Air wis
air wis began wht yr
1965
engine
2 general electric cf34-3b1 high bypass turbofan engines
what is your true airspeed at FL300 with an indicated of 300?
2 percent per 1000, (0.2x (30000/1000)=.6 300x1.6 =480 TERM ENGLISH IMAGE
max crosswind
27kts 15 snow
when does runway center light alternate white to red?
3000 feet remains
Normal operating for hydraulic
3000psi
ho many ejector pumps on crj?
4 2 scavenge main ejector pumps
Landings flaps
45
max landing weight
47000
how many TRUs does the CRJ have
5
max to weight
53000
How does the hydraulic system work
6 hydraulic pumps provide pressure to 3 independent hydraulic systems . each system is pressurized by 2 pumps. Systems 1 and 2 are pressurized by their respective engine driven pumps and electrical backup pump. System 3 is pressurized by 2 hydralulic pumps
1 mach=
666 kts
Takeoff flaps
8 or 20
engines produce
8729 lb of thrust
star next to tower freq
: does not operate 24 hrs
Who is responsible for airworthiness
=comapany, pilot double check
lost coms:
AVEFAME assigned route, vectored, expected, files, asssigned, min, exepected alt . hold until ETA, sqwack 7600
When should flaps 8 be added
After approach and in range checklists, at 180 kts
What is coffin corner
Coffin corner is the region of flight where a fast but subsonic fixed-wing aircraft's stall speed is near the critical Mach number, at a given gross weight and G-force loading. In this region of flight, it is very difficult to keep an airplane in stable flight.
when can u descend in a PT ?
abeam the fix inbound
ceo
air wis robert binns
glideslope descent rate rule of thumb:
airspeed x5
What is Mach tuck
anywhere from 0.75 Mach to 1.2 Mach. When the first molecule reaches speed of sound, shockwaves form. Aerodynamic center moves aft, As air flows from the supersonic region in front of the shockwave, to the subsonic region behind the shockwave, it separates and becomes turbulent.
three factors that affect VMC:
density altitude, Gear, "keel" affect. CG
Flaps are
electrically operated
what is an emas?
enigineered materials arrestor system
What is an FFDO
federal flight deck officer
GR
hail "Grainy rain"
Elevators, ailerons, spoilerons, rudder are ___ with two systems for redundancy
hydraulic
turbulence speed
lesser of 280 kias or .75 mac
what does vor a mean?
runway is more than 30 degrees off center
What to report when holding:
time, entering, eastablished and alttude
what side around an anvil>?
upwind, away from anvil side
Dutch roll:
yawing towards raised wing due to more lift and drag
When should flaps 20 be added
170 kts, prior to intercepting final approach course
At what altitude does class b speed restriction end?
10,000
what bleed air is used for pressurization?
10th
which for reversers?
14th
When does gear and flaps 30come down ?
160, 5nm prior, set speed bug
min to temp
-40
Holding airspeeds:
0-6; 200. 6-14; 230. 14; 265
How many gens doe scrj have
1 APU gen, 2 engine driven, 1 ADG
What is a hung start
A hung start occurs when the engine lights off normally but doesn't accelerate to idle RPM. This is usually the result of insufficient power to the engine from the starter.
What is a hot start
If the engine experiences unusual difficulty accelerating during start, a hot start may occur. There won't be enough airflow to cool the initial combustion of fuel within the engine. Acceptable temperature and time limits are published within individual aircraft flight manuals to prevent engine damage.
How to recover from Mach tuck
Recovery can be attempted by lowering the gear, extending the dive brakes, and lowering the flaps. Drag needs to be increased. Recovery is sometimes impossible
What is mcrit
When Mach number equals 1 (speed of sound).. aircraft will begin Mach buffet
What is Y and Z on an appraoch ??
Y= uses an RNAV TAA requires gps. Z uses conventiional ground navaids requires DME or radar
For 121 can you take off below landing mins?
Yes, with alternate within one hour distance with one engine inop
What is needed to descend below DA
stabalized, normal maneveurs, runway environment in sight