric dimension should be the same as the precision of its tolerance.
False
In most cases, dimensional constraints should be added before geometric constraints.
False
Objects are generally scaled to fit the drawing sheet in model space.
False
One accepted practice for editing dimensions is to explode them.
False
Parametric drafting is an efficient method for creating drawings of architectural floor plans that include a large number of objects.
False
Text that is added directly to a layout in paper space should be annotative.
False
The Quick Properties palette displays the current properties of an object but does not allow you to change them.
False
The difference between the Page Setup dialog box and the Plot dialog box is that the Page Setup dialog box offers more options.
False
The specified dimension is displayed before the tolerances in limit dimensioning.
False
To remove items from a selection set, you can press and hold the [Tab] key while you pick the objects to remove.
False
When a metric dimension is a whole number and has no tolerance, a decimal point and zeros are added to show that the value is not approximate.
False
When you erase a floating viewport in paper space, the objects displayed in the viewport are deleted from the drawing.
False
When you scale a drawing, you increase or decrease the actual size of the drawn objects.
False
Xrefs must be reloaded manually each time you open the host drawing.
False
You must select the source object to edit objects in an array.
False
Which PEDIT option allows you to create a fit curve?
Fit
Which parameter and action would you use to allow a door to be placed on either side of a wall?
Flip parameter, flip action
Blocks containing attributes are inserted into a drawing using the ____ command.
INSERT
To insert a block into a drawing, use the ____ command.
INSERT
Which of the following commands allows you to copy properties quickly from one object to another?
MATCHPROP
To display annotative objects correctly in drawings that were created in an AutoCAD version prior to AutoCAD 2008, change the default value of the ____ system variable.
MSLTSCALE
According to the video on Facebook, Andy Senesac - Video Game Cinematics Artist - KCC Graduate works on what video game?
Mortal Kombat X
Which object snap becomes active automatically when you manipulate a block with an alignment parameter?
Nearest
What is the meaning of the yellow alert icon that may appear next to a parameter in the Block Editor?
No action has been assigned to the parameter.
Which object snap allows you to snap to a definition point on a dimension?
Node
Which SPLINE option allows you to convert a spline-fitted polyline into a true spline?
Object
Which of the following commands is used to edit a polyline?
PEDIT
To remove unused blocks from a drawing, use the ____ command.
PURGE
Which of the following is not included in an inspection dimension?
Part spacing
Which of the following items allows you to view and adjust all of the properties related to the selected objects?
Properties palette
Which of the following commands allows you to create a selection set quickly using the filter criteria you specify?
QSELECT
Which command should you use immediately after changing the annotation scale to update the displayed linetype scale?
REGEN
Which path option is the best choice if the file and xrefs will eventually be shared with a client?
Relative path
Which of the following actions cannot be assigned to a linear parameter?
Rotate action
The command that is active by default when you select a grip is ____.
STRETCH
Which tab of the Modify Dimension Style dialog box sets the upper and lower values for a bilateral tolerance?
Tolerances
An advantage of using external references is smaller file sizes.
True
An average formula adds the values of all the selected cells and divides them by the number of selected cells.
True
Blocks can contain other blocks.
True
Changing the drawing scale affects the size and position of annotations.
True
Geometry that is created in paper space should be created at full scale.
True
Grips are initially displayed as unselected grips.
True
If the Constant mode is selected, no prompt appears when the block is inserted.
True
If you modify attribute field text using the Properties palette, the field is automatically converted to text.
True
In a layout that uses a color-dependent plot style table, objects may plot in a color that is different from their screen color.
True
In the grips version of the MIRROR command, old objects are deleted automatically.
True
Limits are the largest and smallest numerical values a feature can have.
True
Reference editing refers to editing an external reference within the host file.
True
The MATCHPROP command works both within a drawing and between drawings.
True
The Object option of the SPLINE command converts a spline-fitted polyline into a true spline.
True
The Polygonal button on the Layout Viewports panel of the Layout ribbon tab allows you to create a polygonal viewport.
True
The ZOOM and PAN commands do not work in a locked viewport.
True
The number of zeros displayed after the decimal point in a dimension should be specified in a dimension style.
True
The primary advantage of using layouts with floating viewports is the ability to prepare scaled drawings without changing the actual size of drawing views or sheet content.
True
To create a multiview drawing that contains more than one drawing scale, you can apply different annotation scales to each view.
True
To maintain the correct annotation scale, you should avoid zooming the contents of an unlocked viewport after the objects have been scaled.
True
To make a GD&T symbol annotative, you should use an annotative dimension style.
True
When a file is overlaid into a host drawing, any xrefs it contains are not carried into the host drawing.
True
To avoid printing the boundaries of floating viewports in a layout, what should you do to the Viewports layer before printing?
Turn it off
To use the Viewports dialog box to create a new viewport in paper space, use the ____ command.
VIEWPORTS
Which command can be used to attach an AutoCAD drawing as an external reference?
XATTACH
In the preferred method of block creation, blocks are placed on layer ______________________________.
Zero 0
Which of the following keyboard shortcuts pastes objects into a drawing?
[Ctrl]+[V]
To remove the grips from all of the objects on-screen, press the ____ key twice.
[Esc]
When you are editing a table, which key combination moves the cursor to the previous cell?
[Shift]+[Tab]
To edit model space objects from within a floating viewport in paper space, you must ____ the viewport.
activate
The letters, numbers, words, and notes used to describe information on a drawing are collectively known as ______________________________.
annotation
The two basic formats for dimensional constraints are ____.
annotational and dynamic
Blocks are created using the ____ command.
block
The portion of a floating viewport that you see is its ______________________________.
boundary
The automatic viewport that appears when you first access a layout is created on the ____ layer.
current
To remove an external reference from a host drawing, you can ____ it.
detach
Typically, the annotation scale is the same as the ______________________________.
drawing scale
By default, new dimensional constraints use the ____ format.
dynamic
The two basic types of constraints in AutoCAD are ____.
geometric constraints and dimensional constraints
A drawing has five layers: 0 (white), Objects (blue), Dimensions (red), Center (yellow), and Hidden (green). If you create objects on the 0 layer, assign the objects an absolute color of green, create a block of the objects, and then insert the block on the Objects layer, what color will the block be? Select the one item that best answers the question.
green
The small boxes that appear at strategic points on an object and allow you to perform editing operations on the object are ______________________________.
grips
The drawing into which an external reference is referenced is known as the ____.
host drawing
External references should be placed on a separate ______________________________ within the host drawing.
layer
The specified dimension is replaced by upper and lower tolerances in the ____ method of dimensioning.
limits
The default dimension name d6 refers to a(n) ____ dimensional constraint.
linear
Open CPE-28pagesetup.dwg Assuming that you print this drawing using a color printer, in what color will objects drawn on the Objects layer plot?
magenta
The environment in AutoCAD in which drawings and designs are created is ______________________________.
model space
What is the meaning of the formula =((C3*D2)/4)? Select the one item that best answers the question.
multiply the value of C3 by the value of D2 and divide the result by 4
A value that defines custom properties such as positions, distances, and angles for objects in a dynamic block is called a(n) ____.
parameter
To find the correct dimension location and spacing in model space, you must multiply the scale factor by the ____.
plotted spacing
The dimension 17.65±.15 is an example of ____ dimensioning.
plus-minus
If you try to over-constrain an object, AutoCAD creates a ____ instead.
reference dimension
What type of dimension can you place instead of a dimensional constraint if a dimensional constraint would over-constrain the drawing? Select the one item that best answers the question.
reference dimension
A closed 2D area that can have physical properties such as centroids and moments of inertia is a ____.
region
Table characteristics are set using table ______________________________.
styles
According to the ASME Y14.5-2009 standard, tolerance text height should be ____.
the same as the dimension text height
The point at which two straight polyline segments meet is called a polyline ______________________________.
vertex
Another term for an external reference is ______________________________.
xref