Print reading midterm

2x4 size

1-1/2x3-1/2

Brick Veneer

Brick Veneer may be used to finish frame or masonry walls, brick veneer is a brick facing applied to the exterior wall surface of a frame structure or other type of structure

Cutting Plane Line

Cutting plane linesindicate a plane or planes exposed by cuttingand removing an imaginary section of the object. The exposed plane is called the sectional view and the line used to cut the object is referred to as the cutting plane line

working drawings

Drawings that convey all of the information needed to manufacture and assemble a design. the most essential working drawings required include plot plans elevations sections and details

Nominal size

Is the dimensions of a piece of lumber before it is dried and surfaced

Brick

a brick is an individual rectangular unit made from clay or clay make sure that is hardened by drying in a kiln

details

a detail is a scale plan view elevation for Section produced at a large-scale to show special features

floor plan

a floor plan is a plain view of a building that shows the arrangements of walls and partitions as they appear in an imaginary horizontal section taken approximately 5'-0" above floor level. Floor plans are views of a building as though cutting planes were made through it horizontally

plot plans

a plot plan is a scale working drawing that shows the shape and size of a building Lot location shape and overall size of building on the lot and the finished floor elevation of the building

R value

a value that represents the ability of material to resist heat flow

abbreviations

above finished floor. AFF Center to Center. C to C circuit. CKT concrete. CONC not to scale. NTS panel. PNL point of beginning. POB rough opening. RO or RGH OPNG switch. SW or S

architect's scale

an architect's scale is used to draw and measure objects at a particular size

engineer scale

an engineer's scale is a triangular six-sided scale used to draw and measure large areas such as building Lots on plot plans

elevations

and elevation is a scale view looking directly at a vertical surface

Dimension lines are terminated by ___________.

arrowheads, slashes or dots

concrete

country is a mixture of cement, fine and coarse aggregate, and water

Concrete masonry units (CMU)

is a Precast Hollow or solid masonry unit composed of Portland cement and find aggregate and formed into modular or non modular two dimensions

installation

is any material used as a barrier to inhibit thermal or sound Transmissions installation is available as loose failed flexible rigid and foam in place

fire brick

is manufacturer or refactory ceramic material that resists high temperatures without disintegrating

Door hand

is the direction in which a door swings always stand on the outside of the door to determine

alphabet of lines

line types use on drawings include object lines hidden lines centerline's dimension lines extension lines leaders brake lines cutting planes and section lines

wood frame walls

the symbol for wood frame walls are interior partitions on plainview's is two parallel lines representing the two faces of the wall or partition with a space in between two lines