RHS Exam Study Guide

Réussis tes devoirs et examens dès maintenant avec Quizwiz!

Which size receptor is traditionally used with the bisecting technique?

#2 receptor for anterior teeth and for posterior teeth With the bisecting technique, #2 receptor is traditionally used for anterior teeth and for posterior teeth; #1 receptor is recommended for anterior teeth with the paralleling technique. With the bisecting technique, #2 receptor is traditionally used for anterior teeth and for posterior teeth; #1 receptor not used for posterior teeth, it is recommended for anterior teeth with the paralleling technique. With the bisecting technique, #2 receptor is traditionally used for anterior teeth and for posterior teeth.

What vertical angulation should you use when adjusting the PID to take bite-wing images with bite-tabs?

+10

You are using the Rinn Snap-A-Ray to take a dental image of tooth #13. What vertical angulation should you set the PID at to get a dental image that is the same length as the tooth?

+30 to +40 degrees With the bisecting technique, the recommended vertical angulation range for mandibular premolars is -10 to -15 degrees. With the bisecting technique, the recommended vertical angulation range for maxillary molars is +20 to +30 degrees. With the bisecting technique, the recommended vertical angulation range for maxillary premolars is +30 to +40 degrees. Setting the vertical angulation is required with the Snap-A-Ray because there is no alignment rod or ring.

You are using the Rinn Snap-A-Ray to take a dental image of tooth number 13. What vertical angulation should you set the PID at to get the proper image?

+30 to +40 degrees With the bisecting technique, the recommended vertical angulation range for mandibular premolars is -10 to -15 degrees. With the bisecting technique, the recommended vertical angulation range for maxillary molars is +20 to +30 degrees. With the bisecting technique, the recommended vertical angulation range for maxillary premolars is +30 to +40 degrees. Setting the vertical angulation is required with the Snap-A-Ray because there is no alignment rod or ring.

With the bisecting technique, the recommended vertical angulation range for tooth number 6 is _________ degrees.

+45 to +55

For the maxillary topographic occlusal projection, the central ray is directed at ____ degrees.

+65

You are using the Rinn Stabe Bite-bloc to take a dental image of teeth numbers 23-26. What vertical angulation should you set the PID at to get the proper image?

-15 to -25 degrees With the bisecting technique, the recommended vertical angulation range for mandibular canines is -20 to -30 degrees. With the bisecting technique, the recommended vertical angulation range for mandibular incisors is -15 to -25 degrees. With the bisecting technique, the recommended vertical angulation range for maxillary incisors is +40 to+50 degrees. Setting the vertical angulation is required with the Stabe Biteblock because there is no alignment rod or ring.

With the bisecting technique, the recommended vertical angulation range for tooth number 30 is _________ degrees.

-5 to 0 With the bisecting technique, the recommended vertical angulation range for mandibular molars is -5 to 0 degrees.

According to the current recommendations (2003) of the National Council on Radiation Protection and Measurements, the current MPD for an occupationally exposed pregnant women is the equivalent of

0.5 mSv/year. It is recommended that dental radiographers not exceed a maximum dose of 50 mSv in any 1 year. For pregnant dental personnel, the radiation exposure limit is 0.5 mSv per month during the pregnancy months. For nonoccupationally exposed persons (i.e., the general public), the current MPD is approximately 1 mSv/year (0.1 rem/year).

Which types of cells are more sensitive to radiation: (1) rapidly dividing, (2) slowly dividing, (3) young, and/or (4) old?

1 and 3

In dental imaging, no __________________ are used.1. critical instruments2. semicritical instruments3. noncritical instruments

1 only

Advantages of panoramic receptors over intraoral periapical receptors include visualization of1. impacted third molar teeth.2. jaw fractures.3. large lesions in the posterior mandible.

1, 2, 3

A dental image depicts which of the following dimensions of an object?1. Length2. Width3. Depth

1,2

A ______________ may be a dental radiographer.1. dental hygienist2. dental assistant3. dentist

1,2,3

After seating the patient, the radiographer must complete which of the following procedures before washing the hands and putting on gloves?1. Chair adjustment2. Headrest adjustment3. Placement of the lead apron

1,2,3

Cellular injuries following the latent period may include (1) cell death, (2) cessation of mitotic activity, and/or (3) abnormal mitotic activity.

1,2,3

Infection control is critical in your dental operatory because pathogens can be transmitted easily through which of the following1. your patient to you.2. you to your patient.3. from one patient to another patient.

1,2,3

The Consumer-Patient Radiation Health and Safety Act1. outlines requirements for the safe use of dental x-ray equipment.2. establishes guidelines for the proper maintenance of x-ray equipment.3. requires persons who take dental images to be properly trained and certified.

1,2,3

Through the use of dental images, the dental radiographer can detect ________ that cannot be detected clinically.1. diseases2. lesions3. conditions of teeth and bones

1,2,3

To prevent underexposure, check and increase ___________ as needed.1. exposure time2. kilovoltage3. milliamperage

1,2,3

Which of the following choices would represent the suggested receptor placement sequence for a patient who is likely to gag?1. Anterior2. Premolar3. Molar

1,2,3

Which of the following items should be removed by the patient during preparation for dental image procedures?1. Eyeglasses2. Dentures3. Chewing gum

1,2,3

Which of the following statements is true of the statute of limitations?1. It often begins when the patient discovers or should have discovered that an injury has occurred as a result of dental negligence.2. It is the time period during which a patient may bring a malpractice action.3. It may not begin until years after the dental negligence occurred.

1,2,3

Which of the following techniques use the same principles of horizontal angulation?1. Paralleling2. Bisecting3. Bite-wing

1,2,3 Paralleling, bisecting, and bite-wing techniques all use the same principles of horizontal angulation.

Who among the following categories of dental professionals is qualified to mount dental radiographs?1. Dentist2. Dental hygienist3. Dental assistant

1,2,3 The dentist, dental hygienist, and dental assistant are all qualified to mount dental radiographs. A dental assistant with knowledge of normal anatomic landmarks is qualified. In many offices, the dental hygienist and dental assistant mount most of the dental radiographs, but the dentist may do so on occasion.

Which of the following surfaces on the x-ray machine must be covered or disinfected?1. Control panel2. Exposure button3. Tubehead4. Position-indicating device (PID)

1,2,3,4

Which of the following viruses may be present in oral secretions?1. Cytomegalovirus2. Hepatitis B virus3. Herpes simplex virus4. Human immunodeficiency virus

1,2,3,4

Precautions should be taken during dental imaging procedures to which of the following critical organs in the head and neck region? (1) skin, (2) thyroid gland, (3) lens of the eye, and (4) bone marrow

1,2,3,4 Critical organs exposed during dental imaging procedures in the head and neck region include skin, thyroid gland, lens of the eye, and bone marrow. Skin, thyroid gland, and lens of the eye are true; however, bone marrow is also correct. Skin, thyroid gland, and bone marrow are true; however, lens of the eye is also correct. Thyroid gland and bone marrow are true; however, skin and lens of the eye are also correct.

Common uses of three-dimensional imaging include which of the following?1. Implant placement2. Extraction or exposure of impacted teeth3. Definition of anatomic structures4. Airway and sinus analysis5. Evaluation of temporomandibular joint disorders

1,2,3,4,5

A film mount may be made of1. cardboard.2. lead foil.3. plastic.4. vinyl.

1,3,4 A film mount may be made of cardboard, plastic, or vinyl. They are not made of lead foil, which is a component of the film package.

On a dental image, the alveolar crest is typically located _________ mm below the junction of the crown and the root surfaces.

1.5 to 2.0

In order to be used for digital imaging, the x-ray unit timer must be adapted to allow exposures in a time frame of _______ of a second.

1/100

The potential risk of dental radiography inducing a fatal cancer in an individual is about _________ the risk of a person developing cancer spontaneously.

1/1000

Receptor should be placed approximately ____ inch beyond the incisal or occlusal surfaces when using the bisecting technique.

1/8 The receptor should be placed approximately 1/8 inch beyond the incisal or occlusal surfaces when using the bisecting technique.

With the bite-wing technique, the vertical angulation is predetermined; the central ray is directed at ____ degrees to the occlusal plane.

10+ With the bite-wing technique, the vertical angulation is predetermined; the central ray is directed at +10 degrees to the occlusal plane.

One gray is equivalent to ______ rad(s).

100

Conventional dental x-ray film has a resolution of ___________ lp/mm.

12 to 20

____________ periapical images can be used to examine the edentulous arches.

14

According to the text, when exposing a complete mouth image series (CMS) using the bisecting technique, there are ____ recommended size 2 periapical receptor placements.

14 According to the text, when exposing a CMRS using the bisecting technique, there are 14 recommended size 2 periapical receptor placements.

How many dental images would you take for a CMR on your edentulous patient?

14 In a patient without teeth, 14 periapical images are usually sufficient to cover the edentulous areas.

How many dental images would you take on your patient if you were taking a CMS?

14-20 A total of 14 to 20 images may be included in the CMS.

The authors recommend using a size ____ receptor for anterior teeth and a size ____ receptor for posterior teeth.

1;2 The authors recommend using a size 1 receptor for anterior teeth and a size 2 receptor for posterior teeth.

A size ____ receptor is typically used for the edentulous examination.

2

The most frequently used film size for adult intraoral imaging is size:

2

The superior foramina of the incisive canal are _____ tiny openings or holes in bone.

2

Which size receptor would you use to take an occlusal image on your 3-year-old patient?

2

The rule of isometry states that two triangles are equal if they have ______ equal angle(s) and share a common side.

2 The rule of isometry states that two triangles are equal if they have two equal angles and share a common side.

Which of the following influencing factors would degrade sharpness?(1) Smaller silver halide crystal size(2) Larger silver halide crystal size(3) Smaller focal spot(4) Larger focal spot

2 and 4

Which of the following exposure sequences is recommended for the patient who requires both periapical and bite-wing images?1. Bite-wing exposures2. Anterior periapical receptors3. Posterior periapical receptors

2,3,1

Which of the following commercially available receptor holders are recommended for use with both the paralleling and the bisecting techniques?1. Rinn XCP instruments2. Rinn BAI instruments3. Precision receptor holder4. Stabe bite-block5. Snap-A-Ray receptor holder

2,4,5 Rinn BAI instruments, Stabe bite-block, and Snap-A-Ray receptor holder are recommended for use with either the paralleling or the bisecting technique.

For the transcranial projection, the central ray is directed toward a point _____ inches above and 0.5 inches behind the opening of the ear canal.

2.0

Periapical images must show the entire crowns and roots of the teeth being examined as well as ____ to ____ mm beyond the root apices.

2.0-3.0 Periapical images must show the entire crowns and roots of the teeth being examined as well as 2.0 to 3.0 mm beyond the root apices.

State and federal laws require that dental x-ray machines operating above 70 kVp have a minimum total (inherent plus added filtration) of ____ mm of aluminum filtration.

2.5 State and federal laws require that dental x-ray machines operating above 70 kVp have a minimum total (inherent plus added filtration) of 2.5 mm of aluminum filtration.

A circular collimator produces a cone-shaped beam that is __________ inch(es) in diameter.

2.75

A developmental disability is a substantial impairment of mental or physical functioning that occurs before age ____ years and is of indefinite duration.

22

The mixed occlusal and periapical examination on an edentulous patient consists of _______ size 4 receptors and ________ size 2 receptors.

2;4

Viewing software allows the practitioner to select the region of interest and to scroll through these images on a computer monitor to create three-dimensional information that will assist in ____________.1. obtaining insurance reimbursement2. referrals3. diagnosis and treatment planning

3

_______ sizes of bite-wing receptors are available.

3

It is appropriate for any dental professional to discuss a patient's care with1. another patient.2. office staff members who are not involved in the treatment of the patient.3. another dentist involved in the patient's care.4. a physician with whom care is shared.

3,4

How many shades of gray can the human eye distinguish?

32

You are 36 years old. What is your cumulative occupational dose recommended by the National Council on Radiation Protection and Measurements (NCRP)?

360mSv

An occlusal receptor (size ____) may be used for some extraoral images.

4

Generally, there are ____ elements to informed consent.

4

In adults, size ____ receptor is used in the occlusal examination.

4

Explain to your patient the steps, in order, in the formation of hydrogen peroxide, a toxin that will cause damage to living tissues.1. Free radicals combine2. Free radical formation3. Cellular dysfunction and biologic damage4. X-ray photons are absorbed by water

4,2,1,3

The pediatric projection is recommended for use in children ____ years old or younger.

5

The annual maximum permissible dose (MPD) of radiation for an occupational worker is:

5 rem or .05 sV

According to the current recommendations (2003) of the National Council on Radiation Protection and Measurements, the current MPD for occupationally exposed persons is ___________/year.

5.0 rem The current MPD for occupationally exposed persons is 5.0 rem/year. According to the current recommendations (2003) of the National Council on Radiation Protection and Measurements, the current MPD for occupationally exposed persons is 5.0 rem/year.

Your patient is concerned about the amount of x-ray exposure she has had because she had x-rays taken quite often at her previous dental office. You explain to her that the images are necessary and you will be taking digital images which require _________ exposure than the films she previously had taken. Exposure times are ________ than that required for conventional radiography.

50%-90% less

Which of the following is the most commonly used extraoral film size?

5x7

If you are taking an anterior image sequence, which tooth do the authors recommend you begin with?

6

According to the text, when exposing the anterior teeth using the bisecting technique, there are ________ recommended size 2 periapical receptor placements.

6 With a size 2 receptor, a total of six anterior receptor placements are used in the bisecting technique.

The use of F-speed film instead of D-speed film reduces the absorbed dose by ____%.

60%

How many exposures of the posterior teeth will you need to take when using the paralleling technique?

8

Which target-receptor distance should be used in the paralleling technique to compensate for image magnification and loss of definition?

8 inches 4 inches will not compensate for image magnification in the paralleling technique. A long (16-inch) target-receptor distance must be used. 8 inches will not compensate for image magnification in the paralleling technique. A long (16-inch) target-receptor distance must be used. 12 inches will not compensate for image magnification in the paralleling technique. A long (16-inch) target-receptor distance must be used. A long (16-inch) target-receptor distance must be used with the paralleling technique to compensate for image magnification.

When the right-angle technique is used, an occlusal receptor is exposed directing the central ray at ____ degrees to the receptor.

90

In order to avoid the primary beam while taking dental images, you should stand at a ____-degree to ____-degree angle to the beam.

90;135

Current fast radiographic film requires ____ % less exposure time than the initial exposure times used in 1920.

98 Current fast radiographic film requires 98% less exposure time than the initial exposure times used in 1920.

Which type of PID would be most effective in reducing patient exposure?

A 16-inch rectangular PID A conical PID would be least effective in reducing patient exposure. A 16-inch round PID would not be as effective in reducing patient exposure as a 16-inch rectangular PID. An 8-inch rectangular PID would not be as effective as a 16-inch rectangular PID in reducing patient exposure. A 16-inch rectangular PID would be most effective in reducing patient exposure.

You are on a mission trip, and your responsibility is to take radiographs. You are using a handheld x-ray machine, digital sensors, and a receptor holder. Sterilization is not available. Which of the following receptor holders would you use?

A Uni-bite. An EEZEE-Grip is a molded-plastic device that can be sterilized and is a double-ended instrument that holds the receptor between two serrated plastic grips that can be locked in place. A Stabe bite-block is a disposable Styrofoam bite-block with a backing plate and a slot for receptor retention. The EEZEE-Grip was originally called a Snap-A-Ray. A Uni-bite is not disposable.

Which of the following films would most likely appear black?

A film exposed to light

There are three conditions that must be present for an infection to occur. Which of the following conditions is a necessary component for an infection to occur?

A way for the infectious disease to enter the host

correct when taking your retake to prevent this from reoccurring?

Adjust receptor exposure.

Which of the following areas would appear the most radiopaque on a dental image?

Air space

Which of the following are beam alignment devices?

An XCP The Stabe bite-block is a Styrofoam receptor holder. The XCP bite-block is a Styrofoam receptor holder. The EEZEE-Grip is a plastic receptor holder. An XCP is a beam alignment device.

Which of the following constitutes a person who can provide legal informed consent?

An adult (over the age of 18) who is of sound mind

Which of the following statements is true of ionization?

An atom that gains an electron has a negative charge, and an atom that loses an electron has a positive charge. This answer is not the best answer. An atom that gains an electron has a negative charge; however, an atom that loses an electron has a positive charge. An atom that loses an electron will have a positive charge. An atom that loses an electron has a positive charge; however, an atom that gains an electron has a negative charge. An atom that gains an electron will have a negative charge, and an atom that loses an electron will have a positive charge.

Which subatomic particle carries a negative electrical charge?

An electron A neutron does not carry an electrical charge. A proton carries a positive electrical charge. An electron carries a negative electrical charge. A nucleon carries a positive (proton) or no (neutron) electrical charge.

Your patient really doesn't understand why images are necessary. You need to take images because your patient has extensive restorations and you suspect recurrent decay under several restorations. Which of the following educational methods should you use to help the patient gain the best understanding of why images are needed?

An oral presentation with printed literature

Identify the cause of the lines the arrows are pointing to on your patient's dental

Artifacts on the phosphor plates

When are bite-wings and periapical images prescribed?

As needed, based on the patient's individual needs The dentist uses professional judgment to make decisions about the number, type, and frequency of dental images. Every patient's dental condition is different, and therefore every patient must be evaluated for dental images on an individual basis.

Which of the following suggestions are intended to help reduce the gag reflex?

Asking the patient to suspend an arm or leg in the air

Which is NOT true regarding infection control in dental radiography?

Barriers do not need to be used, because spatter of blood and saliva is unlikely.

When Rinn BAI instruments are used, "BAI" refers to which of the following?

Bisecting angle instrument

Which of the following choices is a type of lateral jaw projection?

Body of the mandible projection

When taking a premolar bite-wing image, in order to follow rule number 5 of the bite-wing technique, receptor exposure, what must the mesial part of the PID cover?

Both canines

When taking images on a patient with a hearing disability, you should wear your mask because of infection control guidelines.

Both parts of the statement are false

You should have your 75-year-old patient remove her partial dentures and her hearing aids before taking a panoramic image because ghost images occur that could cover diagnostic information on the panoramic image.

Both parts of the statement are true.

When taking a molar bite-wing image, in order to follow rule number 5 of the bite-wing technique, receptor exposure, what must the mesial part of the PID cover?

Both second premolars

If your patient refuses images, you will not be able to provide dental care on your patient, because providing treatment without necessary images is considered negligence.

Both statements and reason are true.

(1) As kilovoltage, milliamperage, and time increase, x-ray beam intensity decreases. (2) As distance and filtration increase, the intensity of the x-ray beam increases.

Both statements are false.

(1) Cancellous bone is considered radiopaque. (2) Cortical bone is considered radiolucent.

Both statements are false.

(1) Given that the human eye can resolve 8 to 10 lp/mm, a CCD system is inadequate for diagnosis of dental disease. (2) The majority of research has shown that the traditional radiographs perform at least as well as digital images and, at times, even better.

Both statements are false.

(1) If the field of view is large, findings or pathology in other regions of the oral and maxillofacial complex may be accidently included. (2) The size of the field of view should not matter if a high-quality machine is used.

Both statements are false.

(1) Radiation is the emission and propagation of energy through space or a substance in the form of waves or particles. (2) Radioactivity can be defined as the process by which certain unstable atoms or elements undergo spontaneous disintegration, or decay, in an effort to attain a more balanced nuclear state.

Both statements are true.

An anatomic structure that is located outside of the focal plane and close to the x-ray source can cast a ghost image on the panoramic image. The ramus of the mandible is one example of a structure that can cast a ghost image on the panoramic image.

Both statements are true.

In treating children with a primary or transitional dentition, the bisecting technique is preferred, because the small size of the mouth precludes the placement of a receptor beyond the apical regions of the teeth.

Both statements are true.

An unexposed film appears

CLEAR

Which discovery was the precursor to the discovery of x-rays?

Cathode rays Beta particles are fast moving electrons emitted from the nucleus of radioactive atoms and are not associated with x-rays. Alpha particles are emitted from the nuclei of heavy metals and are not associated with x-rays. Wilhelm Roentgen was experimenting with cathode rays when he discovered x-rays. Radioactive materials are certain unstable atoms or elements that are in the process of spontaneous disintegration or decay.

Which of the following statements is true of somatic effects of irradiation?

Changes are not transmitted to future generations.

Which component in the panoramic x-ray machine tubehead is most different from that found in an intraoral x-ray machine tubehead?

Collimator

Which is the most common possibility when an x-ray photon interacts with matter?

Compton scatter No interaction means the photon passed through matter without any interaction. Absorption (photoelectric effect) accounts for 30% of the interactions with matter from the dental x-ray beam. Compton scatter accounts for 62% of the interactions with matter that occur in diagnostic radiography. Coherent scatter accounts for only 8% of the interactions with matter from the dental x-ray beam.

Your digital panoramic image appears dark and has burned-out areas. Which of the following would you need to adjust in order to have a diagnostic image?

Computer software

You will need to take a retake on your patient's mandibular right premolars because of overlapping. The overlapping is more excessive toward the mesial of the film than the distal of the film. What do you need to do to prevent this error on the retake?

Correct horizontal angulation, direct the PID more toward the distal.

Which occlusal projection is used to locate foreign bodies or salivary stones in the region of the floor of the mouth?

Cross-sectional occlusal projection

Radiopaque artifacts or radiolucent scratch marks on the image indicate which of the following?

Debris accumulation on the sensor

The teeth on your dental images appear shorter than your patient's teeth, which of the following would you correct when retaking the dental image?

Decrease vertical angulation Incorrect horizontal angulation results in overlapped ("unopened") contact areas. Elongation of images results from insufficient vertical angulation. Foreshortening of images results from excessive vertical angulation, you will need to decrease vertical angulation.

You have noticed that your mandibular incisors are foreshortened; how would you correct this problem?

Decrease vertical angulation.

Which of the following changes will increase x-ray beam intensity?

Decreasing the source-to-film distance

Which of the following statements is true of the use of voltage in dental x-ray equipment?

Dental x-ray equipment requires the use of 60 to 70 kilovolts.

Which of the following forms of electromagnetic radiation has the shortest wavelength?

Dental x-ray wave A radio wave has a wavelength as long as 100 meters. A television wave has a wavelength of approximately 1 meter. A radar wave has a wavelength of 1/100 of a meter. The dental x-ray wave has a wavelength of 0.1 nanometer, or 0.00000000001 meter.

Which is the correct order of steps in manual processing?

Develop, rinse, fix, and wash

The acronym, DICOM, stands for

Digital Imaging and Communication in Medicine.

Three-dimensional imaging is encoded for handling, storage, and transmission by which of the following?

Digital Imaging and Communications in Medicine

Which of the following would be a reason to switch from film to direct digital imaging?

Digital images can be printed when needed.

You are taking dental images on your patient. You have directed the position indicating device (PID) perpendicular to the tooth and the receptor. Which of the following would you minimize by doing this?

Dimensional distortion

You need to take a maxillary occlusal image on your 4-year-old patient. Which of the following will you need to do?

Direct the PID at a +60-degree angle.

The contacts on your dental image are closed. You will need to take a retake. What should you do in order to achieve open contacts on your retake dental image?

Direct the PID through the contacts of the teeth.

Which of the following would be an example of the use of interpersonal skills rather than technical skills with patients?

Discussing the rationale for use of dental images

Your patient's mother is concerned because her two-year-old son doesn't have all of his teeth. What should you tell her?

Don't worry, his teeth should be in by the time he is three.

You have entered a wrong entry in the dental record. Which of the following should you do?

Draw a single line through the incorrect entry, initial it, write in the correct entry.

Which of the following can be used for cleaning and disinfection of the dental unit and environmental surfaces?

EPA-registered chlorine-containing compounds labeled as both hospital disinfectants and tuberculocidals

Who exposed the first dental radiograph in the United States using a live person?

Edmund Kells Otto Walkoff was a German dentist who made the first dental radiograph. Wilhelm Roentgen was a Bavarian physicist who discovered the x-ray. Edmund Kells exposed the first dental radiograph in the United States using a live person. Price introduced the bisecting technique in 1904.

Cathode rays are derived from which of the following types of particulate radiation?

Electrons Cathode rays are derived from electrons. Alpha particles are emitted from the nuclei of heavy metals. Protons are accelerated particles with a mass of 1 and a charge of +1. Neutrons are accelerated particles with a mass of 1 and no electrical charge.

Which is NOT consistent with the ALARA principle?

Exposing radiographs at predetermined intervals

If the tubehead drifts, which component of the x-ray machine needs attention?

Extension arm

Which component of the x-ray machine functions in positioning the tubehead?

Extension arm

On a panoramic image, which of the following structures appears radiolucent on images and is located above and in front of the mastoid process?

External auditory meatus The external auditory meatus appears as a round-to-ovoid radiolucency anterior and superior to the mastoid process. The hamulus is located posterior to the maxillary tuberosity. The hamulus appears as a radiopaque hook-like projection posterior to the maxillary tuberosity area. On a panoramic image, the maxillary tuberosity appears as a radiopaque bulge distal to the third molar region. The coronoid process is a marked prominence of bone found on the anterior superior ramus of the mandible. The coronoid process appears as a triangular radiopacity posterior to the maxillary tuberosity region.

____-speed film is currently the fastest intraoral film available.

F D-speed film (ultra-speed) is the oldest and slowest intraoral film available. E-speed film (ekta-speed) is faster than D-speed film but slower than F-speed film. F-speed film is currently the fastest intraoral film available. G-speed film does not exist at this time.

Who modified the paralleling technique with the introduction of the long-cone technique?

F. Gordon Fitzgerald C. Edmund Kells introduced the paralleling technique in 1896. Franklin W. McCormack reintroduced the paralleling technique in 1920. F. Gordon Fitzgerald modified the paralleling technique with the introduction of the long-cone technique. This is the technique currently used. Howard Riley Raper modified the bisecting technique and introduced the bite-wing technique in 1925.

Which of the following choices may be the cause of an unexposed film or receptor?

Failure to turn on the x-ray machine

Which film placement guideline is legitimate?

Film is centered over the areas to be examined

Which is associated with incorrect vertical angulation?

Foreshortening

What specific mechanism of radiation injury may result in the formation of hydrogen peroxide when x-ray energy is absorbed by patients?

Free radical formation created by the ionization of water may occur. This is an example of ionization; hydrogen peroxide may be formed as a result of free radical formation. Free radical formation created by the ionization of water may occur. Hydrogen peroxide may be formed as a result of the recombination of free radicals created by the ionization of water.

Which of the following statements is true of the wave concept of electromagnetic radiation?

Frequency and wavelength are inversely related. Velocity refers to the speed of the wave. Frequency refers to the number of wavelengths that pass a given point in a certain amount of time. Wavelength is defined as the distance between the crest of one wave and the crest of the next. Frequency and wavelength are inversely related: if the frequency of the wave is high, the wavelength will be short, and if the frequency is low, the wavelength will be long.

Which muscles attach to the genial tubercles?

Genioglossus and geniohyoid

Which of the following statements is true of the average dose of background radiation received by an individual in the United States?

Geographic areas at higher elevations are associated with increased amounts of cosmic radiation.

What can you do to reduce the risk of a gag reflex?

Give your patient a cup of ice water to drink to try to reduce tactile stimuli.

The contacts on your dental image are overlapped, which of the following would you correct when retaking the image?

Horizontal angulation

Which basic rule of paralleling indicates that the central ray should be directed through the contact area of the teeth?

Horizontal angulation Receptor placement, the first basic rule of paralleling, indicates the receptor must be positioned to cover the prescribed area of teeth to be examined. Horizontal angulation, the fourth basic rule of paralleling states that the central ray of the x-ray beam must be directed through the contact areas between teeth. Vertical angulation, the third basic rule of paralleling states that the central ray of the x-ray beam must be directed perpendicular (at a right angle) to the receptor and the long axis of the tooth. Receptor position, the second basic rule of paralleling, indicates the receptor must be positioned parallel to the long axis of the tooth.

Which of the following elements is the simplest atom?

Hydrogen (H #1)

Your patient is concerned about radiation exposure. Which of the following explanations would you give to your patient to help calm her concerns?

I am using this collimator attachment, which will decrease the x-ray dose you receive by 60-70%. Use of digital radiographs rather than F-speed film will decrease patient exposure to radiation during dental imaging procedures by 50%-90%. Rectangular collimation will decrease patient exposure to radiation during dental imaging procedures by 60% to 70%. The bisecting technique uses a shorter source-to-receptor distance, which will increase patient exposure to radiation. The paralleling technique, which uses a longer source-to-receptor distance, will reduce patient exposure to radiation during dental radiographic procedures. Erythema occurs after the absorption of 250 rads (2.5 Gy) in a 14-day period. That is equal to 500 dental films.

Which of the following would you place in the patient's mouth in order to take dental x-rays?

Image receptor An image is a picture or likeness of an object. An image receptor is the recording medium (film, phosphor plate, or digital sensor) that is placed in the patient's mouth to record the image produced by the x-rays. A radiograph is an image of two-dimensional representation of a three- dimensional object. A dental radiograph is the dental image produced on a recording medium.

Your patient has heard a lot of stories and is apprehensive about receiving x-rays. Which of the following could you tell your patient to calm her fears?

Images are prescribed on an individual basis. We will only take the images that are needed to provide a thorough oral assessment. This will limit your radiation exposure.

You are going to take dental images on your patient. He is larger than average. What machine setting adjustment should you make prior to taking dental images?

Increase impulses.

You have taken your first dental image on your patient. The contrast is high and you are looking for periodontal disease. You are using a DC machine and you have control of your settings. You have a 60- to 70-kV range and a 6- to 8-mA range. You had the kV set at 60, the mA set at 7, and the impulses set at 6/100. While leaving all other settings the same, which setting would you adjust to create better contrast for detecting periodontal disease?

Increase kV to 70.

In order to use the paralleling technique when taking periapical images on your patient, you will need to place the receptor approximately an inch from the teeth. Which of the following will you need to do to decrease image magnification?

Increase target-receptor distance.

You have noticed that your maxillary premolars are elongated, how would you correct this problem?

Increase vertical angulation.

Which of the following is an advantage of digital imaging?

Increased speed for viewing images Patient exposure is reduced with digital imaging. Digital sensors are more sensitive to x-rays than film. Digital sensors are rigid and bulky, causing decreased patient comfort. The image from digital sensors is uploaded directly to the computer and monitor without the need for chemical processing. This allows for immediate interpretation and evaluation. The image from digital sensors is uploaded directly to the computer and monitor without the need for chemical processing.

You have to take retake a dental image on your patient because the image is too light and is undiagnostic. Which of the following could you change to produce an image with increased density?

Increasing the exposure time

Heat is a byproduct of x-ray production. Which component of the x-ray tubehead dissipates the heat created by the production of x-rays?

Insulating oil The metal housing protects the x-ray tube and grounds the high-voltage components. Insulating oil absorbs heat created by the production of x-rays. Aluminum discs filter out nonpenetrating, longer-wavelength x-rays. The lead collimator restricts the size of the x-ray beam.

Which technique examines the crowns of both maxillary and mandibular teeth on a single image?

Interproximal examination The interproximal examination examines the crowns of both maxillary and mandibular teeth on a single image.

Your patient had x-rays taken in her previous dental office. She notices that the long metal tube at the end of the x-ray head is longer than it was at the other office. What explanation would you give for the purpose of the tube, or cone, attached to the x-ray head?

It aims and shapes the x-ray beam. The metal housing surrounds and protects the x-ray tube and grounds the high-voltage components. The tubehead seals the oil in the tubehead and acts as a filter to the x-ray beam. Aluminum discs filter out the nonpenetrating, longer-wavelength x-rays. The position-indicating device aims and shapes the x-ray beam.

Which of the following statements is true regarding the direct theory of radiation injury?

It involves damage to the critical areas of a cell through direct contact with the x-ray photon. The indirect theory of radiation injury involves absorption of an x-ray photon by water within a cell. The indirect theory of radiation injury involves the formation of toxins that damage cells. The direct theory of radiation injury involves a direct hit to and absorption of an x-ray photon within critical areas of a cell. The indirect theory of radiation injury involves the formation of free radicals.

Which of the following statements is true of ionizing radiation?

It is radiation that is capable of producing ions by removing or adding an electron to an atom.

Which of the following statements is true of the receptor holder?

It is required when using the intraoral paralleling technique. It is used to align an intraoral dental x-ray receptor. It does not require the patient to stabilize the receptor in the mouth. The receptor holder is required when using the intraoral paralleling technique. It is required when using the intraoral paralleling technique.

Which of the following statements is true of characteristic radiation?

It only occurs at 70 kV and above. General radiation is known as braking, or bremsstrahlung, radiation. Characteristic radiation is not the same as general radiation. Characteristic radiation occurs at 70 kV and above. General radiation is the source of the majority of the x-rays that are produced. The speeding electron passes close to the nucleus or hits the nucleus of the tungsten atom in general radiation.

Which statement is NOT true of electromagnetic radiation?

It travels at various speeds.

Your former patient has moved and would like his records including the original radiographs sent to his new dentist. Which of the following should you do?

Keep the original films and send the new dentist a duplicate set.

Which would you adjust if you wanted to produce characteristic radiation?

Kilovoltage

Which controls the penetrating power of the x-ray beam?

Kilovoltage selector

Which best describes the latent period?

Lapse of time from x-ray exposure until noticeable damage

Which of the following is a maxillary occlusal projection but not a mandibular occlusal projection?

Lateral occlusal projection

Which of the following structures is part of the sphenoid bone?

Lateral pterygoid plate The lateral pterygoid plate is part of the sphenoid bone. The glenoid fossa is part of the temporal bone. The articular eminence is part of the temporal bone. The styloid process is part of the temporal bone.

Your patient wants her original set of radiographs. She claims they are hers because she paid for them. Which of the following would be the best reply?

Legally they are the property of the dentist even though you or the insurance company pays for them.

Approximately what percentage of the kinetic energy of the electrons is converted to x-rays at the anode?

Less than 1%

Which of the following describes a ridge?

Linear protrusion of bone A ridge is defined as a linear prominence or projection of bone. A spine is a sharp, thornlike projection of bone. A tubercle is a small bump or nodule of bone. A tuberosity is a rounded prominence of bone.

Occlusal views are best suited to which purpose?

Locating fractures of the maxilla or mandible

The paralleling technique is preferred in the presence of which anatomic anomaly?

Long lingual frenum

When a high operating kilovoltage is used, (low/high) subject contrast and (many shades of gray/areas of black and white) are seen on the dental image.

Low subject contrast; many shades of gray

The acronym for the maximum dose permitted in a year is

MPD—maximum permissible dose MPD is the acronym for the maximum dose equivalent that a body is permitted to receive within a year. The MPD is the dose of radiation that the body can endure with little or no injury. The acronym for the permitted lifetime accumulated dose is MAD—maximum accumulated dose, now known as cumulative occupational dose.

Which posterior quadrant should you move to next (second) when using the paralleling technique?

Mandibular left quadrant The second quadrant in the recommended posterior periapical sequence for the Rinn XCP instruments is the mandibular left quadrant.

Your patient indicates he was shot around tooth number 30 with a BB when he was younger. The BB is still there. He would like it removed. You have been asked to take a dental image of the area to locate the buccal-lingual and anterior-posterior position of the BB. Which of the following would you take?

Mandibular occlusal image

Your patient asked you why dental images are important. Which of the following is the correct response?

Many dental diseases are typically discovered only through the use of dental images. An oral examination without dental images limits the practitioner to what is seen clinically. Many dental diseases and conditions produce no clinical signs and symptoms. Dental images are a necessary component of comprehensive patient care. Many dental diseases are typically discovered only through the use of dental images.

Which posterior quadrant would be the best for you to begin with when using the paralleling technique?

Maxillary right quadrant The recommended posterior periapical sequence for the Rinn XCP instruments starts with the maxillary right quadrant.

Which of the following structures may be seen on a periapical image?

Maxillary tuberosity The maxillary tuberosity may be seen on a periapical image. The mastoid process is not seen on a periapical image. The styloid process is not seen on a periapical image. The external auditory meatus is not seen on a periapical image.

________________ is/are the single largest contributor to artificial radiation exposure (0.00053 Sv/year).

Medical radiation Consumer products contribute 0.00009 Sv/year, less than medical radiation. Medical radiation is the single largest contributor to artificial radiation exposure. Fallout from atomic weapons contributes 0.00001 Sv/year, less than medical radiation. The nuclear fuel cycle contributes 0.00001 Sv/year, less than medical radiation.

Which structure appears radiopaque on dental x-ray film?

Metal restorations

Where should you position the mesial edge of the receptor when taking a premolar bite-wing image?

Midline of the mandibular canine

Where should you position the mesial edge of the receptor when taking a molar bite-wing image?

Midline of the mandibular second premolar

Distorted panoramic image

Midsagittal plane not perpendicular to floor

Which would you adjust if you wanted to create a larger electron cloud?

Milliamperage

Lower molar exposure

Mylohyoid ridge and ramus

Which of the following four possibilities that can occur when an x-ray photon interacts with matter is responsible for producing densities on a dental receptor that make dental radiography possible?

No interaction X-ray photons that pass through a patient without interaction are responsible for producing the densities on a dental receptor that make dental radiography possible. Absorption or photoelectric effect is incorrect; x-ray photons that pass through a patient without interaction are responsible for producing densities on a dental receptor that make dental radiography possible. Compton scatter is incorrect; x-ray photons that pass through a patient without interaction are responsible for producing densities on a dental receptor that make dental radiography possible. Coherent scatter is incorrect; x-ray photons that pass through a patient without interaction are responsible for producing densities on a dental receptor that make dental radiography possible.

If you change the exposure time of the x-ray unit, what is affected?

Number of x-rays produced

You have been asked to take a dental image of your patient's mandible. Which type of image would you take?

Occlusal Periapical images show the entire crowns and roots of the teeth being examined. Bite-wing images show the entire crowns of both the maxillary and mandibular teeth being examined. Occlusal images show large areas of the maxillary or the mandibular. Lateral jaw extraoral images show the posterior region of the mandible.

Damage to which cells could lead to genetic mutations?

Ovarian and sperm

Which of the following is an extraoral technique for dental image examination?

Panoramic The panoramic image is an extraoral technique for dental image examination. The interproximal image is an intraoral technique for dental image examination. The periapical image is an intraoral technique for dental image examination. The occlusal image is an intraoral technique for dental image examination.

Blurred panoramic image

Patient movement

Anterior teeth appear "skinny"

Patient positioned too anterior (too much bite block in mouth)

Anterior teeth appear "fat"

Patient positioned too posterior (not enough bite block in mouth)

Which property of x-rays allows for the image on the receptor?

Penetrating power X-rays have fluorescence capability, and they can cause substances to fluoresce. However, this is not a property that produces an image on a receptor. The penetrating power of the x-ray determines the x-ray's ability to penetrate matter. The amount of x-rays that pass through or are that are absorbed creates the image on the receptor. The focusing ability, which means an x-ray cannot be focused to a point, does not affect the production of an image on the receptor. X-rays cause biologic changes to living cells; this does not affect the production of an image on the receptor.

Which of the following images is used to evaluate the crown, roots, and supporting bone of a tooth?

Periapical The periapical intraoral image examination is used to examine the entire tooth (crown and root) and supporting bone; the interproximal examination does not show the entire root; the occlusal examination is used to examine large areas of the maxilla or the mandible on one image; the panoramic examination is an extraoral image.

What modification in technique is recommended when the patient has an edentulous space causing a problem with bite-wing receptor placement?

Place a cotton roll in the area of the missing tooth or teeth.

Which describes the most effective way to erase a phosphor storage plate (PSP)?

Place the phosphor side of the PSP on a bright dental view box for 1 to 2 minutes

Your patient has a palatal torus, where should you place the receptor?

Place the receptor on the far side of the torus.

Which of the following can you do after x-ray receptor exposure to reduce(s) the amount of x-radiation your patient receives?

Proper instrument technique Proper placement of the lead apron protects the patient during x-ray exposure. Proper image retrieval or receptor processing reduces the amount of x-radiation a patient would receive from retakes. Proper instrument technique reduces the amount of x-radiation a patient receives during x-ray exposure. Selecting proper exposure settings limits the amount of x-radiation a patient receives.

Which of the following should you do prior to taking x-rays to protect your patient from radiation exposure?

Proper prescribing of radiographs Proper film processing is an example of a patient protection technique used after x-ray exposure. Proper prescribing of radiographs is an example of a patient protection technique used before x-ray exposure. A lead apron is an example of a patient protection technique used during x-ray exposure. A thyroid collar is an example of a patient protection technique used during x-ray exposure.

On a panoramic image, which of the following structures appears as a radiolucency?

Pterygomaxillary fissure On a panoramic image, the pterygomaxillary fissure appears as a radiolucency. The lateral pterygoid plate is a wing-shaped bony projection of the sphenoid bone located distal to the maxillary tuberosity region. The lateral pterygoid plate appears as a radiopaque bony projection that lies distal to the maxillary tuberosity region. The medial pterygoid plate appears as a bony projection that lies medial to, and is obscured by, the lateral pterygoid plate. A fissure is a narrow space or cleft, so a greater number of photons would pass through this area of decreased density. The coronoid process is a marked prominence of bone found on the anterior superior ramus of the mandible. The coronoid process appears as a triangular radiopacity that lies posterior to the maxillary tuberosity region.

You have your patient in the chair, you have placed the receptor in your patient's mouth, and you have positioned the position-indicating device. Which of the following should you do next to take the x-rays?

Push the exposure button. The on-off switch turns the machine on and off; it should have been turned on before your patient was seated. The exposure button is depressed when you are ready to activate the machine to produce x-rays. The exposure light, which is illuminated during x-ray exposure, will automatically come on to indicate that the exposure button has been depressed. The control devices, which include the timer and kV and milliamperage selectors, are adjusted prior to exposing the patient to x-rays.

You have taken nineteen films, and the film holder holds twenty films. What should you do with the empty window frame?

Put black opaque paper in the window. When all the windows of the film mount are not filled with radiographs, the text recommends placing black opaque paper in the unused frames. Masking tape would be difficult to place and remove and is not suggested. Not placing anything fails to eliminate extraneous light. Using an unexposed film would eliminate extraneous light but would be wasteful.

Which of the following should you do first when using a daylight loader for film processing?

Put hands through openings of daylight loader.

Which of the following could you do to prevent stimulating your patient's gag reflex?

Put your finger on the tissue where the receptor will be placed to demonstrate the receptor placement.

Which of the following types of questions must be answered only by the dentist?

Questions about diagnosis

Which of the following receptor holders include aiming rings that aid in the alignment of the position-indicating device (PID) with the receptor?

RINN XCP instruments Rinn XCP instruments include aiming rings that aid in the alignment of the PID with the receptor.

Which term describes light or white areas on the radiograph?

Radiopaque

For which of the following projections would be you place the receptor parallel to the patient's cheek and have the patient tip her head 15 degrees toward the receptor with her chin slightly extended and elevated?

Ramus of the mandible projection

Which of the following is the fastest recommended screen and screen film combination?

Rare earth screen with green light

Your premolar image is undiagnostic, the mesial half of the dental image is radiopaque. You are missing the canine and first premolar, and the distal edge of the radiopaque area is curved. Which of the following will you adjust to correct this error for the retake?

Receptor exposure Incorrect receptor placement, the first basic rule of bisecting, would affect which teeth were visible on the receptor. Incorrect vertical angulation, the third basic rule of bisecting, causes images that are either elongated or foreshortened. Incorrect horizontal angulation, the fourth rule of bisecting, results in overlapped ("unopened") contact areas. Incorrect receptor exposure caused the conecut on your image. You must correct receptor exposure, the fifth basic rule of bisecting. The x-ray beam (PID) must be centered on the receptor to ensure that all areas are exposed.

Which of the following combinations will result in the lowest absorbed dose for the patient from a 20-film series of dental radiographs?

Rectangular collimation with digital sensor The lowest absorbed dose for the patient from a 20-film series of dental radiographs will result from the use of rectangular collimation with a digital sensor. The lowest absorbed dose for the patient from a 20-film series of dental radiographs will result from the use of rectangular collimation with F-speed film.

Which advantage is associated with panoramic radiography?

Reduced radiation exposure

In order to take this projection, you need to have your patient face the receptor, touch his forehead to the receptor, tuck his chin down to his chest, and open his mouth as wide as he can. Which projection is this?

Reverse Towne

You have been asked to take a dental image to locate a fracture at the neck of the condyle. Which projection would you take?

Reverse Towne

Which is the most common film holder used to position and hold the dental x-ray film?

Rinn XCP

Which of the Rinn beam alignment device includes one ring and one arm that can be used for anterior, posterior, and bite-wing receptor positioning?

Rinn XCP Extension Cone Paralleling System The Rinn XCP Extension Cone Paralleling System includes three plastic bite-blocks, three plastic aiming rings, and three metal indicator arms. It may be used with film, PSP sensors, and digital sensors. The Rinn XCP-ORA One Ring Arm Positioning System includes one ring and one arm. It was designed to be universal and accommodates anterior, posterior, and bite-wing receptor placement. It may be used with film, PSP sensors, and digital sensors. The Rinn XCP-DS FIT Universal Sensor Holder is a bite-block that includes a self-adjusting clip that stretches to accommodate the size of the digital sensor, regardless of brand or size. The Rinn Flip-Ray System uses a rotating bite-block and ring to eliminate multiple positioning parts. It may be used with film or PSP sensors.

Which form of the x-ray beam is most detrimental to the patient and operator?

Scatter radiation Primary radiation is the penetrating x-ray beam produced at the target of the anode. Secondary radiation is created when the primary beam interacts with matter. Scatter radiation is the most detrimental to the patient and operator. The useful beam is another term for primary radiation.

Which sequence promotes infection control during film exposure?

Seat the patient, place the lead apron, wash and dry hands, don gloves

You are in charge of monitoring the film badges. Film badges are checked on a quarterly basis. Your co-worker is 4 months pregnant. The badge registered 5.0 Sv for the previous quarter. Based on the National Council on Radiation Protection and Measurements (NCRP), what information should you give the dentist?

She has exceeded her maximum dosage and cannot have any more exposure during the pregnancy.

Which of the following is associated with long-term radiation effects?

Small amounts of radiation absorbed over a long period Symptoms of short-term radiation effects include diarrhea, hair loss, and hemorrhage. Long-term radiation effects are associated with small amounts of radiation absorbed over a long period. Short-term radiation effects are associated with large amounts of radiation absorbed over a short time. Short-term radiation effects are associated with acute radiation syndrome. Clinical effects that are seen within minutes, days, or weeks of the radiation exposure are termed short-term effects.

Which tissue has the highest radiation sensitivity?

Small lymphocytes

Which of the following factors would improve image sharpness?

Smaller crystal size in the film

White shadow over the center of the panoramic image

Spine not straight

Which of the following commercially available receptor holders is recommended for one-time use only?

Stabe bite-block

Which of the following is a disposable receptor holder designed for one-time use only?

Stabe bite-block Rinn XCP instruments are autoclaved between patients. Precision receptor holders are autoclaved between patients. The Stabe bite-block is a disposable receptor holder designed for one-time use only. The Snap-a-ray receptor holder is autoclaved between patients.

Which of the following intraoral receptor holders is a disposable Styrofoam bite-block?

Stabe bite-block The EEZEE-Grip is a double-ended instrument that holds the receptor between two serrated plastic grips. The Stabe bite-block is a disposable Styrofoam bite-block. The EndoRay is used during root canal procedures. The Uni-bite is a plastic holder.

Which measure protects against occupational exposure to radiation?

Stand at a right angle (90 degrees) to the beam

Which of the following would you need in order to perform efficient, accurate dental imaging procedures on your patients?

Sufficient knowledge and technical skills

Your patient warned you about her gag reflex. She said that no one has ever been able to take dental images on her. She started gagging on the maxillary anterior images. You have tried several things but have not had any luck. You tried topical anesthetic on the soft palate, salt on her tongue, and having her lift her foot. What should you do?

Take a panoramic image to gather diagnostic information.

Your patient is a 5-year-old boy who you have been seeing since he was 3 years old. He is always eating candy and drinking cola beverages. Six months ago he had A, J, and T restored. One year ago he had B, I, and L restored. Which of the following should you do regarding taking radiographs?

Take bite-wings and occlusal radiograph today.

You have just placed the receptor to expose the maxillary right molar and your patient has started gagging. What should you do?

Take the receptor out of your patient's mouth as quickly as possible.

How does the CMOS detector differ from the CCD detector?

The CMOS detector is silicon-based and differs from the CCD detector in the way that the pixels are read.

When the bisecting technique is used, which of the following angles is bisected?

The angle formed by the receptor and the long axis of the tooth The angle formed by the receptor and the long axis of the tooth is the angle that is bisected when the bisecting technique is used.

Bisecting and paralleling are two methods used for obtaining which of the following dental images?

The bisecting and paralleling methods are used for taking periapical images.

The bite-wing image is used in the

The bite-wing image is used in the interproximal examination.

Which of the following components of the x-ray machine would have two indicator lights?

The control panel The x-ray tube is inside the tubehead; it does not have indicator lights. The x-ray tubehead contains the x-ray tube; it does not have indicator lights. The control panel has an indicator light for the on-off switch and an indicator light for the exposure button. The extension arm is used to position the tubehead; it does not have indicator lights.

Which of the following statements is true of dental images and the patient's dental record?

The dental record must include documentation of the number and type of dental images exposed.

You are showing your patient a bite-wing image. Your patient points to a portion of the tooth that is the most radiopaque and wants to know what it is. What portion of the tooth is your patient pointing to?

The enamel

_________________ regulate(s) the manufacture and installation of dental x-ray equipment.

The federal government While state governments may regulate how dental x-ray equipment is used, the federal government regulates the manufacture and installation of dental x-ray equipment.

What is the cause of a double exposure?

The film was exposed in the patient's mouth twice.

When a patient refuses dental images the dentist has deemed are necessary for treatment planning, the dentist should refuse to treat the patient; however, the patient could sign a release form that would allow the dentist to continue with the patient's treatment.

The first part of the statement is true; the second part of the statement is false.

(1) A thyroid collar is used for Waters, submentovertex, and reverse Towne projections. (2) A thyroid collar is not used for the lateral jaw, lateral cephalometic, and the posteroanterior projections.

The first statement is false; the second statement is true.

(1) Cone-beam computed tomography utilizes a vertical, narrow x-ray beam, similar to panoramic imaging, to acquire three-dimensional information. (2) The source of radiation in the CBCT machines rotates around the head of the patient.

The first statement is false; the second statement is true.

(1) Cone-beam data is said to have a 1:2 relationship with the anatomy. (2) With CBCT imaging, anatomy can be accurately reproduced, the superimposition of structures is eliminated, and image magnification doesn't occur.

The first statement is false; the second statement is true.

(1) Digital sensors can be disinfected, sterilized, placed in cold sterilization, or be placed in barriers. (2) When using barriers, disinfect the sensor, cover both the sensor and the wire connection with a plastic barrier, and then cover with a finger cot to provide added protection.

The first statement is false; the second statement is true.

A panoramic radiograph can be substituted for a complete series of dental images. A panoramic radiograph does not clearly reveal changes in teeth, such as tooth decay, or the details of the supporting bone.

The first statement is false; the second statement is true.

All panoramic units have the same focal trough size and shape. Panoramic units may have different receptor transport mechanisms.

The first statement is false; the second statement is true.

The panoramic image is the preferred image for the detection of caries and periodontal disease. The panoramic image is preferred for the evaluation of eruption patterns, growth, and development.

The first statement is false; the second statement is true.

(1) When using the paralleling technique, you must be conscious of fixed vertical angulations. (2) The paralleling technique creates dental images free from dimensional distortion.

The first statement is false; the second statement is true. The paralleling technique does not rely on fixed vertical angulations and produces a radiographic image without dimensional distortion.

(1) When taking maxillary periapical images on a patient with a shallow palate, there is only one technique that can be used to compensate for lack of parallelism. (2) To compensate for lack of parallelism, the vertical angulation can be increased by 5 to 15 degrees more than the XCP instrument indicates.

The first statement is false; the second statement is true. When the patient has a shallow palate requiring a modification in technique, there are two compensation techniques that can be used. Two cotton rolls can be placed, one on each side of the biteblock, or the vertical angulation can be increased by 5 to 15 degrees more than the XCP instrument indicates.

(1) When using the bisecting technique, the receptor holder or the patient's finger may be used to stabilize the receptor. (2) A beam alignment device is used to stabilize the receptor and to align the position-indicating device (PID).

The first statement is false; the second statement is true. When using the bisecting technique, a receptor holder may be used to stabilize the receptor. The patient's finger should not be used. A beam alignment device is used to stabilize the receptor and to align the position-indicating device.

(1) Size 3 receptor can only be used for bite-wing images. (2) Size 3 receptor is the recommended size for adult bite-wing images.

The first statement is true; the second statement is false

(1) A primary advantage to digital imaging is the superior gray-scale resolution that results. (1) Digital imaging uses up to 32 shades of gray.

The first statement is true; the second statement is false.

(1) Contrast resolution and the size of the field of view can both be adjusted on CBCT machines. (2) Spatial resolution cannot be adjusted.

The first statement is true; the second statement is false.

(1) Density is the overall darkness or blackness of a dental image. (2) When the kilovoltage is increased while other exposure factors remain constant, the resultant image exhibits a decreased density and appears lighter.

The first statement is true; the second statement is false.

(1) Failure of the dental practitioner to evaluate, interpret, and document observations outside the region of dental interest could result in negative consequences for the patient. (2) It is not the responsibility of the dental practitioner to recognize findings and pathology outside the region of dental interest.

The first statement is true; the second statement is false.

(1) In preparation for a CBCT scan, you should explain to your patient how she will be positioned and the length of time she will need to be motionless. (2) Your patient will be able to leave her jewelry on but will need to remove her partial denture.

The first statement is true; the second statement is false.

(1) One of the advantages of using DICOM Data is that images among dental professionals, imaging centers, and physicians may be shared. (2) The volume of data produced is similar to medical computed tomography but CBCT uses more radiation to acquire the images.

The first statement is true; the second statement is false.

(1) The contaminated barriers should be removed while the dental radiographer is wearing gloves. (2) The barriers should be disposed of after the patient has left the room.

The first statement is true; the second statement is false.

(1) The text recommends that you choose a particular order for viewing the mounted radiographs to prevent skipping a radiograph. (2) When viewing radiographs, you should look carefully at each film so that you only have to look at the set of radiographs once.

The first statement is true; the second statement is false.

(1) When you are preparing the sensor to use on your patient, it would be best to cover the sensor with a finger cot and then put on the barrier sleeve. (2) When you are placing the digital sensor in your patient's mouth, you would use a different placement technique than you would normally use when placing a film.

The first statement is true; the second statement is false.

(1) X-ray photon production occurs as a result of both general and characteristic radiation. (2) General radiation accounts for a small number of x-ray photons produced because it takes high kV to dislodge the electrons from the K shell.

The first statement is true; the second statement is false.

The closer the rotation center is to the teeth, the narrower the focal trough. In most panoramic machines, the focal trough is wide in the anterior region and narrow in the posterior region.

The first statement is true; the second statement is false.

The exposure settings (milliamperage, kilovoltage, and time) are all adjustable on the panoramic machines. Adjustments of milliamperage and kilovoltage are made to change between panoramic and extraoral bite-wing exposures and time is used to accommodate different patient sizes.

The first statement is true; the second statement is false.

Your patient has asked why you prefer digital imaging to film. Which of the following reasons would you tell her?

The image appears almost instantaneously for both of us to view.

Your patient was out in the hot, bright sun yesterday. While in the sun she began experiencing pain and noticed her skin had turned bright red. Shortly after arriving home, she began to experience chills, nausea, severe pain, and blistering. Why would your patient experience the symptoms so quickly?

The latent period was decreased by the increased dose and dose rate. The latent period is shortened or lengthened based on the total dose and rate of radiation. The less radiation received and the slower the dose rate, the longer the latent period. The more radiation received and the faster the dose rate, the shorter the latent period.

Which of the following statements is true of orbits or shells in the atom?

The orbiting shell closest to the nucleus has the highest energy level. Electrons travel around the nucleus in well-defined shells. An atom contains a maximum of seven shells. Each of the maximum seven shells within an atom represents a different energy level. The orbiting shell closest to the nucleus has the highest energy level. The K shell is the orbiting shell closest to the nucleus.

How is the receptor stabilized in the patient's mouth when taking a cross-sectional image?

The patient gently bites on the surface of the receptor.

You are examining your patient's panoramic image. You notice that the molars and premolars on the right side are larger than the teeth on the left side. What patient positioning error did you make?

The patient's head was turned to the left.

Which of the following should appear in a panoramic image that was taken correctly?

The pulp chambers are clear and visible in the anterior teeth.

Your patient is concerned about being exposed to dental x-rays. Which of the following could you tell your patient to alleviate her fears?

The risks from dental imaging are not significantly greater than the risks of other everyday activities in modern life.

Interaction with the x-ray photon as a result of the photoelectric effect is harmful to the patient because ionization occurs.

The statement is true.

Which is the heart of the x-ray generating system?

The x-ray tube

Advantages of the use of digital imaging include which of the following?

There is an opportunity for an increase in interactive dialogue between the patient and the radiographer.

You are using the Rinn BAI System to take a dental image of tooth number 1. What vertical angulation should you set the PID at to get the proper image?

There is no need to set the vertical angulation. The Rinn BAI System has an alignment ring and rod, and the PID is aligned with the ring. You will not set the vertical angulation. The recommended vertical angulation range for mandibular molars when there is no aiming rod or ring is -5 to 0 degrees. The recommended vertical angulation range for maxillary molars when there is no aiming rod or ring is +20 to +30 degrees. The recommended vertical angulation range for maxillary premolars when there is no aiming rod or ring is +30 to +40 degrees.

Your patient is concerned about the amount of radiation she is receiving from the dental x-rays she has been receiving. You will be taking a CBCT scan. Based on evidence-based research, you can share with your patient that the CBCT scan is equal to which of the following?

Three or four full-mouth series of intraoral images

Your x-ray machine runs off 110 volts. Theoretically what would occur if there was no step-down transformer in the x-ray control panel?

Too many electrons would be produced for the purpose of dental x-rays. Only 3-5 volts are required to heat the tungsten filament.

Which occlusal projection is used to examine the palate and the anterior teeth of the maxilla?

Topographic occlusal projection

Film speed is determined by the size of the crystals in the emulsion that coats the film.

True

The panoramic image of your patient has two radiopaque areas, one on each side, in the bottom portion of the image. What do you need to do to correct the error?

Use a lead apron without a thyroid collar.

You need to take a mandibular occlusal image on your 28-year-old patient. Which of the following will you need to do?

Use a size 4 receptor.

Your patients will feel that you are indifferent to them if you do which of the following nonverbal communication actions?.

Use consistent verbal and nonverbal messages.

Under which of the following conditions must you wear your mask and safety glasses?

Whenever spatter and aerosolized sprays of blood and saliva are likely

The x-ray was discovered by

Wilhelm Roentgen Heinrich Geissler built the first vacuum tube in 1838. Wilhelm Roentgen discovered the x-ray on November 8, 1895. Johann Hittorf observed in 1870 that discharges emitted from the negative electrode of a vacuum tube traveled in straight lines, produced heat, and resulted in a greenish fluorescence. William Crookes discovered in the late 1870s that cathode rays were streams of charged particles.

Which of the following forms of electromagnetic radiation are capable of ionization?

X-rays Radio waves are not capable of ionization. Visible light is not capable of ionization. Ultraviolet light is not capable of ionization. Of the forms of electromagnetic radiation listed, only x-rays are capable of ionization.

Which of the following statements is true of wavelength in reference to radiation?

X-rays with longer wavelength have less penetrating power. X-rays with longer wavelength have less penetrating power and x-rays with shorter wavelengths have more penetrating power. X-rays with longer wavelength are more likely to be absorbed by matter. Kilovoltage controls the wavelength and energy of the x-ray beam.

Which of the following is true regarding your usage of disposable medical gloves?

You can use nonsterile gloves for examinations and nonsurgical procedures.

Your patient has no clinical sign of disease; how frequently should you take a CMS on your patient?

You cannot take a CMS A CMS is only appropriate if there is clinical evidence of generalized dental disease or a history of extensive dental treatment.

What is important for you to remember about your protective clothing?

You have to change your protective clothing daily or more frequently if it is visibly soiled.

The images are cleared from the storage phosphor imaging plates by

a clearing step within the scanner. The images are cleared from the storage phosphor imaging plates by the scanner once the images have been scanned. Previously they were exposed to a viewbox light for several minutes.

Photons are

a component of the particle concept of electromagnetic radiation. Photons are bundles of energy without mass or weight; that travel at the speed of light. Photons are a component of the particle concept of electromagnetic radiation.

Radiation is defined as

a form of energy carried by waves or streams of particles. Radiation is a form of energy carried by waves or streams of particles. An x-ray is a beam of energy that has the power to penetrate substances and record image shadows on a receptor. X-radiation is a high-energy radiation produced by the collision of a beam of electrons with a metal target in an x-ray tube. Radiology is a branch of medicine that deals with the use of x-rays.

A radiograph is defined as

a picture on film produced by the passage of x-rays through an object or body. An x-ray is a beam of energy that has the power to penetrate substances and record image shadows on a receptor. A radiograph is a picture on film produced by the passage of x-rays through an object or body. Radiography is the art and science of making dental images by the exposure of a receptor to x-rays. Radiation is a form of energy carried by waves or streams of particles.

The standard of care can be defined as the quality of care that is provided by dental practitioners in _______ locality under _________________ conditions.

a similar; the same or similar

A panoramic image is __________ image(s) taken using __________ technique.

a single; extraoral

Features of the Stabe bite-block include

a slot for receptor retention. An EEZEE-Grip is a double-ended instrument that holds the receptor between two serrated plastic grips that can be locked in place. Features of the Stabe bite-block include that it is disposable and it has a slot for receptor retention. An EEZEE-Grip is a molded-plastic device that can be sterilized.

Good verbal communication skills for dental radiographers involve

a soft tone of voice

Antiseptic is

a substance that inhibits the growth of bacteria.

Bite-wing radiographs are NOT used to detect:

abscessed teeth

Mounted radiographs increase

accessibility for interpretation. Mounted radiographs increase accessibility for interpretation. They decrease the chances of error in determining the patient's right and left sides. They decrease the handling of individual films. They decrease chances of damage to the emulsion.

The CMS is defined as a series of intraoral dental images that shows

all the dentulous or edentulous tooth-bearing areas of the upper and lower jaws. The CMS is defined as a series of intraoral dental images that shows all the dentulous or edentulous tooth-bearing areas of the upper and lower jaws.

A 1 in 1 million risk of a fatal outcome is associated with which of the following activities?

all three of the above activities

The typical stepwedge is constructed of

aluminum.

To avoid a double exposure,

always separate exposed and unexposed film and PSP receptors.

An ion pair results when

an electron is removed from an atom.

Digital imaging uses _________________ to produce an image.

an electronic sensor and computerized imaging system

In regard to increasing density

an increase in either kV or mA will increase density.

A longer position-indicating device (PID) results in

an increased target-receptor distance.

Radiographs are intended to be placed in a film holder in

anatomic order. Radiographs are intended to be placed in a film holder in anatomic order. They are not placed in the film holder in the order in which they were exposed. They are not placed in the film holder in the order in which they were processed. They are not placed in the film holder in the order prescribed by the ADA nomenclature.

On a panoramic image, the articular eminence appears as a rounded radiopaque projection of the bone located _________ to the glenoid fossa.

anterior On a panoramic image, the articular eminence appears as a rounded radiopaque projection of the bone located anterior to the glenoid fossa.

The anterior nasal spine is located at the _____________ portion of the nasal cavity.

anterior and inferior

Interdental nutrient canals are most often seen in the

anterior mandible.

The ALARA concept states that all radiation must be kept

as low as reasonably achievable.

Another term for infection control is __________, which means the absence of pathogens, or disease-causing microorganisms.

asepsis

When should you avoid taking retakes?

at all times

The fundamental unit of matter is the

atom. A proton is a subatomic particle; the fundamental unit of matter is the atom. A neutron is a subatomic particle; the fundamental unit of matter is the atom. An electron is a subatomic particle; the fundamental unit of matter is the atom. The fundamental unit of matter is the atom.

You could be exposed to each of these radiation sources in your daily activities. Which of these sources is human-made?

atomic fallout Radon gas is an example of natural background radiation. Naturally occurring background radiation includes radon gas, cosmic radiation, radioactive potassium, and terrestrial radiation; atomic fallout is a form of artificial radiation. Terrestrial radiation is an example of background radiation. Radioactive potassium is an example of background radiation.

To avoid occupational exposure to x-radiation, the dental radiographer must always (Note: Though all are true, one is the most critical and encompasses the others.)

avoid the primary beam

The primary dictum of operator protection guidelines is that the operator must

avoid the primary beam The operator must stand at least 6 feet away from the x-ray tubehead during x-ray exposure. The primary dictum of operator protection guidelines is that the operator must avoid the primary beam. The operator must never hold a receptor in place for a patient during x-ray exposure. The dental radiographer must never hold the tubehead during x-ray exposure.

What is the preferred method of infection control when using a digital sensor?

barrier

How frequently should you take dental images on your patients?

based on patients needs

If, while treating your patient, your nonverbal messages are consistent with your verbal messages, your patient is more likely to

be apprehensive

Exposed receptors should ________ dried and then placed in a _________________ for transport to the darkroom for processing.

be; disposable container

The Rinn XCP is a

beam alignment device. The Rinn XCP is a beam alignment device. A Styrofoam bite-block is a disposable receptor holder. A snap-on metal collimating device is used to restrict the size of the x-ray beam and limit radiation exposure. A Uni-bite is a type of receptor holder.

The film mount should be labeled _________ the films are mounted. A(n) __________ can be used to label film mounts.

before; special marking pencil The film mount should be labeled before the films are mounted. A special marking pencil can be used to label film mounts. Mounts can be reused, and it is difficult to erase mounts marked with an ink pen.

The tubehead of the panoramic unit always rotates _________ the patient's head as the receptor rotates _________ the patient.

behind; in front of

On a panoramic image, the incisive foramen appears as an almond-shaped radiolucent area located

between the roots of the maxillary central incisors. On a panoramic image, the incisive foramen appears as a small, ovoid or round area located between the roots of the maxillary central incisors. The mental foramen is located near the apex of the mandibular first premolar. The infraorbital foramen is located inferior to the orbit. The orbit is located superior to the maxillary sinuses.

Your patient is edentulous and has very little alveolar ridge remaining. Which technique would you use for a periapical examination on your patient?

bisecting

With the ____________ technique, the vertical angulation is determined by the imaginary bisector; the central ray is directed perpendicular to the imaginary bisector.

bisecting With the bisecting technique, the vertical angulation is determined by the imaginary bisector; the central ray is directed perpendicular to the imaginary bisector.

Which of the following is used for an interproximal evaluation?

bite wing Periapical images are used to evaluate the crowns, roots, and surrounding bone of specific teeth or a tooth. A bite-wing image is used for evaluation of interproximal areas. A lateral jaw image is used to evaluate the posterior region of the mandible. Occlusal images are used to evaluate large areas of the maxilla or mandible.

Your new adult patient has no clinical sign of disease and no restorations. Which of the following images should you take?

bite wings Periapical images are appropriate when a new adult patient presents clinical evidence of localized areas of dental disease or restorations. Bite-wings are appropriate when a new adult patient presents no clinical evidence of generalized dental disease and no history of extensive dental treatment. A CMS is appropriate when a new adult patient presents clinical evidence of generalized dental disease or a history of extensive dental treatment. Occlusal images are appropriate when a new adult patient presents clinical signs of disease, and it is necessary to examine large areas of the maxilla or mandible. Occlusal images are usually used in conjunction with bite-wings and periapicals when the area of concern is larger than the area the periapical receptor can cover.

Radiolucent refers to that portion of a dental image that is

black

Which of the following cells would be the most sensitive to x-rays?

blood

The correct assembly of XCP for an anterior exposure is:

blue

Vertical bite-wings are often used for patients with

bone loss

(1) Many dental professionals who incorporate CBCT into their practices have not had the training required to interpret anatomy beyond the maxilla and mandible. (2) The AAOMR recommends that CBCT and implant imaging be interpreted only by a board certified oral and maxillofacial radiologist or a dentist with adequate training and/or experience.

both are true

(1) Temporomandibular joint tomography is used to evaluate the condyle, articular eminence, and glenoid fossa. (2) Other landmarks are blurred in TMJ tomography.

both are true

(1) There are CBCT machines that have shortened exposure times of 8-10 seconds. (2) This shortened exposure time results in increased patient cooperation and decreased artifacts caused from patient movement.

both are true

(1) Three-dimensional imaging provides a more accurate image than traditional two-dimensional imaging. (2) Locations, distances, sizes, and shapes of pathology and anatomic landmarks, including eruption patterns, are more accurately represented with three-dimensional imaging.

both are true

(1) Until recently, three-dimensional imaging has been used primarily for medical image purposes. (2) Cone-beam computed tomography was developed for use in dentistry to evaluate the oral and maxillofacial areas of the head and neck.

both are true

A grid can be used to decrease scatter radiation, decrease film fog, and increase contrast on film and PSP receptors. A grid should only be used when it is necessary to improve image quality and increase contrast because it requires increased x-ray exposure.

both are true

Extraoral images may be used in conjunction with intraoral images. Extraoral images are not as defined or sharp as intraoral images.

both are true

Radiation monitoring can be used to protect the dental radiographer and includes monitoring of

both equipment and personnel

(1) Overlapped interproximal contacts are caused by improper vertical angulation. (2) To prevent overlap, the vertical angulation should be adjusted to +10 degrees.

both statements are false

When preparing your patient for dental images, you should ask your patient if she gags, because if she does, you need to do some additional preparation prior to taking the images on her.

both statements are false

According to the text, the advantages of the bisecting technique are greater than the disadvantages. Therefore, the bisecting technique should be used instead of the paralleling technique when taking periapical images.

both statements are false According to the text, the disadvantages of the bisecting technique outweigh the advantages. Therefore, the paralleling technique is preferred over the bisecting technique for exposure of periapical receptors and should be used whenever possible.

(1) The zygomatic process appears Y-shaped on images. (2) The zygomatic process appears radiolucent on images.

both statements are false On a panoramic image, the zygomatic process of the maxilla appears as a J- or U-shaped radiopacity.

(1) The American Dental Association (ADA) and the American Academy of Oral and Maxillofacial Radiology both recommend the use of a beam alignment device to reduce the amount of radiation the patient receives. (2) Limiting the size of the x-ray beam not only reduces the amount of skin that is exposed but also results in a significant reduction of radiation to the patient, by as much as 20%.

both statements are false The American Dental Association (ADA) and the American Academy of Oral and Maxillofacial Radiology both recommend the use of a rectangular collimator to reduce the amount of radiation the patient receives. Limiting the size of the x-ray beam not only reduces the amount of skin that is exposed but also results in a significant reduction of radiation to the patient by as much as 70%.

(1) All ionizing radiations cause damage to living tissues. (2) Although very little radiation is used in dentistry, damage to the cells does occur.

both statements are true

(1) Areas of teeth not covered by the lips appear more radiolucent; areas covered by the lips appear more radiopaque. (2) The tongue appears as a faint dome-shaped, radiopaque area superimposed over maxillary posterior teeth.

both statements are true

(1) Contaminated film is placed in a disposable container that is carried to the processor with gloved hands. (2) The film should be developed after the patient has been dismissed from the radiology area.

both statements are true

(1) Highly resistant bacterial and mycotic (fungal) spores are not killed during disinfection procedures; (2) however, highly resistant bacterial and mycotic spores are killed during sterilization.

both statements are true

(1) It is your responsibility to maintain competence in taking dental images; taking continuing education courses is one example. (2) You should always do your best to properly position and expose receptors in a manner that is accurate, time efficient, and comfortable for your patient.

both statements are true

(1) More radiation damage takes place with high dose rates (2) because a rapid delivery of radiation does not allow time for cellular damage to be repaired.

both statements are true

(1) Radiation legislation varies greatly from state to state. (2) For example, in some states a dental radiographer must successfully complete a radiation safety examination before he or she may expose dental x-rays.

both statements are true

(1) The bite-wing tab is a heavy paperboard tab or loop fitted around a periapical film or sensor and used to stabilize the receptor during exposure. (2) The periapical receptor is oriented in the bite loop so that the tab portion extends from the white side (tube side) of the film or sensor.

both statements are true

(1) You can use dental images to help educate your patient on his dental caries and periodontal disease. (2) You can also use dental images to help your patient see a picture of common conditions that cannot be seen clinically. These include cysts, extra teeth, and retained roots.

both statements are true

According to the SLOB rule, when two dental images are compared, the object that lies to the lingual appears to have moved in the same direction as the position-indicating device (PID), and the object that lies to the buccal appears to have moved in the opposite direction as the PID.

both statements are true

An oral examination limits the practitioner to knowledge of what is seen clinically. Dental images allow the practitioner to see many conditions that are not apparent clinically.

both statements are true

Risk estimates suggest (1) that death is more likely to occur from common activities than from dental imaging procedures and (2) that cancer is much more likely to be unrelated to dental imaging radiation exposure.

both statements are true

The trend in dental negligence or malpractice actions has historically been to sue the supervising dentist alone. However, cases exist in which the dentist and the dental auxiliary have both been sued for the actions of the dental auxiliary.

both statements are true

(1) The dental radiographer should be careful not to stimulate the patient's gag reflex. (2) Once the gag reflex is stimulated, the patient may gag on receptors that could normally be tolerated.

both statements are true Anterior receptor placements are less likely to cause the patient to gag. Once the gag reflex is stimulated, the patient may gag on receptors that could normally be tolerated.

The glenoid fossa is a _______________ area.

bowl-shaped, indented concave, depressed area

Damage from ionizing x-radiation to genetic cells:

can affect future generations

The image receptors in a solid-state digital imaging system:

can be wireless or wired with a fiberoptic cable

Which type of bone is composed of bony trabeculae?

cancellous

Which of the following is an example of stochastic effects?

cancer

For the maxillary premolar exposure, the mesial edge of the receptor should be aligned with the midline of the maxillary

canine For the maxillary premolar exposure, the front edge of the receptor should be aligned with the midline of the maxillary canine.

A properly placed premolar bite-wing radiograph shows the distal half of which upper and lower teeth?

canines

The panoramic film is placed in a ____ to protect it from light.

cassette

An "exaggerated smile line" is seen on the dental image if the patient's

chin is tipped down.

A "reverse smile line" is seen on the image if the patient's

chin is tipped up.

An unexposed sensor appears

clear or black.

If a person is blind or visually impaired, the dental radiographer must

communicate using clear verbal explanations.

CMS stands for

complete mouth series

The specialized equipment necessary for three-dimensional imaging that accepts the raw data and converts it to a stack of axial images called DICOM images is called the

computer

The number of gray-scale colors available to be chosen for each pixel in the image is called

contrast resolution

Most digital imaging systems use a ______________ as the x-radiation source.

conventional dental x-ray unit

The purpose of the anode is to

convert electrons into x-ray photons. The purpose of the cathode is to produce electrons when heated. The purpose of the anode is to convert electrons into x-ray photons. The purpose of insulating oil is to absorb heat created by the production of x-rays. The purpose of aluminum discs is to filter out nonpenetrating, longer-wavelength x-rays.

The ______________ is a marked prominence of bone found on the anterior superior ramus of the mandible.

coronoid process The coronoid process is a marked prominence of bone found on the anterior superior ramus of the mandible. The mandibular condyle is a rounded projection of bone extending from the posterior superior border of the ramus of the mandible. The coronoid notch is a scooped-out concavity of bone located distal to the coronoid process of the mandible. The lingula is a small, tongue-shaped projection of bone seen adjacent to the mandibular foramen.

Compact bone is also called __________ bone.

cortical

A plastic bag or _____ is used to carry contaminated films to the processing area.

cup

If the patient's lips are not closed on the bite-block during the exposure of a panoramic image, a _____________ shadow results that obscures the anterior teeth.

dark radiolucent

A rectangular collimator

decreases patient exposure considerably. A rectangular collimator restricts the size of the x-ray beam more than a circular collimator, but not 3 times. A rectangular collimator restricts the beam more than a circular collimator. A rectangular collimator significantly reduces patient exposure. A rectangular collimator is slightly larger than a size 2 intraoral receptor.

The patient's first impression of the dental team most often involves the

dental auxillary

Film fog occurs when the:

dental film is stored in a room where radiographic procedures are performed

Decisions about the number, type, and frequency of dental images are determined by the _____________ based on the patient's individual needs.

dentist

Which one of the following is the only member of the dental team who is legally allowed to interpret and diagnose radiographs?

dentist

Which party owns the dental radiographs?

dentist

The "Guidelines for Prescribing Dental Radiographs" state that

dentulous adult recall patients who are not at increased risk for caries should have posterior bite-wing examinations at 24- to 36-month intervals. Dentulous adult recall patients at increased risk for caries should have posterior bite-wing examinations at 6- to 18-month intervals. The recommendations for prescribing radiographs do not need to be altered for pregnancy. Edentulous adults do not need bite-wing radiographs. The "Guidelines for Prescribing Dental Radiographs" state that dentulous adult recall patients who are not at increased risk for caries should have posterior bite-wing examinations at 24- to 36-month intervals.

According to the text, __________ is one of the most important uses of dental images.

detection

Dental radiographs are NOT used for:

detection of soft tissue trauma

Dental imaging:

detects conditions that might otherwise remain undetected

The binding energy or binding force of an electron is

determined by the distance between the orbiting electrons and the nucleus. The binding energy or binding force of an electron is determined by the distance between the nucleus and the orbiting electron. The binding energy or binding force of an electron is determined by the distance between the orbiting electron and the nucleus, not the distance between the orbiting electrons. The binding energy or binding force of an electron is stronger for electrons located in inner shells than for outer shells.

An increase in ___________ temperature will result in a film with increased contrast.

development

With the feature of _______________, the gray-scale of the diagnostic image is reversed so that radiolucent images appear white and radiopaque images appear black.

digital subtraction

The primary disadvantage of the bisecting technique when contrasted with the paralleling technique is

dimensional distortion.

A sensor with a fiber optic cable linked to the computer is placed into the mouth of the patient and exposed to x-radiation. This is an example of

direct digital imaging. A reusable imaging plate coated with phosphors is used instead of a sensor with a fiber optic cable. In the scanning method, an existing radiograph is digitized using a CCD camera. The essential components of a direct digital imaging system include an x-ray machine, an intraoral sensor, and computer monitor. A sensor with a fiber optic cable linked to the computer is placed into the mouth of the patient and exposed to x-radiation. Indirect digital imaging includes scanning traditional radiographs and storing phosphor imaging.

To avoid overlapped contacts on a periapical image,

direct the x-ray beam through the interproximal regions.

The process of informing the patient about the particulars of exposing dental images is termed

disclosure

When determining vertical angulation, if the position-indicating device (PID) is positioned above the occlusal plane and the central ray is directed _______, the vertical angulation is termed _________.

downward; positive

When the occlusal plane appears tipped or tilted, the error is a(n)

dropped receptor corner.

Assigned responsibilities of dental auxiliaries in regard to dental imaging may include

education of patients about dental imaging.

When the kilovoltage is increased

electrons move from the cathode to the anode with more speed. Electrons move from the cathode to the anode. When the voltage is increased, electrons move from the cathode to the anode with more speed, striking the target with greater energy and force.

The rotational change in a panoramic machine allows the image layer to conform to the ___________ shape of the dental arches.

elliptical

Inviting a patient to ask questions

enhances communication

The lateral walls of the nasal cavity are formed by the __________ bone and the maxillae.

ethmoid

Informed consent for radiographic exposure includes:

explaining the risks and benefits of dental radiographs

On some dental x-ray machines, only the ____________ can be altered; the other parameters are preset by the manufacturer.

exposure time On some dental x-ray machines, only the exposure time can be altered; the kilovoltage is preset by the manufacturer; the other parameters are preset by the manufacturer; the PID length is determined by the manufacturer; the milliamperage is preset by the manufacturer.

The _____________ allow(s) for positioning of the tubehead.

extension arm The control devices regulate the x-ray beam. The extension arm allows for positioning of the tubehead. The control panel allows the dental radiographer to regulate the x-ray beam. The exposure button activates the machine to produce x-rays.

When viewing radiographs, it is easier to detect subtle changes in density and contrast if

extraneous light is eliminated. When viewing radiographs, it is easier to detect subtle changes in density and contrast if extraneous light is eliminated. Treatment room lights are a source of extraneous light. Backlighting, as from the viewbox, is preferred. Viewing films through ceiling lights is discouraged.

An intraoral film is composed of a black paper wrapper.

false

An operator will know when the master switch is on because a black indicator light will also be on.

false

If the tubehead drifts, the extension arm should be held by the assistant while the dentist exposes the x-ray.

false

In developing films in digital radiography, the solution temperatures are an important factor.

false

Leakage radiation occurs when an x-ray is deflected from its path during impact with the patient.

false

One of the disadvantages of using digital radiographs is the slow speed at which the image is recorded on the computer.

false

The aluminum filter restricts the size of the x-ray beam and reduces patient exposure.

false

The dental assistant can hold the film for a patient who is in a wheelchair or who is disabled, during a radiographic exposure.

false

The four factors that affect radiograph quality are contrast, time, film speed, and detail.

false

The function of the focusing cup is to aim the x-ray beam at the film in the patient's mouth and thereby minimize the amount of radiation to the patient's face.

false

The image on a radiograph appears in a range from black to white with multiple shades of gray in between. The differences between the shades of gray are referred to as density.

false

The length of the PID determines the source-film distance. A shorter PID reduces distortion due to magnification.

false

The longer the duplicating film is exposed to light, the darker the film will become.

false

The maximum permissible dose (MPD) is the amount of radiation that a patient may receive in 1 year.

false

The point of entry refers to the placement of the film packet in relation to the film holder.

false

The position indicator device (PID) is lined with aluminum to absorb excess radiation.

false

The sensor used in digital radiography must be sterilized in the autoclave after each use.

false

When dental images are properly prescribed, exposed, and processed, the benefit of disease detection ____________ the risk of small doses of x-radiation.

far outweighs

Patient education is likely to result in decreased

fears of x-ray exposure.

The Consumer-Patient Radiation Health and Safety Act is a ________ law.

federal

With ____________, images appear stretched and distorted.

film bending

A thin radiolucent line appears on the film with

film creasing

Preparation of supplies and equipment involves sterilizing which of the following items?

film holding devices

The superior foramina of the incisive canal are located on the __________ of the nasal cavity.

floor

In panoramic imaging, the ___________ is a theoretical concept used to determine where the dental arches must be positioned to achieve the clearest image.

focal trough

Which of the following should you do to prepare your treatment room prior to taking a dental image?

follow infection control procedures

How many bite-wing films are usually taken for an adult patient?

four

According to the inverse square law, if the length of the PID is halved, the resultant beam is ___________ as intense.

four times

The lingual foramen is in the center of the

genial tubercles. The mental foramen is an opening or hole in bone located on the external surface of the mandible in the region of mandibular premolars. The lingual foramen is surrounded by the genial tubercles. The anterior nasal spine is a sharp projection of the maxilla located at the anterior and inferior portion of the nasal cavity. The external oblique ridge is a linear prominence of bone located on the external surface of the body of the mandible.

Which of the following is the best way to show your patient that you are listening to him or her?

give the patient undivided attention

When handling film with barrier envelopes, the barrier envelopes are opened with __________ hands and the films unwrapped with ______________ hands.

gloved;nongloved

Your patient has a shallow palate; you should modify your technique when there is a lack of parallelism ________________.

greater than 20 degrees

Green-sensitive film must be paired with intensifying screens that produce ________ light.

green

Rare earth screens emit _______ light and are considered faster than calcium tungstate screens, which emit _______ light.

green; blue

Which of the following would you evaluate using an extraoral image?

growth and development

Which of the following is a sign or symptom of acute radiation syndrome (ARS)?

hair loss Genetic defects are considered a long-term effect of radiation exposure. Birth abnormalities are considered a long-term effect of radiation exposure. Hair loss is considered a short-term effect of radiation exposure and is a symptom of acute radiation syndrome (ARS). Cancer is considered a long-term effect of radiation exposure.

According to the text, the identification dot on the film in bite-wing placement

has no significance

The primary factor that limits the size of the tungsten target is

heat production.

When lower kilovoltage settings are used, an image with ____ will result.

high contrast When low kilovoltage settings are used, an image with high contrast will result; an image with few shades of gray will result (high contrast).

The teeth on your patient's images appear very radiopaque and the periodontium and tissue appear very radiolucent. Your patient's dental image has

high contrast.

A ghost image appears ___________ than/of its actual counterpart.

higher

A stepwedge will reveal that images taken at a lower kV will have __________ than images taken at a higher kV.

higher contrast

When kilovolt is increased, a

higher energy x-ray beam with increased penetrating ability results.

The most critical error on bite-wing radiographs is caused by incorrect BLANK angulation.

horizontal

The buccal object rule depends on a ________ image shift when trying to locate vertically aligned images. With the buccal object rule, an object to the buccal of the reference object will move in the ________ direction as the shift.

horizontal; opposite

In panoramic imaging, the x-ray tube rotates around the patient's head in one direction while the receptor rotates __________________ direction.

horizontally in the opposite

When in storage, the lead apron should be:

hung

With digital imaging, the term ___________ is used to describe the pictures that are produced.

image

When the bisecting technique is used, the central ray is directed at 90 degrees to the

imaginary bisector. When the bisecting technique is used, the central ray is directed at 90 degrees to the imaginary bisector.

Your radiographs have just exited the processor. When should you mount them?

immediately The dental radiographer should always mount films immediately after processing. The longer the period between processing and mounting, the greater the risk is of loss or damage to the films.

Exposure time is measured in

impulses. kV is a measure of voltage. Milliamperage is a measure of the number of electrons flowing through the cathode filament. Density is a measure of the darkness of the film. Exposure time is measured in impulses; one impulse occurs every 1/60 of a second on older machines and every 1/100 of a second on newer machines.

In dental radiography, film mounting is the placement of radiographs

in a supporting structure or holder. In dental radiography, film mounting is the placement of radiographs in a supporting structure or holder. They are examined on a viewbox. They are placed in the patient's mouth for exposure. They are placed in the processor for processing.

When using film, the dot should always be placed ________ in relation to the bite-block.

in the slot

Electromagnetic radiations

include x-rays and visible light. Electromagnetic radiations are human-made or occur naturally. Electromagnetic radiations include x-rays and visible light. Electromagnetic radiations are not a form of particulate radiation. Electromagnetic radiations do not have mass.

Inherent filtration in the dental x-ray tubehead

includes filtration that takes place when the primary beam passes through the glass window of the x-ray tube, the insulating oil, and the tubehead seal. Inherent filtration in the dental x-ray tubehead includes filtration that takes place when the primary beam passes through the glass window of the x-ray tube, the insulating oil, and the tubehead seal. Added filtration includes the placement of aluminum discs in the path of the x-ray beam between the collimator and the tubehead seal. Inherent filtration alone does not meet the standards regulated by state and federal law. Inherent filtration is equivalent to approximately 0.5 to 1.0 mm of aluminum.

When overlapped contacts appear on a dental image, the cause is

incorrect horizontal angulation.

To correct an elongated image on a radiograph, the vertical angulation needs to be:

increased

To compensate for the strips found in the grid, _______________ must be used to expose a film or PSP receptor.

increased exposure time

If the operating kilovoltage is increased, the receptor density ____ because the average energy of the x-rays is raised.

increases

Scatter radiation

increases film fog.

If the milliamperage is increased, the receptor density ________, and the image appears _________.

increases; darker

Only the __________ border of the orbit is visible on most panoramic images.

inferior

The anterior nasal spine is a pointed, bony protrusion of the maxilla situated ____________ the nasal fossa.

infront of and below The anterior nasal spine is a sharp bony projection of the maxilla located at the anterior and inferior portion of the nasal cavity.

Your patient is receiving radiation treatments for breast cancer. She reports having a burning sore throat and great difficulty swallowing. Which stage of the radiation injury sequence is your patient in?

injury Signs and symptoms of radiation exposure occur during the injury period. Repair of damaged tissues occurs during the recovery period. The latency period occurs between the radiation exposure and the onset of clinical signs. The unrepaired damage that accumulates as a result of repeated radiation exposure is known as cumulative effects.

An underexposed receptor results from

insufficient exposure time.

Panoramic screen film is exposed by

intensifying screens in a cassette holder.

According to the inverse square law, the intensity of radiation is __________ proportional to the ______________ from the source of radiation.

inversely; square of the distance

The gag reflex is a(n) ___________ effort, preceded by ____________ of respiration.

involuntary; cessation

The vertical angulation in the tubehead of the panoramic unit

is fixed in position so that the x-ray beam is directed slightly upward.

the thyroid collar

is recommended for all intraoral exposures. A thyroid collar is recommended for all intraoral exposures. The thyroid collar is not recommended for extraoral exposures. The lead apron is placed over the patient's chest and lap; the thyroid collar, if attached, extends to protect the thyroid. The lead apron with the thyroid collar is recommended for both intraoral and extraoral exposures. The lead apron without the thyroid collar is used for extraoral exposures.

The lead apron

is recommended for intraoral exposures. The lead apron is recommended for intraoral exposures (and extraoral films as well). The lead apron is recommended for extraoral exposures. The lead apron is not an option; many state laws mandate the use of a lead apron on all patients. The thyroid collar is used to protect the thyroid gland.

An image with "low" contrast

is useful for the detection of periodontal or periapical disease and has many shades of gray. An image with low contrast has many shades of gray and is useful for the detection of periodontal or periapical disease. An image with high contrast has many black and white areas and is useful for the detection and progression of dental caries. An image with low contrast is useful for the detection of periodontal or periapical disease, but it has many shades of gray.

The lateral jaw projection

is valuable for patients with limited jaw opening because of a fracture or swelling.

A film badge

is worn at waist level by the operator. A film badge is worn at waist level by the operator, not the patient. A film badge is worn close to the critical reproductive organs at waist level by the operator. A film badge is worn at waist level by the operator, not clipped to the shirt pocket of the patient.

Mandibular canal

label A

Condyle

label C

Orbit

label D

Nasal conchea

label E

Coronoid process

label F

Hard palate

label G

Zygomatic arch

label H

Mental foramen

label J

External auditory meatus

label b

Radiation is stopped and may not reach the receptor when it interacts with an area of high attenuation such as

large amalgam restorations.

The occlusal technique is used to examine

large areas of the upper or lower jaw.

The _________ the trabeculations, the _______ radiolucent the area of cancellous bone appears.

larger; more

The left side of the patient's head is positioned adjacent to the cassette for the _____________ projection.

lateral cephalometric

Which of the following is an extraoral image?

lateral jaw A periapical images is an intraoral images. A bitewing is an intraoral image. A lateral jaw is an extraoral image. An occlusal is an intraoral image.

The pterygomaxillary fissure is a narrow space or cleft that separates the ________ and the maxilla.

lateral pterygoid plate

When contrasted with the use of 70 kV for dental x-rays, the use of 60 kV produces

less penetrating dental x-rays with longer wavelength.

The alveolar crest in the posterior region tends to appear ______ dense and ______ radiopaque than the alveolar crest seen in the anterior region.

less; less

According to the dose-response curve, when dose and damage are plotted on a graph, a _____________________ relationship is seen.

linear, nonthreshold

When the bisecting technique is used, the receptor must be placed along the ________ surface of the tooth.

lingual When the bisecting technique is used, the receptor must be placed along the lingual surface of the tooth.

The ________ foramen is a tiny hole or opening in bone located on the internal surface of the mandible near the midline.

lingual The lingual foramen is a tiny hole or opening in bone located on the internal surface of the mandible near the midline. The mental foramen is a hole or opening in bone located on the external surface of the mandible in the region of the mandibular premolars. The incisive foramen (nasopalatine foramen) is a hole or opening in bone located at the midline of the anterior portion of the hard palate directly posterior to the maxillary central incisors. The mandibular foramen is a round or ovoid hole in bone on the lingual aspect of the ramus of the mandible.

With the lingual mounting method, films are viewed from the ________ aspect. The lingual method _______ recommended.

lingual; is not

The bombing at Nagasaki and Hiroshima took place in 1945; an increase in the incidence of cancer was noted in 1956. Which effects apply to the cancer incidence?

long term, somatic

A stepwedge will reveal that images taken at a higher kV will have _____________ versus images taken at a lower kV.

long-scale contrast

Aluminum filters are used to remove _______-energy, ________ wavelength x-rays.

low; longer

The geometric characteristic of _____________ refers to an image that appears larger than the actual size of the object it represents.

magnification

To prevent a dropped receptor corner,

make certain the edge of the receptor is placed parallel to the incisal-occlusal surfaces of the teeth.

Your left premolar bite-wing image is lighter than the rest of the images and has a herringbone pattern. What can you do to prevent this problem from occurring? When the film is reversed,

make sure the film side is facing the PID.

If you take dental images on your patient before getting his informed consent, your patient can legally claim

malpractice or negligence

The conduit that extends from just below the ramus to the premolar region of the mandible is the

mandibular canal The external oblique ridge is a linear prominence of bone located on the external surface of the body of the mandible. The mylohyoid ridge is a linear prominence of bone extending from the molar region downward on the internal surface of the mandible. The submandibular fossa is a scooped-out, depressed area of bone located on the internal surface of the mandible inferior to the mylohyoid ridge. The mandibular canal is a tubelike passageway through bone that travels the length of the mandible.

The _____________ articulates with the glenoid fossa.

mandibular condyle The mandibular condyle rests in the glenoid fossa. The styloid process extends down from the inferior surface of the temporal bone. The mastoid process is part of the temporal bone. The coronoid process extends from the anterior portion of the mandible.

According to your text, when viewing radiographs in sequential order, the third step in viewing radiographs should begin with the

mandibular left side. When viewing radiographs, the mandibular left side is viewed in the third step. The third step reads "move down to the mandibular teeth on the left side (mandibular periapical films on the lower right side of the mount)". The mandibular right side is viewed in the fourth step. Step four reads "move horizontally across to the maxillary teeth on the left (maxillary periapical films on the upper right side of the mount)". The maxillary left is viewed in the second step. Step two reads "move horizontally across to the maxillary teeth on the left (maxillary periapical films on the upper right side of the mount)." The right molar bite-wings are viewed in the first step. The first step reads "begin with the maxillary teeth on the right side (maxillary periapical films on the upper left side of the film mount)."

According to the recommended posterior periapical exposure sequence for the bisecting technique, the second posterior quadrant exposed should be the

mandibular right quadrant. According to the recommended posterior periapical exposure sequence for the bisecting technique, the second posterior quadrant exposed should be the mandibular right quadrant.

The external oblique ridge typically ends in the _____________ molar region.

mandibular third

Dental images enable the dental professional to see ___________ conditions that may otherwise go undetected.

many

An opaque film mount is preferred because it

masks the light around each radiograph.

The lingual cusp of the first premolar usually obscures the distal contact of the canine on the ________________ exposure.

maxillary canine The lingual cusp of the first premolar usually obscures the distal contact of the canine on the maxillary canine exposure.

Which of the following images must include the crowns, roots, and surrounding bone of the right or left central and lateral incisors?

maxillary incisor The entire crowns and roots of one lateral and one central incisor, including the apices of the teeth and surrounding structures, must be seen on the maxillary incisor image.

Which receptor placement is most likely to elicit the gag reflex?

maxillary molar

Which of the following images must include the crowns, roots, and surrounding bone, sinus and tuberosity region of the first, second, and third molars?

maxillary molar All crowns and roots of the first, second, and third molars, including the apices, alveolar crests, contact areas, surrounding bone, and tuberosity region, must be seen on the maxillary molar image.

On a periapical image, the maxillary sinuses appear as radiolucencies located superior to the apices of the

maxillary molars and premolars. On a posterior maxillary periapical image, the maxillary sinus appears as a radiolucent area located superior to the apices of the maxillary premolars and molars.

Your 17-year-old patient has tooth number 6 impacted. Which of the following would you take to evaluate the tooth?

maxillary occlusal

The recommended anterior periapical exposure sequence for the bisecting technique starts with the

maxillary right canine.

The recommended posterior periapical exposure sequence for the bisecting technique is to begin with the

maxillary right quadrant

Upper cuspid/premolar exposure

maxillary sinus

On a panoramic image, the infraorbital foramen may be superimposed over the ____________.

maxillary sinus On a panoramic image, the infraorbital foramen may be superimposed over the maxillary sinus. The infraorbital foramen is a hole or opening in bone found inferior to the border of the orbit. The mental foramen is a hole or opening in bone located on the external surface of the mandible in the region of the mandibular premolars; thus the infraorbital foramen would not be superimposed over the mental foramen on a panoramic image. The frontal sinus is superior to the orbit; thus the infraorbital foramen would not be superimposed over the frontal sinus on a panoramic image. The external auditory meatus is a hole or opening in the temporal bone located superior and anterior to the mastoid process; thus the infraorbital foramen would not be superimposed over the external auditory meatus on a panoramic image.

This bilateral landmark is located above the apices of the maxillary premolars and molars and appears radiolucent on the panoramic image.

maxillary sinus The maxillary sinuses appear as paired radiolucent areas located superior to the apices of maxillary premolars and molars. The floor of the maxillary sinus is composed of dense cortical bone and appears as a radiopaque line. The maxilla forms the floor of the orbit of the eyes, the sides and floor of the nasal cavity, and the hard palate. The incisive foramen is a hole or opening in bone located at the midline of the anterior portion of the hard palate. The infraorbital foramen is a hole or opening in bone located inferior to the border of the orbit.

Bony septa and nutrient canals may be seen within the walls of the

maxillary sinus.

On a _________ periapical image, the nasal fossa appears as a large ______________ area located above the roots of the maxillary incisors.

maxillary; radiolucent

An occlusal receptor ________ be used for some extraoral images. When used extraorally, it covers a ________ area than a screen film.

may;smaller

The hamulus extends from the

medial pterygoid plate of the sphenoid bone.

On a maxillary periapical image, the nasal septum may be superimposed over the

median palatal suture.

Upper anterior exposure

median palatine suture

Lower premolar exposure

mental foramen

Which of the following structures may be seen on both periapical and panoramic images?

mental foramen The mental foramen may be seen on both periapical and panoramic images. The mandibular condyle is not seen on periapical images. The coronoid notch is not seen on periapical images. The mandibular foramen is not seen on periapical images.

The __________ is a hole or opening in bone located on the external surface of the mandible in the region of the mandibular premolars.

mental foramen The mental foramen is a hole or opening in bone located on the external surface of the mandible in the region of the mandibular premolars. The mandibular foramen is a round or ovoid hole in bone on the lingual aspect of the ramus of the mandible. The lingula is a small, tongue-shaped projection of bone seen adjacent to the mandibular foramen on the lingual surface of the mandible. The mandibular canal is a tubelike passageway through bone that travels the length of the mandible.

Pathogens are

microorganisms capable of causing disease.

The quantity of the x-rays produced is controlled by

milliamperage.

In the dental x-ray tube, the number of electrons created is controlled by

milliamperage. Alternating current describes a current in which the electrons flow in two opposite directions. Direct current describes a current in which the electrons flow in one direction through a conductor. Milliamperage in the dental x-ray tube controls the number of electrons created that will move through a conductor. Kilovoltage in the dental x-ray tube controls the electrical force or speed that moves electrons from a negative pole (cathode) to a positive one (anode).

Radiographic density is controlled by the:

milliamperes (mA) setting

Commercially available barrier envelopes

minimize contamination after exposure of the film.

A patient with caries will require

more frequent dental imaging examinations than a patient without such disease.

A patient who is knowledgeable about the importance of dental images is

more likely to accept prescribed treatment.

When a patient trusts the dental professional, the patient is

more likely to comply with prescribed treatment.

Parallel is defined as

moving or lying in the same plane, always separated by the same distance and not intersecting.

When viewed together, the axial, coronal, and sagittal images are referred to as

multiplanar reconstructed images.

The reconstruction of raw data into images when imported into viewing software to create three anatomic planes of the body is called

multiplanar reconstruction.

Informed consent

must be in language that the patient can readily understand.

If the patient is a minor, informed consent

must be obtained from a legal guardian.

A lead apron and a thyroid collar:

must be used on all patients for all intraoral exposures

The collimator used in panoramic imaging has an opening in the shape of a _____________ slit.

narrow vertical

The inverted Y refers to the intersection of the maxillary sinus and the

nasal cavity

The nasal cavity is also known as the

nasal fossa

On a panoramic image, the ____________ air space appears as a diagonal radiolucency located superior to the radiopaque shadow of the soft palate and uvula.

nasopharyngeal On a panoramic image, the nasopharyngeal air space appears as a diagonal radiolucency located superior to the radiopaque shadow of the soft palate and uvula. The palatoglossal air space is found between the palate and the tongue and appears as a horizontal, radiolucent band located above the apices of the maxillary teeth. The glossopharyngeal air space is the portion of the pharynx located posterior to the tongue and oral cavity and appears as a vertical, radiolucent band superimposed over the ramus of the mandible.

Dental images are a(n) _______________ comprehensive patient care.

necessary component of

Your next patient is a 35-year-old man who you have been seeing for the past 10 years. The only treatment he has needed since coming to the dental practice has been his 6-month "prophys." He has no periodontal issues and is on a 6-month recall cycle. You last took four bite-wing images 1 year ago. Which of the following should you do?

no images will be needed for 5 years Based on the "Guidelines for Prescribing Dental Radiographs", adult recall patients at risk of decay should have bite-wing examinations every 12-18 months. Only if there were previous incidences of decay would dental images be warranted on a yearly basis. Based on the previous incidence of decay, dental images on a yearly interval would be warranted. Based on these guidelines, dental images will not need to be taken for 1-2 years. Based on the "Guidelines for Prescribing Dental Radiographs", adult recall patients with little risk of decay should have bite-wing examinations every 24-36 months.

When handling film with barrier envelopes, the films are unwrapped with _________ hands, and when handling film without barrier envelopes, the films are unwrapped with _____________ hands.

nongloved; gloved

Your patient is 6 months pregnant. According to the "Guidelines for Prescribing Dental Radiographs," you should

not alter treatment; take needed images.

The possibility of exposure of radiographic film to white light can be reduced by

not unwrapping the film in a room with white light.

The exposure of dental radiographs should be documented in the chart to include the:

number and type of radiographs exposed

Image magnification occurs when the ______________ distance is increased.

object receptor

To achieve parallelism between the receptor and the tooth, the ____________ distance must be increased to keep the receptor parallel with the long axis of the tooth.

object-receptor To achieve parallelism between the receptor and the tooth, the object-receptor distance must be increased to keep the receptor parallel with the long axis of the tooth.

Identify the major technique error on your patient's bitewing.

occlusal plane not centered

Stochastic biologic effects from radiation

occur as a result of exposure, but severity is not determined by dose.

You have been using a dental x-ray machine that has a 4-inch PID. Your new machine has an 8-inch PID. Given that all exposure factors remain the same, according to the inverse square law, the resultant beam would be ___________ as intense.

one quarter

For a periapical examination in an edentulous patient, the receptor should be positioned so that approximately ____________ of it extends beyond the edentulous ridge.

one third

Preparation of the dental radiographer should include

optional use of a surgical mask and protective eyewear.

An extraoral image is placed __________ the mouth during x-ray exposure. Extraoral imaging is used to image _________ areas of the skull or jaws.

outside;large

Incorrect horizontal angulation of the PID results in:

overlapped contact areas

The problem with a single bite-wing receptor per side for adult patients is increased

overlapped contacts.

The median palatal suture is located between the two __________ of the maxilla.

palatine processes

You have been asked to take a single image on your patient to evaluate his maxilla and the mandible. Which of the following should you take?

panoramic The panoramic image allows the dental professional to view the largest area of the mandible and maxilla on a single image. Bite-wing images do not permit visualization of the apical area. An 18-image periapical series does not permit visualization of the entire maxilla and mandible. A 21-image periapical series does not permit visualization of the entire maxilla and mandible.

To minimize dimensional distortion, the object and receptor must be _____________ one another.

parallel to

According to the basic principles of the paralleling technique, the receptor is placed in the mouth _________ to the long axis of the tooth being x-rayed, and the central ray of the x-ray beam is directed ____________ to the receptor and long axis of the tooth.

parallel; perpendicular

The grid is placed between the ____________ and the ______________.

patient's head; film or PSP receptors

It is desirable that radiographs be identified with each of the following pieces of information, but it is critical that they be labeled with the

patient's name and date of exposure. It is desirable that radiographs be identified with each of the following pieces of information, but it is critical that they are labeled with the patient's name and date of exposure. Any person who has worked in a dental office knows the frustration of trying to identify a loose film that has popped out of the film mount and is found on the counter or floor. Although the number of films can be counted, and the dentist's and radiographer's names can usually be determined from memory or work schedules, the films are useless if the patient's name and the date of exposure cannot be determined.

The mental foramen is frequently misdiagnosed as a _____________ because of its apical location.

periapical granuloma

According to the basic rules of paralleling, the central ray should be directed ______________ to the receptor and the long axis of the tooth.

perpendicular Vertical angulation, the third basic rule of paralleling states that the central ray of the x-ray beam must be directed perpendicular (at a right angle) to the receptor and the long axis of the tooth. Receptor position, the second basic rule of paralleling states that the receptor must be positioned parallel to the long axis of the tooth. Horizontal angulation, the fourth basic rule of paralleling indicates the central ray of the x-ray beam must be directed through the contact areas between teeth.

Recommendations concerning gloves would fall under which of the following categories of infection control practices that directly relate to dental imaging procedures?

personal protective equipment

The appearance of a patient's finger on the image is called a

phalangioma

Digital sensors contain distinct units of programmable gray values that are sensitive to x-rays called

pixels

When the bisecting technique is used, foreshortening will occur if the central ray is directed perpendicular to the

plane of the receptor. When the bisecting technique is used, foreshortening will occur if the central ray is directed perpendicular to the plane of the receptor.

The front side of the cassette is typically constructed of ________ and permits the passage of the x-ray beam, whereas the back side is made of _________ to reduce scatter radiation.

plastic;metal

When the distal surfaces of the canines are not visible on a premolar bite-wing image, the solution is to

position the anterior edge of the receptor at the midline of the mandibular canine.

When the third molar regions are not visible on a molar bite-wing image, the solution is to

position the anterior edge of the receptor at the midline of the mandibular second premolar.

The mastoid process is a marked prominence of bone located ____________ to the temporomandibular joint (TMJ).

posterior and inferior

For the _____________ projection, the patient's face is against the receptor with both the forehead and chin touching the receptor.

posteroanterior

Which radiation produces diagnostically useful radiographs?

primary

The nucleus of an atom contains

protons and neutrons.

Covering exposed surfaces with disposable materials ____________ adequate protection ____________ the need for surface cleaning and disinfection between patients.

provides; while eliminating

Which of the following tooth structures is most radiolucent?

pulp

In dental radiography, the term ________ is used to describe the mean energy or penetrating ability of the x-ray beam.

quality

Milliamperage regulates the _________ of electrons produced at the cathode filament.

quantity Voltage regulates the quality (speed or power) of electrons produced at the cathode filament. Milliamperage regulates the quantity of electrons produced at the cathode filament.

A nonthreshold dose-response curve suggests that

radiation exposure, no matter how small, causes damage to living tissue.

The spontaneous emission of radiation from the disintegration of unstable atomic nuclei is

radioactivity. Beta particles are fast-moving electrons emitted from the nucleus of radioactive atoms. Radioactivity is the process by which certain unstable atoms or elements undergo spontaneous disintegration, or decay, in an effort to attain a more balanced nuclear state. Radiation is the emission and propagation of energy through space or a substance in the form of waves or particles. Radioactivity is the process by which certain unstable atoms or elements undergo spontaneous disintegration, or decay, in an effort to attain a more balanced nuclear state. Alpha particles are emitted from the nuclei of heavy metals and exist as two protons and neutrons, without electrons. Radioactivity is the process by which certain unstable atoms or elements undergo spontaneous disintegration, or decay, in an effort to attain a more balanced nuclear state.

On a periapical image, the median palatal suture appears as a thin __________ line between the _________________.

radiolucent; maxillary central incisors

On a dental image, the lateral fossa appears as a __________ area of ____________ appearance, depending on the anatomy of the individual.

radiolucent; variable

On a periapical image, the genial tubercles appear as a ring-shaped __________ the apices of the mandibular incisors.

radiopacity below On a periapical image, the genial tubercles appear as a ring-shaped radiopacity below the apices of the mandibular incisors.

On a maxillary periapical image, the zygomatic process appears as a __________ to the maxillary first molar region.

radiopacity located superior On a maxillary periapical image, the zygomatic process appears as a radiopacity located superior to the maxillary first molar region.

The mastoid process is a sizable curved __________ that ______ seen on periapical images.

radiopacity; is not

On a mandibular molar periapical image, the external oblique ridge appears as a _______________ band extending _______________________ from the anterior border of the ramus of the mandible.

radiopaque: downward and forward

The inverted Y is a __________ line above the maxillary _________.

radiopaque; canine

The maxillary tuberosity appears as a ___________ rounded prominence posterior to the ________ molar region.

radiopaque; third

In the labial mounting method, radiographs are placed in the film mount with the __________ side of the identification dot facing the viewer. They are then viewed from the _________ aspect.

raised; labial In the labial mounting method, radiographs are placed in the film mount with the raised side of the identification dot facing the viewer. They are then viewed from the labial aspect.

Your patient is looking at her dental images and is pointing to the bilateral vertical section of the mandible. What is she pointing to?

ramus The ramus is the vertical portion of the mandible that is found posterior to the third molar. The coronoid process is a marked prominence of bone on the anterior ramus of the mandible. The body of the mandible is the horizontal, U-shaped portion that extends from ramus to ramus. The alveolar process is the portion of the mandible that encases and supports the teeth.

The image produced on the receptor following exposure to the x-ray beam is

raw data

A _____________ eliminates the need for the patient to stabilize the receptor.

receptor holder The position-indicating device shapes and restricts the size of the x-ray beam. A receptor holder eliminates the need for the patient to stabilize the receptor. The control panel allows the dental radiographer to regulate the x-ray beam, is plugged into an electrical outlet, and appears as a console or cabinet. A beam alignment device is used to help the dental radiographer position the PID in relation to the tooth and the receptor.

Which of the following are considered to be semicritical instruments?

receptor holding devices

Which basic rule of paralleling states that the receptor must be parallel to the long axis of the tooth?

receptor position Receptor placement, the first basic rule of paralleling, indicates the receptor must be positioned to cover the area of teeth to be examined. Receptor position, the second basic rule of paralleling, indicates the receptor must be positioned parallel to the long axis of the tooth. Vertical angulation, the third basic rule of paralleling, indicates the central ray of the x-ray beam must be directed perpendicular (at a right angle) to the receptor and the long axis of the tooth. Receptor exposure, the fifth basic rule of paralleling, indicates the x-ray beam must be centered on the receptor to ensure that all areas are exposed.

Aluminum filters

reduce the intensity of the x-ray beam.

The primary benefit of using a collimator on a Rinn BAI instrument with the bisecting technique is

reducing the patient's exposure to radiation.

Sensors that cannot be sterilized

require complete coverage with disposable plastic sleeves for each patient.

The function of the collimator used in the panoramic x-ray machine is to ____________________.

restrict the size and shape of the x-ray beam.

The lead collimator:

restricts the size and shape of the primary beam

The collimator ____________

restricts the size and shape of the x-ray beam. The collimator may have either a round or a rectangular opening. The collimator restricts the size and shape of the x-ray beam. The collimator is a lead plate; the filter is aluminum. The collimator is fitted directly over the opening of the machine housing where the x-ray beam exits the tubehead.

The lead collimator

restricts the size of the x-ray beam.

Added filtration in the dental x-ray tubehead

results in a more penetrating useful beam. Refers to the placement of aluminum discs in the path of the x-ray beam between the collimator and the tubehead seal. Filters out longer wavelength x-rays from the x-ray beam. Results in a higher energy beam. Added filtration in the dental x-ray tubehead results in a more penetrating useful beam.

In panoramic imaging, the pivotal point, or axis, around which the cassette carrier and x-ray tubehead rotate is termed a

rotation center.

Which of the following is the least sensitive to x-rays?

salvilary glands

The "S" in the mnemonic SLOB stands for

same

The range of useful densities seen on a dental image is termed the

scale of contrast.

When exposing a molar bite-wing radiograph, the ____________ molar should be centered.

second

The internal oblique ridge extends from the third molar region to the ____________ area.

second premolar

For the mandibular molar exposure, the mesial edge of the receptor should be aligned with the midline of the

second premolar. For the mandibular molar exposure, the front edge of the receptor should be aligned with the midline of the second premolar.

A _________ is a bony wall or partition that divides two spaces or cavities.

septum

The nasal _______, which consists of bone and cartilage, separates the nasal cavity into the two halves.

septum

If you are using size 1 receptors, how many exposures will you need to take of the anterior teeth?

seven

Foreshortened images refer to images of the teeth that appear _________. Foreshortening of images results from ___________ vertical angulation.

shortened; excessive Foreshortened images refer to images of the teeth that appear shortened. Foreshortening of images results from excessive vertical angulation.

X-ray wavelengths with the greatest energy and usefulness are:

shorter

Digital imaging improves patient education because you can

show the patient his own periapical, bite-wing, or extraoral images on a computer monitor or television screen.

When adjusting the horizontal angulation, the PID is moved ___________. When adjusting the vertical angulation, the PID is moved ______________.

side-to-side; up-and-down

If you are using size 2 receptors, how many exposures will you need to take of the anterior teeth?

six With a size 2 receptor, a total of six anterior receptor placements are used with the paralleling technique.

You have a 4-year-old boy in your chair, which size receptor will you need to use to take bite-wing images on him?

size 0

In the adult patient, which size receptor is recommended for bite-wing exposures?

size 2

Which size bite-wing receptor may be placed in a horizontal or vertical position?

size 2

Conventional film is placed so that the raised dot is in the ______. (Answer with acronym.)

slot

Chronic radiation exposure occurs when:

small doses of radiation are received over a long time period

The gag reflex is elicited by stimulation of the sensitive tissues of the

soft palate.

The lateral pterygoid plate is a wing-shaped bony projection of the __________ bone.

sphenoid

Cancellous bone is the soft, ________ bone located between two layers of _______ cortical bone.

spongy; dense Cancellous bone is the soft, spongy bone located between two layers of dense cortical bone.

Which of the following types of position-indicating devices (PIDs) produces scatter radiation?

square Rectangular PIDs do not produce scatter radiation. Conical PIDs do produce scatter radiation. Round PIDs do not produce scatter radiation PIDs are not square. Rectangular and round PIDs do not produce scatter radiation.

Reusable receptor holders must be _________________ after each use.

sterilized Reusable receptor holders must be sterilized after each use; rinsing with tap water is insufficient; wiping with disinfectant is inadequate; placing in an immersion disinfectant is insufficient.

Metallic restorations may eliminate or hide the surrounding anatomy with the appearance of

streak artifacts.

On a panoramic image, the ear is viewed superimposed over the

styloid process

The _____________ is a long, thin, pointed process below the external auditory meatus.

styloid process The styloid process is a long, pointed, and sharp projection of bone that extends downward from the inferior surface of the temporal bone. The glenoid fossa is a concave, depressed area of the temporal bone located anterior to the mastoid process and the external auditory meatus. The articular eminence is a rounded projection of the temporal bone located anterior to the glenoid fossa. The lateral pterygoid plate is a thin, wing-shaped bony extension of the sphenoid bone located distal to the maxillary tuberosity region.

The ______________ is found in the submandibular fossa.

submandibular salivary gland

The patient's head and neck are tipped back as far as possible for the _____________ projection.

submentovertex

Your patient thinks she has fractured her zygomatic arch. Which of the following projections would you take?

submentovertex

The purpose of the transcranial projection is to evaluate the articular eminence and _________ surface of the condyle.

superior

Which of the following landmarks would appear radiolucent on a dental image?

suture

Image magnification can be decreased when the _______________ is increased.

target receptor

The anterior teeth will appear "fat" if the

teeth are positioned too far back on the bite-block.

The anterior teeth will appear "skinny" if the

teeth are positioned too far forward on the bite-block.

Uranium is an example of __________ radiation.

terrestial Uranium is an example of terrestrial radiation; cosmic radiation originates from the stars and sun. Uranium is a form of naturally occurring terrestrial background radiation. Computer screens, a consumer product, are an example of artificial or human-made radiation. Water supplies containing radon that a person consumes are an example of internal radiation.

Critical instruments are defined as instruments

that are used to penetrate soft tissue or bone.

A cone-cut occurs when

the PID was not properly aligned with the periapical receptor holder.

The term facilitation means

the act of making easier.

The bite-wing film shows:

the crowns of maxillary and mandibular teeth

Original dental images are the property of

the dentist

During an exposure

the exposure button is firmly depressed until the preset exposure time is completed. The exposure button is firmly depressed until the preset exposure time is completed. The exposure light on the control panel is illuminated for the duration of the exposure. The beep sounds to signal completion of the exposure.

A disadvantage of panoramic dental imaging when contrasted with intraoral dental imaging is

the images seen on a panoramic image are not as sharp as those on intraoral images because of the intensifying screens.

The frequency for taking images on your pediatric patients should be based on

the individual needs of the child.

The kVp represents

the maximum or peak voltage of an alternating current.

It is questionable whether digital images can be used as evidence in lawsuits, because

the original digital image can be enhanced.

Density is defined as

the overall blackness or darkness of an image.

Communication is defined in the text as

the process by which information is exchanged between two or more persons.

The traditional unit of dose is called

the radiation absorbed dose (rad). The roentgen is the traditional unit of exposure for x-rays; the traditional unit of dose is the rad. The traditional unit of dose is called the rad. The rem is the traditional unit of the dose equivalent; the traditional unit of dose is the rad. The gray is the SI unit equivalent to the rad; the traditional unit of dose is the rad.

The cause of an excessive margin of receptor edge (which appears as a black band) on a nondiagnostic periapical image is

the receptor was not positioned in the patient's mouth to cover the apical regions of the teeth.

The SI equivalent of the rem is

the sievert

To correct a dental image where apices do not appear,

the teeth being imaged must be firmly in contact with the bite-block.

Short teeth with blunted roots appear on the image when

the vertical angulation is excessive.

Long, distorted teeth appear on the image when

the vertical angulation is insufficient.

To answer questions about the necessity of dental images, tell the patient

there are many diseases and conditions that cannot be detected simply by looking into the mouth.

Blurred images appear on the dental image when

there is patient movement.

A grid is composed of a series of

thin lead strips

Structures are clearly demonstrated on a panoramic image in a _____________ zone.

three-dimensional curved

With CBCT, the divergent rays exit the machine and some of the radiation is attenuated by the patient. In this statement, attenuated means

to intensify

In panoramic imaging, the movement of the receptor and the tubehead produces an image through the process known as

tomography.

Radiolucent shadow over the apices of the maxillary teeth

tongue not raised to thepalate

Elongated images refer to images of the teeth that appear __________. Elongation of images results from _____________ vertical angulation.

too long; insufficient Elongated images refer to images of the teeth that appear too long. Elongation of images results from insufficient vertical angulation.

A beam alignment device can be used to help the dental radiographer position the PID in relation to the _____________ and the receptor.

tooth A beam alignment device can be used to help the dental radiographer position the PID in relation to the tooth and receptor. The control panel, which allows the dental radiographer to regulate the x-ray beam, is plugged into an electrical outlet and appears as a console or cabinet. The extension arm suspends the x-ray tubehead, houses the electrical wires, and allows for movement and positioning of the tubehead. A collimating device may be retrofitted onto the end of a standard PID to restrict the size of the x-ray beam and limit radiation exposure.

___________ refers to the total amount of radiation that is received or absorbed.

total dose

The indirect theory proposes that

toxins are created from the formation of free radicals. The indirect theory proposes that free radicals combine to form toxins. The direct theory proposes that ionizing radiation directly hits critical areas within cells. Indirect injuries occur more frequently than direct injuries. The direct theory proposes that the deoxyribonucleic acid (DNA) of a cell is damaged during radiation exposure.

When using films with a plastic barrier, the protective barrier should be removed in the BLANK with BLANK.

treatment room / gloves

A complete full-mouth series can consist of as few as 10 films and as many as 18 films.

true

A panoramic image is an extraoral x-ray that the dentist uses to view the entire dentition and related structures on a single large film.

true

Any exposure to radiation, no matter how small an amount, has the potential to cause harmful biologic changes in the operator and the patient.

true

Automatic film processing significantly reduces processing time.

true

Digital radiography exposure times are 50% to 80% less than conventional radiography times.

true

Electrons are generated in the x-ray tubehead at the cathode.

true

Ionization is the harmful effect of x-rays, resulting in a disruption of cellular structure and permanent damage to living cells.

true

Radiation exposure is measured in SI units as coulombs per kilogram, or in Roentgens in the traditional system.

true

The Consumer Patient Radiation Health and Safety Act is a federal law that establishes guidelines for the proper maintenance of x-ray equipment and requires those taking dental radiographs to be properly trained and certified.

true

The dentist is responsible for prescribing or ordering dental radiographs for the patient and should evaluate each patient according to the patient's individual needs.

true

The faster the speed of the film, the less radiation is needed for each exposure.

true

The latent image on a film becomes visible after the film is processed in a darkroom.

true

The most common causes of automatic processor breakdown are the failure to keep the rollers clean and inadequate replenishing of chemicals.

true

The oil in the x-ray tube absorbs about 99% of the energy; the other 1% exits the tubehead as x-rays that move toward the patient's mouth.

true

The role of the computer in digital radiography is to store the incoming electronic signal and convert it from the sensor to shades of gray that are viewed on the computer monitor.

true

The term object-film distance (OFD) describes the distance between the teeth being radiographed and the radiographic film.

true

When using the paralleling technique, the film must be positioned parallel to the long axis of the tooth in a film holder placed away from the teeth and toward the middle of the mouth.

true

When using the occlusal technique, the receptor is positioned with the _______ side facing the arch that is being exposed, and the receptor is placed in the mouth ______.

tube; between the occlusal surfaces of the maxillary and mandibular teeth

The position-indicating device (PID) is an extension of the

tubehead. The PID is an extension of the tubehead. The extension arm supports the x-ray tubehead. The control panel allows the dental radiographer to regulate the x-ray beam. The exposure button activates the machine to produce x-rays.

Thermionic emission of electrons occurs at the

tungsten filament in the cathode. Thermionic emission of electrons occurs at the tungsten filament in the cathode; the copper stem functions as a heat sink for the tungsten target; the molybdenum cup focuses the electrons into a narrow beam.

Within the x-ray tube, electrons are generated by the

tungsten filament in the cathode. Within the x-ray tube, electrons are generated by the tungsten filament in the cathode. The molybdenum cup focuses the electrons into a narrow beam and directs the beam across the tube toward the tungsten target of the anode. The copper stem functions to dissipate heat away from the tungsten target.

A cassette has ________ intensifying screen(s).

two

The dental image is a _______-dimensional picture of a _______-dimensional object.

two;three

When placing the receptor in the mandibular premolar region, the receptor must be placed ________ the tongue. When inserting the receptor holder into the mouth, the receptor is tipped __________ the tongue.

under;away from When placing the receptor in the mandibular premolar region, the receptor must be placed under the tongue. When inserting the receptor holder into the mouth, the receptor is tipped away from the tongue.

The American Dental Association (ADA) recommends mounting radiographs with the dot BLANK.

up

The beam should be directed _______________ degrees for the ramus of the mandible projection.

upward at 15 to 20

Two indicators that will help you in determining which way to mount bite-wing radiographs are (1) the curve of Spee curves _______________ toward the distal, and (2) mandibular molars have __________ distinct roots.

upward; two

The best way to limit exposure to a patient's hands and fingers is to:

use a film-holding device

Storage phosphor imaging

uses a reusable imaging plate.

The film/sensor is placed in a ________ position for anterior projections.

vertical

Nutrient canals appear as ______________ lines on a periapical image.

vertical radiolucent

According to the text, a size 1 receptor is always positioned with the long portion of the receptor in a ____________ direction, and a size 2 receptor is always positioned with the long portion of the receptor in a ______________ direction.

vertical; horizontal According to the text, a size 1 receptor is always positioned with the long portion of the receptor in a vertical direction, and a size 2 receptor is always positioned with the long portion of the receptor in a horizontal direction.

Your 35-year-old patient has clinical attachment loss in the posterior teeth. What type of bite-wing images should you take, and what size receptor should you use?

vertical;2

A dental image that has ______________ is said to have high contrast.

very dark areas and very light areas

According to the text, the size of the film mount should correspond to the size of the

viewbox According to the text, the size of the film mount should correspond to the size of the viewbox. The patient chart can accommodate a wide variety of film mounts. It is important to purchase mailing envelopes that can hold the largest size of mount used in the dental office. It does not bear any correlation to the size or capacity of the processor.

______________ is a measurement of force that refers to the potential difference between two electrical charges.

voltage Exposure time refers to the interval of time during which x-rays are produced. Wavelength can be defined as the distance between the crest of one wave and the crest of the next wave. Voltage is a measurement of force that refers to the potential difference between two electrical charges. Ampere is the unit of measure used to describe the number of electrons, or current, flowing through the cathode filament.

Your new patient has asked if you could use the images from his previous dentist. You should tell your patient that

you can accept the image if they were taken recently and are of acceptable quality.

Your patient is really concerned about getting cancer from dental images. You can relieve her fears because ___________ people have gotten cancer from dental x-rays.

zero

Upper molar exposure

zygomatic process


Ensembles d'études connexes

Mrs. Brock west europe test review

View Set

Geology 1104 Final Laura Mallard

View Set

Hormones of the Human Reproductive System

View Set

Envsci101, Lecture 1, Biodiversity

View Set

Pharmacology Midterm Test Bank 1

View Set