INTRO TO PLC
The 1769-L16ER controller is USB___ compatible and operates at 12 Mbps.
2.0
A PLC and PC are connected in a(n) __ network using a single Ethernet Cable.
Point-to-Point
PLC's provide a means of controlling machines and other industrial applications with a(n) ___ instead of using hardwired devices, such as relay coils and contacts.
HMI Panel¿ industrially-hardened computers
The six basic componets pof most PLC's are the power supply, the input and output modules, the proccessor module, the programming device, and the ___.
I/O chassis
A PLC requires much less ___ than a hardwired relay panel that could do the same job.
space
All PLC's must have a(n) ___ to operate.
user developed project
The three network levels are enterprise, automation and, ___, and field device.
control
___ is an embedded operating system that controls how microprocessor-controlled hardware devices operate.
firmware
Ethernet/IP uses the ____(protocol) to produce a network suitable fore use on automation and control level.
CIP
___ are software porograms that allow a device to connect to a network and communicate with other devices
Drivers
___ use several protocols to convert data from its native format, such as a text message, into a format that can be sent and tracked from the source node to the destination node of a network.
Ethernet TCP/IP
A(n) ___ network is a high speed communications connection used to exchange data between production line equipment and other devices within a manufacturing facility.
Industrial network
Two Addresses are used for Ethernet communications, Media Access Control (MAC) and ___.
Internet Protocol (IP)
A(n) ___ is used to download hardware configurations and programs into a PLC.
PC
The basic Operation of a(n) ___ is to scan instructions, monitor the status of input devices, and produce outputs based on which inputs are on or off.,
PLC
___displays networks and devices in a similar manner to windows explorer.
RSLinx
____ displays networks and devices in a similar manner to windows explorer.
Studio 5000
Problems with identifying a controller's firmware revision by ___ is that the revision indicated is often outdated.
User catalog
A(n) ___ is a file that contains a hardware configuration and control program.
project