Network+ 8th Edition FINAL
15. You are troubleshooting a DNS issue on a Linux system, and need to test the resolution of your domain mycompany.com MX record using Google's DNS server with the IP address of 8.8.8.8. What dig command will accomplish this?
d. dig @8.8.8.8 mycompany.com MX
22. What component of enterprise level structured cabling serves as the location where an incoming network interface enters a building and connects with the building's backbone cabling?
d. entrance facility
5. The Data Link Layer utilizes what name for its protocol data unit (PDU)?
d. frame
24. You've been handed a fiber with a 1.25-mm ferrule that requires a connector. What is the most commonly used connector for this ferrule size?
d. local connector (LC)
25. With a FQDN of ftp1.dallas.mycompany.com, what part is the domain name?
d. mycompany.com
6. When using DHCP for IPv6 (i.e. DHCPv6), what port do clients receive responses on?
d. port 547
15. Which of the following is a document that is sent as a request to vendors to submit a proposal for a product or service that your company wants to purchase?
d. request for proposal
12. Signals that can travel in only one direction on a medium are referred to as what type of signal?
d. simplex
23. How can you determine the manufacturer of a NIC card based on the MAC address?
a. The first 24 bits, known as the Organizationally Unique Identifier, identify the manufacturer.
14. How do routers create a broadcast domain boundary?
a. They forward broadcasts only to necessary segments.
11. A policy in which all exit doors for a building stay unlocked during a fire is an example of what type of policy?
a. fail-open
21. Where is a demarc located in relation to the structured cabling of an enterprise environment?
a. in the Main Distribution Frame (MDF)
1. A change coordinator functions as what type of manager?
a. project manager
17. Bidirectional transceivers utilize what technology to separate the data in each direction?
a. wavelength division multiplexing
21. What is the minimal amount of voltage required to damage an electrical component?
b. 10 volts
22. In the classful addressing scheme, what range of network addresses is considered a Class B?
b. 128.0.x.y to 191.255.x.y
11. Which of the following IPv6 addresses represents a global unicast address?
b. 2000::/3
13. In a DNS zone, what type of record holds the name-to-address mapping for IPv6 addresses?
b. AAAA record
12. Your supervisor has asked you to configure a new prototype network with a dual stack configuration. What does this mean?
b. Both IPv4 and IPv6 protocols will be used on the network.
11. Which of the following is NOT a best practice when performing cable management?
c. Cable ties should be pulled tightly to keep cables from moving around in a bundle.
25. What is the minimum category of UTP cable required in order to support Gigabit speeds?
c. Cat 5e
8. What is a defining characteristic of a bus topology based network?
c. Devices are daisy-chained together in a single line.
16. What does the MX record do in a forward DNS zone?
c. It identifies the e-mail server to be used for e-mail traffic for the domain.
20. In the TCP/IP model, what layer is considered so simple that it is ignored entirely?
c. Physical
16. Which of the following statements correctly describes the SFP+ transceiver?
c. SFP+ is the same size as SFP, and supports a theoretical maximum transmission speed of 16 Gbps.
4. What mail protocol is used to send mail messages to a server?
c. SMTP
2. What Application layer protocol can be used to monitor and gather information about network traffic and can alert network administrators about adverse conditions that need attention?
c. SNMP
19. What layer of the OSI model describes how data between applications is synced and recovered if messages don't arrive intact at the receiving application?
c. Session Layer
4. You are setting up a DNS zone and have been asked to create SPF and DKIM records. What type of DNS record will hold this information?
c. TXT record
9. In the United States, who is able to activate the Emergency Alert System at the national level?
c. The President
9. You are troubleshooting a network issue on a client computer and discover that the network card has an IP address of 169.254.196.200. What does this mean?
c. The computer is configured to use DHCP, but was unable to lease an address.
7. What statement accurately reflects what occurs when a message is too large to transport on a network?
c. The message is divided into smaller messages called segments (for TCP) or datagrams (for UDP).
25. The TCP and UDP protocols both exist at what layer of the OSI model?
c. Transport
23. In a voice over IP setup (VoIP), what kind of device converts signals from a campus's analog phone equipment into IP data that can travel over a phone company's analog telephone lines?
c. VoIP gateway
15. What multiplexing technology lowers cost by spacing frequency bands wider apart to allow for cheaper transceiver equipment?
c. coarse wavelength division multiplexing
19. Noise that can degrade or distort a signal on a network is measured with what unit?
c. decibels
5. A typical fiber termination kit should include what tool for cutting a clean slice through fiber strands?
c. fiber cleaver
2. What command can you utilize to display TCP/IP configuration information for each network adapter installed?
c. ipconfig /all
1. A Windows computer on your network is having issues resolving queries for a specific domain, but not other domains. Other computers on the same network resolve the name just fine. What command can you issue that might fix the problem?
c. ipconfig /flushdns
17. What utility is used to verify that TCP/IP installed, bound to the NIC, configured correctly, and communicating with the network?
c. ping
25. What kind of document serves as a legally binding contract or part of a contract that defines, in plain language and in measurable terms, the aspects of a service provided to a customer?
c. service-level agreement
8. What component of the backbone runs between a building's floors and can be used to connect an MDF and IDF or multiple IDFs?
c. vertical cross connect
3. What text editor can be used on Linux to view and edit the contents of a configuration file?
c. vim
9. When viewing the pinout for T568B, what is the correct order of wire colors, starting at pin 1?
c. white/orange, orange, white/green, blue, white/blue, green, white/brown, brown
20. When planning horizontal cabling, what is the maximum allowable distance that can be used?
d. 100 meters
8. Which of the following is NOT a range of IP addresses recommended for use in private networks?
d. 127.0.0.0 through 127.255.255.255
24. Which of the following IP addresses would be a loopback IP address?
d. 127.0.0.1
10. Both 10GBase-ER and 10GBase-EW have what maximum distance limitation on a segment of single mode fiber?
d. 40km
9. When creating network diagrams, what icon description typically represents a network switch?
d. An icon that is rectangular, which contains four arrows pointing in opposite directions.
23. HTTP, IMAP4, FTP, and Telnet are all examples of protocols that operate at what layer of the OSI model?
d. Layer 7
18. The proper handling procedures for substances such as chemical solvents is typically outlined in which of the following options?
d. Material Safety Data Sheet (MSDS)
16. At what layer of the OSI model do the IP, ICMP, and ARP protocols operate?
d. Network
1. The Windows Remote Desktop application utilizes what protocol to provide secure, encrypted transmissions?
d. Remote Desktop Protocol (RDP)
5. Which of the following protocols is used as a signaling protocol for the initial connection between hosts, but does not participate in data transfer during the session?
d. SIP
18. What statement regarding main distribution frame or main distribution facilities is accurate?
d. The MDF is the centralized point of interconnection for an organization's LAN or WAN.
7. A junior administrator is having issues connecting to a router's console port using a TIA/EIA 568B standard cable and a USB serial to RJ-45 adapter, despite verifying terminal settings. What is the issue?
d. The cable must be a rollover cable.
3. In a coaxial cabling, what does the RG rating measure?
d. The materials used for shielding and conducting cores.
12. What occurs if a network layer protocol is aware that a packet is larger than the maximum size for its network?
d. The packet will be divided into smaller packets using fragmentation.
15. Which of the following is not one of the disadvantages of peer-to-peer networks?
d. They centralize user account logins.
20. A Fast Ethernet connection utilizes what pins on an RJ-45 plug?
c. 1, 2, 3, 6
8. What is the maximum supported throughput of a CAT6 cable?
c. 10 Gbps
17. Which of the following is an example of encapsulation?
a. The addition of a header to data inherited from the layer above in the OSI model.
14. Equipment data racks most commonly are a standard width of what measurement?
a. 19 inches
18. What is the industry standard angle for an Angle Polished Connector (APC)?
a. 8 degrees
4. PoE+ devices are defined by what IEEE standard?
a. 802.3at
4. What statement accurately describes what a cable bend radius determines?
a. A cable bend radius is the radius of the maximum arc into which you can loop the cable without impairing data.
13. What statement describes a transmission flaw that is occurring due to attenuation?
a. A customer modem is continuously losing signal due to large distance from the transmitting device.
22. Why should you terminate coaxial cable with connectors that are rated for the exact cable type?
a. A mismatched connector will have different impedance ratings, causing data errors.
7. What statement correctly identifies the purpose of a software patch?
a. A software patch is a correction, improvement, or enhancement to software.
10. When creating network diagrams, what icon description typically represents a network router?
a. An icon that has a hockey-puck shape with two arrows pointing inward and two arrows pointing outward.
10. In the TCP/IP model, what layer combines the responsibilities of the Application, Presentation, and Session layers from the OSI model?
a. Application
7. If a host's IPv6 address contains the network adapter's MAC address within the last 64 bits of the IPv6 address, what standard is being used?
a. EUI-64
3. What does a statement of work document do?
a. It documents in detail the work that must be completed for a particular object, and includes specifics such as tasks, deliverables, standards, payment schedule, and work timeline.
22. At what layer of the OSI model does a network switch normally operate?
a. Layer 2
6. The frame header at the Data Link layer includes hardware addresses of the source and destination NICs. What is another name for this address?
a. MAC (Media Access Control) address
11. Which statement accurately describes what near end crosstalk (NEXT) is?
a. NEXT is crosstalk that occurs between wire pairs near the source of a signal.
13. During termination of twisted pair cabling, what should be done to ensure minimal cross talk is introduced?
a. No more than 1 inch of the cable should be exposed.
13. What federal agency is charged with safety and health in the workplace?
a. Occupational Safety and Health Administration (OSHA)
24. What is NOT a TIA/EIA recognized cabling type that can be used for horizontal cabling?
a. RG-6 Coaxial
14. You have been awarded a contract for wiring a new federal building. What twisted-pair wiring standard must you use?
a. TIA/EIA 568A
14. What is assigned to each node on a network, which is then used by the Network layer to uniquely identify the node?
b. IP address
21. What statement regarding the Server Message Block protocol is accurate?
b. It is used by Windows and UNIX-based operating systems to share files.
2. Which of the following statements about fiber-optic cabling is accurate?
b. Light experiences virtually no resistance when traveling through glass.
19. In general, how much can a twisted-pair's cable be bent before data transmission may be impeded?
b. No more than four times the diameter of the cable.
20. In the DNS hierarchy, where is information about how to find the top-level domain servers held?
b. On the DNS root servers.
21. What statement regarding the Power Over Ethernet standards is inaccurate?
b. Power over Ethernet requires CAT6 or better copper cable.
23. Broadband cable Internet service and cable TV are most commonly delivered over long distances via what type of cable?
b. RG-6
3. In considering the responsibilities of each layer of the OSI model, what statement accurately reflects those of the Presentation layer?
b. The Presentation layer is responsible for reformatting, compressing, and/or encrypting data in a way that the application on the receiving end can read.
6. Why should you not leave more than 1 inch of exposed cable before a twisted-pair termination?
b. The exposure of the cable can cause transmission interference between wires.
18. What part of a MAC address serves as the extension identifier, or device ID?
b. The last 24 bits of the MAC address.
17. A dedicated telephone switch or virtual switching device that connects and manages calls within a private organization, and manages call connections that exit the network through a VoIP gateway, is known by what term?
b. VoIP PBX (private branch exchange)
12. What is the name of the GUI front end that is available for the Nmap utility?
b. Zenmap
16. In order to ensure that a cable is not affected by electromagnetic interference, how far away should the cable be from fluorescent lighting?
b. at least 3 feet
24. In a fire suppression system, what term is used to describe what is typically a foaming chemical, gas, or water that is sprayed everywhere to put out a fire?
b. fire suppression agent
10. What type of IPv6 address is fe80::8cf1:2c42:ffde:da1c?
b. link local address
2. Your company is setting itself up to distribute software made by another company. What type of document should your company procure from the developing company?
b. master license agreement
1. What kind of tool can you use to measure voltage on a cable length?
b. multimeter
6. Utilizing time slots that are adjusted according to priority and need is an example of what type of multiplexing on copper lines?
b. statistical time division multiplexing
19. What command can be used to check a domain computer's time source from a Command Prompt window?
b. w32tm /query /source
5. What type of diagram is a graphical representation of a network's wired infrastructure?
b. wiring schematic
