chapter 2 questions
non critical inch dimensions usually have....decimal places
2
Two of the isometric axes are drawn... degrees above the horizontal
30
lettering should measure....on the printed drawing
3mm
Two of the oblique pictorial axes are drawn horizontally and vertically. The other axis is most commonly drawn.... degrees about the horizontal
45
an isometric pictorial looks more realistic if it is drawn at an....percent scale
80
A relative coordinate is indicated by placing the following symbol before your coordinate.
@
The organization that controls the united states dimension standard.
ASME
This key allows you to quickly repeat your last command
Enter
Which printing option will expand/reduce your drawing to fit the paper?
Extents
List three different types of axonometric projections
Isometric, Dimetric, trimetric
List three different types of perspective projections
One point, two point, three point
The window and tab that you need to access in order to change the drawings area's color?
Options-display
The boundary selection method that will hatch everything inside the boundary.
Pick points
THE SHORTCUT MENU IS ACCESSED BY...
Right Clicking
A place that gives you quick access to commands that are frequently turned on and off.
Status bar
which coordinate system may be translated and rotated by the user to make the drawing easier?
UCS
The name of the command that allows you to apply any changes made to the current dimension style.
Update
Dimension text should be aligned...
Vertically
The typed command that allows you to creat a new viewport
Viewports
Which coordinate system is stationary and cannot be translated or rotated?
WCS
The convention of revolution is used when creating an....
aligned section
Phantom lines are used to indicate....
alternate positions
The ribbon panel that contains commands that allow you to add and remove an annotative object's supported scales.
annotation scaling
An object that will adjust its scale as the viewport scale changes.
annotative
Hatches will change size based on the viewport scale. This makes them...
annotative
A dimension that is linked to and will change with geometry is
associative
Hatch will change shape if the geometry they are connected to changed this makes them....
associative
center line are used to indicate....
axes of symmetry
a grouping of objects that may be reused...
block
List three different types of oblique projections
cavalier, Cabinet, General
..... line patterns are drawn thinner than visible lines
center
X is the symbol used for repeated features. What else is this symbol used for?
chamfer
A polygon that is drawn on the outside of a circle is said to be...
circumscribed
to indicate line importance we draw lines using different line..
colors
What type of selection window selects everything touching and inside he defined window?
crossing window
How do you toggle between iso planes?
ctrl+E
The layer you are drawing on is said to be....
current
A cutting plane line indicates where the part is being being...
cut
section lines are used to indicate...
cut material
A .... line is drawn thicker than the visible lines
cutting plane
The sectioned and non sectioned halves of a half section are separated by a ___ line
cutting plane
a surface of the part that touches the datum plane is called a ...
datum feature
The typed command used to edit dimension tect
ddedit
the typed command used to edit existing text.
ddedit
The name of the window used to create and modify dimension styles
dimension style manager
The typed command used to force dimension text between the extension lines.
dimtix
Which printing option prints everything that you can currently see?
display
Hidden lines are used to indicate....
edged and boundaries you cannot see
a circular feature in a n isometric pictorial is represented by an.....
ellipse
circular features in a pictorial are drawn as
ellipses
The command used to break a block up into its individual components.
explode
The standard views of an orthographic projection are....
front, top, right side
A full section removes one ____ of the object
half
The typed command used to creat section lines.
hatch
All dimension text should be.....
horizontal
The purpose of a section view is to see what is on the _______ of a part.
inside
within the ellipse command, what option allows you to create a circular feature in an isometric pictorial?
isocircle
Clicking, holding and dragging the mouse produces a ....
lasso window
A relative coordinate is measured relative to the...
last point entered
the place/window where you can change a layers color, livetype and status.
layer properties manager
The command that is used to set your paper size.
limits
which printing option prints everything within your defined paper size?
limits
what layer property controls an entity's printed width?
line type
The typed command that is used to control the length of the dashed and spaces of the
ltscale
an area within layout space that allows you to view objects within ,model space and to scale these objects with respect to the printed page.
model view
A dimension type that does not have associativity
muiltileader
The cutting plane line arrowheads are created using a ....
multileader dimension
is it permissible to show hidden lines on some portion of a half section?
no
An absolute coordinate is measured relative to the...
origin
A reference dimension is given within....
parentheses
Cutting plane linetype
phantom
What typed command is used to change the polar tracking angle increment?
polarang
To change the line type scale of an individual object, you must enter the.... window
properties
A radius or diameter dimension leader should always point to the... of the arc or circle
quadrant
An arc may be defined by its start, end.....
radios,angle
A circle may be defined by its center and ...
radius, diameter
Datum dimensioning is preferred over continuous dimensions because it....
reduces error build up
Which type of section view is usually shown at an enlarged scale?
removed
a ________ section is always labeled
removed
The boundary selection method used to create a hatch that stops when it encounters a boundary.
select boundary objects
What type command and options are used to access isometric snap?
snap-style-isometric
clicking and dragging the mouse from the right to left produces a ...
standard window
The system variable that determines whether the select template window or the create new drawing window appears when stating a new drawing.
startup
What is the typed command used to access text settings?
textsettings
A pictorial may be included on a detailed drawing
true
the convention of revolution is used when creating an aligned section so that the angled features may be shown....
true size
The command that is used to select your unit of measure precision
units
are arrows at the end of a cutting plane line pointing to the part of the object that is being removed or viewed?
viewed
Dimension and extension lines are thin so that they will not be mistaken for...
visible
Why is developing the ability to sketch pictorials by hand so important?
visualizing
what typed command is used to write a block file?
wblock
